How to go to the router trend. Connection to the Trendnet Tew 432BRP router computer

Trendnet routers configure

The speed of data transmission via Wi-Fi (wireless) is very dependent on extraneous interference and is determined in specific cases separately. Details here.

Wi-Fi. A wireless connection can be a “narrow place” that does not allow to get the maximum Internet access speed.

What depends on the speed of Wi-Fi connection?

one.one. Standard. Equipment manufacturers for advertising indicate on the boxes of their devices the maximum theoretically possible speed that the buyer in practical work cannot receive. The table shows the speed values ​​depending on the wireless connection standard.

Standard 802.11ac is in development. The first versions of the devices are already available on the market and show good performance. In the future, manufacturers promise even higher rates.

one.2. Compatibility of the router and terminal device. For example, if your router operates according to the standard N, and the Wi-Fi laptop adapter is 802.11G, then the connection between these devices will be 802.11G. In addition, equipment of different manufacturers having one standard can have good or vice versa poor compatibility.

one.3. Obstacles that create devices operating at frequencies 2.4/5 GHz. For example, household appliances or other Wi-Fi routers installed nearby.

one.four. Obstacles (doors, walls) between the router and the subscriber device weaken the signal, which leads to a decrease in the speed of work.

Malicious programs (viruses) often lead to “inhibiting” the computer and reduce its performance. When measuring speed, you need to make sure that there are no viruses on the computer.

Firewall or Package filter. The program designed to improve computer security. When transmitting data with high speed, this program can consume a large number of computer computing resources. At the time of speed measurement, we recommend turning off firewall.

In old and slow processors such as Intel Celeron, Atom may not be enough computing power. Your computer’s performance should be sufficient to transmit data at high speed.

Overloading of the Internet or remote server areas.

For the full operation of the router, it is necessary to fulfill all the management points!

Change the parameters of the TCP/IP protocol of the network card at the computer to automatically obtain the values ​​of the IP address and the server DNS (DNS) for automatic (DHCP) for example in Windows 7. Then it is necessary to enable the power adapter in the electric power.

Connect the device to the computer with a wire that is supplied with the “LAN” Port one of four.

The Internet wire (laid from the corridor) connect to “WAN”. To a characteristic mechanical click

Open the IE browser and type in the address 192.168.ten.one.

Next, click Enter (input) or transition. Enter the username and password (by default the user name-Admin, password-Admin) and we get on the Web-interweiss router settings.

We advise you to leave the user name. admin, password. admin since The router (router) is not available by default from outside (Internet).

If you suppose to use remote access to the router (router), we strongly do not recommend leaving the default password “Admin”.

Remember or write down a new administrator password. In case of loss of the new administrator password, you can access the router settings only after the default factory settings are restored using the Reset hardware button. This procedure will destroy all the settings you set the router

Choosing the main settings of WAN. In the column (type of connection), select pppoe.

Next, put the point opposite the field to get an IP address automatically

We fill out the fields: User name: Password: Password confirmation:

Next, click the application button

Next, select the Wi-Fi item network basic settings

We install the point on the contrary to enable Wi-Fi network

Fill in the field: SSID: Wi-Fi network operating mode: select from list 2.4 GHz mixed mode 801.11b/g/Nshirina Canal: select from the list of cars 20/40 MHz

Next, click the application button.

Next, select the wi-fi item network protection

Authentication algorithm: select from the WPA2V list PSK/EAP, set the point opposite PSK. Cryption Field set the point opposite AES in the field write the key in the key confirmation of the key. We write

Trendnet Tew 651BRP settings

After we connected the router, let’s sit down at the computer and start setting up. First, we need to go to the settings integer. To do this, we will open any browser (opera, Google chrome, Yandex Browser, and T.P). In the address bar of the browser we collect 192.168.ten.1 and click “Enter”. A window of authorizations will open before us, where they ask us to enter a login and password, by default it is admin/admin. Enter and click on the entrance button.

Setting up Internet connection Trendnet Tew 651BRP

Having entered the router settings, many suggest changing the password, but I believe that the most important thing is to start to configure the Internet connection. Let’s look at the most popular types of compounds.

To begin with, we need to go to the Main Basic Main menu section and select “WAN” item. In the falling menu “Connection Type” we will choose the type of connection.

PPTP connection setting

To configure the type of PPTP connection, we enter the following data:

• “Connection Type”. select Russia pptp.
• In the field “Server IP” we enter the VPN server address.
• In the “PPTP Account” fields, the user and “PPTP Password”- the user password, “PPTP RETYPE PASSWORD”- password confirmation. We are taking data, they must be indicated in the contract or call those support.
• We put an end to the Auto-Raconnect field opposite the inscription “Always-on”
• If your provider provides this type of connection with a static IP address. You will need to put a point opposite “Static IP” and fill out the corresponding fields.
• After that, click the “Apply” button

Setting L2TP connection

This type of connection is also adjusted, like PPTP, but is a newer type of connection. To set up the same action, only in the “Connection Type” section will we choose Russia L2TP.

• “Connection Type”. select Russia L2TP.
• In the field “Server IP” we enter the VPN server address.
• In the “L2TP Account” fields, the user and “PPTP Password”- the user password, “L2TP RETYPE Password”- password confirmation. We enter the data, they must be indicated in the contract or call those support.
• We put an end to the Auto-Raconnect field opposite the inscription “Always-on”
• If your provider provides this type of connection with a static IP address, you will need to fill out the corresponding fields.
• After that, click the “Apply” button

Setting PPPOE Connection

This is one of the most popular types of connection among providers. Tuned by introducing the user and password and all, no additional settings. Let’s see how to implement this type of connection.

• “Connection Type”. select pppoe.
• In the fields of “User Name”- user and “Password”- user password, Retype Password- password confirmation. We enter the data, they must be indicated in the contract or call those support.
• We put an end to the Auto-Raconnect field opposite the inscription “Always-on”

Authorization and change of password

To open the door to the configurator of the device, you need to connect the marchutizer to the computer in the usual way, that is, through the LAN cable between the PC LAN ports and the device itself, and stick the cord from the provider in the WAN connector on the rear wall of the router. Then we launch a browser on PC and enter the standard Trendnet IR address: 192.168.ten.one. The authorization window will immediately appear:

In the user and password fields you need to enter “admin”. As a result, we will open access to any settings. The first thing to do is change the password to the device from the “Admin” value to some other. To do this, go to the “Main” = “Password” section and change the password there. This is how it looks:

Do not forget to save the changes made by clicking on the “Apply” button. After this minor work, we start setting up Wi-Fi.

We configure the wireless network

Now our Trendnet router is almost ready to work. It remains only to set up the Internet. This action depends on the type of connection with the provider. Below we give explanatory pictures for configuration, taking into account the type of connection.

Here, perhaps, is all you need to know about setting up the router of the Trendnet model.

If you are not very well versed in computer networks and types of connection, call your operator at Support. There they will tell you which of the above options to choose.

You can do otherwise. look into the contract with the Internet supplier.

How to go to the router trend

Preparation for the setting of a router.

There are five ports on the rear panel of the router, one of which is indicated by WAN or Internet. it is necessary to connect the provider cable to it. One of the LAN ports indicated by the numbers, combine the cable included in the router with a network connector of a computer or laptop. With initial setting, it is better to use a wired connection, this will reduce the number of nuances, due to which difficulties may arise.

In the connection settings on the local network on the computer, in the parameters of the TCP/IP protocol, “receive IP automatically” and “connect to the DNS server automatically”. Now you can start setting up a router.

Trendnet router setup

Open our browser (Internet Explorer, Google Chrome, Mozilla Firefox, Opera, Safari or any other) and drive the router’s address in the address line: 192.168.one.1 and press Enter. A window with a request user “User Name” and password “Password” should appear, in the first and second field we enter the word “admin” and click the “log in” button (input).

In the router intended, we select the Main tab on the left side, select “WAN” below the list below the list.We fill out the following parameters: in the line “Connection Type” you need to select the type of connection- DHCP Client or Fixed IP (DHCP or Static IP).In “Wan IP” we put a checkmark-SPECIFY IP we write more-IP address, network mask, main gateway, DNS1 and DNS2.And click “Apply”.

Start writing or press / to select a block

We proceed to setting up a wireless network. In the column on the left, click “Wireless”, in the list we opened, select “Basic”. Wireless parameter: put the point “Enabled” field “SSID”: enter the name of the wireless network. Press the “Apply” button below.

Start writing or press / to select a block

Further on the left in the menu select “Security” and set the parameters: “AuthenticationType”- WPAUUTO “PSK/EAP”- PSK “Ciphertype”- TKIP “Passphrase”- enter the password of our wireless network, which should consist of eight characters and numbers.”Confirmed Passphrase”. Repeat the password.Press the “Apply” button below.

Start writing or press / to select a block

After the setting, it is recommended to save them so that in case of problems, it was possible to restore them. To do this, go to the Tools tab, the Settings menu. To save the current router settings, click the “Save” button. The settings file will be saved in the indicated place on the hard disk. Settings are completed, check the Internet.

Setting Wi-Fi

Setting a wireless mode for this device is also easy. First go to the Basic tab Wireless section. It is important to set a number of configuration parameters:

Network protection is an important option that will not allow an unauthorized way to enter the network. On the Security tab of the same section, you can set the required security parameters:

Save changes to start using Wi-Fi.

Settings PRRROE:

Trendnet Tew 432BRP router is stitched very quickly. The device is updated only through a cable connection, so never do this on Wi-Fi.

Go to Device Information in the STATUS section. There you can find out information about the version of your. Now find out the exact audit of the device (sticker at the bottom of the router).

At the next stage, you need to download the update on the developer’s website. Remove it on PC.

Then, in the Firmware tab, Tools Section Enter the Path to the Microdrogram and click Upgrade. At the finish, the router will restart on its own. The firmware is updated!

Wi-Fi wireless network setup

Together with the router, a network cable includes it to connect it to a computer network card. There is also a power supply and user guide. In general, the supply is standard.

The first thing we do was to connect to the LAN port of the router (through the cable that is included) the exit from the computer network card. As a rule, a small cable is in the set with a router, if you plan to place a router somehow not standardly and far from the computer, you may need to buy a separate cable in the store, or spend it in the house and squeeze the RJ45 connectors yourself.

Connect your Internet cable to WAN Porto Router. By the way, after the connection, LEDs should begin to flicker on the device case.

Please note that on the router, on the back wall, there is a special reset button. it will come in handy if you forget passwords from access to the control panel or want to drop all the settings and parameters of the device.

After the router was connected to the computer via network cable (this is important, t.to. Initially, the Wi-Fi network can be completely turned off and you cannot go to the settings)-you can start setting Wi-Fi.

Come in: http: // 192.168.ten.1 (default address for Trendnet routers).

Introduce the password and login Admin in small lowercase Latin letters, without any points, quotes and dashes. Next, press Enter.

If everything was done correctly, the router settings window will open. We go to the Wi-Fi wireless connection settings section: Wireless-Basic.

1) Wireless: be sure to put the slider in the Enabled position, t.e. This includes wireless network.

2) SSID: Wash the name of your wireless network here. When you look for it to connect on a laptop (for example), you will navigate just on this name.

3) Auto Channel: As a rule, the network works more stable.

4) SSID BroadCast: Put the slider in the Enabled position.

After that, you can save the settings (Apply).

After setting the main settings, it is also necessary to protect the Wi-Fi network from the access of foreign users. To do this, go to the section: Wireless. Securance.

Here you need to choose an authentication type, and then enter a password for access (Passphrase). I recommend choosing a WPA or WPA 2 type.

Internet access setup

As a rule, in this step we need to make settings from your contract with an Internet provider (or a leaf for access, which usually always goes along with the contract) in the router settings. To disassemble in this step all cases and types of connection that different Internet providers may have is unrealistic! But show in which tab to enter the parameters is worth it.

Go to the main settings: Basic. Wan (translated as global, t.e. the Internet).

Each line is important in this tab, if you are mistaken somewhere or enter the wrong numbers-the Internet will not work.

Connection Type. Choose the type of Connect. Many Internet providers have type PPPOE (if you choose it, you will need to enter only login and password for access), some of the providers have access to L2TP, sometimes there is a type such as DHCP Client.

Wan IP. here you also need to know whether the IP will be given automatically, or you need to enter a certain IP address, a subnet mask, etc.

Mac Address. each network adapter has its own unique MAC address. Some providers record MAC addresses. Therefore, if you used to be connected to the Internet through another router or directly to the computer network card, you need to find out the previous MAC address and add it to this line. About how to clone the MAC address, we have already mentioned on the pages of the blog.

After the settings carried out, click on Apply (save them) and restart the router. If everything set up normally, then the router connects to the Internet and begins to distribute it to all devices connected to it.

Perhaps you will be interested in an article on how to configure a laptop to connect to a router.

Trendnet Wi-Fi Settings

To configure the Wi-Fi Trendnet Wi-Fi, you need to choose a Wireless item in the left menu, and then click on the Basic subparagraph. In the window that opens, it is necessary to set the values ​​as in the figure below. Turn on wireless, put there Enabled. The name of your network is introduced in the SSID field. If desired, it can be left without change. To save the settings, press the Apply button.

After that, you need to configure the network security parameters to protect the network from unauthorized intrusions. To do this, you need to go to the Security menu item and perform settings, as in the figure below. In the Passphrase field you enter a set of numbers (from 8 to 63). This password must be recorded. In the future, to connect the network, you will use it.

After that, configure the Internet connection on the router. To do this, select the Main item in the router menu and there is an subparagraph WAN.

To configure the pppoe connection, you need to enter the necessary values, as in the picture below. In the USR NAME field, you need to enter the password indicated in the contract. And in the USR NAME field you must introduce your user login specified in the contract respectively.

When you make all these settings, it is advisable to save them so that you can further perform their restoration if you need it. To make such a conservation go to the Tools point and select Settings there. In the window that opens, if you need to save the current settings, click on the Save button. After that, a file with settings will be stored on your hard drive. If in the future you will need to restore the settings, then you need to click on the file in Load Settings and then select the file with the settings. After that, click on the Load button and the data will be loaded. If you need to drop the settings to the factory, then the Restore button is used for this.

Trendnet Tew 432BRP settings

Now let’s take on the settings integration. To do this, we will open any browser (opera, Google chrome, Yandex Browser, and T.P). In the address bar of the browser we introduce 192.168.ten.1 and click “Enter”. We will open the authorization window, where we are asked to enter the login. admin and password. admin. Then click on the entrance button.

Internet setting Trendnet Tew 432BRP

Many recommend that you change the standard password before setting to setting up the router. I believe that the most important thing at the beginning is the Internet on the router. Let’s look at how to do it.

To begin with, we need to go to the Main Basic Main menu section and select “WAN” item. In the falling menu “Connection Type” we will choose the type of connection.

Setting PPTP connection

To configure the type PPTP, we enter the following data:

• “Connection Type”. select Russia pptp.
• In the field “Server IP” we enter the VPN server address.
• In the “PPTP Account” fields, the user and “PPTP Password”- the user password, “PPTP RETYPE PASSWORD”- password confirmation. We enter the data, they must be indicated in the contract or call those support.
• We put an end to the Auto-Raconnect field opposite the inscription “Always-on”.
• If your provider provides this type of connection with a static IP address. You will need to put a point opposite “Static IP” and fill out the corresponding fields.
• After that, click the “Apply” button.

Setting L2TP connection

This type of connection is also adjusted, like PPTP, but is a newer type of connection. To set up, we will perform the same actions, only in the “Connection Type” section will we choose Russia L2TP.

• “Connection Type”. select Russia L2TP.
• In the field “Server IP” we enter the VPN server address.
• In the “L2TP Account” fields, the user and “PPTP Password”- the user password, “L2TP RETYPE Password”- password confirmation. We are taking data, they must be indicated in the contract or call those support.
• We put the point of the Auto-Raconnect field opposite the inscription “Always-on”.
• If your provider provides this type of connection with a static IP address, you will need to fill out the corresponding fields.
• After that, click the “Apply” button.

Setting PPPOE Connection

This is one of the most popular types of connection among providers. Sets up by introducing the user and password, and all, no additional settings. Let’s see how to implement this type of connection.

• “Connection Type”. select pppoe.
• In the fields of “User Name”- user and “Password”- user password, Retype Password- password confirmation. We enter the data, they must be indicated in the contract or call those support.
• We put an end to the Auto-Raconnect field opposite the inscription “Always-on”

Wi-Fi setting on the Trendnet Tew 652BRP router

After connecting and setting up the Internet, you need to configure Wi-Fi connection. To configure Wi-Fi, go to the “Wireless” section and select “BASIC”. At the “Wireless” point “Basic”, we put an end to “Enable”. Now, in the Name field (SSID), we indicate that you want to see in the list of network connections. And click “Apply”.

Then we move on to the section “Security” and select in the “Authentication Type” item. WPA2. In the field “Passphrase:” we introduce the authorization key that you want, but not less than 8 characters and using the Latin alphabet. “Confirmed Passphrase”. confirm the activation keys. And click “Apply”

The setting of the router is completed on this. You can use your wireless network.

For clarity of the settings process, I advise you to look

As written on the official website, in no case, do not update the firmware on Wi-Fi. This can lead to incorrigible errors.

Then go to the router settings and in the “Tools” section, select the “Firmware” item. After that, press the “Select the File” button, select the file that you downloaded with the extension ”.bin ”and click the“ Upgrade ”button.

Waiting for a couple of minutes while the router makes a full update of the firmware. After which the process will be completed.