How to connect the redmi AirDots headphones to your phone

How to connect to your phone

To connect the headphone to the phone yourself, you should refer to the Xiaomi AirDots Pro manual. First of all, you need to start the pairing mode by pressing on the touchpad, which is located on the front side of the gadget. After the white indication appears, you can proceed to pairing.

The rest of the actions are performed on the smartphone. In the Bluetooth settings, select device search. The wireless headset will be displayed under Mi AirDots Basic_R number. Next, you need to tap on the name and wait for pairing.

Right earpiece is considered the primary earpiece, so your phone is initially tied to it. The user can switch between them and control each one separately. In case of difficulties the manual of Xiaomi AirDots Pro in Russian will help.

Headset control

There are two gestures available in total: single and double tap. One touch starts or pauses music; answers/rejects call during call. Double calls the voice assistant. Xiao AI, Siri, Google Assistant, or turn off/on the microphone. Volume control and audio switching is not possible without phone.

If the physical control does not suit you, look at a similar gadget from Xiaomi, where there is a touch panel.

The wireless headset also comes with a special box for them, instructions and spare ear cushions. The device is charged and stored in it. However, the user will not see the charging cable itself in the box. It is assumed that you need to use the wire that comes with the phone with a Micro USB connector. This is not very convenient for Samsung and iPhone owners who only have USB-C or Lighting. So, you should also take care of buying a charging cable.

As for the characteristics of the headphones, they are presented in the table below.

Characteristics	Parameter
Box size, mm	624027,2
The size of the headset, mm	26,6516,421,6
Weight of headphones, g	4,1
Weight of the case with the device, g	35,4
The headset battery capacity, mAh	40
Box battery capacity, mAh	300
Max operating time, h	4
Maximum standby time, h	150
Charging time of the device, h	1,5
Box recharging time, h	2
Type of connection used	Bluetooth 5.0
Allowable distance, m	Up to 10

The box itself is made of matte plastic, which adds an advantage to the appearance of the device. This also applies to the headphones themselves. But the latter have a glossy trim. The lid of the box is quite movable, but it is not easy to open, this is due to the magnets installed.

The modules are held together by magnets in the same way. They are deep in the box, so it takes time to get used to quickly get them out of there.

To switch music, change volume and other controls, there’s a touch pad. There is also a light indicator, which is displayed in white and red.

Regarding the distance that you can take the headphones from the source, the documentation talks about 10 meters. This is the standard distance for a type of connection like Bluetooth. However, it is worth keeping in mind all the interference, so the distance will actually be a little less. You can go into the next room, but further the signal will start to interrupt.

The headphones sound quite good. But many users observe a lack of bass. So we have to additionally adjust the sound with the equalizer. This is not really convenient if the player is not designed for such settings.

Instructions for using wireless headphones Xiaomi AirDots

To disconnect the device, you need to put it in the charging box. When it is there, synchronization with the phone stops, and when you take it out. it resumes. The signal always goes through the right earpiece, so if you put it in the case, it will turn off the whole system. If you remove the left one, the sound will continue to go through the right earpiece.

The additional functionality is controlled as follows:

• Single touch. receiving or pausing a call;
• double-tap to call the voice assistant (Alice, etc.).п.);
• holding. call reset;
• double-tap during a call. mute the microphone.

For more information on operating the device, please refer to the instruction manual that came with it. Mastering the functionality does not cause much difficulty even for beginners, but it may take a long time. Provided that the owner of the gadget has never used wireless headphones Xiaomi and only recently purchased (or going to buy) this product Xiaomi.

Each of the earpads of the headset has a touchpad. It is located on the outside and helps manage the playlist, settings and multimedia.

To sync the Xiaomi AirDots headphones and your smartphone, follow these steps:

• Touch the tabs on the earmolds and hold your fingers down until the purple light flashes. This is how you reset your device.
• Place them in a case for mutual synchronization, and immediately after that take them back. The right one will blink in pale purple.
• On your smartphone, start a device search in the Bluetooth manager.
• Find the right insert in the list, it is labeled as Mi AirDots BASIC_R. Synchronization with the left is automatic.

If done correctly, the headset will work normally.

Packaging and equipment

The box Redmi AirDots cheap, like all the latest devices Xiaomi. And it’s not just about the cardboard material, but the design is really lame. Before, when they made just a white Apple-style box, it looked a lot more presentable.

But never mind, in the end we’ll just throw it away after unpacking it, so that’s not the most important thing. I’ll give the seller a big plus for the packaging. The headphones were not just packed in a bag, but also in an impenetrable polyethylene armor, resulting in a box not damaged a bit. So you can safely take as a gift.

Inside we find 50% of useful things and the same amount of air, brought from China. That is, the box could safely be made two times smaller. Or at least put a cable in it alas, it is not here. over, for charging we need a wire with micro USB connector and it is supposed that you have to take it from your phone. And if you have an iPhone with Lightning or flagship Android with USB-C? In general, this point is not thought out.

In the set is only a set of spare ear cushions and worthless instructions in Chinese. Ok, we are done with minuses, further we will have only positive emotions.

The sound quality in headphones Xiaomi Redmi AirDots 3

A significant innovation was the support for aptX codec. If we talk about general impressions, they are positive (if we remember that the price of Xiaomi Redmi AirDots 3 is about 40). The frequencies are balanced, so the sound is pleasant. Bass is deep enough. Volume reserve is sufficient. However there is a nuance. in order to achieve that very balance, I had to tinker a lot with the equalizer settings. The default sound is worse than it could be without additional settings.

We have already talked about interruptions. They are not. Largely due to the use of Bluetooth 5.2. This makes listening to music and watching videos enjoyable in every way. Especially since the sound is not delayed. Problems in this regard is only with games.

Microphone in Xiaomi Redmi AirDots 3 TWS is pretty weak. Good audibility will be only if the sound is recorded in a quiet place. If you are on the street (especially in a busy place), then you should not expect any special recording quality.

• Turn on Bluetooth on your smartphone through the item with the same name or in the notification bar.
• Remove the headset from the case. Simultaneously clamp the two panels and hold for a couple of seconds until the white flashing light appears.
• The dots connect to each other. If this does not happen, try turning them on separately.
• Go into Bluetooth and look for “AirDots BASIC_R” there. If it is “L”, it means that only the left earphone is connected and it will sound.
• Allow the contact exchange and enter the password consisting of four zeros, when prompted by the system.
• Enjoy listening to music or chatting with friends or family.

The procedure may seem to be multistep and delayed, but it is only at first connection. Then you only need to activate Bluetooth, and the AirDots will connect automatically.

Before you connect the Redmi Dots to another phone, be sure to remove it from your current smartphone. It is desirable to clear the application cache and reset the gadget to the factory state.

How to connect Redmi Airdots TWS with iphone 11

What is needed to connect to the computer

You need either 2 to connect the wireless headphones.4Ghz channel or bluetooth connection. Models with the first connection method are expensive, and they’re usually full-size options, not walk-around plugs. AIRDOTS are connected via Bluetooth, for which the technique, to which they need to be connected, must have the appropriate module. It’s in all smartphones, tablets, laptops. Bluetooth is rarely installed in full-featured home computers and only in expensive motherboard models.

The problem can be solved with the help of a Bluetooth adapter. a small device connected via USB. You can plug it into the socket on the back of your PC to keep it out of the way.