How to enable silent mode on your iPhone
Silent mode on iPhone and Do Not Disturb mode. the differences. The difference between Do Not Disturb and silent mode on your iPhone.
There are two ways you can stop your iPhone from ringing in inappropriate situations. For example, you can turn on silent mode (with a switch on the side) or configure the software function ” “. Both methods mute, but there are significant differences between them that not everyone is aware of.
The easiest way to mute your iPhone is to use the switch above the volume buttons on the left side of the case. Surely many people already instinctively reach for the switch when they enter a movie theater, school, church, etc.д., without even realizing it.
The above method mutes ringtones, messages, notifications, and even games, but your iPhone will still vibrate when you receive an incoming call, and the screen will light up when you receive an SMS. You can turn off vibration by going to “Settings “. “Sounds ” and by moving the switch to the left opposite “Vibration in silent mode е”.
Even though vibration will be turned off, the screen will still light up with an incoming message.
Silent mode on iPhone
The easiest way to mute your iPhone is to use the switch above the volume buttons on the left side of the case. Surely many people already instinctively reach for the switch when entering a movie theater, school, church, etc.д., Without even realizing it.
Calls and sound notifications are turned on:
Rings and sound notifications are turned off:
The above method mutes ringtones, messages, notifications, and even games, but your iPhone will still vibrate when you receive an incoming call, and the screen will light up when you receive an SMS. You can turn off the vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch opposite “Vibration in silent mode” to the left.
Even though vibration will be disabled, the screen will still light up with an incoming message.
How to enable iPhone silent mode
Our experienced team of editors and researchers contributed to this article and checked it for accuracy and completeness.
The wikiHow content management team carefully monitors the work of the editors to ensure that each article meets our high quality standards.
Number of views on this article: 151 680.
To silence sounds, vibration, and light notification on your iPhone, activate silent mode or “do not disturb” mode. Silent mode changes the sound alert to vibration, while “Do Not Disturb” mode temporarily blocks all alerts (including vibration and light alerts). Customize your iPhone to get exactly what you want from it.
- Note: The alarm that you set in the Clock app will ignore the silent mode and ring at the designated time. Alarm clocks set in other apps may not ring.  X Source of information
- The “up” position means that the sound in the phone is on.
- If you go to silent mode and look at the phone screen, you will see a notice. “No sound”.
Mute Keyboard Pressing. If you can still hear the keyboard keys making noise, mute them by going to “Settings” “Sounds. Set the Keyboard Press switch from green (On) to white (Off).
Turn off “Lock Sound.”. While locking or unlocking, your phone will make sounds whether it’s in silent mode or not. To turn off this sound, go to “Settings” “Sounds”, and at the bottom of the menu, find “Lock Sound”. Set the switch from green (On) to white (Off) to mute all keystroke sounds.
There are many options on your iPhone related to calls, messages, notifications, etc.д. To configure them, go to Settings Sounds. This is what these options are responsible for:
- Ringtones are responsible for the volume of the incoming call and notification ringtone, as well as allowing or forbidding to change it with the volume buttons.
- Ringtone allows you to select the ringtone of an incoming call. Read more here.
- Message sound allows you to select the sound of an incoming message.
- Auto Answer lets you select the sound of an incoming voice message.
- NewMail allows you to choose a sound for incoming emails.
- Sent selects a sound when you send an email.
- Warnings is responsible for the sound to remind you of your events.
- Warnings does the same, but for Reminders.
- AirDrop allows you to choose the sound for receiving an AirDrop request.
- Keyboard clicks lets you choose whether or not to sound when keys are pressed.
- Sound Lock selects whether to enable sound when locking and unlocking the device or not.
Do not disturb mode
The second way is to activate Do Not Disturb mode. It lets you block everything from sounds and vibrations to light alerts. Distractions will be eliminated.
To activate this mode, you should swipe the screen and call the Control Panel. In it, you should press the crescent button. The same icon in the upper right corner will confirm the button is on.
You can also activate it in the Settings menu in the Sounds and Tones section. It is worth noting that this mode can be configured to work at a specific time interval.
The ringer/mute switch is on the left side of the iPhone. With it you can control the sounds played through the iPhone speaker.
Why does the mode switch button not work?
The simplest variant is a faulty button. It can be glitchy because of dust or liquid penetration, as well as ordinary mechanical wear and tear. In the first case it is enough to wash and clean the button, but in the second case you will need to replace it.
With the cable is more complicated to deal with. On the one hand, the failure may be simple (loose or oxidized contacts), but on the other hand. possible breakage of the conductor inside the loop.
A vibration motor failure is not very common, but it can be caused by liquid inside or a fall in the case. In this case the vibration mode will not work. In this case the vibration motor must be replaced with a new one. But the most complicated part is a burned out chip. If it’s easy to replace the button or cable, you have to unsolder the chip.
Very often when we’re at official events, on lessons, lectures or meetings we need to quickly switch the phone into silent mode. For this purpose the designers of iPhone invented a convenient button on the left side of the smartphone. If it is activated all water calls and SMS will only vibrate and will not distract you and those present with calls. You should agree that it is very handy and useful.
But even something as simple as the Mute button on your iPhone can break at some point. It may not work physically (you can not move the slider to the right position) or not perform its functions (does not change mode when you move the slider). All of these can be easily fixed by contacting FixLab service center. Our engineers suggest the following causes of iPhone vibrate button failure:
- Mechanical damage: falls, bumps and other unpleasantness;
- Water damage to the phone;
- Operating wear and tear;
- Installation of jailbreaks and other pirated software;
All these actions can lead to the fact that the thin and sensitive to any influences cable of Mute button is damaged. For example, water can cause oxidation on the stub itself or its connector on the board. And in severe cases even rotting of conductive paths on the flat cable. Mechanical damage most often results in disconnection of the cable or damage of the button mechanism itself.
If you began to notice any discrepancies in the work of the switch to silent mode. try to solve the problem yourself. First of all check what mode is set on your iPhone now. Then try a “hard” reboot of the smartphone. This should fix the problem if it is software related. Also it will be good to update to the latest iOS.
If the above-mentioned “procedures” did not help you, you should apply to the nearest service center. Our engineers will make fine-tuning diagnostics and will find out the reason of malfunctioning of the Mode Switch. And they will offer options for solving the problem. In the service center FixLab such diagnostics and repair of iPhone vibrate button will not take more than 40 minutes.
The plume that controls the operation of volume and vibration buttons
Usually if such defect is found the replacement of iPhone volume and vibrate button plume helps to fully restore the functionality of iPhone. Since it often fails. In some rare cases we don’t do the cable replacement, but restoration of the original cable. It depends on the extent of its damage.
What is Airplane Mode on iPhone?
In-flight mode was designed so that the iPhone would not interfere with the airplane’s signaling and communications systems.
Putting your iPhone into Airplane Mode will completely disable cellular, Wi-Fi, and Bluetooth networks.
Consequently, you will not be able to receive calls, text messages or connect to Bluetooth devices while your iPhone is in Airplane Mode.
However, you can manually turn on Wi-Fi and Bluetooth networks on your iPhone, even putting it in airplane mode.
How to turn on airplane mode on your iPhone
All you have to do to enable Airplane Mode on your iPhone is open Settings and move the Airplane Mode switch to the “On” position.”.
You can also go to Control Center and tap the “In Airplane” icon to turn on Airplane Mode on your iPhone.
In addition to mandatory airplane use, you can put your iPhone in airplane mode at any time to save battery power and avoid roaming charges.
Since airplane mode completely blocks the cellular network, it ensures that no calls will reach your device while you are in a country or area where roaming costs are higher.
Airplane mode is also commonly used to troubleshoot Wi-Fi, cellular and Bluetooth connectivity issues on the iPhone.
Which mode to use
If you’re in a meeting, theater or classroom, you can quickly turn off your iPhone with the silent mode switch.
As mentioned above, the iPhone in silent mode can still get your attention by vibrating, lighting up, and displaying banner notifications whenever a call, message, or notification comes in.
Consequently, Do Not Disturb mode is the best option if you are trying to focus on your work and want to avoid all sorts of distractions.
While flight mode is intended for use during flights, it can also be used to disconnect from the world altogether, save battery life, and troubleshoot connectivity issues.