How to find out the password of the connected Wi-Fi Android

How to find out the password from Wi-Fi on Android

After connecting to a wireless network using a smartphone, the password from it is not shown. You can recognize it with several bypass ways that are available to Android users. Some firmware supports the connection with Wi-Fi via a QR code, which also deserved attention in this material.

The main reason why you cannot view the password through the settings is associated with safety. So no one outsiders who gained access to the smartphone will be able to connect to Wi-Fi. Despite the difficulty to imagine that the attacker will be completely interested in this issue, this additional protection measure is really present in the phones. However, we can tell you about all the ways to see the password from Wi-Fi on Android, and what needs to be done on your device for this.

How to look at the password from Vifay without root

First, consider a simple way to find out the password from Vifai on the Samsung phone without hacking a smartphone and obtaining the rights of a super.Leaner.

Password from smartphone access point

If you need to distribute a network from the smartphone itself, look at the Wi-Fi password using standard phone functions. In many devices, it is easy to look at the code from Vifay in the settings. The algorithm is this:

So you can see the Wi-Fi password on the Samsung phone and write it down so as not to forget it later when it is needed again and connect the Internet on a PC or another phone.

Through the settings of the router

Another way to find out the key for Vifay on the Samsung phone is to enter the router settings and see the necessary data through the control panel. The algorithm is this:

• Go to “Connections” and click on an already connected network. Control router. You can immediately open the browser and drive combinations 192 into it.168.One.1, tplinlogin.Net, 192.168.One.0 and t. D. Information for the entrance can be viewed in the instructions, on the box or on the bottom of the router.
• After the transition to the authorization window, enter the login and password, which should also be given on the lower part of the router. Most often it is required to drive two words Admin and Admin (this information is set by default).

At the final stage, it remains to find out the password from Wi-Fi on the Samsung phone. The further modem setting algorithm depends on the manufacturer:

• For tp-Link, go to the wireless mode section. There, go into the wireless regime protection tab, and in the WPA/WPA2 section, it is easy to see the key to the wifting key.

After recovery, fix the data so that in the future they do not forget them. If you have previously changed data for entering the modem and do not remember it, reset the settings of the router. To do this, press and hold the cut button on the device or WPS/Reset. As a rule, discharge is carried out after 10-12 seconds. If the button is in the deepening of the router, use a clip or other sharp object. After resetting the settings, you can enter new data and already fix it in a separate place.

Alternative method through PC

Above, we examined how to find out the password from Vifay on the Samsung phone. But this option does not always suit. As an alternative, you can install the WirelessKeyView program and use it to obtain interests of interest. To do this, start by behalf of the administrator on the PC, to which the router is connected. In the list of networks, find the Key section, from where and rewrite the key.

Applications for viewing passwords from wi-fi on the phone

There are special applications with which you can access the code from the desired Wi-Fi network. The following programs are widely known:

• Wi-Fi Key Recovery. This is a free application that needs to be downloaded and installed on the phone. After carrying out all the necessary procedures, you get the rights of a “superpoler”, which will allow you to detect ciphers of available wireless networks.
• Wi-Fi Passwords [Root]. It also needs to be downloaded from the Play Market and install it on the phone. Next, the application must be opened, after which-give confirmation for the provision of Root-laws. After that, a window will appear with all available connections. You just need to choose the required network to access the password.

Other applications that can be used:

The choice is quite large, so each user will be able to find the most optimal application for himself.

How to look at the password from Android: 3 Комментарии и мнения владельцев

How to see a Wi-Fi password on Android Samsung? I don’t want to do Root

Good afternoon. The conditions and methods described in the article are suitable for all devices operating on Android, including Sumsung devices. In your case, you need to use the website of the home router-details in the article.

To be honest, I was looking for how to find a password from previously connected by Wi Faya on PC, and found it, thanks!

How to find out the password from the “wi-fay” on the phone from someone else’s network

Using special software, it is possible to easily find out the password from someone else’s router and Wi-Fi network. For this, hacking methods are used and for obvious reasons, without the knowledge of the owner, these are unlawful actions. But the question is not in ethics or moral principles: to do this is quite real, and not particularly bothering. There are a great many such applications on Google Play, despite the apparent illegality of such actions.

Wi-Fi Unlocker

The best, according to users, an application for these purposes. It is available in different languages, there is a completely Russian.Speaking version. As indicated in the description to the application, the principle of its action is the restoration of factory codes, which allows you to choose safety keys for “Wi-Fi”. But if you discard all the sentiments, Unlocker is a banal password cracker, he does it just masterly in a kilometer radius. Wi-Fi Unlocker has a simple and convenient integration, an effectively functioning generator, but if it encounters serious protection, several attempts will be required to connect.

To connect to closed “Wi-Fi” networks, you need to open Wi-Fi Unlocker with a simple touch on the icon. Select the desired network name from the list and click on it.

The list of wireless networks indicates the MAC address of the device and the encryption level. The program will quickly select the access key, it will take a few minutes. In the presence of weak passwords. A few seconds. After scanning the selected connection for issuing a PIN code:

Applying this key, the user is able to connect to someone else’s wireless network “Wi-Fi“.

After a successful connection, the data is stored in the memory of the program. And at the next attempt to contact the global network, there is no need to go through the entire stage again. It is easy to choose a “familiar”:

It is possible to use it not only for hacking. Unlocker. An advanced compound manager, multifunctional, while using some resources.

Wi-Fi Hack Password

Hack Wi-Fi Password is an application that works on the same principle as Wi-Fi Unlocker, but is very inferior to it in effectiveness. Knowledgeable users call it a mediocre “Wi-Fi” tesker, rarely coping with the task. To do this, it is too outdated, capable of calculating the password for access to the wireless network by simple pure. Hack Wi-Fi Password uses the most famous when selecting codes: Password, Pass, 123456, or 1234 and so on. Launch the application and select the necessary wireless network “Wi-Fi”:

Next, the password selection process will start:

If the hack was successful, the user will be connected to this network.

Hack Wi-Fi Password works without a gloss, but quite simple, trying to “guess” the password to the Wi-Fi network by comparing the most popular access keys, as they say, by pumpkin. For these purposes, its database has half a thousand frequently used passwords to Wi-Fi. The application will only work if one of the passwords appears on the list, if it is not there, it will be completely useless, a lot of time will spend to no avail.

How to find out the password from Wi-Fi to which the phone is connected-1 method

In the first method, we will do without additional rights of the super sexman (Root Rights) on the mobile device. We will enter the router settings in order to see the Wi-Fi password there.

Turn on the browser on the device, enter the IP address of the router. On the vast majority of devices, one of the following addresses is used:

The IP address of the router can be found from the instructions, or see the address on the sticker glued to the case of the product.

A window opens in which you need to enter the user name and password.

In most cases, the login and password is identical by default: “admin” and “admin” (without quotation marks). In some cases, the login begins with a capital letter. Usually, users do not change authentication parameters to access the router settings, so it is likely that these parameters are suitable.

In the settings of the router, see the password from Wi Faya.

I use the TP-Link router, how to get a Wi-Fi password, I will show you using the example of this device:

• Open the “Wireless Main” tab, and then “Protection of the Wireless District”.
• In the “WPA/WPA2-Personal (recommended)” section, the Wi-Fi password will be displayed in the “Wireless Network Password” field.

If the router settings page are not optimized for viewing on a mobile device, turn the smartphone screen into the album orientation, increase the image scale on the phone screen.

On the routers of other manufacturers, enter the settings in a similar way, the settings integration will be different.

With this method, you can use the router application from the manufacturer of the device from the Google Play store, if any.

We look at the list of saved passwords

At the first launch of Wi-Fi Key Recovery, the application will request the so-called “Superuser Access” (Superwall access). Click “Grant” (provide) in a pop-up window, and you will be on the list containing all Wi-Fi networks, to which you have ever connected, where each record displays the password in the PSK field.

If you have connected to a large number of different Wi-Fi networks while using your Android device, your list in the application can be quite long. If so, you can use to look for a specific network using the SSID QuickSearch field (quick search by SSID).

We use third.Party programs

Third.Party programs allow you to view the configuration of individual networks. With their help, it will not be necessary to independently look for system files. All necessary information will appear in the utility and in the form of the table will be conveniently designed.

Such programs include Wi-Fi Key Recovery. The main software window shows data about the name of the phone manufacturer and the time of the last update of configuration files.

Information about Wi-Fi, the application displays automatically. Using a text field to search, the user will be able to find a specific Wi-Fi connection. It is enough to indicate the name of the desired network so that in the list of connections it is in the first place.

All connections are divided into separate blocks. Each of the blocks has the following parameters:

You can also distinguish the Wi-Fi IP and Password Explorer utility, which reads the data about which the Android smartphone is connected. It is enough to start the program and specify the required network. A window will be displayed in which the necessary information will be displayed.

Such programs operate on a single principle, but without root is not available. The essence of the procedure they conduct is automatically reading data from the mentioned file.

Repair engineer for mobile and computer equipment in a specialized service center, g. Moscow. Continuous experience from 2010.Have questions? Ask in the Комментарии и мнения владельцев to the article. I try to answer as quickly as possible to you in the indicated mail. Each case is individual and therefore it is very important that you write your problem as much as possible and what is your device model.

Good afternoon.Device: Huawei Media Pad M3 Lite (CPN-L09).Android 7.0.Recently (about a month) the shet plan has difficulties when connecting to Wi-Fi networks.When you turn on the Wi-Fi, the tablet finds the network, sees it, tries to key to it, but cannot do it.Writes, or: “Authentication is required.”, Or: Governing on Latin, such as” Violation of the security code.”(?).A month before that no such problems were observed.Thanks in advance.