How to Factory Reset iPhone 10

Iphone

Restoring data from a backup

After the device update has completed, you will have a completely blank iPhone in your hands. To return personal information, it is necessary to restore all data previously saved to a copy. The way how to restore iPhone after reset depends on which method of copying information you have previously selected.

Algorithm of actions to restore the backup version to iCloud.

  • Open “Settings”.
  • Select “Recover via iCloud Copy”.
  • Enter your personal username and password from your AppleID.
    factory, reset, iphone
  • Wait for the operation to complete.

Important: the download process is lengthy and can take up to 1 hour. Charge the device in advance to prevent emergency interruption of recovery.

If copying was carried out using aytyuns:

  • Connect using the iPhone cable to the device with the latest version of iTunes downloaded.
  • Enter the program, if necessary, enter the code for synchronization.
  • Select the gadget in the sidebar of the application.
  • In the “Overview” section, indicate that you need to “Recover from a copy”.
  • From the options offered by the service, select the current copy and confirm the action by clicking on “Restore”.
  • Do not disconnect iPhone from the PC as soon as the device restarts: for the recovery to go smoothly, you should wait until the re-sync is complete.

In the event that sync with iCloud is not activated on the smartphone and data has not been copied (the iPhone was broken, did not turn on, you forgot about the copy), you can restore the data using one of the special utilities:

  • iSkysoft iPhoneDataRecovery;
  • Disk Drill;
  • Gihosoft Free iPhoneDataRecovery;
  • PhoneRescue etc.

Using third-party programs

When deciding how to reset your iPhone or iPad to factory settings, you can resort to the help of special applications. Such programs will solve the problem if the device is not restored in the usual way. Installation requires a computer or laptop.

In recovery mode or DFU via iTunes

If the smartphone does not work, its settings can also be rolled back through the proprietary iTunes application installed on the computer. Only USB cable required.

  • Connect iPhone to computer and open iTunes app.
  • Use a combination of buttons to force restart:. for iPhone 8, 10, 11, X, XS, XR, SE: first quickly press and release the volume up key, then repeat the action for the volume down key, then hold down the power button (until the message about the activated recovery mode on the screen);. for iPhone 7 and 7: simultaneously hold the power button and volume down;. for iPhone 4, 4s, 5, 5s, 6, 6s. simultaneously hold down and hold the Home and Shutdown buttons (until the transition to the “Restore iPhone” mode as in the photo).
  • A pop-up window will appear in iTunes on PC, select “Restore”.

If iTunes is not installed on your PC, then you can download it from the official website. Use your Apple ID set up when you or the restaurant bought the device.

In the main settings of the phone

This method is suitable if the iPhone or iPad is turned on and functioning.

  • Go to “Settings” and go down to the “General” tab.
  • Select the “Reset” section.
  • From the proposed rollback options, select the “Erase content and settings” method. Confirm your decision. After completing the reset (1-2 minutes), the smartphone will reboot.

Performing an iTunes reset normally

Restoring iPhone via iTunes will allow you to return the device to the basic settings, as well as re-flash the iPhone with the current version using a regular USB cable and a computer or laptop. The method is suitable if the phone turns on, the screen works.

Algorithm of actions, how to restore iPad or iPhone via iTunes:

  • Connect your smartphone to PC with a cable
  • Open Finder or iTunes on your PC
  • Select your device in the sidebar.
  • Enter iPhone Settings Mode via iTunes and select the “Overview” tab.
  • Indicate “Restore device”, confirm your consent to update in the pop-up window.

After the end of the operation, the smartphone will automatically install the current firmware, so this method will work if you decide how to roll back the iPhone to the official version and not reflash it in the showroom.

Making a backup

Since after a factory reset, user information will not be restored, you need to set up a backup version of data on the iPhone: this way you can save information and personal settings of the device.

iPhone Eraser

IPhone Eraser app allows you to quickly format your iPhone and reset it to factory version without the ability to recover deleted data. The program supports all iPhone models and is not demanding on the computer OS.

  • Connect iPhone and PC with cord and launch Eraser.
  • To start the process, click Full Data Erase.
  • Confirm the reset of the gadget by pressing Erase again.
  • Do not close the window or disconnect the device until the process is complete (the utility shows the progress and informs about the end of the reset).

Via iCloud cloud

For data recovery, you can back up your phone through iCloud options. This operation is recommended to be carried out via Wi-Fi.

  • Through Settings, log into your iCloud profile.
  • In the cloud options, select backup.
  • Click “Create” and do not disconnect the Internet until the end of the process.

Press the return button and check the success of the operation: under the backup option, the date and time of the last copy is displayed.

ReiBootPro utility

Using ReiBootPro, you can reset your iPhone in a few clicks. The application will help both in case of device freezing and screen breakage.

  • Connect the cable from the device to the PC, download the utility.
  • Select “Enter Recovery Mode”.
  • Indicate “Fix Now”.

The paid version has more extensive functionality and allows you to automatically format the system, restore gadget backups bypassing iTunes, etc.

How to reset iPhone settings on the device itself

Here’s a very easy way to reset your device. Tenorshare ReiBoot. This tool provides you with a pretty easy way to factory reset iPhone without using iTunes, even if iPhone / iPad is disconnected, connect to iTunes. iPhone keeps restarting, iPhone won’t turn on, iPhone stuck on apple, it can solve these problems too. Download and install the program on your Windows or Mac and then follow the instructions below to erase everything.

Download the program and connect your iPhone to PC, select Fix Operating System.

Select “Recovery Deep” to download the firmware package.

Specify the path to download the required firmware package from the local computer folder or, if you do not have the firmware package, click “Download”.

Select the Start Recovery option and wait for the process to complete. After that, your iPhone will be restored to factory settings.

How to reset iPhone settings on the device itself

The simplest solution to reset iPhone settings is to follow the diagram below, with which you can reset the phone in the settings of the phone itself, without resorting to any programs. To do this, you definitely need to remember your device password and Apple ID password. To reset iPhone settings on the device itself, follow the instructions below.

Go to the device in the Settings General Reset.

Select the function “Erase content and settings”.

When prompted, enter your device password as well as your Apple ID password.

Confirm erasing data from the device by clicking on “Erase iPhone” and wait for the process to complete.

How to Factory Reset iPhone without Password and iTunes

How to Factory Reset iPhone Using iTunes

In addition, you can reset iPhone settings through your computer. This will require iTunes, a well-known program for Apple users, which is commonly used to exchange various types of files between Apple devices and PCs. To reset iPhone using iTunes, follow the steps below.

Connect your iPhone to your PC with a USB cable and run iTunes on your PC.

Select your device in the window that opens by clicking on its icon at the top of the screen.

In the left pane of the window, select the “Overview” tab and click on the “Restore iPhone” button located on the right side of the screen. At this stage, a warning about the need to disable Find My iPhone may appear.

After disabling this feature on your phone (to do this, go to iCloud Find iPhone Settings), you will be asked to confirm the start of the process. Click on the “Restore” button again. After that, all personal data will be erased, and the latest version of the system is installed on the iPhone.

Open the iCloud.com cloud storage page in a web browser and enter your Apple ID password. In the “Find iPhone” section, delete this device so that it is no longer linked to your Apple account.

At the end of the day, there are various reasons why you need to reset your iPhone to factory settings. At the same time, you can remember the password that allows you to unlock the device to perform various operations and gives the owner access to the settings, or, forgetting it, enter the wrong one and stay with the phone disconnected for a long time. There are various ways to perform a full reset of the iPhone, but the most optimal solution in all these cases. including the absence of a password from the device. would be to use the ReiBoot program. In addition to this function, the utility can also help with a number of other problems, for example, when the system freezes, black screen of death, etc.

Preparing iPhone for Sale

First of all, the iPhone seller needs to make sure that the personal data stored on the device does not disappear. Personal data may include not only “content trash”, but also very important files. contacts, notes, photographs, reminiscent of a trip to the warm South. All this should be packed into a backup copy. backup.

There are several ways to back up your iPhone:

  • Via iTunes. This is the method that Apple recommends. A backup created through iTunes contains a lot of data. from photos to Safari bookmarks. Music, videos and applications are not included in this copy. It will be possible to find a backup on a PC by following the path Users / AppData / Roaming / Apple Computer / MobileSync / Backup /.
  • With the help of third-party software. The best known alternative file manager is iTools. There is another, no less worthy one. iMazing. The advantage of both managers over iTunes is that they are able to create copies that include music, programs and videos. However, such copies, as a rule, are distinguished by an impressive weight.
  • ICloud. iCloud is Apple’s cloud storage. Each of the users of “apple” technology has 5 GB of free space in the “cloud”. It is recommended to use a backup copy of this space. Copiers

The following services should be deactivated:

iMessage. If you do not disable the built-in messenger, problems with SMS delivery may arise in the future. To deactivate the service, the user needs to follow the path “Settings”. “Messages” and switch the corresponding slider to the “OFF” position. Face Time. The iPhone owner needs to find the “Face Time” section in the “Settings” section, go into it and deactivate the toggle switch of the same name.

Sign out of iCloud, iTunes Store, and App Store:

If you are using iOS 10.3 or later, go to the Settings menu of [your name]. Scroll down and click Sign Out. Enter your Apple ID password and click Turn Off. If you’re using iOS 10.2 or earlier, go to iCloud’s Settings Sign Out. Click the Sign Out button again, click Remove, and enter your Apple ID password. Go to Settings iTunes & App Store Apple ID Sign Out.

Factory reset

  • Go to the “Settings” section on your phone.
  • Find the “Basic” tab, scroll to the bottom.
  • Click on the “Reset” tab once and select “All Settings”.
  • Confirm your action.

The reset takes about a minute or two. After completing the procedure, you can use your smartphone, your data, music, games, applications will not be deleted. Your Safari bookmarks will not be touched. This procedure can speed up your phone.

Reset iPad via iTunes

Also, you can reset iPad to factory settings using iTunes. In this case, first you need to turn off Find iPad. To do this, go to iPad Settings, open the “iCloud” section and disable the “Find iPad” function there. It should be noted that to disable this feature, you will have to enter your Apple ID password. Without this, you will not be able to turn off iPad search and perform a factory reset via iTunes.

After turning off Find iPad, you can start resetting your iPad to factory settings. To do this, launch iTunes on your computer and connect your iPad to your computer using a cable. After connecting iPad, click on the device icon that appears in the upper left corner of the iTunes window.

Then you need to go to the “Overview” tab.

And click on the “Restore iPad” button there. It should be noted that there is also a “Restore from copy” button next to it. This button is responsible for restoring iPad from a previously created backup and has nothing to do with a factory reset. Therefore, do not confuse the buttons “Restore iPad” and “Restore from a copy”.

After clicking on the “Restore iPad” button, a small window will open asking you to confirm the iPad reset to factory settings. In this window, you need to click on the “Restore” button again and then the iTunes program will begin the process of resetting the settings on your iPad.

How to factory reset iPad

The need to reset iPad to factory settings can arise in various situations. For example, a reset may be necessary in the event of software glitches or when the device is sold. In this article, we will look at three ways at once on how to reset iPad to factory settings.

But, first, a few words about safety. Before you reset your iPad, you need to check the battery charge level. It is necessary that it be charged at least 30 percent, and preferably everything at 100. Since turning off the device during a factory reset can lead to breakdown. Also, before resetting, it is advisable to make a backup using iTunes. This will allow you to restore everything in the event that you change your mind. And if you have an iPad with a jailbreak, then it is better to refuse to reset the settings altogether, as this can lead to problems with loading.

Reset iPad via Settings

If you want to reset iPad to factory settings, the easiest way is to use the corresponding function in Settings. To do this, you need to go to iPad Settings and go to the “General” section there.

Then you need to scroll to the bottom of the list and open the “Reset” subsection.

This will take you to the section with settings related to factory reset on iPad. The following functions are available here: Reset All Settings, Erase Content and Settings, Erase Network Settings, Reset Home Button Settings, Reset Keyboard Dictionary, Reset Geolocation Settings. If you want to reset iPad to factory settings, then “Reset all settings” or “Erase content and settings” will suit you. Select one of these functions and follow the instructions that appear on the screen.

  • Erase All Settings deletes iPad settings. All settings are returned to factory defaults, while your data remains intact. This function is suitable if you have any problems with the settings. For example, something freezes or does not work as it should.
  • Erase Content & Settings is a complete factory reset of iPad. When using this function, all settings will be reset to factory defaults, and the user-generated content that was on the iPad will be deleted. This reset option is suitable if you plan to sell your iPad or just give it to another person for use.

Reset iPad via iTunes without password

If you have forgotten your Apple ID password, the instructions above will not work as you simply cannot turn off Find iPad. If you find yourself in such a situation, then you can try resetting iPad to factory settings using Recovery Mode.

Entering Recovery Mode is easy enough. To do this, you need to do the following:

  • Turn off the iPad and wait a few minutes for all programs to finish their work and the iPad turns off completely;
  • Press the “Home” button and without releasing it, connect the iPad to the computer using a cable;
  • You need to hold the Home button until the iTunes icon and cable appear on the iPad screen;
  • After that, the “Home” button can be released, you have successfully entered the Recovery Mode.

After enabling Recovery Mode, you need to launch iTunes on your computer and click on the “Restore iPad” button. This way you can reset iPad to factory settings without Apple ID password.

If you need to exit Recovery Mode without using recovery, just press and hold the iPad’s power button until it starts to boot.

iPhone X How to Reset Back to Factory Settings

Via iTunes (device turns on)

If your iPhone isn’t severely damaged and can turn on, and you have a USB cable and a computer or laptop with iTunes installed, do the following:

  • Launch iTunes on your computer.
  • Under Settings [your name] iCloud, turn off Find My iPhone.
  • Connect iPhone to computer with USB cable. If iTunes requires you to enter a password or make this computer trusted, follow the instructions of the program.
  • When the device is displayed in the program, select it in the panel on the left.
  • On the Overview tab, click the Restore iPhone button.
  • In the pop-up window, click “Restore” again to confirm.

After that, the device will be cleared of your data and returned to factory settings, and the current version of iOS will be installed.

Using third-party software

You can use specialized programs to reset iPhone. They are done literally by pressing a few buttons. One of such programs. Tenorshare ReiBoot. It not only resets the settings, but updates the entire firmware. this is important if the smartphone has any “glitches”. Before starting work, you need to install ReiBoot on your computer, and then connect the iPhone to the PC with a cable (preferably the original Apple Lightning. Then everything is quite simple.

Run the program and find the item “Reset device”.

iPhone X,Xs,11. How to Hard Reset, Factory Reset (Forgot Password)

Select the Factory Reset option. The developers of the program advise to make a backup copy of the device in advance, but this is not necessary.

The program will download the firmware for your device and offer to install it. The process will take a few minutes, since the amount of data is quite large (5 GB).

How to Factory Reset iPhone: 3 Ways for Different Occasions

Keep a quick cheat sheet on how to factory reset iPhone. with and without iTunes.

For a number of reasons, you may need to reset your iPhone to factory settings. In Apple’s terminology, this is called “restoring iPhone”, that is, returning the original settings and setting up the smartphone as new. Read below for three ways to do this.

Via iTunes (device does not turn on)

If the iPhone is no longer able to start on its own, you will again need a computer with iTunes and a USB cable. To reset the settings, follow the instructions:

  • Connect iPhone to computer and open iTunes.
  • Under Settings [your name] iCloud, turn off Find My iPhone.
  • On the connected device, make a forced restart:
  • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the power button until the recovery mode screen appears.
  • On iPhone 7 or iPhone 7 Plus: Press the power button and the volume down button at the same time. Hold them until the recovery mode screen appears.
  • IPhone 6s and earlier: Press the Home and Power buttons at the same time. Hold them until the recovery mode screen appears. In all three cases, it looks like this:
  • A pop-up window appears in iTunes asking you to restore or update your device. Click “Restore”.

    • In this case, the iPhone settings will also be reset to factory settings, and the current version of the operating system will be “uploaded” to the device.

    Without iTunes (device turns on)

    You can also do a factory reset on the iPhone itself if you don’t have a computer. But this can be done only if the device turns on.

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset“.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    After that, wait for the settings to be erased. The device will be returned to factory condition.

    If your iPhone turns on, we recommend that you back up your data to Apple cloud or external storage before resetting.

    How to recover data on phone after factory reset?

    Recover data with EaseUS MobiSaver

    • Connect your Android device to your computer
    • Scan Android device for lost data.
    • Recover Lost Data from Your Android Device.

    How to factory reset iPhone 10 with buttons?

    • Press and release the volume up button.
    • Press and release the volume down button.
    • Press and hold the side button until the Apple logo appears.
    • So to implement a Hard Reset, you need to hold down the volume down and Power buttons until the Apple logo appears.

    How to Factory Reset iPhone 11?

    How to factory reset iPhone or iPad

    • Back up important data If you want to keep your personal information, back up your iPhone or iPad locally to your computer using iTunes and / or a cloud copy to iCloud.
    • Perform a reset Go to “Settings” → “General” → “Reset” and click “Erase content and settings”.

    How to Factory Reset iPhone without Passcode?

    While holding the volume down button, connect your iPhone to your computer. Hold the volume down button until the recovery mode screen appears. If you have a backup of iPhone data, after removing the password, restore data and settings.

    What is deleted when you reset all settings?

    Resetting the settings to factory settings is necessary for the user if, for example, he wants to get the device in its original form, since when the settings are reset, absolutely all data is deleted, including photos, videos, applications and other files, and the system returns to its original state, including all …

    How to Factory Reset iPhone 7?

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    How to Hard Reset iPhone 11?

    If the gadget does not respond or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.

    What is deleted during a factory reset?

    Yes, resetting to factory settings will delete all data from the device: contacts, messages, downloaded applications, photos, music, mail settings, etc. After the reset, the smartphone or tablet will return to the form it had when it was purchased, that is, to the factory state.

    How to keep data when resetting to factory settings?

    How to back up your data before factory reset

    • Go to Settings, then Google Accounts.
    • Activate the toggles next to data that you want to store on Google servers, such as contacts, apps, documents, and more.
    • Wait for the sync process to complete.

    How to make an iPhone look like new?

    Erasing Data from an iPhone, iPad, or iPod touch

    • Go to the menu “Settings” “General” “Reset” Then click “Erase content and settings”.
    • Enter your device password or Apple ID password when prompted. Then confirm that you want to erase the data from the device.
    • Wait for the data to be erased

    How to clean up iPhone trash?

    How to get rid of junk and free up space on iPhone

    • Perform a forced reboot
    • Delete the cache in the settings
    • Delete the cache in the applications themselves
    • Reinstall space-eating apps
    • Start all over again
    • Use apps to clean up space
    • Take advantage of iOS capabilities.

    What happens when you reset all settings on iPhone?

    Reset all settings. All settings (including network settings, keyboard dictionary, Home screen design, location and privacy settings, Apple Pay cards) will be deleted or reset to their default settings. Data and media files are not deleted.

    How to reset iPhone to factory settings if you forgot your password?

    While holding the volume down button, connect your iPhone to your computer. Hold the volume down button until the recovery mode screen appears. If you have a backup of iPhone data, after removing the password, restore data and settings.

    How can you unlock your iPhone if you don’t know the password?

    Recovery Mode to Unlock iPhone if Forgot Password

    • Turn off your phone.
    • Connect it to your computer.
    • Select Recovery Mode from the menu that appears.
    • Turn on iTunes, click OK and then “Restore iPhone”.
    • If a message appears about auto-checking for updates, click on the “check” button.

    How to factory reset iPhone 10 with buttons?

    • Just like when restarting, shortly press the “Volume” button
    • Then shortly “Volume.”
    • And then hold down the “Power on” button
    • Hold the Power button until the cable logo appears on the screen (after the Apple logo, about 20 seconds)

    What happens when you reset to factory settings?

    Yes, resetting to factory settings will delete all data from the device: contacts, messages, downloaded applications, photos, music, mail settings, etc. After the reset, the smartphone or tablet will return to the form it had when it was purchased, that is, to the factory state.