How to Connect Tp Link to a Computer
In the 21st century, people are unable to live without the Internet. However, compared to the beginning of the century, when all devices were connected via wires, now they are connected via wireless routers. Consider the features of setting up a TP-Link router. Models of this company are popular for the price-quality ratio. All actions are successfully applied to almost all TP-Link routers.
Regardless of the model, the TP-Link router, its configuration, do not cause problems even for inexperienced users. In most ratings, the Chinese company’s routers are leaders in different categories, giving better performance than competitors.
Visually “Wi-Fi” TP-Link routers are attractive, have rounded shapes. The plastic is glossy, which is a slight minus due to the soiledness. The delivery set is standard, it includes:
- Power adapter;
- Short network cable;
- Software disk (software);
- Manual and warranty.
On the upper part there are indicator lamps. Due to the large number of holes, the router does not heat up. Bottom. Rubber feet, thanks to which it does not slip, and a sticker with data, starting from the standard password, ending with the login address on a special administration page. The ports and buttons are located behind. And the antennas are placed on top.
Where to install
The question is often asked about where to install the TP-Link modem. The main thing is that you can not put on devices whose working frequency is 2.4 and 5 GHz. It is better to attach it to the wall, hanging it by special devices, or install it on an open shelf in a table, cabinet, away from mirrors. Fix the antennas in an upright position.
Connection and preparation for work
The process of connecting TP-Link to a computer or laptop will not be a big deal. To do this, insert the cable provided by the provider into the connector on the back of the device. Then plug the power adapter into a power outlet. After about a minute, the router will be ready to go. A light indication that has ceased to change “will tell” about this.
How to configure TP-Link router correctly
The wi-fi configuration of any TP-Link router is unified, does not cause any problems. Over, you can do both quick setup of the TP-Link router, and more thorough, manually.
In order to understand how to quickly configure the TP-Link router, go to the IP address indicated on the sticker on the bottom of the device. This is usually 192.168.0.1. The fields for login and password will open. The username is admin, the password is admin. Then go to the “Quick Setup” tab. After that, click “Next”, select the country, provider, type of connection.
It is also recommended to put a checkmark in front of the inscription “I did not find suitable settings.” Type of connection to choose during configuration. In this case, it is Dynamic IP, or “Dynamic IP Address”.
Manual internet connection
Somewhat more difficult to do everything manually. The IP address, gateway, subnet mask and other exact settings for the TP-Link modem, ensuring its correct operation, should be checked with the provider, select the desired type of connection and then fill in all the fields yourself to gain access to the Internet.
For an example, consider how a TP-Link router connects to a network with a provider called Dom.Ru. In the past, you had to find out the mac address, but now this archaic way does not exist. You must open the “Network” section, then go to the WAN submenu.
In the fields “Username” and “Password” indicate the username and password that are specified in the contract. Select the “Always active” checkbox. As a result, after saving, the Internet should work.
First, open the Network section and go to the WAN submenu. Then select the type of connection, most often PPPoE, but the setting is identical for other types. Write in the fields for login and password the information specified in the contract. Check the box “Always active”.
When setting up TP-Link for Beeline, go to the administration page at 192.168.0.1 and then go to the Network item. L2TP / Russia L2TP is set in the WAN Connection Type field, and, accordingly, the username and password issued by the provider when concluding the contract are recorded in the necessary fields. Check the box next to “Auto Connect”. In general, the settings make it easy to connect to the TP-Link router, regardless of the provider.
Wireless network for TP-Link is configured on the Wireless. Wireless Settings tab. In the special field Basing settings, the name of the network, invented independently, is set. Having entered Wireless Security, the connection security is configured using a password and encryption.
Setting in Repeater, Amplifier, Adapter, or Access Point Mode
To configure TP-Link in the mode of a repeater (repeater), amplifier, adapter or access point, go to the wireless network settings field, where in the “Operation Mode” in the drop-down list, select the option you need.
Modern TP-Link routers support IPTV. Interactive television. There is the ability to configure and watch IPTV over Wi-Fi on any device. In the event that there is a special prefix, it is recommended to select the necessary LAN port that works as a bridge for it. All this is done in the “Network” tab, where you need to switch to IPTV.
Individual user connection settings
There are no possibilities for introducing additional users with individual settings through the web interface of the equipment for TP-Link models.
To enable dynamic DNS in TP-Link, you must go to the DDNS tab. If you have registration on the resources presented in the drop-down menu, enter the login, password and domain, check the “Enable DDNS” checkbox and click “Next”. If the transition is not possible, click on the hyperlink and register.
To protect data, the password set by the manufacturer must be changed. To do this, find the Password field and enter a new password. In the “Protection” tab, in the “Setting basic protection” subsection, check the box to enable the SPI firewall. You can install specific computers from which the interface is locally controlled. To do this, in the “Protection” tab, go to the “Local management” submenu, where you can specify the MAC addresses of computers that are allowed to access the configuration interface with administrator rights.
To exclude the possibility of remote access, go to the sub-item “Remote control” and set its IP address: 0.0.0.0. Any other IP address is a potential vulnerability, for example, having registered in the field 255.255.255.255, remote access is opened for any other computer.
It is necessary to update the software on a regular basis, because the manufacturer regularly releases “patches” that protect attackers from breaking the device.
On the router page, the corresponding tab is selected. Check the box next to “Enable parental control.” After that, enter the MAC address of the host computer in a special field. Copying the address of the PC on which the settings are made is easy: with the click of a button.
Below are the MAC addresses of all monitored computers. The schedule is configured: day, time of action. A “white” list of sites for unhindered visits is being formed.
Change Button Function
There is no standard mechanism for redefining buttons in the configuration interface for TP-Link models.
Setting up a torrent client
There are no standard methods on the TP-Link TL 841n interface page for configuring torrent clients. However, third-party dd-wrt firmware is installed, turning almost any router with a USB port into a torrent client. It is also possible, without using computer resources, to download torrent files to a USB device connected to the router.
You should go to the official website of the dd-wrt firmware developer. In the field that opens, check the compatibility of a specific router model with firmware. If successful, select and download one of the versions. Be sure to make a “backup” of the factory firmware of the router, and then install dd-wrt through the patch cord. Then you need to download the Optoware program and install it on a USB drive that is formatted for Linux. During the setup process, the Transmission utility is installed. An analogue of the torrent client. Through the Transmission Remote utility, its remote control is performed, during which torrents are added or removed, speed is limited, etc.
As with all modern modems, the router settings include the print server function. Of course, this is done by standard means of Windows 7, 8, 10, but it is much easier to use the specialized utility TP-Link USB Printer Controller, the installation file of which is located on the official TP-Link website.
Configuring DLNA on a router
Since 2011, after the May firmware of TP-Link routers, support for the Media Server function appeared in the settings menu. Using a standard player or even a regular game console, you can share media files. To do this, go to the modem settings, select “USB Settings”, and then. “Media Server”. After that. Shared folders. After starting the player, it will find the created media server.
The question is how to establish a VPN connection between two modems. For the first, the router settings are set to the “Server” mode, and for the second, respectively, the “Client”.
To configure the “Server”, go to the VPN tab, select the Ip Address Pool field, where the necessary addresses are added using the Add button. In the L2TP / PPTP Tunnel tab, PPTP is installed, and Mode is set to Server mode. New login and password are filled in a special field. Tunnel is set to LAN-to-LAN. After that, it remains only to confirm activation.
The “Client” setting is identical, except that the Client mode is set in the Mode field.
Possible malfunctions and solutions
If the router does not respond to the connection to the mains, the indicators do not light up, you should check the power button. The router may have burned out.
If the router doesn’t distribute the Internet, there are options:
- Due to problems from the provider. In this case, you should either just wait for a while, or call technical support. If experts say that everything is in order with them, then the problem is with the router. It is worth trying to reboot the router itself. In the vast majority of cases, this will be a solution.
- Settings failed. The easiest way is to reset to factory settings using the Reset button.
How to connect to a TP-Link router to upgrade firmware
The software is being improved, “patches” and improvements, additional functions are being released. Accordingly, the question arises of how to install the current TP-Link router firmware. There are two ways to do this:
Via web interface
Going to the site, select the version of interest and download. So that the settings do not fly off, you need to update the firmware only through the network cable through the computer. The WAN cable is disconnected. From the provider. And the router connects to the computer through a patch cord. And then proceed according to the installation program instructions.
Via the mobile app
Tp-Link has created an application for smartphones and tablets called TP-Link Tether. It works on Android and iOS. With the help of this program, a Wi-Fi router is managed, configured and updated. Everything is intuitive, as in the vast majority of modern applications. Just go to the page, select a router, go to the system settings and click “Update”.
Reset TP-Link router settings to factory
Sometimes people make mistakes, don’t know how the router should be connected, they forget that they should record personal data or accidentally delete something. The question is how to reconfigure the router. You should use the factory reset to the default settings. To do this either through the tab “System Tools”, or by pressing the WPS | Reset button. There will be a reset to the original, factory.
The advantages of TP-Link routers are:
- Powerful signal that easily covers a large area.
- The presence of a WPS button.
- Mild heat.
The disadvantages, first of all, are not the prettiest design of the admin interface; for competing companies, it is made in a more stylish form. Also, most routers have gaps that make dust difficult to clean. But the cons, of course, are unable to “outweigh” the pros.
Analysis of user opinions shows that in most cases they are laudatory. Highlight quality, reliability, low cost, range, ease of setup and reconfiguration. TP-Link models are ideal for value for money.
Currently, using the World Wide Web goes far beyond just surfing the net. Users do not want to just browse the web, but listen to music, watch their favorite TV channels.
Firm TP–Link often modifies its own devices while maintaining the original name. Router TP–Link models TL-WR940N is the first version released in 2010.
Company TP–Link specializes in the manufacture and supply of network equipment with the goal of creating wireless communications at home. Vendor models support any data transfer protocol regardless of provider. Consider the example of ko.
Currently, unlimited high-speed Internet is no longer a novelty. And even more so when it comes to the wireless connection option, which is applicable even to a personal computer, not to mention laptops, tablets or smartphones. Now most mobile devices have a built-in WiFi module, and their comfortable use directly depends on how high-quality wireless connection is established in your home and how well everything can be connected to a computer.
TP-Link WiFi routers are a good example of solving problems with speed, range and antenna power. Also, you are guaranteed to get rid of the wires in your apartment. After you have purchased a router, it is very important to understand how to properly connect the device to your computer yourself. The fact is that if you have already completed the Internet, then a lack of knowledge on this issue can lead to additional costs for the call of specialists.
In the article we will try to tell you how to properly connect your TP-Link to a computer and make its subsequent configuration.
First of all, you need to open the box and make sure that the TP-Link router equipment is the same as that described in the documentation. That is, make sure all items are in place. In addition to the router itself, it is necessary to have a power supply, cables, as well as a software disk.
The TP-Link router has the following buttons and connectors, most of which we will need when connecting and configuring:
- Power button;
- WAN connector for connecting the router to the Internet;
- LAN-connectors for connecting a PC using a network cable;
- Turn off and on the QSS function;
- Button to reset the router.
After you familiarize yourself with the location of the connectors, you must connect the power supply to the TP-Link router, and plug the unit into a power outlet. In the WAN slot, located on the device’s case, a cable is connected that was carried out by the provider, that is, connecting directly to the Internet. The TP-Link configuration requires at least four LAN ports, so you can connect four personal computers at once if you use a network cable.
Configure TP-Link Router
Before proceeding with the setup, experts recommend a preliminary reset to the factory settings. After the router has rebooted, use any browser. In the address bar, enter 192.168.0.1. Another option is 192.168.1.1, depending on the firmware version. You will automatically get access to the “Setup Wizard”.
To get inside, enter the password and login. By default, both lines are admin. For further security of the network, it is better to change the password during the pre-configuration in question at the moment. To change the input, go to the System Tools tab, where you need to click on Password. In the fields Old User Name and Old Password, you will need to enter the factory login and password, that is, admin. Create a username and password. In principle, you can leave the login and the old one. Enter the new data in the New User Name, New Password, Confirm New Password fields. The last field is the confirmation of the new password. Remember to save the updates by clicking Save.
On the settings page, you can optionally immediately download and install the latest firmware version. The installation itself is carried out through the System Tools menu, where you need to go to the Firmware Upgrade field. In it, click on Browse, select the downloaded file and click on Upgrade. Downloading should be done only from official TP-Link resources. Fully licensed firmware is provided absolutely free.
Internet configuration in the TP-Link router occurs in the Network and WAN menus. The first thing to do is select the type of network. If you don’t know it, then just check it by calling the provider’s Hotline. After you have selected the type, you will need to save the settings, for which you need to click on Save.
After saving successfully, go to the next tab designated as MAC Clone. There is a Clone MAC Address button, which you need to click on, and then save everything with Save.
How to configure a WiFi network on a tp link router
To configure a wireless connection, you must go to the Wireless tab. There is a field under the designation Wireless Network Name. The name of your network fits into it, and it can be chosen arbitrarily. If desired, enter the name of the country in the field below. Remember to save all changes.
On the Wireless Security tab, the security system configuration is configured, including protection against unauthorized access. To do this, you need to come up with a not-so-simple password and enter it in the PSK Password column.
All changes in the settings must be saved, after which the router must be rebooted. You need to reboot the device from the Reboot button located on the System Tools tab. After clicking on the button you just need to confirm your action.
As you can see, there is nothing difficult in connecting and configuring the router yourself. It is really simple and does not take much time. And you can save money on calling specialists and the time during which you would have to wait for them.
In this small step-by-step instruction for dummies, I will show you how to connect the router to a computer using a network cable. If we are talking about a laptop, then it must have an Ethernet port. If it is not, then you can make a connection via WiFi. In the future, there are two ways to configure the router. Through the web interface of the control panel or using the utility on the CD. I will analyze the connection of routers through a network wire using the TP-Link TL-WR740N and TL-WR741ND as an example, but this guide is suitable for any model.
Connecting the router to a computer via a network cable
The first option to connect the router to a computer is using a network cable, which is in the box with any device of this type. Typically, a stationary PC does not have a wireless module, so it is advisable to connect it with a wire.
- WAN. Used to connect a cable from an Internet provider to it
- LAN. For a patch cord from a computer
In more detail about the purpose of the WAN and LAN ports, we talk separately.
We take out the Internet wire, which was previously inserted directly into the computer, and connect it to the router port, which is marked as WAN. Often it has a color that is different from others. About what to do if the wire is not detected in the router, read separately.
Next, we take an Ethernet cable with two free ends from the router box. We insert one side into the network connector of the PC. To where the wire from the provider used to go, which you were taken to the apartment when connecting to the Internet. It is located on the back of the computer. On a laptop, you need to look for it from the back or side
The other end is connected to any of several LAN ports on the router. They are indicated by numbers and are also often marked in one single color.
Installing a TP-Link Router via Cable
Next, you need to make the appropriate settings on the computer so that it connects to the router. To do this, on Windows, go along the “route”
“Start. Control Panel. Network and Internet. Network and Sharing Center. Network Connection Management. Change adapter settings.” Here we see “Local Area Connection”. We click on it with the right mouse button, go to “Properties” and open the “Internet Protocol Version 4”.
If something is written here, then carefully rewrite it on paper, and then put a checkmark on “Get IP address” and “Get DNS server”. AUTOMATICALLY
We save all the parameters.
How to connect a TP-Link router to a laptop via WiFi?
Often, it is not possible to connect the router to the laptop via cable, since the latter does not have a corresponding connector on the case. But this is not a problem, since all modern TP-Link routers have the ability to do this via WiFi. As soon as you plug it into the network, it will begin to distribute a wireless network with a name like “TP-LINK_XXX”, which is open for connection.
But first, you need to, as in the first case, go to “Change adapter settings”, only this time select “Wireless network connection” for editing
And just put the flags on the “machine”.
After that, we connect to this TP-Link wireless network. In newer versions, it happens that it is still password protected (PIN). If so, then you can find it on the sticker on the case.
How to connect TP-Link router on a computer without a disk?
The easiest option for further action is to open a browser and enter the ip address at which the router admin interface is located. TP-Link in most cases is 192.168.0.1, but in some models it also has 192.168.1.1. This can be clarified on the sticker located at the bottom of the device. A login with a password for entry is also located there.
Once you got into the control panel, just start the wizard to quickly configure and step through the entire process of connecting to the Internet:
- Select connection type
- Enter authorization data
- Set up wifi network
You can read more about installing TP-Link router without a disk through a browser on a computer or laptop in articles about