How to connect to a sony speaker

How to connect a Bluetooth speaker to your phone. Very simple instructions and all the ways

Bluetooth (Bluetooth) is a wireless technology that allows two or more devices to be connected over a short distance. Whereas in the past this communication method was mainly used to exchange data between two mobile phones, today Bluetooth is used to connect a smartphone and a wireless accessory.

How To Pair Sony XB41 XB31 & XB21 To The Older Sony XB40 XB30 or Sony XB20

Bluetooth connects a wireless headset, headphones, smart watches, pedometers or wireless speakers. Here Bluetooth has a lot of appeal as the connection is simple and the signal range is sufficient up to 10m, which is enough.

How to connect Sony SRS-XB21 bluetooth speaker to Iphone 7 plus

connect, sony, speaker

When you disconnect due to the distance between devices, most gadgets will automatically reconnect after getting close.

Enabling Bluetooth on your smartphone is simple. On the notification bar, tap the Bluetooth icon to activate it and then hold it to configure (but this may not work on some gadgets).

You can access additional settings from the menu “Phone”. “Settings”. “Wireless networks”. “Bluetooth”.

An important concept of Bluetooth technology is “Visibility”, which determines whether the phone is visible to other devices (whether it appears in the list of available).

Visibility can only be enabled temporarily to connect to another gadget. Once the devices are connected to each other, visibility is optional. Conversely, it is recommended to turn off visibility if you do not plan to connect to a new gadget.

The NFC function is a wireless technology that allows wireless communication between devices such as smartphones or smart gadgets over a short distance. NFC makes it easy to set up data exchange.

Connecting to a Samsung phone

  • Connecting a Bluetooth speaker to a Samsung phone is simple. Consider the example of Samsung Galaxy.
  • Open Bluetooth settings. Make sure your smartphone and your JBL wireless speaker are paired.
  • Tap on the speaker name on your smartphone to activate the pop-up menu. Open the “parameters” section.
  • Instead of the “phone” profile, select the “multimedia” profile.
  • Click the “connect” button and wait for the green check mark to appear, which indicates that your JBL speaker is connected.

Wired connection

If your speaker has a 3.5mm mini jack, then you’re in luck. If available, the sound quality will depend only on the implementation of the speakers, and not on the stability of signal reception and the Bluetooth version. However, you should make sure that this is an entrance and not an exit. This can be done in two ways:

  • Look at the speaker case or in the instruction manual. the word “AUX” should appear near the 3.5 mm jack. This means that it is for connecting an audio cable.
  • Try connecting headphones to the sounding speakers. If music starts playing in them, then this is an exit, not an entrance. If there is no effect, then this is an audio input. How to make the speaker play without connecting to a smartphone? Insert a memory card with music, or activate the radio. Of course, if only the portable speaker has these functions.

When using a cable, you are somewhat limited in the movement of the speaker. it will have to be moved along with the phone. But on the other hand, the sound is transmitted through the wire in the maximum volume, without distortion and loss. And the battery charge of the smartphone will be consumed very slowly, as in the case of listening to music using headphones.

Types of Bluetooth speaker connections

To begin with, we note that there is some standardization among manufacturers of portable speakers. That is, they use several popular connection methods. Usually these are the following two ways:

  • Bluetooth connection. the so-called “blue tooth” is present in every smartphone, tablet, laptop and many mobile phones. Therefore, this method is universal. It also doesn’t require wires to trip over. But the same method is also the most energy-consuming.
  • Connecting via audio cable. recently it is used less and less. However, some manufacturers do not forget about the corresponding connector. Not without reason: it is through the wire that the sound is transmitted in the best quality.

It is extremely rare that manufacturers of wireless speakers introduce any other methods of receiving sound. For example, someone can use Wi-Fi for these purposes. But this method will not be universal, because not every device can transmit sound over Wi-Fi. Therefore, let’s leave additional methods of synchronizing the speaker and smartphone out of brackets, concentrating on the two most popular connection methods.

iPhone

Turn on the speaker and set the pairing mode. For information on how to enable pairing mode, refer to the manual that comes with your speaker.

  • On your phone, open “settings”.
  • Click “Bluetooth”.
  • Move the Bluetooth enable slider to the right.
  • You will see a list of devices that are located near the iPhone.
  • Find and click on the column name.

How to connect Sony SRS-XB31 bluetooth speaker with Iphone XR

Listen to music through your portable speaker. Sound will now play through your wireless speaker.

Connecting a wired speaker to the phone via USB and AUX

If the speakers do not have their own power source (for example, some ancient Sven speakers) and can only be powered via USB, then to connect you will need:

  • USB to mini or micro USB adapter (depending on your phone model)
  • USB cable
  • AUX. cable.
  • Insert the adapter into the phone jack, and into it the USB cable from the speakers. Connect the other end of the USB cable to the speakers themselves. Thus, the phone will be used as a power source
  • Connect devices with AUX cable.

With this method of connection, it is better to use speakers with an amplifier so that there is no extraneous noise and low-quality sound.

Connecting a speaker via an AUX cable

To connect the speaker to the phone via AUX, it is necessary that the speakers have their own power source (battery or plug for connecting to an outlet).

  • Include columns
  • Insert one end of the cable into the headphone jack on the speakers
  • Insert the other end into the 3.5mm jack on the phone

An icon or signature with the text “Audio jack is connected” should appear on the display of the mobile device.

How to connect a speaker to a phone via Bluetooth, USB and AUX

Do you want to enjoy your favorite music on your mobile device, but the volume and bass are not enough for you? Read our instructions and you will learn how to connect the speaker to the phone in three different ways:

  • Via bluetooth
  • Via USB and AUX cable (if the speakers do not have their own power supply)
  • With an AUX cable (if the speakers have their own power supply)

If you know how to connect, but you can’t do it, at the bottom of the article we have collected recommendations that can help solve the problem.

Bluetooth speaker connection

Let’s consider how to connect a Bluetooth speaker to your phone. This method is very convenient, since you do not have to use wires when connecting.

Read more:  Games For Download To Computer

In addition, unlike ordinary speakers (for example, from a computer, or a music center), Bluetooth speakers usually have a small size and stylish appearance, such as this small model from Nokia:

A big plus is also the compatibility of almost all wireless speakers and smartphones with each other, regardless of the manufacturer. For example, you can easily connect a Sony Bluetooth speaker to a Samsung phone.

Connecting Bluetooth speakers on smartphones with Android and iPhone is carried out in the same way:

  • Turn on the speaker and activate Bluetooth on it (if it does not start automatically);
  • On the phone, go to the “Settings” (or “Options”) menu;
  • Open the Bluetooth section;
  • Move the slider of the same name to the right to activate the wireless connection and start searching for available devices;
  • After the list of devices is displayed, find the name of your speaker in it and click on it within a few seconds, a connection should be made, and the speaker should make a sound or change the color of the indicator (depending on the model);
  • Try playing music on your phone. The sound should play from the speaker.

If you have a JBL speaker, read a separate instruction on how to connect a JBL speaker to your phone

By the way, almost all wireless speakers have a 3.5 mm jack, which means they can be connected via an AUX cable. The main thing is that your phone also has such a connector.

If the speaker does not connect to the phone

If the speaker does not connect to the phone via Bluetooth, or the connection is made, but the sound from the speaker does not come, then try the following recommendations:

  • Restart your phone first (it helps a lot)
  • Make sure the speaker is in Bluetooth mode correctly. Usually this can be seen by the indicator on the dynamics, but to be sure, look at the instructions.
  • Make sure there are no other Bluetooth connections (such as headphones) at the moment. The phone can only connect to one gadget at a time.
  • Some speakers have a “weak” Bluetooth module and work only in close proximity to the smartphone. To eliminate the influence of this fact, try connecting two devices at a minimum distance from each other.
  • Reset the speaker settings. It is usually done by pressing multiple buttons at the same time. The combinations vary from model to model, so see your speaker manual.
  • If the connection was made, but the sound does not go, then try to break the connection, and then, in the Bluetooth settings menu of the phone, click on the name of the speaker, and then select the “Forget this device” item. After that, search for available devices again and try to connect.
  • Try connecting your smartphone to another device. If it also does not connect to it, then most likely there is a software malfunction. In this case (if rebooting or updating the system did not help), do a factory reset on your phone.
  • If none of the above helped us, then perhaps there is a malfunction in the operation of the Bluetooh module of one of the devices. In this case, it is worth contacting specialists.

In this article, we described how to connect speakers to your phone: via Bluetooth, USB and AUX. We hope this tutorial helped you.

For more instructions on wireless speakers, see the Speakers section

Why use a portable speaker

The vast majority of laptops, in terms of sound quality, are, to put it mildly, not very good. As a rule, they are equipped with small speakers, which not only cannot play loud enough, but also hardly cope with low frequencies.

When watching a movie, this is still acceptable, but for music this quality is not suitable.

In conjunction with any portable device. laptop, netbook, tablet or smartphone, a portable speaker, equipped with a built-in battery or powered by batteries, shows itself better.

It’s easy to connect JBL or any other speaker to your laptop, no matter what OS is installed. Windows 7, Windows 10, G8 or Vista.

Almost all modern laptops are equipped with a built-in Bluetooth transmitter, with which you can also connect a mouse, keyboard, gamepad or headphones. At the same time, installation of drivers and complex manipulations with settings will not be required.

When connecting a wireless JBL to a PC, everything is a little more complicated. as a rule, there is no “blue tooth” in a desktop PC. You will have to additionally purchase a universal adapter that connects via the USB port.

Separately, it is worth noting that a similar “stray” from a wireless mouse or keyboard, most likely, will not work. it simply will not connect with the speaker, since it is designed only for connecting a “native” device.

Generally, a universal adapter is a plug-n-play device, so it will install drivers immediately after the first connection to a computer. Otherwise, you will have to install them yourself from the included disk.

How to connect to a sony speaker via bluetooth

A Bluetooth speaker is a very popular device. Such portable acoustics can be connected to almost any mobile device. Basically, they are connected to phones, or tablets. Since the sound that even an inexpensive portable speaker makes will be much better and louder compared to the built-in speakers in the phone. Everything is clear with mobile devices, but with laptops and computers. Can a Bluetooth speaker be connected to a laptop or PC? After all, the sound through the speakers built into the laptop is not much better, if not worse, than on mobile devices.

Yes, most laptops have problems with sound quality. Even expensive models. Either the sound is very quiet, the bass is not enough, then something squeaks, whistles, etc. Therefore, if you have a portable speaker (or not very portable, but with the ability to connect via Bluetooth), then you can easily connect it to your laptop and enjoy pleasant and loud sound.

The Bluetooth speaker can even be connected to a PC. As a rule, speakers are connected to a stationary computer via a cable. But if you have good wireless speakers, why not pair them via Bluetooth. However, there is one nuance. On laptops, Bluetooth is built-in, but on stationary computers (in system units), a built-in Bluetooth module is rare. Therefore, in most cases, we need a USB Bluetooth adapter to connect a wireless speaker to a PC. I wrote how to choose it in this article. After purchase, you need to connect and configure Bluetooth on your computer.

If you have a laptop, especially on Windows 10, then Bluetooth should work there without special settings, driver installation, etc. As a last resort, you need to download the Bluetooth driver from the laptop manufacturer’s website and install it. The connection process itself in Windows 10 and Windows 7 is slightly different. As in Windows 8. The easiest way, of course, is to connect a Bluetooth speaker in Windows 10. There, this process was made simple and straightforward. We will also consider the connection process using the example of Windows 7. Sometimes, after connecting, you also need to configure the sound output to the wireless speaker.

As for the wireless speaker itself, absolutely any speaker can be connected to a computer: JBL, Beats, Logitech, Sven, Rapoo, Xiaomi Mi Bluetooth Speaker, Aspiring and others.

Is it possible to connect a Bluetooth speaker and how to do it

So, it is still possible to connect a wireless speaker to a PC, we figured it out. Algorithm of actions after installing drivers on a Bluetooth dongle or after activating this module on a laptop:

There may be problems with sound output. In this case, in the “Sound” item, manually select the connected device in the input devices in the drop-down list.

In the “Device settings and application volume” menu, an option is available to output sound from different sources to different playback devices. for example, system sounds or the “croaking” of the messenger to the built-in laptop speakers, and music to a portable speaker system.

To do this, you need to change the settings by specifying the playback device for each source by selecting it in the drop-down list.

In Windows 7, pairing is much easier. the wireless icon appears in the system tray immediately after activating the Bluetooth module. After setting the speaker to pairing mode, right-click on this icon and select “Add device”.

The computer will find the speaker and automatically redirect sound to it.

Read more:  The Keyboard Does Not Work On The Sony Vayo Laptop

Bluetooth is a versatile technology used by many manufacturers. Difficulties in the operation of devices happen, but the solution can be quite simple.

Method 1

This may sound trite, but please make sure both devices have Bluetooth enabled. On your smartphone or laptop, turn off the power saving mode, and on the speaker or headphones, select the signal source. Bluetooth. Try to connect. This may be enough.

Not? Turn off Bluetooth on your smartphone or laptop, wait 3 seconds and turn it on again. this will reboot their “stuck” Bluetooth module. Wait about another 5-7 seconds and try to connect. The distance between the devices should be small (usually, no more than 10 m, but for a reliable signal. the closer the better). Be sure to check that there are no other Bluetooth devices nearby that are “familiar” (paired) with yours. it is better to turn off Bluetooth on these devices so that they do not interfere.

The wireless speaker does not work

In Windows 7, I was unable to connect a Bluetooth speaker. The system finds it, detects it as a speaker, connects it, but it does not work. There is no driver. If you open connected devices, it will be with a yellow exclamation mark. There will be an unknown, bluetooth peripheral in device manager. And during the connection process, you may notice a message that “The software for the device has not been installed.”.

I looked on the Sony website (I have a portable speaker from this manufacturer) and did not find any drivers in the Downloads section. If in the manager click on “Bluetooth peripheral device” and select “Update drivers”, then the system immediately gives out that nothing was found.

I did not download drivers from any third-party sites, or use programs to automatically install drivers. I hope you will not encounter such a problem, and your column will make friends with Windows 7. And if you know how to solve this problem, I will be grateful if you write about it in the Комментарии и мнения владельцев. In general, switch to Windows 10. It is better, and there are no such problems.

Connecting a Bluetooth speaker to a laptop on Windows 7

First, we turn on our column and put it into connection mode. By pressing the “Bluetooth” button, or the power button. As a rule, you need to press and hold for a few seconds. The Bluetooth indicator should be blinking actively.

There should be a Bluetooth icon in the tray. Right-click on it and select “Add device”.

A new window should appear in which the devices available for connection will be displayed. Our wireless speaker should be there. You must select it and click “Next”.

Next, the device will be configured, after which a window should appear with a message that the device is successfully connected and ready to work. And if the sound after connection will not be played through the wireless speaker, then you need to right-click on the sound icon in the tray, select “Playback Devices”, then right-click on the connected Bluetooth speaker and select “Use by default”. After which everything should work.

Method 2

If both devices are working and close, but the connection problem persists, try turning both devices off and on (or restarting) completely. All device systems will reboot, clearing the accumulated errors, and this may help. Usually, devices that were previously connected via Bluetooth, after a reboot, connect with each other without a test.

Three major pairing problems

Theoretically, we figured out how to connect a Bluetooth speaker to a phone. However, in practice, things are not so smooth. There is only one problem. the device does not see the equipment, but there are several recommendations for elimination:

  • trite Bluetooth is not included. Check it out. If so, move the slider to the “ON” position;
  • the column is discharged. It is also very easy to check: we change the batteries or connect to the network;
  • the equipment has already been connected to another device. The first connection is made automatically, and after that the basic data is saved in the column settings. If your equipment has already been in operation, then it is worth paying attention to this. Reset the device and try to reconnect.

We hope that the article was helpful and you fixed the problem when Bluetooth does not see the speaker. Now you can fully use the new equipment and experience all the delights of sound technology.

Hello dear readers! Wireless speakers are gaining more and more popularity due to their ease of use and practicality: you can connect such a device to any source that can transmit a signal via Bluetooth, they are easy to transport and do not take up much space, but at the same time they often sound of acceptable quality.

In today’s post, we will analyze how to connect a Bluetooth speaker to a computer.

Wired connection

If your speaker has a 3.5mm mini jack, then you’re in luck. If available, the sound quality will depend only on the implementation of the speakers, and not on the stability of signal reception and the Bluetooth version. However, you should make sure that this is an entrance and not an exit. This can be done in two ways:

  • Look at the speaker case or in the instruction manual. the word “AUX” should appear near the 3.5 mm jack. This means that it is for connecting an audio cable.
  • Try connecting headphones to the sounding speakers. If music starts playing in them, then this is an exit, not an entrance. If there is no effect, then this is an audio input. How to make the speaker play without connecting to a smartphone? Insert a memory card with music, or activate the radio. Of course, if only the portable speaker has these functions.

When using a cable, you are somewhat limited in the movement of the speaker. it will have to be moved along with the phone. But on the other hand, the sound is transmitted through the wire in the maximum volume, without distortion and loss. And the battery charge of the smartphone will be consumed very slowly, as in the case of listening to music using headphones.

Types of Bluetooth speaker connections

To begin with, we note that there is some standardization among manufacturers of portable speakers. That is, they use several popular connection methods. Usually these are the following two ways:

  • Bluetooth connection. the so-called “blue tooth” is present in every smartphone, tablet, laptop and many mobile phones. Therefore, this method is universal. It also doesn’t require wires to trip over. But the same method is also the most energy-consuming.
  • Connecting via audio cable. recently it is used less and less. However, some manufacturers do not forget about the corresponding connector. Not without reason: it is through the wire that the sound is transmitted in the best quality.

It is extremely rare that manufacturers of wireless speakers introduce any other methods of receiving sound. For example, someone can use Wi-Fi for these purposes. But this method will not be universal, because not every device can transmit sound over Wi-Fi. Therefore, let’s leave additional methods of synchronizing the speaker and smartphone out of brackets, concentrating on the two most popular connection methods.

Summarizing

Many owners of wireless speakers are thinking about which type of connection is more convenient. We think it’s better to use Bluetooth. But remember that sound is transmitted over the air in compressed form, unless the speaker with a smartphone supports the AptX profile. However, portable speakers are often compact, and therefore physically unable to reproduce sound in maximum quality. Therefore, we advise you not to worry about using the wireless method to connect.

How long have you been using a portable speaker? Are you satisfied with its sound? And have you encountered any connection problems? We wish to read your opinion in the Комментарии и мнения владельцев.

Why doesn’t the Bluetooth speaker connect to the phone?. this is the first question that follows after purchasing the device. Joy very quickly gives way to bewilderment. Manufacturers now offer a wide range of smartphone-pairing accessories. And at this stage, a number of problems arise, one of which is how to connect a Bluetooth speaker to the phone?

The most common pairing option

How to connect a speaker via Bluetooth to a phone? Such an opportunity exists in every smartphone, tablet or laptop. That is why the method is universal and does not require additional wires. However, the battery consumption rate is several times higher than with standard methods.

Read more:  Has Been Poor Internet Work On Phone

The Bluetooth version is irrelevant for the connection, but may affect the range or power consumption. The procedure is easy to perform when the device is equipped with an NFC chip. It is enough to attach the speaker to the smartphone to carry out the settings and transfer.

If there is no chip, then you need to enter the properties manually. Enough:

  • enable, then a notification will appear in the notification panel on the smartphone;
  • go to the Bluetooth section. Further “Settings”;
  • activate the Bluetooth channel and click “Search”;
  • we find and select speakers among the devices;
  • waiting for successful pairing.

Such manipulations need to be done only for the first time. However, even he may fail.

How to connect a portable speaker via USB

  • install a USB cable in the connectors of the phone and speakers;
  • connect the AUX cable.

In this case, the sound quality will be optimal (there is no transmission loss through the Bluetooth channel). You can also use amplified speakers to get rid of extraneous noise.

How a portable speaker works

The creation of portable speakers can be attributed to the beginning of 2000. Then the first who were engaged in the production of such equipment was Sony Ericsson Walkman. Naturally, the assortment did not imply a huge selection and not everyone could afford such a toy. Naturally, everyone was interested in how the Bluetooth speaker works. Today they are universal for all devices, which is why they are so widespread. The devices differ not only in functionality, but also in design, sound and other parameters that add up to the final price.

The speaker is a portable speaker system. Several speakers may be located inside the equipment. The connection to the device is made via a wireless Bluetooth channel, but sometimes Bluetooth does not see the speaker. The lack of additional wires has greatly increased the popularity of the product. Sound quality is as good as conventional wireless accessories, while still achieving portability. Naturally, you need batteries or a rechargeable battery to work. Now it is clear how to use a Bluetooth speaker?

Why use a portable speaker

The vast majority of laptops, in terms of sound quality, are, to put it mildly, not very good. As a rule, they are equipped with small speakers, which not only cannot play loud enough, but also hardly cope with low frequencies.

When watching a movie, this is still acceptable, but for music this quality is not suitable.

In conjunction with any portable device. laptop, netbook, tablet or smartphone, a portable speaker, equipped with a built-in battery or powered by batteries, shows itself better.

It’s easy to connect JBL or any other speaker to your laptop, no matter what OS is installed. Windows 7, Windows 10, G8 or Vista.

Almost all modern laptops are equipped with a built-in Bluetooth transmitter, with which you can also connect a mouse, keyboard, gamepad or headphones. At the same time, installation of drivers and complex manipulations with settings will not be required.

When connecting a wireless JBL to a PC, everything is a little more complicated. as a rule, there is no “blue tooth” in a desktop PC. You will have to additionally purchase a universal adapter that connects via the USB port.

Separately, it is worth noting that a similar “stray” from a wireless mouse or keyboard, most likely, will not work. it simply will not connect with the speaker, since it is designed only for connecting a “native” device.

Generally, a universal adapter is a plug-n-play device, so it will install drivers immediately after connecting to a computer for the first time. Otherwise, you will have to install them yourself from the included disk.

How to connect?

Most modern smartphones run on the Android operating system. It is also used for tablets and other popular devices. Consider the connection diagram of a portable speaker to an Android mobile phone.

To connect to a speaker, follow these steps.

  • Start your acoustic device.
  • On the smartphone, you need to open the notification panel and activate the operation of the wireless module.
  • Turn on Bluetooth on your speaker. As a rule, a separate button with the image of a characteristic symbol is provided for this.
  • Search for images on your smartphone. As soon as the name of the column appears in the list, you need to select it by clicking on the label once.
  • After a few seconds, the devices will be paired. Now acoustics can be used to listen to music.

If the phone cannot find the speaker, make sure the wireless adapter is working. To start it, in most models, you need to press the corresponding button and hold it for a few seconds.

A flashing indicator light will notify the user that the gadget is ready for pairing.

Connecting the speaker to a Samsung phone

Combining a portable speaker with a Samsung smartphone is very easy. Even novice users will not face problems if you follow a certain sequence.

Let’s consider the synchronization process using the example of a Samsung Galaxy model and a speaker from the popular American manufacturer JB.

  • Go to Bluetooth settings on your phone. You need to make sure that the smartphone is paired with an acoustic gadget (paired). To do this, the speaker must be turned on, and the wireless module must be active.
  • Click once on the column name. As a result, the pop-up menu is activated.
  • Go to the “Parameters” section. You need to change the profile “phone” to “multimedia”.
  • Then you need to press the button labeled “Connect”.
  • As soon as a green checkmark appears, the gadgets can be used.

Wireless pairing

To use this option, the acoustics must have a Wi-Fi or Bluetooth module. To date, models equipped with the second option are widely used. Only expensive acoustics models have the ability to connect via wireless Internet.

The pairing process is simple and takes about a minute. When using the Bluetooth protocol, the speaker should be at the optimal distance from the smartphone. All modern phones are equipped with the necessary module.

To successfully pair, the following conditions must be met:

  • the paired equipment must have an active wireless module;
  • both devices must be put into connection mode;
  • gadgets must be visible (for this you need to put the equipment into pairing mode and check the settings).

How to connect to a speaker?

Modern brands offer customers a wide variety of compact, portable and functional speakers that can be connected to various equipment. Most often, such acoustics are connected to smartphones, which allows you to listen to your favorite music at high volume, enjoying clear and surround sound.

Connection types

How to connect to a speaker from a laptop?

Practical and mobile speakers are often paired not only with smartphones, but also with laptops. Before connecting, you need to check if the Bluetooth module is installed in the computer device. You can find information in the technical specification for the laptop.

You should also check for the presence of a shortcut key. Manufacturers designate it with a special symbol.

If it is not there, you need to do the following.

  • Run the command line, this is done using the WinR keys. In the menu that opens, you need to register the devmgmt command. msc.
  • The second option is to open the “Control Panel” and go to the section called “Device Manager”. There you can find information about the availability of modules, as well as enable or disable them if necessary.
  • In the window that opens, to connect a wireless speaker to a laptop, double-click on this item with the left mouse button.
  • In the Properties section, enable the module. A new icon will appear in the tray.
  • You need to right-click on the icon that appears and select “Add device”. After that, a search for suitable gadgets for pairing will occur.
  • As soon as the search comes to an end, you need to click on the name of the column, and it will connect to the computer.

Note: The described diagram is generalized, and the connection process may differ depending on the laptop or speaker model. In case of problems, carefully read the instructions for use.