How to connect speakers to a Samsung TV

Sound Projector. Home Acoustics | Soundbar | Device overview

Sound projectors (soundbars) have sufficient sound quality, so they can be used as an alternative to a speaker system with several satellites (speakers).

This variant of the speaker system will help save space, since the soundbars are a one-piece panel in which the speakers are integrated. The sound projection is designed to produce very high quality surround sound that rivals more expensive 5.1 speaker systems.

Modern sound projectors can be built from 4 to 16 speakers (there are more) and with the help of special electronic methods (phase shift of audio signals and delay of signals of the rear channels), a surround sound effect is created, it becomes possible to simultaneously emit and focus the sound of a large number of channels. You will really hear “surround” sound, despite the fact that its source is a flat soundbar, but even the best soundbars will not be able to simulate the sound source behind the user’s back, so only 5.1 or 7.1 acoustics can reproduce the surround sound effect with 100% accuracy.

Differences between the active and passive model

Before you find out the answer to this question, it is worth figuring out what types of subwoofers exist, and what is the difference in the way they are connected. In relation to the power amplifier, low frequency radiators are divided into:

The active one has a built-in power amplifier in the kit, which allows you to remove the output load when playing low-frequency sounds. Most models are equipped with a crossover to make it easy to synchronize audio material with your speakers.

How to connect old speaker with your Samsung TV. Samsung 65Q8C

The passive radiator does not have its own amplifier, which directly affects the load of the output stereo channels. Because of this, the volume of the sound and its quality are often reduced. Lack of setup panel makes subwoofer placement more time consuming.

Connecting powered speakers to a TV

They are equipped with a built-in amplifier. They are powered by a 220 volt network, because the amplifier needs additional power. Active speakers are computer models, audio systems, home theaters and stereos. They are equipped with a 3.5mm Mini Jack output. To connect, examine the connectors on TV and speakers. If there are RCA outputs (cinch) use a 2RCA cable.

You will also need a Mini Jack cable.

If there is no such connector, use the headphone input.

Viewing videos from YouTube, Yandex.Video and Odnoklassniki on Yandex.Station.

The online cinema Kinopoisk is enabled in Yandex.Stations with a Yandex.Plus subscription, but sometimes this function is not enough and here you can display videos from Yandex.Video, YouTube and Odnoklassniki (does not work on Yandex.Station mini due to the lack of HDMI output for connecting to TV / screen). To do this, open the desired view in your mobile device, click on the “send to device” or “share” icon and select Yandex.Station from the list.

It is important that the device and the station are in the same wi-fi network and connected to the same account. The same trick can be done from the Yandex.Music app, where you can send a track to Yandex.Station

By design

By design, subwoofers are of three types:

Closed subwoofers are very simple to design and have virtually no signal delay. Such devices represent a dynamic head isolated in a personal housing. The bass here turns out to be voluminous, rich, which is achieved due to the large dimensions. Such a technique is cumbersome and has considerable weight, while compact options are very expensive.

Bass reflex subwoofers, unlike closed ones, have a special hole in the housing with an isolated speaker. Thanks to this solution, the sound in this technique is more powerful and significantly louder.

Bandpass subwoofers have a two-piece enclosure. The first is a phase inverter, the second is a tightly closed box. This solution significantly narrows the frequency range, but increases the sound pressure. Basses in this kind of technique are the most powerful, but they require very fine tuning. A minor error makes the frequency range even smaller.

Quite often, subs are part of the structure of multichannel systems. This can be determined by the designation, in which in the first place the number of satellites is indicated, and in the second. the number of amplifiers. For example, 2.1 speakers consist of a pair of satellites and a subwoofer, and a 5.1 system consists of 5 satellites and a subwoofer.

Possible problems and solutions

There are times when it is not possible to connect acoustic devices to a TV receiver, or the sound is reproduced in an unsatisfactory quality. Then you can try to solve the problem in several ways.

• If after connecting the acoustics to the TV, there is no sound, you need to refer to the settings of the TV receiver in accordance with the user manual. Typically, the audio is automatically switched only to the headphone jack, otherwise the output must be manually selected.
• If the sound is very quiet after connecting the device to the headphone jack, you need to open the sound settings and increase the volume for the signal sent to this output.
• If after connecting the acoustics through RCA output there is no sound, you need to double-check the connection and make sure that the cable on the TV panel is connected to the Audio Out connectors, and not to the Audio In.
• If the audio system is connected using HDMI ARC technology, but there is no sound, you need to make sure that this function is supported by the devices, the wire is connected to the connectors with the appropriate inscription, and the sound output to the speaker system is set in the TV settings.

So, if the TV panel has a quiet sound, this problem can be easily fixed by connecting additional speakers to it. It can be active or passive speakers, multimedia or stereo system, as well as home theater. To make the connection without errors, it is recommended to refer to the instructions for the TV, find out which outputs can be used for this, then make sure that there are similar inputs on the acoustics. If necessary, devices can be connected using adapters.

Unobvious features of Yandex.station.

Yandex station functions functions without internet and Yandex.plus subscription.

Many people know that for the full-fledged operation of Yandex stations, you need to have a wi-fi internet connection and a Yandex account with a Yandex subscription connected, plus, but it turns out that it is possible to use some functions without a subscription or the Internet.

So, on Yandex stations there is a Bluetooth speaker function, where you can stream music directly from a mobile device, but in conditions where there is no Internet, the Bluetooth turn-on command is not recognized, so you just won’t be able to connect. But there is one way to do it. The first step is to hold down the activation button for about 3 seconds, after which, in the mobile device, in the list of available wi-fi networks, connect to the yandex network distributed by the Yandex station. Further, in the available Bluetooth devices, you can find the speaker, connect to it and stream music. Of course, the Bluetooth speaker function can work without a Yandex subscription, plus, like the radio function, but a wi-fi internet connection is required to turn on the radio.

Samsung

Samsung also rarely has analog audio output, so you can connect via HDMI, coaxial, or optical output.

Types of inputs and connectors

For sound output, all TVs are equipped with special inputs and connectors that allow you to connect third-party speakers. Before connecting a speaker system, you need to determine which outputs on the TV are provided.

Special purpose connectors (SCART, RCA). They connect devices without a built-in amplifier.

How to Connect Speakers to TV

Digital connector (HDMI ARC). The input allows you to connect modern speaker systems to your TV, as well as amplified speakers and home theater systems that have the ability to reproduce truly high-quality sound. Not all television devices are equipped with such an input, but only the newest and most expensive ones.

With HDMI input, the user can enjoy great sound through the transmission of a high definition digital signal. Not to be confused with normal HDMI input.

Headset jack and line-in. Used if the TV has no dedicated inputs. Connection is carried out by adapters. tulips. To determine how easy it is to connect the amplifier to a TV, you need to inspect the rear panel of the device for the necessary connectors.

Leave a request and get a 15% discount on the first renovation!

Composite stereo system

The equipment has an almost perfect sound quality. Consists of the following elements: powerful speakers with a built-in amplifier, passive acoustics, and a subwoofer that decomposes sound into separate channels. Taken together, the composite stereo system will provide comfortable listening not only to musical compositions, but also surround realistic sound when watching a movie.

The stereo system is connected to a Samsung TV or other brands using the tulip connector. RCA or TRS adapters are also used. The sound from the TV is output directly to the speakers of the active group, so you need to use the recommended wires and cables.

Types of acoustics

Speakers for Samsung TV and other TV models are divided into two main groups in terms of technical characteristics: active and passive. The first ones are equipped with a built-in amplifier as standard and are powered directly from the mains. They do not require the help of additional devices. Typically, this type of acoustics is most often found in computer speakers.

Connection goes through a standard Mini Jack connector. Powered TV speakers are connected to the device using round 3.5 mm inputs. If the TV is not equipped with such a connector, then a special tulip adapter is used.

Passive acoustics, or subwoofers, do not have a sound amplifier, which changes the connection algorithm. It must first be connected to an amplifying device, then into one of the connectors on the TV panel.

IMPORTANT! If the polarity is not observed, the sound quality will be impaired.

Multimedia center

The technical predisposition of the multimedia center provides for high-quality sound that cannot be compared with some built-in TV speakers or inexpensive computer speakers. You can connect acoustics to the TV using bells or TRS jack.

IMPORTANT! There must be an OUT output on the back of the TV, which must be connected using a cable to the IN connector on the music center.

How to connect speakers to a TV for sound output

Many TVs are not equipped with the highest quality speaker system. When watching movies or TV programs, there is little sound from the built-in speakers. To make it more spacious and loud, you can connect any other sound amplifier to it. There are several options for how to output the sound from the TV to the speakers.

Home cinema

Home theater provides high quality audio transmission. It is the most optimal stereo system. For the highest quality sound, a 5.1 sound system is used, consisting of speakers and one subwoofer. The system has an amplifier with a professional receiver, which makes the sound of the speakers clear and spacious.

Samsung TVs have digital HDMI connectivity for superior audio output. Before connecting the home theater, you should turn off the TV to avoid short circuit.

IMPORTANT! Experts recommend connecting strictly following all the points described in the instructions.

How to connect TV audio Samsung 2019 with amplifier Easy

Wireless speakers

Modern Smart-TVs have a built-in Bluetooth module that allows you to pair your TV with other devices. It is not difficult to connect wireless speakers to a TV device, since the system has an intuitive principle that may differ slightly on different models. This method is convenient because the speakers can be remotely connected to a Samsung TV without unnecessary wires.

To connect wireless speakers, you need to do the following:

• In the TV settings menu, find the Bluetooth item and turn it on.
• The headset must be switched on for Smart-TV to find it.
• Then select the desired device for pairing.

Wireless speakers for TV are compatible not only with Samsung models, but also LG, Sony, Phillips and other manufacturers. Read the instructions that come with Smart TVs.

How to connect speakers to a Samsung TV

Video tutorial on how to connect speakers to the TV

Two methods of connecting speakers to a Samsung TV

Recently, this issue has become more and more frequent in various computer help forums. It’s no secret that modern TVs, especially those supporting Smart TV technology, perform extremely many functions, but there are nuances that cannot be compensated for by any advantages. One of these nuances is sound. The fact is that users are increasingly not satisfied with the power, clarity and sound quality on modern TVs. The only way out that they see in this situation is to connect additional acoustics to the TV, in particular speakers and speakers.

Attention. If the sound on your TV has gone missing or has noticeably deteriorated, then most likely this indicates a malfunction, in this case it is better to contact the masters at the service center to repair your Samsung TV.

As a rule, the problem is that not all users know how to connect speakers to a TV. Therefore, this article is devoted specifically to the topic of improving sound on TV using a third-party speaker system. For example, we will take a Samsung TV and tell you in what ways you can connect speakers to it.

The first method (the most common) is to connect speakers to the TV from a computer. As practice shows, problems with sound arise not due to the fact that the sound processor of the TV does not process it well, but because of something else. The true reasons lie precisely in the work of the regular speakers. In this case, you do not need to resort to cardinal methods at all. that is, to replace them, you can take ordinary computer speakers that have a 3.5 mm connector. It is in this place that you should be extremely careful and study well the characteristics of these speakers. The fact is that if amplifying devices are not installed on computer speakers, this will not give any result. For this reason, before connecting them to your Samsung TV, you should make sure they have an amplifier on them. It is very easy to check this. if the speakers can be connected to the network, then amplifiers are guaranteed to be available, and you can adjust the level of sound vibrations directly on the speakers. To simplify your task, you can always contact Samsung salons, service centers. Addresses in the capital and other cities are presented on the website.

The second method, no less effective, is to use a tape recorder or a music center as sound speakers. This is done very simply and quickly. All you need to do is connect one of the aforementioned devices to your Samsung TV. Let us tell you a secret. music centers and tape recorders have the ability to reproduce sound much better than televisions, so this option will absolutely save the situation. Now let’s get back to the technical part of the question. Take a TRS-RCA adapter wire (its 3.5 mm jack) or RCA-RCA (tulips), no matter which one you choose, both options are suitable, then find the corresponding jacks on your TV and music device and using these wires- adapters connect them. That’s all, there is nothing complicated in this procedure, as you can see.

We hope our tips helped you connect your speakers and enjoy the sound quality from your Samsung TV.

Active acoustics

Due to the fact that a sound amplifier is already built into the active speakers, there is no need to spend money on additional equipment. And also a volume control is placed on the front panel. To connect such equipment to a TV, you just need to insert the cable into the appropriate connector.

Most models are paired via a 3.5mm jack. This is a standard option widely used by many manufacturers.

This port connects not only ordinary speakers, but also home theaters, powerful speakers and other musical equipment.

In the same way, a multimedia center can be connected to a TV receiver. The cable is connected to the TV through the OUT port, and the IN connector is selected on the audio equipment.

When pairing old type speakers or using an older TV model, tulip cables are often used. The cord is equipped with two or three colored plugs. To transmit a sound signal, red and white plugs are connected to the equipment. Pairing is done by colors.

How to connect with wire?

Of course, wireless connection is more convenient, but pairing with wires is more reliable.

How to connect wireless speakers?

and more modern users choose wireless acoustics. Due to the absence of wires, it can be placed in any part of the room, the main thing is to maintain the optimal distance from the TV. Most models are synchronized via Bluetooth. Currently, many computer speakers have been released, which are convenient to take with you with a laptop or use as additional acoustics for TVs, mobile phones and other equipment.

Connecting a wireless headset is as follows:

• first you need to turn on the headphones and put them into pairing mode;
• then you need to open the settings on the TV, activate the Bluetooth module, after which the TV receiver will search for nearby devices, and the headset will appear in the list;
• select gadget and confirm pairings.

For synchronization without additional equipment, the TV must be equipped with the appropriate module. If the latter is missing, you need to purchase a special adapter, insert it into the port and activate. Modern models are connected via the USB port. Older TV receivers may not have this connector. In this case, you will need an adapter cord. Finding the right option is easy given the wide variety of cables.

In this case, synchronization occurs according to the above scheme, the only difference is that it is necessary to use additional devices (adapter cable, adapter).

Note: if you are sure that the speakers are fully functional, but the connection does not occur, you need to check the activity of the TV’s wireless module. This can be done in the hardware settings. And also do not forget to periodically charge the speaker battery.

How to connect speakers to a Samsung TV?

Connecting additional speakers to your TV is a great solution for improving sound quality. As a rule, standard speakers cannot boast of surround and clear sound, let alone a clear transfer of various sound effects. There are many options for connecting speakers. both wired and wireless models. With the help of additional musical equipment, you can take watching your favorite movies and TV shows to the next level.

WI-FI connection

Some acoustics models can be connected via a wireless WI-FI network. This is another convenient way to sync without cables. For pairing, the required module must be installed in the TV. Today, almost all Smart TV models are equipped with it. Connection is carried out in the same way as when using Bluetooth speakers.

Note: Each of the synchronization methods has its own advantages and disadvantages. If you are unsure which option to choose, try each one.

Connection methods

After synchronizing the TV with the speakers, the user will have access to sounds and effects that were not audible through standard speakers. This will make your movie experience more realistic. Cinema lovers who value not only image quality but also sound accompaniment pair TV receivers with powerful speakers or full-fledged speaker systems.

Experts classify musical equipment, taking into account its functionality, technical characteristics and other parameters. The most widespread are active acoustic systems.

This type is characterized by the fact that manufacturers equip equipment with a built-in amplifier. It is an essential element for achieving optimum power and other quality parameters.

Passive speakers are also used and connected to the TV. This type of acoustic equipment does not have its own amplifier, so it will have to be purchased separately. This is their significant disadvantage compared to active speakers. However, with the help of an additional amplifier, higher power can be achieved.

There are 2 main ways to connect speakers to TVs:

• connection using wires. the technique is mated using cables, inserting them into the appropriate connectors;
• wireless synchronization that occurs via Bluetooth or WI-FI.

To connect acoustic equipment to Samsung TVs, you can use one of the options depending on the model of the TV receiver and the capabilities of the speakers.

Passive speakers

To connect a passive speaker system, you need a connecting cord and amplifier, which must be purchased separately. The main thing is that the power of the amplifier exceeds the indicator of the speakers by at least 30%.

Synchronization occurs according to a certain pattern.

• The first step is to connect the speakers to the amplifier. Each channel has a specific output. It will be easy to connect the equipment, since the ports are signed.
• After that, the receiver is synchronized with the TV. If everything is done correctly, the sound from the TV receiver will come through the speakers.

Next, watch the video on how to properly connect speakers to the TV.

Connecting passive speakers

Passive is an acoustics that does not have a built-in amplifier. To connect this type of equipment to the TV panel, a separate unit is required. The TV itself can amplify the signal, but for good acoustics its power will not be enough.

Important! To connect the speakers, you must choose an amplifier whose power is at least 30% of the acoustics power. You should also pay attention to the resistance, it should be the same for both devices.

When connecting the speakers to the amplifier, you need to take into account the polarity, i.e. the left speaker should be connected to the left channel and the right speaker to the right. If you do not follow this rule, the sound will be of poor quality.

The wires for connecting the equipment are usually included in the kit, otherwise they will need to be purchased separately. The cross-sectional area should be as high as possible, but not less than 1 sq. Cm. The amplifier is connected to the speakers via screw terminals, and to the TV for best results via HDMI. If there is no such connector, then the connection is made through the available outputs, as a rule, these are RCA.

Features of connection to some TV models

Connecting acoustics to television panels may differ depending on the brand of the television. Further, for example, the two most popular manufacturers will be considered.

LG TVs do not have an analog connector, aka “tulip” or RCA output. To output sound to additional acoustics, you can use an optical output, SCARD or HDMI, or connect an additional device (for example, a DVD player) and output sound through it.

Connecting a stereo system

Sound can be output to the existing 2.1 stereo system, which consists of a subwoofer and two speakers. It is connected via the 2 RCA or mini Jack outputs, or, if available, via the SCARD connector. In this case, you will need to purchase a SCARD-3RCA or SCARD. mini Jack cable.

Advice! When using a 3 RCA cable, the yellow wire will remain unused as it is for video signal.

Connecting powered speakers

An active speaker is a 2.0 speaker system that has a built-in amplifier. It can be easily identified by the power wire and the volume control. Most computer speakers are active.

Usually, to use active acoustics, a 3.5 mm mini Jack output is used, it is also a headphone jack, because it has a corresponding logo next to it. The connection is made via a mini Jack. 2RCA cable, which usually comes with an audio system. Mini Jack is connected to the corresponding socket on the TV, and 2 RCA plugs to the corresponding inputs labeled Input, which are located on the back of the speakers.

Advice! If there is no headphone jack on the TV, you can connect active speakers through the Audio-R (white) and Audio-L (red) outputs. In this case, a 2RCA-2RCA cable is used.

If the speakers are expensive, they may have an optical input. It is usually closed with a plug, but you can identify it by the Digital In inscription. If your TV has a similar output, it is recommended that you purchase an optical cable and use it to connect the devices. This will provide superior sound quality unlike previous connections.

Connecting active acoustics 2.0 provides high-quality and loud sound, but it does not reproduce low frequencies. Therefore, fans of movies with a lot of special effects and modern music with a lot of bass are advised to purchase an active subwoofer. As a rule, there are 2 RCA inputs on the back of such a device, so you can use a mini Jack. 2RCA cable to connect it. In this case, the speakers should be connected with a 2RCA. 2RCA wire, or a splitter should be connected to the headphone output to output the sound directly to the speakers and subwoofer.

Some manufacturers produce their own active acoustics, which they recommend to use in conjunction with their television panels. For example, Samsung TW5500 has an optical input for connecting to other devices. But besides it, the TV panel contains the TV SOUNDCONNECT function, which allows you to connect Samsung equipment wirelessly via Bluetooth.

Samsung

If the owner of a modern Samsung TV (for example, 5 series) decides to connect the acoustics with an RCA cable, he will find that there are no RCA connectors in the TV panel. Audio devices are connected via optical output or HDMI ARC, as well as a headphone jack.

Connecting acoustics

Various equipment can be connected to the TV panel to improve the transmitted sound. It can be active and passive speakers, multimedia or stereo system, home theater.

Possible problems and solutions

There are times when it is not possible to connect acoustic devices to a TV receiver, or the sound is reproduced in an unsatisfactory quality. Then you can try to solve the problem in several ways.

• If after connecting the acoustics to the TV, there is no sound, you need to refer to the settings of the TV receiver in accordance with the user manual. Typically, the audio is automatically switched only to the headphone jack, otherwise the output must be manually selected.
• If the sound is very quiet after connecting the device to the headphone jack, you need to open the sound settings and increase the volume for the signal sent to this output.
• If after connecting the acoustics through RCA output there is no sound, you need to double-check the connection and make sure that the cable on the TV panel is connected to the Audio Out connectors, and not to the Audio In.
• If the audio system is connected using HDMI ARC technology, but there is no sound, you need to make sure that this function is supported by the devices, the wire is connected to the connectors with the appropriate inscription, and the sound output to the speaker system is set in the TV settings.

So, if the TV panel has a quiet sound, this problem can be easily fixed by connecting additional speakers to it. It can be active or passive speakers, multimedia or stereo system, as well as home theater. To make the connection without errors, it is recommended to refer to the instructions for the TV, find out which outputs can be used for this, then make sure that there are similar inputs on the acoustics. If necessary, devices can be connected using adapters.