How to factory reset redmi AirDots headphones

Cleaning the ear pads

Debris such as earwax, dust, or water droplets most often affects the sound in the earphone. You can clean the gadget at home in a few minutes.

We take the earbud and carefully remove the silicone ear cushion. We see a protective mesh. Lightly shake off the dirt from it and put it aside. We look inside the structure, which can also be clogged. Carefully clean everything with a cotton swab or needle. If there is moisture, wipe it off with a dry cloth. It is better not to dry with a hairdryer, as the water will get even deeper.

You don’t have to put the mesh back on. It does not help much against dirt, but the sound significantly degrades.

Removing the earphone on devices

Just open the Bluetooth settings on the device to which you have already connected these headphones, find them in the list of paired devices (my devices), click on (i) or the gear button next to the headphones and select “Delete device”, or “Forget this device”. If the list contains two headphones with “_R” and “_L” at the end of the name, delete both!

On iPhone / iPad and on Android devices, this is done in about the same way. Likewise, you can remove the headphones on a laptop in Windows settings. Below I will give links to instructions, where it is shown in more detail how to do this.

Resetting the settings

Resetting on Xiaomi Redmi AirDots and Earbuds is a separate topic altogether. One method is written in the instructions in the kit, other solutions are shown in the instructions on the Internet, but in practice (with my headphones) something completely incomprehensible happens. When you try to reset the settings, they seem to just turn off and on. The behavior of the indicators on the headphones can be different, but the method itself is the same.

  • We take out both headphones from the case.
  • Simultaneously press the button on each of the headphones and hold it for 15-20 seconds. It is advisable to press so that you can see the LEDs.
  • Putting the headphones back in the case.
  • We take it out of the case and connect the right earpiece to the device. It will be called “Mi True Wireless EBs Basic_R” or “Redmi AirDots_R”.
  • We take the headphones out of the case and turn them off by holding the button pressed on each earpiece for 5 seconds. The red indicator will light up and go out.
  • We hold down the keys on both headphones for 30-50 seconds. When the reset occurs, a beep should sound from the AirDots (two times).
  • We hide the headphones in the case, then we take them out, wait a few seconds and connect to the device.

How the AirDots headphones are synchronized: we take them out of the case or turn them on manually and the indicator is blinking actively on both headphones. After that, on the left earpiece, the indicator goes out, and on the right one continues to blink slowly. This means that the headphones are paired and ready to be connected. Mobile device pairing instructions: How to connect Redmi AirDots and Xiaomi Earbuds headphones to the phone? Instructions for connecting to laptops and PCs: We connect Xiaomi Redmi AirDots and Earbuds to a laptop or computer on Windows

If you have any questions, or you solved this problem in another way, write about it in the Комментарии и мнения владельцев.

How to fix

Above are detailed instructions for solving audio problems. Now, briefly about what to do in a given situation:

Cause Solution
Clogged membrane mesh Place the earphone with the net in water so that the speaker does not touch moisture. Rinse the mesh and leave to dry;
Damaged wire Assess the degree of damage. If the contact has moved away, then move the wire and plug. If the contact is broken, take the gadget to the service center;
Water hit Place the headphones next to a radiator or in a bag of rice and wait until they dry completely;
Software reason Adjust the sound balance on your computer or smartphone. If this does not help, then update the drivers.

When you turn on Xiaomi Bluetooth headphones, you have to sync them again

The reason usually lies in the fact that many third-party devices are regularly connected to the smartphone, or the headset itself is simultaneously tied to several sound sources. As a result, memory overflow occurs, which provokes the automatic deletion of previously saved information.

Connect wireless headphones to no more than 2-3 smartphones, and then this problem will not bother you.

What to do to connect Bluetooth headphones to your phone

After resetting the headphones that are not pairing with each other, place them in the case and recharge them so that the battery has a sufficient charge. The process of connecting AirDots headphones is actually quite simple. And it does not differ for iOS or Android devices. On any phone, this is done this way: after recharging, you need to get the headphones out of their case and, without touching the buttons, give the opportunity to find each other. It is enough to wait about 10 seconds. After that, turn on Bluetooth in your phone.

AirDots headphones are designed in such a way that they can work on two different devices independently of each other. Therefore, the list of devices connected via Bluetooth in the phone may display two: both left and right.

But in this case, they will not work correctly. Since when pairing synchronously, they should be displayed in the list as one right earphone. AirDots R. After turning on the bluetooth on the phone, select the right earphone in the list and check their work now.

If it was not possible to connect them now, then you did something wrong again.

Why AirDots headphones don’t pair with each other

But both Xiaomi Redmi AirDots do not want to play music in any way. This happens when we rely on our intuition without reading the instructions. Although in Russian it may not be included in the kit (you can find a Russian-language instruction at this link).

Headphones from different brands often have their own principle of pairing with a mobile phone or with another device via Bluetooth. By doing this, they emphasize their individuality and demand to draw the attention of users to this. Connection methods may also differ depending on the model. To find information for yours, exactly specify the characters from the name of the headphones.

Xiaomi Redmi AirDots do not pair with each other what to do?

Chinese manufacturers of digital devices create analogs of popular brands, but in a budget version. Therefore, such products are becoming popular. But, unfortunately, their quality decreases in proportion to the price. In this article, we will talk about the Xiaomi Redmi AirDots headphones, why they do not pair with each other, and what can be done in this case.

Factory reset Xiaomi Redmi AirDots

If you’ve already connected your headphones to your phone, chances are they won’t work in sync. Music sounds only from one. If you press the button of another earphone, the music starts to sound in it, but at the same time it stops sounding in the first one. And so it can go on forever. Let’s fix this. First, untie Redmi AirDots from your smartphone.

    We need to open the quick access menu and select the Bluetooth button or find this window through the main settings;

The manipulations with your mobile phone are over. Now let’s move on to setting up the headphones themselves. If Xiaomi Redmi AirDots still do not pair with each other, you need to reset them to factory settings. To do this, you need to take them out of the case and hold down the buttons simultaneously on both headphones.

Hold for more than 30 seconds, they should turn off accompanied by a long beep. This sound is played by each earbud.

Instruction for using Xiaomi Redmi AirDots earbuds

A wireless Bluetooth device from Xiaomi has a big advantage over other headphones. this is a case. It is a case for storing them, in which they will not be subject to mechanical stress, shock and other factors. The case is also a charger for AirDots or a power bank. It allows you to recharge your headphones multiple times when traveling. In this regard, the operating time of the device without recharging significantly increases. It is enough to raise the charge to the maximum on the case.

Each earphone is equipped with a mechanical button that controls playback. As well as control of some functions and capabilities of the wireless device. For example, you can use the button to answer voice calls on your phone. Or to pause the music playback in the smartphone player. press the button once. To continue playing music, press the button again.

You can easily turn off your device. To do this, press and hold the button of the right earbud for about 5 seconds. Now you know what to do if the Xiaomi Redmi AirDots headphones for some reason do not pair with each other. And also how to use a wireless gadget.

How to connect both Redmi AirDots headphones to the phone

It’s easy to connect Xiaomi Redmi headphones to your phone. The device is equipped with touch buttons that are located outside the two earbuds and simplify the pairing procedure:. Hold both earbuds until the indicator turns purple-red. This will indicate a successful factory reset Place the headset in the case and wait a couple of seconds for “ears to find each other.” If the right earbud blinks in a pale purple color, the pairing was successful In the Bluetooth settings of the phone, select the item “Mi AirDots Basic_R”. Initially, the smartphone will connect to the right earpiece, and then to the left.

How to connect headphones to a computer and disconnect them

To connect AirDots to a computer or laptop, you need to make sure that the devices support Bluetooth communication. Open the device search item in the Control Panel and wait for pairing. The setup process takes a couple of seconds, after which the user can freely listen to music or watch movies.

To disconnect pairing, you need to open the settings of your smartphone or computer, open the Bluetooth section, and find the desired device in the list of connected ones, click on the menu item “unlink or remove the device”.

Operating and charging time

Charging the case takes about 45 minutes. The headset charges a little faster, and a full charge lasts about 4 hours. A charged case is able to restore the battery level of two earbuds 3-4 times.

With the active use of two headphones, their autonomy reaches 4 hours. With alternating use, the operating time increases by 1 hour.

The difference between Redmi AirDots and AirDots

The first feature is the changed appearance and color of the device. Mi AirDots are produced in a classic style for the Chinese brand and have a white body color. And the new Redmi AirDots received a black version, which makes it more elegant.

The differences also affected the dimensions of the device. The Redmi product is slightly smaller than the Mi AirDots. This increases the wearing comfort of the accessory, eliminating unpleasant sensations during prolonged use. However, the charging case has become larger.

Both models are compatible with Bluetooth 5.0 and earlier. Support for the 5th generation increases the range, reduces power consumption, and also allows you to transfer large amounts of data without losing communication stability.

In terms of autonomy, the models do not differ. Each earbud houses a small 40mAh battery that provides about 4 hours of listening time. Using the charging case, you can charge the gadget up to 3-4 times. The total operating time reaches 12 hours.

Redmi AirDots manual. setup, control, charging

The Xiaomi Redmi AirDots wireless headset was presented along with the Redmi Note 7 Pro and Redmi 7 smartphones. The model has similarities with the previously announced Mi AirDots, while it has some differences. To understand the intricacies of setting up the accessory, the instruction of the Redmi AirDots headphones will help.

Management of incoming and outgoing calls

Since AirDots Redmi earbuds have high sound quality and are based on Bluetooth 5.0, they can be used for long conversations. Managing incoming and outgoing calls using the device is quite simple To dial a subscriber, you need to call the voice assistant by double-tapping the touch panel You can answer incoming calls with a single tap Long hold your finger on the touchpad drops an incoming call.

How to turn headphones on and off

Before connecting a gadget to external devices, you should figure out how they are turned on and off. Redmi AirDots instructions for activating the headphones:. Before using for the first time, you need to charge the case and headset Take the headphones out of the case, hold your finger on the touchpad for a few seconds. When the white indication appears, they will start up and are ready to use To disconnect the headset, hold your finger on the touchpad for a couple of seconds The second way to turn off is to put the headphones in the case, after which they are automatically deactivated.

How to tell if they are charged

A white indicator is used to confirm successful charging of the headphones. The appearance of a red signal indicates a discharge of the device.

All about charging Redmi AirDots

To charge the earbuds, you need to place them in a plastic case. Each of the earbuds has its own socket. It will not work to insert the headphones into the case by swapping the right and left positions. As soon as the “ears” are in place, the red indicators will light up. When charging is complete, the LEDs will change color to white.

It will take 1.5-2 hours to fully charge the dots in the case. It may be that on the left earpiece the indicator is white, but on the right it is still red. This is a normal situation, because the right “dots” in a pair is the main one, it discharges faster and needs more time to charge.

The case, since it is a charger, has a built-in battery, and it also needs to be charged. For this, the case has a mini-USB port, into which the corresponding cable is inserted. This cable is not included in the package, so you will have to purchase it separately.

The case also has a status indicator. When charging is required, it turns red, after fully charged (this process takes 2 hours), the color changes to white and the indicator turns off quickly.

Sometimes one or both earbuds cannot be charged. The reason may be trivial. the case battery is discharged. In this case, after being placed in the case, the headphones are not disconnected from the phone, pairing remains even if the case cover is closed. The second reason is the lack of contact between the earphone and the charging pad in the case. Check if you have removed the film from the dots, and also find out why the earphone does not sit completely in its socket. Perhaps the ear cushion or something else is interfering with this. Remove the ear pads and try inserting the headphones into the case without them. The charging problem can be resolved immediately. Then you will have to find new, more suitable silicone tips.

Operating instructions for Xiaomi Redmi AirDots wireless headphones

The era of mobile electronics continues to evolve. Today, wireless headphones have deservedly gained great popularity among users. Among the abundance of TWS headphone models on the market, products under the Xiaomi / Redmi brand stand out. It would not be an exaggeration to say that Redmi AirDots are a worthy alternative to expensive “earbuds” produced by Apple, Sony, Samsung and other manufacturers. In some countries they are marketed under the name Mi True Wireless Earbuds Basic, but the model is actually the same.

It is important to remember that great demand has led to the fact that in the same China, clones of Redmi AirDots are produced in large quantities. They are sold at a low price, and the quality of such accessories does not stand up to criticism. Be careful if you are going to buy headphones from Xiaomi for yourself or someone else as a gift.

Below we give detailed instructions for those who have just bought Air Dots, in which we will tell you how to use them.

AirDots control with multi-function button

The physical button on each of the earbuds can perform multiple functions.

  • Answer / end / reject incoming call
  • when a call comes in, tap the multifunction button once to answer the call;
  • during a phone call, press the multifunction button to end the connection;
  • when an unwanted call comes in, you can reset it by long pressing the multifunction button.
  • Play / Pause Music

When you are listening to music and want to pause or restart playback, you can perform this control by pressing the multifunction button.

When the headphones are in standby mode, press the multifunction button twice to call the digital assistant.

The phone must support the voice control function, the quick start mode (“wake up” the device) must be activated in the phone settings.

Xiaomi Redmi AirDots support voice control via Xiaoai, Siri and Google Assistant.

Redmi AirDots has support for third-party chat apps and voice input for iOS. Android devices use the built-in microphone by default, through which voice commands and responses from the digital assistant are sent.

Xiaomi Redmi AirDots headphones do not have a volume control function, this setting must be done on a smartphone. By the way, you can use the voice assistant to adjust the sound volume.

What’s in the box?

New Redmi Airdots are packed in a small oblong box made of blue cardboard. The box contains:

  • Charging case.
  • Headphones (in case) with M-size ear pads.
  • Interchangeable ear pads in sizes “S” and “L”.
  • Instruction manual in Chinese. Instructions in Russian are not included.

We recommend charging the case and wireless headphones before using for the first time. Remove the films from the case and from the contacts on the inserts (there can be only one of them).

How to Reset Pairing Redmi AirDots?

Step 1. Hold the multifunction button for 15 seconds until the indicator flashes red and white three times alternately, and then turns off. This will mean that the device was reset successfully.

Как сбросить настройки наушников Redmi AirDots

Step 2. In the list of Bluetooth connections on your smartphone, find the entry “Redmi AirDots_R” and delete it. Then complete the connection reset procedure.

First Steps to Establishing a Smartphone Connection

Step 1. Take both earbuds out of the charging case, they will automatically turn on immediately.

Step 2. Turn on the Bluetooth module on your smartphone. The search starts for nearby wireless devices. The line “Redmi AirDots_R” should appear in the list of found devices. This is the right earpiece, you need to start the connection with it, the left one will connect automatically.

  • If you put the earbuds back in the case, the red indicator will light up. Redmi AirDots will automatically disconnect from the phone.
  • If you take the headphones out of the case again, the white indicator will light up. AirDots will automatically reconnect to the smartphone.

You can connect “dots” via Bluetooth not only to a phone, but also to a PC and a laptop.

It often happens that when pairing, problems arise or after a while one of the headphones begins to lose connection, the sound appears and disappears in it. In any case, you will need to reset the connection. pairing and connecting to a mobile device.

Redmi AirDots Headset Control Apps

Also in the application you can see information about the battery consumption. In general, this application is more suitable for Xiaomi headphone models with touch controls (AirDots Pro, AirDots Youth Edition). Only one thing works on Redmi AirDots. viewing information about the battery, you will not be able to program the buttons. There is another application for this called MacroDroid.

MacroDroid can be found on Google Play, it only works on Android phones. Unfortunately, there is no version of this app for iOS.

  • Open the application.
  • Create a new macro (red square with “plus”. “Add macro”).
  • For a trigger, select the media button: “Data input” “Media button” “Long press”. Check “Long press”, because if you select “Double press”, switching tracks will not work.
  • Open the “Actions” menu, then “Media” “Media control” “Emulate the media button” “Next”. Here you select your application from which you listen to music (Yandex Music, Google Play Music, VLC, YouTube, etc.).
  • Then goes to the section “Restrictions”. “Communication” Bluetooth status “Device connected”. Choose “Redmi AirDots_R”.
  • Save the macro.

That’s all. Button setup is complete, headphones can be used.

How to turn off Redmi AirDots

The Redmi AirDots earbuds are Xiaomi’s budget bluetooth headset option. The device is known for its good profitability, the model can be considered a more profitable analogue compared to Airpods from Apple and Galaxy Buds from Samsung. Despite the clear advantage, the user may face difficulties when connecting airdots to a mobile device and disconnecting.

How to disconnect headphones from a smartphone

To disconnect the accessory from the phone and reset the Redmi AirDots, it is important to follow the instructions.

Press and hold the touch zone on the external sensor for a few seconds until the red indicator light flashes.

If the user takes off the earbuds while using them, music playback will not be interrupted, unlike Airpods. Redmi AirDots earbuds are disconnected from the phone only when the Dots are in the case and automatically connect to the device if they were taken out of the case.

If only one L (left) earbud is removed, it will automatically turn off, and the R (right) will continue to play music, when you remove the R earbud, both are turned off.

Individual sync of Mi AirDots

Many owners of the Xiaomi AirDots wireless accessory faced with incorrect connection and the problem that one of the headphones suddenly disconnected. The reason for this is that the functions of the left earbud are not basic, but only complementary to the right one, which is considered to be the leading one.

You can fix the problem by completely disconnecting the headphones and resetting the Bluetooth settings on the device. To do this, carry out simple manipulations:

  • Deactivate the pairing of both Xiaomi Redmi AirDots earbuds (press the touch area on the sensor and hold it until the red blinking LED appears).
  • Press the touch zone again for 40-50 seconds, waiting for the headset to be configured (white LED blinks), and continuing to hold the press until the red LED blinks (10-20 sec.).
  • Insert both earbuds into the case.
  • Take the headset out of the case, wait until the left earbud finds the right one, completing the synchronization, and then reconnect the pairing with the device.
  • If, after the reset procedure, the mobile device begins to see the earbuds separately, you will need to connect only the right one to the device, and after it starts playing sounds, you need to activate the left one. it must reconnect to the right.
factory, reset, redmi, airdots, headphones

In the event that resetting the settings did not help the first time and the headphones do not turn off in the case, you need to repeat the procedure. Also, it will not be superfluous to clear the memory of the bluetooth application on the mobile device.

How to set up Xiaomi AirDots headphones.

Technology from Xiaomi is one of the highest quality on the world market, and a number of universal functions are offered for a low cost. High quality, simplified algorithms for configuring additional wireless gadgets. One of these gadgets is AirDots, which are a common person with little understanding of Android technology. Will not be able to connect without instructions.

AirDots setup method

AirDots are pretty easy to set up with the instructions. Therefore, I propose not to hesitate and go straight to her.

  • First, take the AirDots out of the case.
  • On any earpiece there is a touch button, by holding it down for a few seconds the device will perform a certain function. It is necessary to simultaneously hold down the buttons on two headphones.
  • Keep holding the buttons.
  • You should observe the following: on the right “ear” white light will light up, then. red. After that, a red and white flashing of colors will appear. As soon as this starts, put each earphone back in the case.
  • Making sure that the charge indicators are in working order.
  • Open the shutter with notifications by swiping down. On the left, on the second row, you will see a button with an icon and the inscription “Bluetooth”. Click on it.
  • Open the case and take out the left earpiece first, and then the right earpiece. Otherwise, everything will be violated, so take it responsibly.
  • After what has been done, white color will be on on each earphone. this means that everything is going according to plan.
  • We go to the phone settings by clicking on the application in the form of a gear. We see a list of devices. There will be at least two of them. “Redmi AirDots_R” and “Redmi AirDots_L”. These are the right and left earpieces respectively. We connect only the right.
  • After the performed actions, the device “Redmi AirDots_R” will move to the section “My devices”.
  • Go to “Bluetooth”, wait for the search for headphones. We connect “Redmi AirDots_R”.
  • The headphone light will flash intensively. this is the process of finding a pair. We are waiting for 15 seconds.

Service repair smartphone Xiaomi Mi A3, with good service, diagnostics 0 rub.

Insert headphones into your ears, turn on any sound in your headphones by playing a music track or video. At the very beginning of sound playback, you need to click on the power button on the left earphone. After which it will automatically connect to the right.

Navigation menu

How to set up Xiaomi AirDots headphones, for normal operation, you need to set the appropriate parameters.

What users say about setting up AirDots:

For an hour I can not connect AirDots to my Xiaomi, it turns them off and that’s it.

I do not understand anything, the left earphone does not turn on on AirDots.

When connecting to Hiaomi, AirDots crashes an error, failed to connect error pin or key password.

Both Xiaomi AirDots headphones connect, but only one of the headphones works.

Headphone charge

AirDots charge keeps its work for 4 hours. The earbuds charge very quickly. in just 40 minutes. When discharged, the red light will be on. White, on the other hand, will indicate a full charge.

How to reset AirDots to factory settings

To arrange a conditional Hard Reset for the headset:

  • Press and hold the buttons on the headphones to turn them off. Hold your fingers until the indicator light turns red.
  • Now press the keys again for 30-50 seconds until the indicators turn white, then wait for the indicators to flash white and red after another 5-20 seconds. Completion of the operation will be indicated by several flashes.
  • Place the headphones back in the case.
  • After a few minutes, you can sync the headset with your smartphone or computer.

Rollback to factory settings is used to restart the search for a connection between the right (main) and left earphones. Failure is caused by “frequency pollution” from Wi-Fi lines, mobile networks and other things.

If you use Pro version headphones, then for a complete rollback you will need:

  • Replenish the case battery to 100% or put it on a 30 minute charge.
  • Insert the earbuds into the case. An important point. do not close the case during the reset.
  • There is a key on the back of the case. Hold and hold it for 30 seconds.
  • This will roll back the settings to factory defaults. Synchronization between headphones will happen automatically, without user intervention.

How to factory reset Redmi AirDots headphones

A wireless headset from Xiaomi is prone to headphone out-of-sync when only the right one continues to play music, or both earbuds stop working. This is a technical flaw that can be easily fixed by rolling back the AirDots to factory settings.

How to sync AirDots correctly

In order not to frequently reset Redmi AirDots, they must be properly connected for the first time or reconnected to a new device:

  • Make sure the earbuds are charged or wait until the case is replenished to 100%.
  • Take out the right earbud and leave the left in the charging socket.
  • Once removed from the power connectors, the earbud will automatically turn on. Disconnect it manually by holding the key until the red indicator turns on.
  • On completely disconnected, press the key again for 30-50 seconds until the notification indicator flashes red.
  • When the operation with the first is done, take out the second headset and carry out similar manipulations with it.
  • Insert the earbuds back into the case and wait for complete synchronization. it takes 5-10 seconds.

The above steps also allow you to reset the settings, but this is more time-consuming.

Important! The instructions above will work for the Redmi-branded Redmi-branded AirDots variations from Xiaomi as part of the Mi line.

It is recommended to do a full reset to the factory settings of AirDots in case of headphone out of sync, audio signal failures and prolonged music lag. Correct synchronization eliminates subsequent problems and allows you to enjoy sound.

How to pair headphones with each other Redmi AirDots?

How to connect Bluetooth headphones to your phone

  • Press and hold both earbuds until you see a double purple-red blinking. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other.
  • Go to the Bluetooth settings of your smartphone.

How to pair headphones?

Activate pairing mode on the Bluetooth headphones. Press and hold the power button or ID SET button. When the indicator starts flashing quickly, release the button. Bluetooth headphones enter pairing mode.

How to pair the i11 headphones?

  • Press and hold the buttons on both earbuds at the same time until the indicator flashes alternately blue and red.
  • Double click on the button of the main headset (in these models usually the right one).
  • Turn on Bluetooth device search on your phone.

How to reset i11 Tws settings?

Place both Airpods in the charging case. Close the lid, wait 30 seconds, and then open the lid. Press and hold the setting button for a few seconds until the status light flashes white.

How to reset Tws headphones?

  • Take out both earbuds.
  • Hold the buttons on both earbuds and hold until both of them start blinking.
  • Wait until one of the headphones stops blinking.
  • Turn on Bluetooth on your phone and select “TWS-i7”.

How to pair Airpods with each other?

On your iPhone, go to the Home screen. Open the case that contains your Airpods and place it next to your iPhone. The iPhone displays a setup animation. Click “Connect” and select “Finish”.

How to connect a device to a phone

The feature of these headphones is the presence of a touch panel on the outside of each of them, with which they connect to a mobile device.

Redmi Earbuds. How to Reset

Review Xiaomi Redmi AirDots. Review of Bluetooth (TWS) Headphones and Connection Instructions

Xiaomi Air Dots are stylish and compact wireless headphones. Good sound quality and affordable price, which is much lower in comparison with competitors, have made this product hugely popular. The most compact, lightweight and functional, these headphones will allow you to enjoy your favorite music every day.

How to sync headphones

Some users complain that AirDots do not sync, that is, the left earphone “does not see” the right one. To cope with this problem, you need to reset the Bluetooth settings on the device. To do this, follow a few simple steps:

  • Unplug the headphones. This can be done by holding down the touchpads on the devices. Keep until the indicator lights up red.
  • Then we clamp the headphones themselves for 30-50 seconds. Initially, the indicator will turn white. After about 10-20 seconds, a red-white color will appear and the indicators will flash twice.
  • It should be kept until the moment when they flicker several times, go out for a couple of seconds and flicker again. The settings are now completely reset.
  • It remains to put the headphones in the case and take them out together after a while. The left one will start searching for the right one, find it and sync. Now you can connect your “ears” to your smartphone.

How to Switch Music on AirDots

There is no music player control on AirDots headphones, but there is a life hack that will allow you to do this. It is necessary to call the voice assistant by double-clicking, and ask him to switch the track or change the volume.

factory, reset, redmi, airdots, headphones

All about charging Redmi AirDots

To charge the earbuds, you need to place them in a plastic case. Each of the earbuds has its own socket. It will not work to insert the headphones into the case by swapping the right and left positions. As soon as the “ears” are in place, the red indicators will light up. When charging is complete, the LEDs will change color to white.

It will take 1.5-2 hours to fully charge the dots in the case. It may be that on the left earpiece the indicator is white, but on the right it is still red. This is a normal situation, because the right “dots” in a pair is the main one, it discharges faster and needs more time to charge.

The case, since it is a charger, has a built-in battery, and it also needs to be charged. For this, the case has a mini-USB port, into which the corresponding cable is inserted. This cable is not included in the package, so you will have to purchase it separately.

The case also has a status indicator. When charging is required, it turns red, after fully charged (this process takes 2 hours), the color changes to white and the indicator turns off quickly.

Sometimes one or both earbuds cannot be charged. The reason may be trivial. the case battery is discharged. In this case, after being placed in the case, the headphones are not disconnected from the phone, pairing remains even if the case cover is closed. The second reason is the lack of contact between the earphone and the charging pad in the case. Check if you have removed the film from the dots, and also find out why the earphone does not sit completely in its socket. Perhaps the ear cushion or something else is interfering with this. Remove the ear pads and try inserting the headphones into the case without them. The charging problem can be resolved immediately. Then you will have to find new, more suitable silicone tips.

Brief instruction

The instruction in Russian will help you to understand all the intricacies of setting up and operating AirDots headphones. And we will provide answers to the most frequently asked questions.

We connect both AirDots headphones to a phone or computer

We will immediately determine if the headphones have already been used on another device, or you have already tried to connect them to an external device, then you need to first untie the AirDots from the device. If you disconnected the headphones, or connect them for the first time, then go ahead. First of all, they are necessary:

  • We take out both headphones from the case at the same time
  • If the headphones are on, then we hold down the buttons on both headphones for 6-10 seconds until the red indicator lights up. This would mean turning them off.
  • Again, simultaneously hold down the buttons on both headphones for 2-3 seconds until the indicator on both headphones quickly blinks white.
  • You need to wait a few more seconds for the headphones to sync with each other. In this case, the right earphone (main) will emit a sound signal. At the same time, the indicator on the left earpiece will go out, on the right one it will blink white, but already slowly.
  • Now on your external device to which you want to connect headphones (smartphone, PC or tablet), open the Bluetooth settings. In the list of available devices you will see Redmi AirDots_R or Xiaomi_mi_AirDots_R click on it. In this case, the headphones should not be in the case.!
  • After successful connection, all indicators on the headphones will turn off.
  • If you failed to connect them the first time, do not be discouraged, we advise you to do the whole procedure again, having previously untied the headphones from the devices with which you tried to synchronize.

What is the difference between reset on Mi AirDots and AirDots Pro

Redmi and Mi Airdots are small budget models that have one button each. The included case only charges the gadget. The design of the Pro versions is different: they are made in the form of a tube, and a docking station is needed to connect to the phone.

If you want to reset cheap headphones, hold the keys for a few seconds, if the Pro is a model, place it in the case and press its button. In terms of convenience, ordinary Airdots win, since no case is required to interact with them.

Reset AirDots Pro

TWS headsets, like any other device, can malfunction due to software and hardware issues. The fastest solution is to factory reset. Our manual will help owners of Xiaomi AirDots Pro and Pro 2 who have encountered problems with the functioning of their headphones.

Why reset parameters

Hard Reset is used in phones, fitness bracelets, headphones and other smart devices. This is a hard reset, in which the device returns to the factory state and all user information is deleted. You need to do a hard reset of the headset if:

    only one insert plays; at first two headphones work, but out of sync often occurs; unable to sync with smartphone or PC; there are noticeable lags of audio from video, not related to the Bluetooth version; different volume in the ear pads.

How to hard reset on Airdots Pro

If Hard Reset does not solve the problem, contact the service center for specialized assistance.

We found out how to reset Xiaomi Airdots Pro to factory settings, why you might need this procedure and how to properly implement it. If you have any additional questions, write in the Комментарии и мнения владельцев, and also read our other articles about Xiaomi and Redmi wireless headsets.

Factory reset Xiaomi AirDots headphones

Wireless Bluetooth headphones “Redmi Airdots” are prone to desynchronization: only one earbud is playing, there is a different volume level in the plugs. To get rid of the malfunction, you will need to reset the Xiaomi AirDots headphones to factory state.

How to reset AirDots headphones

  • press the mechanical buttons on the droplets. Release your fingers after both notification lights turn red;
  • release the keys and press them again for 25–45 seconds. First, the headset will blink white, and after 5-25 seconds it will blink white, then red. Continue to hold your fingers until 2-3 more blinks happen;
  • this completes the factory reset. Place the “ears” on the contact pads in the case;
  • after 2-3 minutes they can be connected to devices.

Note! This instruction is suitable to reset the settings of Xiaomi AirDots. an analogue of the model from Redmi, they were released earlier, instead of mechanical control keys, touch pads were used.

To reset the “Xiaomi” Mi AirDots Pro to factory settings:

  • pre-charge the case by connecting it to a power source for 20-30 minutes;
  • insert the plugs into the case. Leave the top cover open;
  • on the case, press down a single key for 30 seconds, which will help to reboot the headset from “Xiaomi”.

How to sync AirDots headphones

To avoid the need for a quick reboot after a rollback, do the following:

Xiaomi Redmi Airdots Hard Reset and pairing

  • charge the plugs to 70-100%;
  • take the right earphone out of the case;
  • turn it off by pressing the control key until the colored indicator turns red;
  • after disconnecting the plug, press the button again for 25–45 seconds. Do not release until the device flashes red;
  • put the first “ear” aside and repeat the same process with the second;
  • return both plugs to the case. After 5-10 seconds they will be synchronized and ready to create a connection with another device.

This operation can be done instead of rolling back to factory settings.

To restart Xiaomi or Redmi AirDots, you need to spend 5-10 minutes, after which the headphones will be ready to pair with another device. If the pairing constantly “falls off”, it is recommended to visit the service center to diagnose the headset, charging case or smartphone.