How to distinguish the original iPhone x display

2. Appearance.

1. Installation of screens in the case:

After installing the copies of the screens for iPhone 7/7 Plus into the case, we found that all the copies made in China for the iPhone 7 series sat in the seats evenly, the hole for the Home button was of the correct size, there were no gaps between the case and the screen. In general, it looks quite as good as the original assembly. Below you can see in the photo how it looks.

distinguish, original, iphone, display

3. Display test.

During our test, we found that the display color and brightness of the Chinese-made iPhone 7 appear slightly different from the original, although this does not affect the touch function. And to be honest, on the copy there may be some black dots on the screen, as well as small dust inclusions that get there during the glass gluing process, since of course not all manufacturers in China can afford to use expensive air purification systems in the workshops where the modules are assembled. But without any doubt, this can be solved with the technical improvement of production.

A. Apple Marking.

In the images above, we could see that there is no difference between the Chinese copy and the original on the front side and they basically look the same, however, let’s look at the modules from the back side. Here we can easily determine where the original screen is and where is the copy by the presence in the upper right corner of the Apple marking on the original, on the copy there are no markings, this is clearly seen in the photo below.

C. Unprotected microcircuits

Another difference between the original and the copy that is striking is the more careless production of the screen by Chinese manufacturers. The screen copy of the iPhone 7 has open non-insulated microcircuits, similar to what we saw on other screenshots of older models of the iPhone 5 and iPhone 6. This arrangement of the chips has a higher potential for the risk of electrostatic damage and, most likely, such cases are quite common, therefore this problem needs to improve.

iPhone X Screen Original VS screen Aftermarket 130€ di differenza

B. Display loop.

Comparing the two screens of the iPhone 7, we can find that the display cables are significantly different, the Chinese copy has additional microcircuits, but the original one does not. In the original display of the iPhone 7 series, the flex cable coming from the 3D touch panel is integrated into the common flex cable, while in the copy this flex cable is soldered to the flex cable from the screen. This can be seen in the photo below.

Touch function.

The touch sensitivity of the screen, namely, the correct operation of 3D touch (recognition of the pressure on the touchscreen) is an important part for the service center to make a decision to use it in the repair of a Chinese copy, fortunately, during our test, the touch functionality on the iPhone 7 and 7 Plus worked well. with the exception of one part of the iPhone 7 display, 3D touch did not work very well on the center of the screen.

How to tell an original iPhone display from a copy

IPhones are in high demand and counterfeits of both the iPhones themselves and their components are common. Unclean service centers are always ready to make unclean profits by using low-grade cheap copies of displays.

IPhone owners should be more careful and know how to distinguish the original iPhone display from the copy. We propose to consider these signs.

Oleophobic coating

It is found in original displays and is absent in fakes. The oleophobic coating is the thinnest nanometer-thick film. Its function is to repel fat from the fingers from the touch screen.

To check for this coating, draw on the glass with a marker. On an oleophobic coating, the pattern rolls into drops, and after a few seconds it will disappear altogether. This effect will not happen on fake glass.

But some fake manufacturers have learned to create a temporary hydrophobic coating. The first time the line drawn with a marker will roll into balls, but the next times this will not happen. Therefore, try to check several times in a row.

Image of a white Apple on the train

The original display has the Apple logo on the ribbon cable. They were too lazy to apply it to a fake. And this is good. the easier it is for us to distinguish the copy. Although some copies have Apples on their trains.

Printing on the back of the display

The Chinese copies distinguished themselves in this. they have stamps and seals, which should not be on the original products. The more stamps, the more resellers there were after the part was released from the factory.

QR code

There is a QR code on the inside of the Apple display. Copies have it too, but it can be easily removed by wiping with an alcohol wipe or scratching with a hard object. This cannot be done with the original QR code. it is applied securely.

Touchscreen controller

In the original displays, it is made with high quality. The reliability of this component is very important. the sensitivity of the display to your touch depends on it.

Screen resolution

The quality of this indicator will be clear after installing the display. If you see broken pixels, extraneous stripes, glare on the screen, you can be sure that you have been given a fake display. And even changing the settings of the screen settings will not save the situation.

Now you know how to tell the difference between an original iPhone display and a copy. “Display Master”. the leading company in the replacement of iPhone X glass. We re-glue the glass on all display models.

Read more:  Copying Data From iPhone To iPhone

In our service center “Display Master” they always install high-quality displays.

How to distinguish an original Iphone display from a copy

Welcome dear friends on our website! Earlier, I already wrote to you about how to distinguish the original Iphone 6 and Iphone 7 from quality Chinese counterfeit and remanufactured. Who cares be sure to read these articles by following the link.

iPhone X OEM vs 3rd Party Screen Replacement

In today’s article, I would like to touch upon one of the main distinguishing features of Apple phones. the display. Well, to be more precise, then by what external signs can we distinguish the original Iphone display from a replica copy and a refurbished one.

Comparison of displays Iphone – original or copy

What external features of the display can distinguish the original Iphone from counterfeiting

So, let’s get started! The differences between the original display and the copy will be on the most popular Iphone 6 model today.,

    The original display, in contrast to copies, replicas and reconditioned ones, has a richer color gamut. Colors are not refracted, everything is displayed as it is.

Original Iphone 6 display. richer colors than replica
Another of the features of the original Iphone display is that when installed in the case, the edges are not felt. That is, there are no drops at the junction of the display and the case.

The original display of the Iphone 6. the junction of the display and the case has no drops and edges
The difference in aerophobic coating of the original Iphone display and the Chinese copy is obvious! The paint on the original rolls into drops, on the copy it is simply smeared.

The difference in aerophobic coverage
The original module has markings, the Apple logo, there is foam rubber on the display connectors, the cables are hard black, the camera opening at an angle shimmers with blue or green (mineral glass). The corner in the frame is sealed with tape, there is a QR code under it. On copy or, re-glued screen from open. Copies of foam rubber, no Apple logo, plume of different colors, or light, thin.

Thickness difference between original Iphone 6 display and copy

  • Also, the original screen does not in rare cases differ in thickness. Very cheap copies are thicker and protrude from the body. In the first photo, the line of the body goes to the edge of the frame and glass, smoothly and aesthetically In the second photo, we see a clear step of the frame, which protrudes from the body.
  • How to check if the display is original Iphone

    The easiest way to distinguish the original display on the iPhone from the Chinese is to draw a line with a marker directly along the front panel of the sensor. Let’s see what happened:

    • The original touchscreen has the ability to dissolve touch stains and dirt. Therefore, the marker trail will spread out into several tiny dots. Even with repeated erasing and drawing, on the iPhone touch glass.
    • For a good Chinese copy of the iPhone, for the first time, it may turn out approximately the same, but with subsequent attempts to reproduce the masterpiece, the strip will remain more and more bright and clear. The success of the first attempt is due to the availability of all kinds of protective equipment on the market, allowing you to temporarily repel dirt. But with each new wiping, this layer becomes thinner and less effective.

    The fact that the Chinese screen module is installed on the iPhone can be understood immediately by the following signs:

    • When tilted, a track of pixels becomes visible on the display
    • In sunlight, the picture is less bright and clear
    • When scrolling with your fingers, noticeable inhibition of response, or slippage
    • Malfunction of the light sensor

    Well, that’s basically all! I think with this baggage of knowledge, you can easily distinguish the original display on the Iphone from the Chinese copy.

    Display quality and appearance

    The branded display is flawlessly crafted. Any kind of abrasion, roughness, damage is a sign of imitation. Apple screens have a hydrophobic coating. The overwhelming majority of fakes cannot boast of such a characteristic. To find out where the original is, you need to draw a line on the display with a simple felt-tip pen. If the detail is real, then the drawn strip will dissolve and after a couple of seconds it will completely disappear. Some fake manufacturers have managed to make the hydrophobic coating “for a while.” In this case, it is necessary to draw a line on the screen many times, after a while such a coating will cease to work.

    How to tell an original iPhone display from a copy

    A damaged screen is a common breakdown that anyone can stumble upon. Subsequent repairs require careful selection of parts so as not to stumble upon a Chinese counterfeit. Let’s analyze the main methods of distinguishing a genuine display from its counterpart.

    Manufacturer’s logo and display components

    Component parts of Apple appliances must have an “Apple” label, a numerical or QR code that cannot be erased or scratched, with the exception of counterfeit parts. everything on them can be easily erased with an alcohol wipe.

    You also need to make sure that there is a green and blue tint on the camera lens and glass.

    Consider the edges of the part, they should be securely attached to the base. A significant proportion of counterfeits have poor bezels, making installation problematic.

    Screen resolution

    The permission can be checked when the screen is already installed. It should not have dead pixels, reflections, extraneous stripes. In addition, the slow response of the smartphone after pressing on the display is a confirmation of the fake part.

    Protective stripes

    Take a look at the back of the part. There you will find the digitizer protection strips. They are placed vertically in relation to the display. If there are no protective stripes, you have a fake spare part in front of you.
    When the screen is already installed, look at it in the sun. The analogue will be visible immediately. the display will be dim and blurry.

    Read more:  How to turn off iPhone x

    How to distinguish the original iPhone display

    Privacy Overview

    Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.

    CookieDurationDescription
    cookielawinfo-checbox-analytics11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category “Analytics”.
    cookielawinfo-checbox-functional11 monthsThe cookie is set by GDPR cookie consent to record the user consent for the cookies in the category “Functional”.
    cookielawinfo-checbox-others11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category “Other.
    cookielawinfo-checkbox-necessary11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category “Necessary”.
    cookielawinfo-checkbox-performance11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category “Performance”.
    viewed_cookie_policy11 monthsThe cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

    Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.

    Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.

    Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.

    Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.

    Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.

    How to distinguish an original display on an iPhone from a copy

    When working in a repair center for Apple technology, you come across various situations that can arise only with iPhone owners. Just because no other brand. from those existing on the market, does not differ in such excitement around its own originality. And situations can be funny.

    For example, they bring in a broken iPhone for repair, bought for a very decent amount. And when disassembling, it may turn out that this phone is half Chinese, moreover, it is second-hand.

    Or, you need to replace the display with an iPhone, and instead of a broken one, the client offers a screen module, bought with his own hand. Which, for verification, turns out to be the production of the china industry, and even not of the most worthy quality.

    Therefore, today we will talk about the pressing problem, if it is necessary to replace the iPhone display, the problem: how to distinguish the original display on the iPhone from the Chinese one. To do this, consider each of the representatives in more detail.

    So, before us are two screen modules: Chinese and 100% original.

    The main difference is the workmanship. Real Apples are made up of the highest quality ingredients that are perfectly accurate and matched to each other. Therefore, if any element is loose, or has burrs, rest assured, it came from Chinatown. However, Kitayprom is not standing still either, so everything may be all right with that.

    Let’s start an exciting game. find the differences!

    Now, let’s turn both modules upside down, the first thing that the original screen can boast of is the presence of vertical, protective stripes on both sides of the display. their function is to prevent gaps on the sides of the digitizer. The Chinese, of course, have no stripes.

    In the licensed module, all components are reliably protected by special stickers and inscriptions, indicating codes and serial numbers.

    Next, let’s look at the display and sensor cable. In the original version, both connectors must be fully labeled. But the option of the presence of data on only one train may indicate that the sandwich is prefabricated. Most often, it is arranged according to this principle: the Apple display, but the senor, is already Chinese. What follows from this, we will consider later, but for now we will continue to search for differences.

    Fortune telling by marker strip, or test for oleophobic coating.

    We are not looking for easy ways, and therefore, the easiest way to distinguish the original display on the iPhone from the Chinese was left for a snack. It will require a regular marker. We draw a line with a marker directly along the front panel of the sensor. Let’s see what happened:

    • The original touchscreen has the ability to dissolve touch stains and dirt. Therefore, the marker trail will spread out into several tiny dots. Even with repeated erasing and drawing, on the iPhone touch glass.
    • For a good Chinese copy of the iPhone, for the first time, it may turn out approximately the same, but with subsequent attempts to reproduce the masterpiece, the strip will remain more and more bright and clear. The success of the first attempt is due to the availability of all kinds of protective equipment on the market, allowing you to temporarily repel dirt. But with each new wiping, this layer becomes thinner and less effective.
    Read more:  How To Distinguish Iphone 3gs From Iphone 3gs

    What’s wrong with the original iPhone display?

    The specialist will immediately understand that the Chinese screen module is installed on the iPhone:

    • When tilted, a track of pixels becomes visible on the display
    • In sunlight, the picture is less bright and clear
    • When scrolling with your fingers, noticeable inhibition of response, or slippage
    • Malfunction of the light sensor

    In addition to the indicated disadvantages of use, the Chinese screen also breaks much more easily than the original one, because, due to savings on materials, it has increased fragility, with significant hardness. This means that the replacement of the iPhone glass, for its owner, will occur more often.

    Comparison of the iphone x display. Original and copy. How to distinguish

    They brought us an iPhone X for repair and asked to restore it after water. The screen has gone out but calls are coming.

    Inside, the iPhone suffered a little, so the client decided not to give all the best for repairs and asked to install not the original iPhone X display, but a copy. Our for iPhone display replacement: here.

    Attention! Replacement of the back glass of quality ORIGINAL on the iPhone at the link: Zamnea rear glass of the iPhone.

    We, in turn, took this opportunity to make a small comparison of the copy and the original screen. Look further.

    If you have a crashed display on iPhone X, there will also be useful information on replacing glass and display in our service:

    • Display replacement = from 7,000 rubles;
    • Exchange of your old phone for a new one. from 5000 rubles.
    • Call or email us on WhatsApp for more detailed and up-to-date information;
    • Exact cost after free diagnostics.

    Having connected a new Chinese screen, you will not notice the difference at first glance. Basically, the copy is not cheap, so the image quality is ok.

    From the inside, upon a cursory examination, the displays are also similar, but let’s take a closer look and find the differences 🙂

    The first thing that catches your eye windows in the display for the camera and Face-ID. The Chinese display has them golden and the original has greenish.

    A fragment of the board with tracks is visible between the cables and the lid covering the microcircuit. In the original, thanks to the matte coating, the tracks are barely noticeable, the Chinese copy has glossy paint and the tracks are more noticeable.

    It is not clear why the Chinese would put a QR code in this place, if the original does not have it here. Perhaps they do not hide that this is a copy, and the code is needed for additional information about the display.

    There is another microcircuit at the bottom of the loop. The original has a more contrasting QR code. The ribbon on the copy of the iPhone X display is stamped. Typically sealed by suppliers of spare parts to implement the warranty.

    On the metal plates, where the connectors on the cables are located, in the early versions of iPhone models such as iPhone 5,5s, 6,6s, etc., black soft seals with a thickness of 1-2 mm were glued. And it was possible to distinguish the original from the copy simply by the seals on the trains. The original had seals, the copy did not. Now on the displays of the iPhone X this is not a sign 🙂 they are not here or there 🙂

    At the bottom in the center there is a long such microcircuit. She is very fragile, but not about that. Here, too, black stripes are clearly visible on the copy of the iPhone X display, the original is barely noticeable.

    And now the most important sign is how to determine that the iPhone X has an original screen or a copy. The signs of the original glass have been like that since the days of Nokia 8800. There was a feeling that the original glasses had some kind of darkening, and the edging on the glass was less noticeable, the copy had weeks. So it is with the display of the iPhone X. Look at the transition from the places where the pixels of the matrix are located and where there is simply black paint on the back of the glass. The original display made a more imperceptible transition.

    In general, we can say that the copy of the display is made at a height. Do not forget that the Chinese made the fake display also high-tech and put the same expensive AMOLED display there, so the copy turned out to be cheaper. but not by much.

    We advise you not to drop your iPhone X or get it wet in water. They bring us broken and non-included ones after a little immersion in water. And often AMOLED displays fail after taking underwater selfies. The dot projector Face ID also breaks quickly.

    Take care of your gadgets, well, since they broke, then run to us. We repair the iPhone quickly. You can get acquainted with the for repairs on the page: link