How to enable lte on iPad

Does iPad 4 support 4g network. Russian LTE on iPad Air: how it works? What are the LTE frequencies of operators in Russia

It is hard to imagine a person who has never heard of Apple products and of course the legendary iPhone. Apple products delight us year after year with their innovation and unsurpassed quality. One of the latest new features of the iPhone has made our life better and faster, as you may have guessed, it’s LTE. Of course, we prefer to call it not LTE, but more commonly 4G, because earlier we had 2G and 3G. Of course, 2G and 3G technologies did not disappear, and we use them when we can’t get 4g/lte.

The new technology brings its benefits to users, namely, high-speed data transfer without delays. Now, you can watch online broadcasts of soccer matches and other events without delays, stuttering and freezing of the image. At the moment, the coverage in major cities is pretty good, but there are still places where you have to use 3G, thanks to the phone itself can switch from 3g to 4g. The pioneer and the one who gave us the opportunity to learn what is high-speed LTE, was the operator Beeline.

To understand how to connect 4g and how to configure 4g, you need to be the owner of a smartphone with LTE support, like on the iPhone. If it were that easy, you would buy an iPhone and get 4G immediately, but it is a little bit more complicated. Then you need to find out which operator in your city offers the possibility to connect to 4G. Unfortunately, at the moment this possibility does not exist in all cities in Russia, and in many cities it is simply very bad.

enable, ipad

Which devices support eSIM?

Apple iPhone 13 mini, Apple iPhone 13, Apple iPhone 13 Pro, Apple iPhone 13 Pro Max, Apple iPhone 12, Apple iPhone 12 Pro, Apple iPhone 12 Pro Max, Apple iPhone 12 Mini, Apple iPhone 11, Apple iPhone 11 Pro Max, Apple iPhone SE, Apple iPhone XR, Apple iPhone XS, Apple iPhone XS MAX, Apple iPad, Apple iPad Air, Apple iPad mini, Apple iPad Pro, Apple iPad Pro 11, Apple iPad Pro 12.9

Galaxy S20, Galaxy S20, Galaxy S20 Ultra 5G, Galaxy Note20, Galaxy Note20 Ultra, Galaxy Note20 Ultra 5G, Galaxy S21 5G, Galaxy S21 5G, Galaxy S21 Ultra 5G, Galaxy Fold2, Galaxy Z Fold3, Galaxy Z Flip, Galaxy Z Flip3, Galaxy Watch4 LTE, Galaxy Watch4 Classic LTE, Galaxy S22, Galaxy S22 Plus, Galaxy S22 Ultra

This chip is built into the mobile device. After you activate the eSIM, it will completely replace the physical SIM.

This can be verified in the settings. Currently eSIM is supported by mobile devices certified in Ukraine:

  • Apple iPhone 13 mini, Apple iPhone 13, Apple iPhone 13 Pro, Apple iPhone 13 Pro Max, Apple iPhone 12, Apple iPhone 12 Pro, Apple iPhone 12 Pro Max, Apple iPhone 12 Mini, Apple iPhone 11, Apple iPhone 11 Pro Max, Apple iPhone SE, Apple iPhone XR, Apple iPhone XS, Apple iPhone XS MAX, Apple iPad, Apple iPad Air, Apple iPad mini, Apple iPad Pro, Apple iPad Pro 11, Apple iPad Pro 12.9
  • Galaxy S20, Galaxy S20, Galaxy S20 Ultra 5G, Galaxy Note20, Galaxy Note20 Ultra, Galaxy Note20 Ultra 5G, Galaxy S21 5G, Galaxy S21 5G, Galaxy S21 Ultra 5G, Galaxy Fold2, Galaxy Z Fold3, Galaxy Z Flip, Galaxy Z Flip3, Galaxy Watch4 LTE, Galaxy Watch4 Classic LTE, Galaxy S22, Galaxy S22 Plus, Galaxy S22 Ultra
  • Huawei P40/P40 Pro, ANA-N29, ELS-N29

If you are planning to become our subscriber you can choose any of our tariffs, from TVI Star, TVI Vibro and TVI Optimum.

Read more:  iPad can't see WI-FI network. The main reasons

If you already have a mobile phone Kyivstar, you can choose any current rate Kyivstar.

For prepaid subscribers: you can do it via My Kivstar add-on.

For contract subscribers: it can be done in our store.

You can connect up to nine numbers of any operator and change them using the settings of the device.

N³, only one number will be active. Settings of smartphone can independently select which number will be active.

For prepaid subscribers: to renew number on eSIM you will need a physical SIM.

To renew your number on the eSIM you need a physical SIM.

Calling 1. Apply physical Smart SIM on the site and renew the number by yourself or go to the nearest store.

Croc 2. Activate eSIM on your new device via My Kivstar addon or web version.

For contract subscribers: go to the nearest Kyivstar store and take your passport and identification code.

So, eSIM completely replaces the physical SIM-card.

No, eSIM works as a regular SIM-card. Internet is required only to activate or deactivate the SIM.

Your physical SIM with the same number will be deactivated when you can deactivate the SIM on your phone. If you have a different number SIM on your phone, activation of eSIM will not affect it.

Activate the SIM can only once a month. If in current month you already had an activation and want to do it repeatedly, then please approach the nearest Kievstar store.

If you have transferred your number from SIM to eSIM, for correct operation we recommend to remove standard SIM card from the phone.

  • You need a physical SIM. get the Smart SIM on the website and renew the number by yourself or visit our nearest store.
  • Activate eSIM on your new smartphone. You can do it with My Kivstar. everything is simple and with tips.

How to enable 4G LTE on iPhone and iPad?

Finally, domestic operators have started to expand and improve the quality of LTE-coverage in the periphery. Data transfer speeds relative to good old 3G in this case are of course phenomenal.

All you need to do is to enable support for this wireless standard in your iPhone or iPad. To learn why it’s needed, how to do it and on which iPhone models it is possible, read this article. What gives LTE (4G)? Advantages and disadvantages

Of course, the main advantage of LTE (4G) is the data transfer speed. Pages and other multimedia content will load much faster, and when using your smartphone as a modem you will get a higher level of comfort when working on a PC.

But do not forget that using LTE (4G) networks leads to a faster discharge of the device. Even iOS itself says so when you switch settings.

Which iPhones support LTE (4G) and what are the data transfer speeds?

Not every iPhone has LTE on board. It first appeared on the iPhone 5. But another nuance is that each new generation of iPhone uses a more advanced LTE module, capable of providing more bandwidth. The maximum data transfer rate depending on the model of the device is as follows:

  • iPhone 5, 5c, 5s- 100 Mbps.
  • iPhone SE, 6, 6 Plus. 150 Mbps.
  • iPhone 6s, 6s Plus. 300 Mbps.
  • iPhone 7, 7 Plus. 450 Mbps.

Of course, these numbers can be significantly lower depending on the bandwidth provided by the operator, the remoteness and congestion of base stations.

How to turn on LTE (4G) on your iPhone or iPad?

If the cellular data network is already configured, then turning on LTE (4G) is not a problem:

What gives LTE (4G)? Advantages and disadvantages

Of course, the main advantage of LTE (4G) is the data transfer speed. Web pages and other multimedia content will load much faster, and when using the smartphone as a modem you get a higher level of comfort when working on a PC. But do not forget that using LTE (4G) networks leads to a faster discharge of your device. Even iOS itself says so when switching settings.

Not every iPhone is equipped with LTE. It first appeared on iPhone 5. But another nuance is that each new generation of iPhone uses a more advanced LTE module capable of providing more bandwidth. The maximum data rate depending on the model of the device is as follows:

  • iPhone 5, 5c, 5s. up to 100 Mbps.
  • iPhone SE, 6, 6 Plus. up to 150 Mbps.
  • iPhone 6s, 6s Plus. up to 300 Mbps.
  • iPhone 7, 7 Plus. up to 450 Mbps.
  • iPhone 8, 8 Plus, iPhone X, iPhone XR. up to 600 Mbps.
  • iPhone XS, XS Max. up to 1 Gbps
Read more:  iPad locked says connect iTunes how to unlock

Of course, these figures can be much lower depending on the bandwidth provided by the operator, the remoteness and congestion of base stations.

How to configure Wi-Fi on your iPhone, iPad

If the router of the local Wi-Fi network, which you want to connect to, distributes ip-addresses automatically, then the process of setting up Wi-Fi on your iPhone, iPad is very simple.

You need to go to the next section of iOS-gadget settings: Settings. Wi-Fi

Here you should have the “Wi-Fi” slider on, and below you should select the network you want. After that just enter the password to the Wi-Fi network.

If the IP is not automatically distributed by the router or you need to prescribe DNS, then click the button to the right of the network name and switch to the tab “Statichn.” Here you need to fill everything according to the settings of the Wi-Fi network.

What happens is that Wi-Fi is set up correctly, but the network is not visible or does not connect? There is an option in the network settings “Forget this network” will solve your problems, but you will need to make the settings again.

If you can’t find an answer to your question or you’re having trouble with a solution that doesn’t appear in the Комментарии и мнения владельцев below, submit your question via our help form. It’s quick, easy, convenient and does not require registration. Answers to your and other questions can be found in this section.

By the way, stay tuned to app-s.You can find the solution through our group or on Telegram. We’ve got one hell of a newsfeed.

What iPhones support 4G?

Apple has started to build LTE module into iPhone 5. It means that all iPhones since 5th generation are LTE-enabled.

If you have checked and turned on the settings, but LTE did not appear. Try resetting iPhone network settings. To do this, you can go to Settings = Basic = Reset Settings = Reset Network. The reset deletes all WI-FI passwords and changes the Internet settings to default settings.

If it does not work. It is necessary to check whether the antennas that are responsible for receiving a signal at a frequency of 1800-2200Mhz are connected. Most often the problem is with the antenna responsible for 4G. In this case it needs to be replaced. Signs of a non-functional antenna are bad LTE signal reception. Replacement of this antenna can take up to 40 minutes.

If LTE module (chip on the motherboard) does not work correctly, the phone can reboot and hang up. Also LTE can be missing in the network settings. In this case, the repair may take 3-5 days.

What is the reason for iPhone LTE failure

We should say at once that before you run to the service center with a cry of “it’s all gone”, update and reboot the phone. After that, carefully read our instructions on how to fix the error and only after making sure that all the ways available to the user have not helped, you can go to the service center.

First of all, let’s clarify the most common causes of failure:

  • Malfunction of the module itself;
  • The iPhone is out of network coverage;
  • Malfunction of the operating system of the device;
  • SIM card problems.

If none of these causes is detected, you can try the following.

  • Check to see if the feature is turned on. For this purpose go to “Settings”, “Cellular”, “Data Options”, choose “Enable LTE” or in the menu “Settings”, “Mobile Data” and press “Enable LTE.
  • Try resetting iPhone network settings. To do this, go to “Settings”, “Basic”, “Reset”, “Reset network settings. In this case absolutely all settings are recorded: Wi-Fi networks and passwords, cellular network, VPN and APN settings that were used before.
  • Now check the variant with the system update and try to reload.
Read more:  How to view the memory on the iPad

If nothing helped, go to the Apple Lab.

Lock4GLTE tweak will force iPhone and iPad to connect only to LTE networks

In the midst of the dacha season, many smartphone and tablet users are faced with a problem that is almost impossible to solve on their own. Of course, we are talking about the Internet coverage area. In most cases, the map of LTE and 3G coverage of mobile operators significantly differs from reality due to the objects that interfere with signal propagation. It is very unfortunate, because using the Internet at EDGE speeds is not the most pleasant thing to do, but there is still a solution.

Owners of iPhone and iPad can partially solve the problem, which prevents the comfortable use of the Internet at current speeds. The operating system iOS is arranged in such a way that if the coverage in the EDGE zone is more confident than in the 3G zone, then the device will connect to the first option. The same story happens with LTE connection, which often even on one antenna division can give out more than 10 Mbps. Agree, this speed is more than acceptable for comfortable internet surfing, or even watching online videos.

recently for iOS 7 and iOS 8 was released jailbreak tweak called Lock4GLTE, which forces the iPhone and iPad to connect only to LTE network. So, if in some place there is a constant switching between 3G, LTE and even EDGE, this tweak will be able to solve this problem. After activating the special switch, the device will only work in LTE networks, and if there is no network coverage of the fourth generation, the device will always look for it. From this follows the main disadvantage of this tweak. As iPhone and iPad will automatically search the LTE network all the time, the lifetime of the device on a single battery charge can be significantly reduced, so you should activate this tweak only if necessary. Also keep in mind that in Russian LTE networks voice calls do not work properly, or in some regions they do not work at all over 4G networks.

You can install the Lock4GLTE tweak from the BigBoss repository in Cydia, but in this case we decided to download it from Xarold. Immediately after installing the extension there will not appear any menu items or icons on the device, because the “cherished” toggle switch must be manually added to Control Center. You can do it with the tested and free FlipControlCenter tweak from BigBoss repository.

Immediately after installing FlipControlCenter, you will see an item with the name of this extension in the iOS settings. Click on it and in the list that appears open Active Switches. In the list, find the Lock4GLTE icon and drag it up. After that, you can exit the extension settings and open Control Center with a swipe from the bottom.

By tapping LTE icon with lock you will see the LTE only mode enabled. Accordingly, to turn off the iPhone or iPad to work only in the fourth generation networks you need to press the activated toggle switch again. For example, we decided to show the results of speed measurements in LTE network with one and two divisions, where usually there was a switch to a lower speed 3G network.

You can also make your iPhone and iPad work only on the 3G network with this article.