How to Connect Jbl Headphones to a Computer

Oh, how many times I fell from a chair, after, having forgotten that there were headphones on me, I tried to get up. I think everyone knows this picture. The problem is that in this way you can not only break off the wired headphones, but also tear out the sound card port. Which can lead to damage to the sound card or the motherboard.

That is why I decided. And yet I bought myself wireless headphones. In my example, I will show you how to connect bluetooth headphones to a computer or laptop.

  1. Pros and Benefits of a Bluetooth Headset
  2. Headphone connection without additional adapter
  3. Step 1: Checking the Blue Tooth
  4. Step 2: set up the connection
  5. Step 3: Verify Communication
  6. Connecting headphones with an optional adapter
  7. instruction
  8. Skype setup
  9. Problem solving
  10. No Bluetooth in task manager
  11. No sound
  12. The computer does not see the headphones

Pros and Benefits of a Bluetooth Headset

  • Most modern headphones have “hands free” technology. You can walk around the room, do and do your own business and at the same time easily manage the switching of songs, pause, rewind. Using special buttons on the device.
  • All devices are adapted for any operating system, be it Windows 7, 8, 10, XP or even iOS. You can safely connect them not only to a PC, but also to smartphones or tablets.
  • How many wired headphones I had, and everyone had a problem breaking one wiring at the base. As a result, only one part works. Wireless does not have this. Since the wires are completely absent.

Headphone connection without additional adapter. Step 1: Checking the Blue Tooth

And so, a lack of built-in Bluetooth module may be a small problem. Unfortunately, not even all laptops have this transmitter, not to mention desktop computers. Now we’ll check whether we have Bluetooth or not.

  1. At the same time, hold down the Windows button and R. The command execution window will pop up. We enter such a line “devmgmt.Msc” click “OK” or Enter.
  1. We look in the device manager. You need to find any mention of Bluetooth that will say that this technology is present in your computer.
  1. Double click on the adapter device. A window will pop up where it will be written that the device is working fine.

If the device is not found, but you know that it is, then go to the problem solving chapter in the same article.

Step 2: set up the connection

  1. In the tray in the lower right corner you should see the Bluetooth icon. If it is hidden, then just click on the arrow that points to the top to open hidden icons.
  2. Now click on the “Blue Tooth” icon and from the “Add Bluetooth Devices” drop-down list. If the device is turned off, turn it on!
  3. Next, turn on the headphones. For me, they are activated using the power button, which you need to pinch, until the device starts to burn. Some models have a separate Bluetooth button that activates the transmitter.
  4. The computer will try to find any devices and in the “Settings” window you will see the name of the headphones and the word “Connected” if the connection has occurred without failures.

Step 3: Verify Communication

Already at this stage, you can try to play any music, but problems may arise. The fact is that a successful connection does not say that after that the sound will play without problems. So, if the sound is interrupted or the headphones are silent, let’s go adjust the sound.

  1. Go to “Start” and look for “Control Panel”.
  2. Next, depending on the version of the OS, you need to go to the sound settings. Just find the speaker icon and double-click.
  3. The settings menu opens. We are interested in the first tab “Playback”.
  4. Double-click on the headphones. After that in line “Application of the device”, should stand “Use this device (on)”. If not, then activate the headphones. Click “Apply.”
  1. For every fireman, restart the computer or laptop. After that, turn on Bluetooth on your computer, then activate the headphones and try listening to the sound again.

Connecting headphones with an optional adapter

I will also tell you how to connect Bluetooth headphones to a computer, which immediately comes with a built-in adapter for a PC that looks like a flash drive. That is, even if there is no Bluetooth on the computer, then you can safely use headphones.

  1. Turn on the headphones and insert the adapter into the USB port.
  2. At start in the search bar enter “Connecting devices”, press “View devices and printers.”
  1. Next, right-click on a free field. Select “Adding devices.”
  1. The operating system will frantically search for connected devices. The installation of drivers will also begin. At the very end you will see a window with a message that the device has been added.
  2. Now in the same place “Devices and Printers” click on our headset with the right button and select “Bluetooth operations.”
  1. The system will automatically search for the necessary services. At the very end, click “Listen to music”.

Now you can turn on any player, or watch movies on the Internet, and listen to sound from brand new headphones. If there were errors during installation, then install the driver from the disk, since usually with such a headset there is an additional disk with software. In any other case, you can download the software from the official site.

instruction. Skype setup

If you have a full-fledged headset with a microphone like mine (from Bluedio), then you can chat on Skype and walk around the house with headphones. This is quite convenient, although before that you need to make some manipulations with the settings in Skype.

  1. We start Skype.
  2. Go to the settings. Skype versions are constantly updated, and this button opens differently in different versions of the program. So just look for the buttons.
  3. We go to the “Sound and” section. In the “microphone” should be our Bluetooth device. If worth “Default communication device”, just click on this label and select your headset.

Problem solving. No Bluetooth in task manager

  1. Perhaps you just installed the driver for the adapter. There, in the device manager, go to the tab “Other devices”. Maybe “Unknown device”. And it will be our Bluetooth.
  2. Double click on it and in the tab “Driver”, press Refresh. If the drivers do not update from the Windows server, then you will need to look for drivers from the motherboard, since the Bluetooth adapter is wired there. You can also download the driver pack from https://drp.Su/ru/foradmin. Scroll down a little to the section Driverpacks and download both packs.
  1. If in other devices there is nothing at all, and you feel inside that you have Bluetooth. Then maybe it is disabled in the BIOS. When rebooting, hold down one of the keys: Del, F2, F3 (the button depends on the version and type of BIOS, so you should try all the buttons).
  2. As soon as you appear in the very inside of your PC, go to the device tab. If you find Bluetooth just turn it on by switching to “Enabled”.
  1. To install, just insert the device into an accessible USB port.
  2. Next, the drivers should download automatically.
  3. If this does not happen, then go to the dispatcher task tab “Other devices”.
  4. There will be a new device. Our task is to update the driver. Sometimes a disk comes with the device, then you should install from it or download firewood from the official site.

No sound

If there are problems with audio playback, first check that the sound is set to full. To do this, click on the speaker in the lower right corner and see that the sound level on your headphones is above zero.

  1. If after that there is no sound, then most likely the problem is in the drivers. We also go to the device manager and try to update the driver.
  1. Next, the installation window will pop out or the system will inform you that the software does not need to be updated. Then it’s worth downloading the driver to the mainland or an external adapter from the official site. For an external medium, you must enter the name of the device in any Internet search engine.
  2. For the internal module, everything is much more complicated. If you have a disk from the motherboard with the original drivers, then install the software from there. Otherwise, you will need to look for the name of the motherboard model manually. Poke “Start” and prescribe “CMD”. Run the command line. We write this command:
  1. A message pops up with full information about the motherboard model. We are interested in the line under Product “. We open the browser and enter this combination of letters and numbers in Yandex or Google. A link to the official website with this motherboard will open, where you can download firewood. Next, we just install them.

The computer does not see the headphones

  • Try restarting the headphones themselves.
  • If this does not help, fully charge them and try the connection again.
  • Reboot the PC.
  • Update the driver on the Bluetooth adapter and motherboard.
  • Perhaps there is a problem with the Bluetooth adapter or the operating system (I had this with a wireless mouse). Try connecting them to a phone or other PC, laptop, tablet. To check the performance.

If the problem persists, then the problem is in them and you need to give the wireless headset under warranty.

Many people today are wondering how to connect wireless headphones to a laptop. And this is not strange. Wireless technology is constantly evolving, improving and becoming more and more part of everyday life. This is due to high convenience. You see, it’s much more pleasant to listen to music or talk with people, for example, on Skype and at the same time have complete freedom of action, knowing how to connect Bluetooth headphones to a laptop.

As a rule, connecting Bluetooth headphones to a laptop does not cause difficulties and any problems. Everything is very simple here. Over, instructions are usually attached to the headphones, which describes in detail the process of connecting to a PC. But often users lose it. In addition, certain difficulties may arise not only with installation, but also with the use of a wireless headset.

How to connect Bluetooth headphones to a laptop:. The process of connecting a wireless headset to a laptop

Now let’s take a closer look at the steps to connect wireless headphones to a laptop:

  1. This tool launches as follows: press the WindowsR key combination. In the window that appears, write devmgmt.Msc and click OK. If everything works fine, then you will find a Bluetooth adapter. After that, you can move on to the question of how to connect bluetooth headphones to a laptop.
  2. Press the power button on the headphones and hold it until the indicator starts flashing red and blue (depending on the model, the colors may differ, for example, green and red).
  3. Locate the Bluetooth icon on the laptop in the system tray (in the lower right corner of the desktop). Click on it with the right mouse button.
  4. Select “Add Device.” After that, a window appears in which the computer offers a list of available connections. Select the name of your headphones and click “Next.”
  5. Now just follow the prompts on the screen. If the system asks for a confirmation code, enter 0000. This is the standard password for such equipment.

Now you know how to connect a bluetooth headset to a laptop. As you can see, there is nothing complicated. If you need to connect a wireless headset to your phone or tablet, read this article. It is worth noting that sometimes errors and difficulties may occur.

Possible connection errors

First of all, you should pay attention to the driver. Since it is he who controls the operation of the wireless module. In other words, if it does not work correctly, then the connection will be unstable or you will not be able to connect devices at all.

In addition, the built-in Windows tools can also sometimes work incorrectly, especially if you are using the pirated version. In this case, it is recommended to install the Bluesoleil program. It provides users with several important benefits:

  • Intuitive interface (working with the adapter is now even easier).
  • Stable communication without breaks.
  • Manage multiple connections simultaneously.

In addition to connecting, you may have to configure the system a bit. To do this, right-click on the speaker icon in the tray and select “Playback Device”. Here you just need to turn on “Bluetooth Audio”. However, usually everything is automatically configured.

Now you know not only how to connect the headphones to the laptop via Bluetooth, but also how to eliminate the most common errors. Absolutely everyone will cope with this, since this technology is the simplest and most convenient to use.

Why the phone does not see the Bluetooth headset:

I have experience in the IT field for more than 10 years. I am engaged in the design and adjustment of commissioning. There is also extensive experience in building networks, system administration and working with access control systems and surveillance.
I work as a specialist in the Techno-Master company.

We recommend reading:

  1. How to connect wireless bluetooth headphones to a computer
  2. How to connect a wireless Bluetooth mouse to a laptop
  3. How to connect a wireless Bluetooth headset to a computer
  4. How does the ELM327 Bluetooth connect to a laptop
How to Connect Jbl Headphones to a Computer

Share the material in social networks:

Yeah, the connection button on the headphones, how come. With this button, it connects unclear where, and catches a sound that is not from my computer

Thank you, everything worked out the first time!

Hello. Your headphones come with instructions. Here in this instruction, everything is laid out in detail where to press, how much to hold and so on. If the instructions are not on hand, then it can be found (by headphone model). I don’t know the models of your headphones, so I can’t describe a detailed algorithm of actions. The fact is that on different models from different manufacturers have their own nuances, subtleties and secrets.

Well, yes, and if they are defined as a BT headset, and they are not displayed in the “playback device”, how do you make them work as headphones, and not as a headset?

The problem is the same as yours on the last screen. Writes the connection is interrupted I press to connect but nothing happens. What to do?

Hello. And what is the difference between headphones and a headset? The connection process is no different and everything else is the same. The only difference is that the headset has a microphone. But, initially, a headset is the headphone. If everything works, then what difference does it make to you what to name the device, the main thing is that the sound would enter the speakers. I don’t understand what you can’t do? What is the problem? When headphones are connected, the computer (phone or tablet) automatically determines the type of equipment to be connected, and immediately uses this equipment for its intended purpose. That is, if these are headphones, then the computer immediately after pairing and connecting plays the sound exactly in the headphones. Another thing is that some programs may require additional configuration. That is, for example, Skype itself does not determine where to direct the sound. Even with headphones connected to the Jack 3.5 ″ jack, when you make a call, sound can go into the laptop’s built-in speakers, while music will play in the connected speakers. To assign the desired playback device, you need to go into the Skype settings, go to the “Sound” section and there you can already assign a microphone and speakers for playback (with headphones connected, the list of available devices will be wider). And this applies not only to Skype. Many games and communication programs require manual configuration. And about the connection, instructions are attached to the headphones. It describes in detail how to connect from a computer or phone (tablet) and how to use them. Therefore, read the instructions. There is all the information you need.

Hello. This means that you do not have drivers for Bluetooth or headphones. Some devices connected via Bluetooth require the installation of additional drivers, and sometimes control programs. In general, all devices require drivers, but most drivers are in the operating system itself and when connected, WIndows itself discovers the necessary software. But, this also happens, then the necessary software is not in the system and it simply cannot determine what to do when connected. In this case, an automatic disconnection occurs. The solution for you is to try installing the drivers for Bluetooth, and also check if there is a driver disk in the kit with the headphones (there will be drivers on the disk containing all the necessary protocols for streaming data). If there is no disk, then again on the Internet you can read the description of the headphones and find instructions specifically for your model of headphones. The instructions will tell you whether to install any drivers. If you do not need, then the drivers for Bluetooth just install the appropriate ones. Such drivers must have all the necessary protocols to support all the Bluetooth communication functions. For your case, I can’t specifically describe the instructions, because I don’t know the models of your headphones.