How to connect to a Samsung TV

Samsung

Automatic

To quickly connect the universal remote to your Samsung TV, and follow the guide:

  • enter the combination 9999 on the remote control and after the fourth pressing of the nine, hold down the key;
  • then wait until it turns off completely and turn on the TV again;
  • direct the source of control to him;
  • press the power key, and hold this key;
  • when the volume icon appears on the screen, click to increase or decrease the sound level;
  • if there is a reaction, then the setting was successful.

If you don’t get the result, try repeating the action a few more times.

Manual

connect, samsung

If you have any questions or complaints. please let us know

The manual method is more time consuming, because you have to wait for the indicator to work and specify some parameters;

  • turn on TV;
  • simultaneously hold down the “C” and “Setup” keys;
  • release after about 5-7 seconds when the indicator light responds;
  • enter the code in the window that opens (you can find it in the instructions)
  • confirm the action;
  • test the performance, check with the volume keys.

How to set up a universal remote control for a Samsung TV: codes, instructions

How to set up a universal remote for a Samsung TV? The universal control element is increasingly used for contact with home appliances, as it is simple to set up and easy to replace in case of loss or breakdown. However, not all users know how to debug, and what to do to start working with TV. This article provides not only a guide, but also an alternative way to control the technique.

How to connect PC with Samsung TV

No code

There is only one option for pairing without code. automatic debugging. It is also possible to use an alternative source. a smartphone. Benefits of smartphone control:

  • fast connection;
  • no password required;
  • multifunctionality. it is allowed to configure it to several TVs and other devices at once;
  • is available on almost all phones.

How to find the TV code

To find the Samsung TV code for the universal remote control, you should look at the instructions (paper or electronic version on the manufacturer’s website). It is also possible by the selection method to enter general combinations 0021.0061.0151.0291.0301.0331.0391.0661.1021.0931.1391.1401.1571.1081.2511.

For each model, these combinations are different, so you need to clarify on the official resources of the manufacturer.

Setting up a universal TV remote control for Samsung TV

Debugging can be automatic or manual. If the user wants to establish contact without a code, then the automatic method should be chosen.

  • Automatic. quickly starts scanning and automatically detects the contact. The advantage is that you do not need to search for a pairing combination and enter something manually.
  • Manual. for manual pairing, you will need to specify some parameters.

Smartphones with universal remote function

This is a special pre-installed software that almost every smartphone owner has. It works through an infrared port, which connects to equipment. In just two clicks, a connection is established and the signal is tested.

How to connect a laptop to a TV via Wi-Fi

Connecting a laptop to a TV via Wi-Fi wirelessly is a cherished dream of all online movie theater lovers and gamers. We will tell you how to do it quickly and without complicated settings.

Oddly enough, but not many people know that you can connect a laptop to a TV without wires in just a couple of mouse clicks. This will allow you to sit on the couch and broadcast your vacation photos or video to the big screen. You can also play your favorite games using not a small laptop display, but display the picture on a device with a huge diagonal. However, in the latter case, it is worth considering that the picture will be broadcast to the TV with a slight delay. When watching movies and photos, you will not notice this. Below we will give step-by-step instructions on how to connect a laptop to a TV via WI-FI.

Connecting to a TV via Wi-Fi Direct

This feature works well on modern TVs from the 5th generation, where manufacturers have already implemented unified wireless direct drivers. This is the so-called. connecting a second wireless monitor, where the TV acts as an external display device for everything that happens on the screen of your mobile device, such as a laptop or smartphone.

In the first case, you need to have Windows 7, 8 or 10. A home network is not required with this connection, and authentication and connection is carried out through a connection request on the TV screen itself.

Such a connection is convenient because you can see on the big screen everything that is done on the screen of your PC or laptop, including working in the browser, viewing photos or videos, as well as the process of playing. The only drawback here is a slight delay in displaying content on TV and slightly fewer colors than on a PC display.

How to connect a laptop to a TV via WI-FI? Making a Wi-Fi Direct connection is pretty straightforward. To do this, turn on your TV and laptop. Wi-Fi adapters must be activated on both devices.

Now on your Windows 10 laptop go to Start | Parameters | System | Display ”and on the right side under“ Multiple displays ”click on“ Connect to a wireless display ”. A vertical shutter with the “connect” menu and a list of detected devices will appear on the right side. In our case, this is Samsung 6 series (49). Click on the selected model, then on the TV itself, agree to the connection request. It should be noted that the connection may not occur on the first or even on the second attempt, since the computer needs time to transmit the TV signal encryption keys. But after the TV is connected to the laptop via WI-FI, you can broadcast the video even from another room.

In order to disable the transmission of the wireless video signal to the TV, click on “Connect to wireless display” again and in the right curtain of the menu click on the “Disconnect” button.

What you need to connect a laptop to TV via Wi-Fi

Many people ask the question: how to connect a laptop to a TV via WI-FI? The main condition for the possibility of such a connection is the presence in the TV itself of Smart TV technology and a Wi-Fi module with support for Wi-Fi Direct and DLNA functions. The first allows you to connect a laptop to a TV directly, without using a home network and a router. However, not all TVs (especially older models) can be connected to laptops in this way. The second technology. DLNA, makes it possible to go from the TV itself to the network storage (for example, a folder on the hard drive of a PC connected to a home network) and start playing multimedia content from it. viewing a photo or video. You can also launch a media server from the laptop itself with broadcast to the TV.

The difference between these two connection methods is quite significant and below we will tell you what is the difference and how to organize such connections and how to connect a laptop to a TV via WI-FI.

Connecting to a TV via DLNA

This type of connection is that on a computer or laptop that is part of the home network, access is organized to certain folders where you place multimedia files. photos and videos. Only your TV can play them with its built-in player. A prerequisite for this is that the TV supports DLNA technology. a set of standards that allow devices connected to a home network to transmit and receive over various media content.

This can be done both from an Android smartphone and tablet, as well as from a TV (playback functions only). The question also arises of how to synchronize a laptop with a TV via WI-FI. In general, everything happens automatically.

The main task is to organize a shared folder on a laptop. To do this, you need to make it available to other devices on your home network, and also assign permanent IP addresses in the router for gadgets connected to the network. This is necessary so that the TV does not have to scan the network every time in search of this folder.

To do this, on the laptop’s hard drive, create a shared folder named in English, for example, MediaTV. Go to the “Access” tab in its properties. Then click “Advanced settings”, put a tick next to the phrase “Open public access” and confirm the action by clicking “OK”.

If your TV with Smart TV is an old model and its system does not allow connecting to devices on Windows OS, namely, the TV simply does not see the shared folder with files, there is another option to organize the broadcast of media content on its screen. But first you need to make sure that your TV is visible on your home network.

To do this, click on the “Network” icon in the Explorer on the left. After that, the devices available on the network are displayed in the right pane. Now select a video file in MP4 format in any folder, right-click on it and select “Transfer to device” in the context menu, in our case to Samsung.

This will launch the Windows media server, displaying a list of files being transferred to the TV. Don’t miss the request on the TV itself to play a file from an external source.

Connecting using Wi-Fi adapters

If you failed to connect the laptop to the TV via Wi-Fi, but this method remains preferable for you, as compared with the HDMI connection, you can try to connect the laptop to the TV using an intermediary. a TV set-top box on Android or a Wi-Fi dongle. for example Google Chromecast. In this case, you just need to connect to the Wi-Fi network organized by this adapter and broadcast the signal to it.

Samsung Smart TV: How to Connect to Internet WiFi (Wireless or Wired)

However, such an extravagant solution will be justified if cable connection is almost impossible, such as for a video projector suspended from the ceiling. It is much cheaper and more reliable to use an HDMI connection and connect the laptop to the TV through the appropriate cable.

Entering the MAC address

In addition to manually setting television parameters, it is recommended to refer to the settings of the router and enter an individual MAC address not only for the TV, but also for other devices connected to the router.

Connection speed control

Data rate drops can be caused by:

  • insufficient functional potential of the router (router replacement will be required);
  • heavy load of the transmission channel (several devices are involved);
  • the terms of the provider’s tariff plan (it is recommended to switch to a faster one).

TV. router

Here you need to re-configure the Smart-TV:

  • we activate the “IP” button, select the manual input of parameters and indicate the properties of the router (the information is reflected on the device case);
  • save the Ethernet connection;
  • testing the created connection.

If errors are detected during testing, it is recommended to delete the old information about the router from the TV’s memory and re-activate the connection setup.

Eliminate interference that affects signal quality

Obstacles in the form of many concrete partitions and furniture negatively affect the quality of the connection. To maintain a stable transmission rate and to avoid intermittent communication breaks when working on the network, it is recommended to reduce the distance between devices.

How to connect an N, M, Q or LS series TV to the Internet

To connect to Wi-Fi, you must know the name of the network and the password for it. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu: press the “Home” button and select “Settings” on the TV screen.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter the password from the network and click “Done”. To see what password you have entered, check the box “Show. password”.

Wait for the TV to check the password and click “OK”.

Reboot equipment

It is often a simple reboot to eliminate the reasons that prevent the connection. Here it is suggested to turn off the router with TV for two minutes and resume the setup procedure when the devices are turned on.

What you need to know?

In the process of preparing Smart TV for connection, it is recommended to clarify a number of criteria that will determine how to set up the Internet on a Samsung TV.

  • The presence (absence) of a built-in Wi-Fi adapter. If there is no such module, you will need to ensure its availability and connect via USB (synchronization with the television system will occur automatically).

Watch a video review of an inexpensive Samsung TV network adapter:

It should be borne in mind that when choosing an adapter, you must take into account the TV model, since the compatibility of devices is determined individually.

  • Wi-Fi connection parameters. Here you should take into account the terms of the provider’s tariff plan, signal quality, router functionality, etc. If you plan to view previously downloaded media content (to a computer), it is enough to use WI-FI-D technology This method involves synchronizing the TV with a PC, duplicating the contents of the computer monitor and subsequent viewing of content on the big screen.

Direct activation excludes the possibility of using Smart TV as a device for Internet access and does not allow working with applications. No router is required with this method.

How to connect a K-series TV to the Internet

To connect to Wi-Fi, you must know the name of the network and the password for it. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu. Depending on the model of the remote control: press the “Menu” button

or press the “Home” button and select “Settings” on the TV screen.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter the password from the network and click “Done”. To see what password you have entered, check the box “Show. password”.

Wait for the TV to check the password and click “OK”.

How to connect PC to Samsung Smart TV via:

We can connect a computer to a TV in two main ways: wireless and wired. The advantage of the first is ease of use, since there is no need to buy a cable and conduct it. But in the wired version, the signal is more stable and reaches the TV faster. If response time is important, we recommend that you prefer this option.

How to Connect iPhone to Samsung Smart TV (Wireless)

All modern TVs from Samsung support DLNA, which makes it possible to set up PC synchronization with the TV. Of the necessary tools for the implementation of the idea: the All Share application (it is already preinstalled on the TV) and a high-quality Wi-Fi network.

How to connect Samsung Smart TV to computer via Wi-Fi:

  • Right-click (RMB) on the connection and go to “Network Control Center”.
  • Select additional parameters from the left menu.
  • We activate the sections “Enable Network Discovery” and “Enable Sharing”.
  • Click on the button “Save changes”.
  • Installing the All Share application.
  • We launch it and register the device (button on the main screen).
  • Turn on the TV and press the “Smart Hub” remote control button.
  • Launch the AllShare Play application (it should be available on the home screen).
  • Select a file from a computer or switch to wireless screen mode.

Important! All Share is currently not actively supported on PC, so it is appropriate to use alternative programs for creating DLNA servers. Here are some good options: Home Media Server, Plex. Serviio.

Another proprietary application has similar functions. Smart View. With its help, we can transfer the image from the work screen to the TV, as well as control TV from mobile devices.

This is a simpler in concept, but difficult to implement method, how to connect Samsung Smart TV to a computer. All there is to it. connect TV to PC via HDMI cable.

Tips on how to connect your computer to Smart TV:

  • The computer must have a free HDMI slot. Not all PCs have an additional port, if there is only one and you also need to connect a monitor, you will have to constantly rearrange the cables, which is very inconvenient.
  • Make sure the computer can handle image processing. The disadvantage of this method is that work with a picture is performed on a PC, and a ready signal comes to the TV. Thus, the TV hardware is practically not used, and the computer works under greater load.
  • A cable connection is inconvenient for a TV set in another room. Better to use the wireless option.
  • It is better not to buy a cable longer than 5-10 m, as the signal may be lost.

How to connect a computer to a Samsung Smart TV?

A television can perform many more functions than broadcasting TV channels. One of the possible modes of operation is as a device for duplicating an image from a computer. This will allow you to quickly turn on any movie from the Internet, hard drive and simply display the picture from the monitor, improving the user’s gaming experience. There are many more situations for synchronizing TV with a PC, but our material is not devoted to researching the reasons, but how to connect a computer to a Samsung Smart TV.

Smart TV control from a computer

The control method depends on how you connect your Samsung Smart TV to your computer. If we are talking about a wired connection, then all data from the PC monitor is automatically transmitted to the TV (if the playback mode is HDMI). In the case of a wireless connection, the algorithm is slightly different.

How to play a file on a TV from a computer:

  • We open the program in which the DNLA server was created.
  • Select the folder where movies or videos are stored.
  • Click RMB on a file of a suitable format and select “Play on”.
  • We indicate the TV, which should have previously been synchronized with the PC.

What is All Samsung TV?

We have already mentioned the All Share application, but now we will only tell you more about its functionality. The main task of the program is to provide easy interaction between smartphones, tablets, computers and TV. With its help, we can play video on a large screen, as well as include music. File exchange between a number of devices is also available.

The TV does not see the computer, what to do?

The question is how to connect Smart TV to a computer. there are pitfalls that can interfere with synchronization.

  • If a wired connection is established, we check the health of the cable and connector on the computer.
  • Switch the TV to HDMI playback mode. In the “Source” section, set “HDMI”, the option can also be moved to the main screen or available using the button on the remote control “Source”.
  • Updating drivers for your computer.
  • Install another DNLA server. Replacing a program often helps.

Unfortunately, sometimes the program for transferring the picture gets update curves that prevent communication between the PC and TV. For example, the crooked update from March 3, 2020 to Samsung Smart View broke many functions, including the detection of external devices.

Connecting a TV to a computer is not a difficult task, but you also need to figure it out, otherwise it is easy to make a mistake. We have shown the main methods for transferring images that really work and do not require unnecessary adjustment manipulations. The reader only needs to choose a wired or wireless connection option.