How to Enable Wi-Fi On Your Phone

Android devices are rapidly gaining in popularity. Nowadays, almost everyone has a smartphone or tablet on Android. However, despite such popularity and distribution, many users do not know how to configure WiFi on Android.

Of course, connection to such networks occurs automatically, and in the vast majority of cases, nothing needs to be configured. However, although rare, but still there are situations when connecting to a router requires the manual introduction of certain connection parameters.

How to connect WiFi on Android:. How to enter WiFi settings on Android

Before proceeding to change the connection configuration, you should understand how to install Wi-Fi on Android. To do this, you just need to turn on the adapter. There are two ways to do this:

  • In the dropdown menu in the toolbar.
  • In the device settings.

After that, the system will automatically start searching for available connections and give you a list. Your task is to select the desired network by name and connect to it. If it is password protected, enter it and click “Connect.” This is the procedure for setting up WiFi connection on Android. Everything happens automatically. However, sometimes there are cases when it is necessary to enter manual network settings. For example, if the connection is hidden in the parameters of the router or the DHCP function is disabled.

How to set up WiFi on Android:. How to open manual WiFi settings on Android

So, how to manually configure Wi-Fi on an Android phone? To do this, you must first turn on the wireless module. However, the method above is not suitable for us. Therefore, you need to enter the menu and find the “Settings” shortcut, which looks like a gear.

Open it. Further actions may vary depending on the version of Android. On newer models, the very first item will be WiFi. Here you can activate it or enter its settings. Since we are interested in the latter, we enter the parameters.

On older versions of the OS, first go to Wireless Networks, and then select WiFi Setup. To activate the adapter, check the corresponding line.

After turning on the module, the system will search for available connections and offer you a list of found access points. If you want to connect to a hidden network, then go to the very end of the list and click the “Add network” button.

Read more:  Honor 7a how to clear history

First of all, we need to specify the name of the access point (or the name of the network). After that, you need to specify the type of security. At the same time, remember that it must match the one specified in the parameters of the router. After that, just save the settings. If the DHCP function is disabled on the router, then when adding a new connection, check the “Show advanced settings” line.

Here you can manually specify the proxy server, IP address and other data. In order to manually specify the IP address, DNS server and the main gateway in the “IP Settings” line, set the value to “Static”. Fill in the lines that appear in accordance with the parameters of the access point and save the changes. As you can see, manually configuring WiFi on devices on Android is a simple task. The main thing is that all the data matches the configuration of the router.

On some smartphones, to open the manual control in the WiFi settings, press the “Menu” button. In the window that appears, select the “Advanced” item. After that, manual configuration of the wireless connection will open.

Why Android doesn’t connect to Wi-Fi:

I have extensive experience in configuring and connecting access control systems (ACS) and time tracking systems. And also I’m setting up servers, computers, workstations.
I work as an engineer at the Techno-Discovery company.

We recommend reading:

  1. How to set up a Wi-Fi connection on an Android tablet
  2. How to set up a Wi-Fi hotspot on Android
  3. How to set up a Wi-Fi connection on Android
  4. How to properly configure a wireless Wi-Fi adapter

Share the material in social networks:

Nothing is working. I want to make me play on the network in Minecraft 0.16.0 on a televison and on a tablet.

How to connect Wi-Fi on iPhone

  1. We go to the home screen and go to the “Settings” menu.
  2. We search for the line “Wi-Fi” and turn on the option.
  3. Then, the search for available Wi-Fi will be automatically launched.
  4. Choose a name and connect.

This method is suitable for connecting to unprotected routers, for example, in public places.

If you connect to a protected Wi-Fi, the sequence will be slightly different:

  1. Open the “Settings” menu.
  2. We search for the line “Wi-Fi” and turn on the option.
  3. After the automatic Wi-Fi search, select the desired access point.
  4. Enter the password and click “Connect.”

If in this way you can’t connect the phone to Wi-Fi, then you are entering the wrong password. In order to find out the correct one, contact your Wi-Fi administrator.

There are also situations when you need to connect the phone to a hidden access point that is not displayed in the general list. To connect a smartphone, you need to know the exact name of Wi-Fi:

  1. Open the “Settings” menu.
  2. We search for the line “Wi-Fi” and turn on the option.
  3. Click “Other” and enter the exact name.
  4. Click “Security”.
  5. After that, select the type of protection, as shown in the illustration below.
  1. We return to the item “Another network” and enter the password.
  2. Click “Connect.”
Read more:  Headphones Marshal How To Connect

The most common problems when trying to connect your phone on iOS to Wi-Fi

It very often happens that they seem to have done the right thing and followed the instructions, but nevertheless it is not possible to connect the phone with the IOS operating system to Wi-Fi. Do not despair, and think that the saying “Technique in the hands of a monkey is a piece of iron” is about you. Most likely, this is not a technical failure.

If you can’t connect your phone to Wi-Fi, do the following:

  1. Check your router connection. Also make sure you are in range.
  2. Check that the Wifi option is enabled on your smartphone. Go to Settings, then to Wi-Fi. If there is a blue checkmark in front of the desired name, this means that the connection in the phone is completed and problems are observed in the router.
  3. If you want to connect the phone to Wi-Fi at home, then check if the cables are connected correctly and the router is configured correctly.
  4. Reboot your iOS phone and reconfigure it.
  5. Reboot the router and also reconfigure it.

If all else fails, try the following:

  1. If you are trying to connect a smartphone in a public place, contact the employee of the institution and ask him to set up Wi-Fi.
  2. Check the connection on other devices, for example, on a laptop, or ask the others if the Internet works for them. If there is also no connection on other devices, then there are problems with the Internet provider. Contact your Internet service provider.
  3. Try connecting to another location or to another Wi-Fi. If attempts are unsuccessful, call a service center to check your Iphone.
  4. Update the firmware version of the router and check that your smartphone is in the list of supported devices.

How to connect Android to Wi-Fi

Many people think that setting up an iPhone is really not an easy task. Few will argue with this statement. But as for Android, many believe that these are user-friendly smartphones that even a child can figure out. However, in fact, when you try to configure Wi-Fi, there may be some difficulties.

In general, the popularity of Android is growing every day. Probably, there is no longer a person who would not have in the arsenal of home appliances a smartphone or tablet with the Android operating system. Even the smallest children today actively use these gadgets instead of the usual toys, dolls, cars, etc. But at the same time, few people know how to properly configure Wi-Fi.

It is worth connecting a smartphone once and in the future the smartphone will independently connect to Wi-Fi. But it’s not uncommon to observe situations when you need to configure Android manually.

For a clear illustration, we will use the LG G4 smartphone with the version of the Android 5.1 operating system. However, the model does not matter, android smartphones are almost the same.

Read more:  How to Clear History on Honor 7a

Before you begin to configure Android, you need to install Wi-Fi by turning on the adapter. The adapter is turned on in two ways:

  1. Through the toolbar.
  2. Via device settings.

The first method is very convenient: drag your finger across the screen (from top to bottom) and see the toolbar, as in the figure:

How to Enable Wi-Fi On Your Phone

We are looking for a Wi-Fi button with the corresponding icon. We click on it and thus activate the Wi-Fi model.

After that, the system starts searching for available wireless networks and the following list appears on the screen:

We select the necessary and connect. If it is password protected, enter a combination of characters and click “Connect.” The whole process is automated and does not take much time.

Another question is if the connection is hidden in the router settings or the DHCP function is disabled. Then you need to configure Android manually.

How to configure Wi-Fi on Android manually if the connection to the router is hidden

As in the first method, first we need to enable the adapter. But the methods listed above are not suitable for this. Change the strategy: first go to the “Settings”. But then we are already acting, depending on the version of the phone. We find the item “Wi-Fi” and open its menu. Turn on the adapter. If you have an earlier model, then find the “Wireless Networks” item and select “Wi-Fi Settings”. We translate the adapter in the included position.

Next, go to the manual search for available connections: you will be offered a list of access points that were found automatically. If you are connecting to a hidden network, click “Add Wi-Fi”:

Enter the exact name of the hidden access point (SSID) and go to security, as in the illustration below:

After that we save changes.

How to set up Wi-Fi on Android manually if DHCP function is disabled

In order to add a new connection to the router with the DHCP function disabled, put a tick in the line “Connect advanced settings”. Then it will be possible to enter the IP address, proxy server and other information yourself. To enter the IP address and other data, select “Static” in “IP Settings”. Fill the appeared lines with data about the router and start “Save” or “Ok”.

As you can see, special professional knowledge and skills are not required, the process is simple and clear. If you follow the instructions presented and do everything correctly, you will be able to set up Android or Iphone in a matter of minutes. We hope this article has helped you.