How to Enable GPS On Huawei Mediapad T3

The Chinese company Huawei is a relatively recent player in the tablet market.

Previously, the company was mainly engaged in the production of household appliances, small gadgets, network equipment, etc. In 2011, their first Huawei Mediapad tablet was released, which the market did not ignore, due to the excellent price-quality ratio. At the end of 2012, the premium flagship tablet was announced, which competed well with the already released Asus and Aser products. This tablet is the Huawei mediapad 10 fhd tablet, where Fhd is the FullHD display extension, which is 1920 × 1200.

This 10-inch tablet is a worthy continuation of the Mediapad line, with impressive technical characteristics that are not inferior to its main competitors in this market segment. The standard equipment of the tablet includes: the tablet itself, miniUSB-USB 2.0 cable, charger with a USB connector.

Specifications and Design. Specification:

  • Display. 10.1 inches, resolution 1920 × 1200 (16:10), IPS
  • OS. Android 4.0, modification. Ice Cream Sandwich
  • Processor. 1.2 GHz, HiSilicon K3V2 (Cortex A9 (quad))
  • RAM. 2 GB
  • Internal memory. 16 GB, support for 32 GB SD-cards (SDHC) and SDXC (up to 64 GB, file. NTFS system)
  • Cameras. Front 1.3 MP, Rear 8 MP
  • Wireless networks. Wi-fi, 3G, Bluetooth 3.0
  • Navigation. GPS
  • Battery. 6600 mAh lithium-polymer battery (up to 8 hours at medium brightness and without network)
  • Additionally: built-in speaker, built-in microphone, headphone or microphone jack, LED flash, accelerometer, gravity module, as one of the options USB-host keyboard.

Specifications

There is little information about the processor with which the tablet has been released, it is known that it is 4-core, it is Huawei‘s own development based on the Cortex A9 architecture, the clock frequency is 1.2 / 1.5 GHz, and according to the developers it is even slightly ahead of its main competitor Tegra 3 in performance. The tablet is one of the few that has 2 GB of RAM, which will allow tablet applications with any resource requirements to work without hangs. The internal memory on the tablet is 16 GB with support for a memory card up to 32 GB (SDHC) and SDXC cards up to 64 GB. As an additional option, you can purchase a dock keyboard.

Read more:  How to Charge Huawei P20 Pro

Design and layout

A 10-inch tablet comes in one color option. white. The design is elegant and not catchy. The 10.1-inch display is surrounded by a black frame without touch buttons, framed by a white case. Above the display is a front 1.3 MP camera. The tablet is well protected from mechanical damage, due to the fact that almost the entire back of the tablet is covered by an aluminum case with a white plastic insert in the area of ​​the rear camera. This matte insert is one of the drawbacks of the tablet. easily soiled (after a short use, the tablet looks untidy).

How to Enable GPS On Huawei Mediapad T3

The dimensions of the tablet are 257.4 × 175.9 mm. At the same time, it belongs to the ultra thin (only 8.8 mm) and which is important for operation. the lightest among competitors (580 g). The assembly of the tablet huawei mediapad 10 fhd 3g is of high quality, when using it there are no backlashes or creaks, the aluminum back cover is not deformed.

1st layout of elements

2nd layout of elements

Schematic layout of the elements of the tablet

  1. Built-in microphone
  2. Memory card slot
  3. Light sensor
  4. Front camera 1.3 MP
  5. Power Button
  6. Volume control
  7. Wi-fi / Bluetooth Antenna
  8. 8.0MP rear camera
  9. Flash
  10. GPS antenna
  11. Headphone or microphone jack
  12. Stereo speakers
  13. Multifunction port
  14. Keyboard Connectors

Installing a memory card and SIM card. To install an SD card in a huawei tablet 10 you need to:

  1. Expand tablet back up
  2. Open the protective cover of the SD memory card slot
  3. Expand the memory card with the contacts facing up, insert it into the slot and push until it clicks.
Read more:  How To Enable Forwarding To Huawei

Inserting a memory card

The extraction occurs in the reverse order.

Remember, to safely remove the SD card, you must either disconnect the tablet, or go to the Main menu. Settings. Memory. Disconnect the SD card.

To install a SIM card, you must:

  1. Expand tablet back up
  2. Open the protective cover of the SIM card slot
  3. Expand the SIM card with the contacts up, insert it into the slot and push until it clicks.

Removing a SIM card is performed in the reverse order.

Remember, before installing the SIM card, you must turn off the tablet, or after installation, restart, only after turning on the SIM card will be automatically detected and registered with the mobile operator.

Wireless networks

The Huawei mediapad 10 tablet supports Wi-fi, 3G, Bluetooth 3.0 networks. It is possible to turn the tablet into a USB modem, for this you need to connect to any of the wireless networks. Then connect the tablet to the computer via the USB cable. Go to “settings”. “wireless networks”. “.”. “modem / access point mode”. A message appears stating that the tablet is in USB modem mode.

It should be remembered that if the networks are not used, they must be turned off, if this is not done, the battery will drain much faster.

Wi-fi connection

  1. Find the Settings button on the desktop
  2. “Wireless networks”
  3. Set the switch to the “ON” position in the Wi-fi section (if previously connected to the network, the system will automatically connect to the last used one).
  4. A list of available wireless networks will be displayed.
  5. Select the necessary one if the network is protected, a password or key will be requested

Wifi connection

Bluetooth setup

  1. Select “Settings” on the desktop
  2. Find “Wireless Networks”
  3. Activate “ON” on the Bluetooth switch
  4. The system will automatically start searching for available networks, or devices ready to pair with your tablet.
  5. Select the desired device and click on it
Read more:  Huawei P20 Pro Does Not Turn On

3G connection. In order to connect the mediapad 10 tablet to 3G, you must:

  • Find the Settings button on the desktop
  • “Wireless networks”
  • Click “”
  • Mobile Network
  • Put a tick in the column “Data transmission”, which is located in the window “Configuring the cellular network”
  • Select “Access Points (APN)”
  • Choose your operator’s point from the available access points. If there is no access point of your operator, press the key (6) and select “New access point”
  • Enter the data from the table below, if the desired operator is not in the table, contact the operator and get the settings

Problems and their solution

Remember, if the tablet is under warranty service, you should not solve problems yourself, it is better to use a service center. If the warranty is over or the service did not help, solve the problem yourself at your own peril and risk.

  • Marriage or damage to the tablet (marriage was noticed in the first lots)

Carefully inspect the tablet before buying for factory defects, broken display pixels, cracks or scratches, if necessary, require a replacement

Put on charging and neigh for several hours. If it does not help, connect to the charger with the Volume button held down. If the tablet does not turn on, carry it to a service center.

  • The tablet freezes when you turn on the welcome screen and does not respond to actions.

Press the “Power” button and wait for the tablet to turn off. If the problem repeats when you turn it on again, most likely the problem is in the firmware. To solve it, you need to go to the official website of the developer http://www.huaweidevice.com/en/, in the “Support” section, select “Downloads”. Find your model and download new firmware. You will find all instructions for installing the firmware in the archive. If it doesn’t help, only the service will help.

Getting Root Rights

Remember, when gaining root rights, the Huawei 10 tablet may not be accepted for warranty service.