How to connect bluetooth to Android

Connecting a Bluetooth headset to an Android smartphone

Wireless headset has been in demand for a long time. Almost all tablets, laptops and phones support Bluetooth, and even in the budget range. Headset. a simple multimedia device, but it allows you not to be distracted during training, when driving a car, to have a conversation in subzero temperatures outside to protect the battery from rapid discharge.

In order to connect wireless headphones to Android phones that support the Bluetooth protocol, you must perform the configuration procedure. How to do this quickly, see below.

How can I transfer data from Android to iPhone wirelessly?

Run File Manager on your iPhone, press the “” button and select “Wi-Fi Transfer” from the pop-up menu, see. Screenshot below. Set the switch to “On” on the “Wi-Fi Transfer” screen to get the address to wirelessly transfer your iPhone files. Connect your Android phone to the same Wi-Fi network as your iPhone.

Although the iPhone has built-in Bluetooth technology, the ability to transfer files wirelessly is limited by its operating system. To wirelessly transfer files between an iPhone and an Android device, both devices must be running the same third-party Bluetooth file transfer app.

How to pair a Bluetooth device with an Android smartphone or tablet

Once Android Bluetooth is enabled, you can add a Bluetooth device. The Most Reliable Way. Open the Settings app on your Android smartphone or tablet and tap on “Connected Devices”

To start pairing Bluetooth on Android, go to “Connected Devices”

Another option. Use the Android “Quick Settings” available by swiping down from the top of the screen. Tap and hold the Bluetooth icon.

Tap and hold the Bluetooth icon Android Quick Settings

Regardless of which method you choose, you’ll be taken to the Connected Devices screen. To connect a Bluetooth device, tap on the ” Pair new device” option.

Tap the option at the top to connect Bluetooth devices on Android

Your Android Smartphone will start searching for nearby Bluetooth devices, which can take a while, so be patient. At this point, you should make sure that your Bluetooth device is in discoverable mode, as explained in the previous chapter. In the list of Bluetooth devices available for pairing, tap on the name of the accessory you want to connect.

All Bluetooth-enabled devices appear under Available Devices

Then follow the instructions on the screen, if any. For some devices, the Bluetooth connection in Android may already be established. When it comes to Bluetooth headphones, a popup appears where you can decide whether to allow access to contacts and call logs. Tap Pair to connect to a Bluetooth device.

Set Bluetooth device permissions and confirm Bluetooth pairing on your Android

Your Android may need various final steps to complete the connection to your Bluetooth device. For example, if you are connecting a Bluetooth keyboard, you may need to use it to enter the Bluetooth pairing code displayed on the Android screen. Bluetooth accessories can also be set up with a default code. In this case, to find the key required to pair the Bluetooth device, it is best to refer to the user manual.

Read more:  How to set the battery percentage on your Samsung

Pairing Bluetooth on Android may take a few moments to complete. If all went well, the new Bluetooth accessory will appear in the “Active” list under “Available Media Devices” on the connected devices screen.

On Android, Bluetooth devices appear on the connected devices screen

Here we go! You are now connected to a new Bluetooth device and can use it at will.

Pairing Bluetooth on Android when using a Samsung Galaxy smartphone

Bluetooth settings on Android are different when it comes to Samsung Galaxy smartphones and tablets, which have their own interface. You can connect Bluetooth devices faster if you use the quick settings menu to enable Bluetooth. Tap (or tap and hold) the Bluetooth icon, and Android will immediately start scanning for available Bluetooth devices.

Turn on Bluetooth in Android from Quick Settings on Samsung

If the Bluetooth device is ready for pairing, as explained in chapter 1, its name will appear under Available devices. To add a Bluetooth device to your Samsung Galaxy Android, tap on its entry.

Your Samsung Android will start searching for Bluetooth devices

Confirm your selection by pressing OK, and the new Bluetooth device will be connected to your Samsung Android.

How to add a Bluetooth device from Quick settings

You can also pair a Bluetooth accessory by going into the Settings app on your Samsung Android and tapping on Connections.

Tap Connections to start connecting to the Bluetooth device on your Samsung

Next, make sure that Bluetooth is turned on and tap on its entry.

Tap on the Bluetooth Android setting on your Samsung

You will be taken to the Bluetooth screen, and your Samsung Android will start searching for Bluetooth devices.

Tap on the name of the new Bluetooth device that you want to pair with, and then confirm your choice by tapping OK.

How to connect a Bluetooth device from Android Settings on Samsung

Once you add it, your connected Bluetooth device will appear in the Paired devices list.

Android Bluetooth connection successfully established on the Samsung

Type: You can quickly reach the screen above and see your devices in the Paired devices list by tapping and holding the Bluetooth icon in the Quick Settings menu.

How to connect two Bluetooth devices at the same time on Android

As we mentioned in a previous article, we’re going to show you the steps for connecting two devices at the same time. And first, let’s do it with a bluetooth headset. which is very easy. But for many users, it may seem a little more difficult to add a second. Bluetooth headset.

This is something that many people want to do if you’re using an Android tablet. And you want to share a movie with someone or just share music without disturbing others. So, we will tell you what you need to do to pair two Bluetooth devices at the same time.

Connecting your iPod to your stereo

If the function is supported, then the radio must necessarily have a USB connector. Often it is on the back wall, and the kit comes with an extension cord to take it into the cabin. If the function is there but USB is not, please contact the person who installed the cassette or just check in the glove compartment, under the panel or in the area of the cigarette lighter.

Love Apple or not, everyone decides for himself. But definitely don’t underestimate its impact on the industry in its day.

Read more:  Can arpods be connected to the samsung

Once connected this way, the radio will automatically switch to work with the iOS device and you can listen to music. The advantage of this method is that the signal will be transmitted in a “raw” form, and the radio will process it according to its own algorithms, instead of receiving a ready signal. Especially true for boomboxes with audio processor.

Bluetooth technology capabilities on Android

Bluetooth technology appeared on the market in 1998 and immediately gained popularity among the developers of multi-functional gadgets. It is a new way to transmit information that is an alternative to the infrared ports that were used before. The reason for the popularity of Bluetooth technology is the transfer rate.

The earliest Bluetooth modules transferred files at up to 721 kbps, while today’s devices transfer larger files at up to 24 MB/s.

No internet traffic is used to pair devices via Bluetooth, you just need two devices with functioning modules.

With the advent and development of Wi-Fi the popularity of Bluetooth technology has not decreased, because it uses an order of magnitude less energy resources. Wireless headphones, sports bracelets, smart watches, and other Bluetooth devices are created for this reason.

Connecting a Bluetooth headset

Charge the headset

I will still assume that you have a new headset. And it is usually discharged. In addition, if the battery is not used for a long time. it loses its charge (I mean that the headphones can discharge to zero!).

Turn the headset on and put it into pairing mode

After charging, turn on the headset and put it into pairing mode. Usually you need to hold the power button (or the answer button) for a few seconds to do this. Depends on the model of headset).

If the headset is in pairing mode you will see the LED on the headset blinking blue-red-blue-red. (the colors may vary in some cases)

Turn on the Bluetooth module in your phone and search for devices

To turn on Bluetooth, go to your phone’s settings under “Connecting Device/Bluetooth” (for Android 8.0/10.0).

Settings. device connection. Bluetooth

Then move the slider to the mode “On.”. the device should start searching for nearby devices (place the headphones next to the phone).

Ideally, in just a few seconds you will see your headset model among the Bluetooth devices found. It remains to click on it and start the pairing process.

Choose a wireless headset and connect it

(Optional) enter the PIN code if necessary to connect the headset

In many cases the headset is paired with the phone automatically and you do not need to enter anything.

However, there are some models of headphones, when you connect them you will need to enter a PIN-code (on the phone will appear spets. window with a line for entering):

  • The PIN code is usually always listed on the packaging (in the brief instructions) of the headphones (headset);
  • If headset manual doesn’t have PIN code, try most popular choices: 0000, 1234, 9999, 0001, 1111.

I want to note that in some cases you can continue connection without entering anything in the window with PIN-code (and of course phone is paired with headset).

you can start working with the headset.

Ideally, that’s it. Once the headset is paired, you can start using it.

If suddenly you failed to connect (for example, during the pairing error occurred), repeat steps 2รท4 again. I want to point out that while searching headphones is recommended to put them closer to the phone (not more than 1 meter, but better close to the phone)!).

Read more:  Connect Tablet To Usb TV

Why the Smartphone may not see or connect to the Bluetooth headset

This is one of the most popular reasons (especially, many people get “in trouble” with new devices that go to zero battery. and the user thinks it’s not (or that the device is broken at all)).

Notice the light: when the headset is on. it should light up (red/blue color). See. screenshot below. Almost all headsets have similar indicators.

Whether the headset is turned on. Pay attention to the indicator light

2) The headset was paired with another phone

If you have taken a headset that has worked with another phone (and to which it was automatically paired). it is possible that the pairing function will be disabled immediately after you turn on the device.

Try to pair your phone manually: hold the trigger in until the blue/red light starts blinking.

Be sure to double-check your phone’s settings: is Bluetooth turned on (or what if, like me, is turned off) ? In some cases (e.g. after a system update). the module could have been disconnected without your command.

Settings. pair the device. Bluetooth

Check the headset on another device to make sure everything is OK.

To help!

By the way, you can buy a new headset on the cheap in Chinese online stores (the best of them listed here)

Instructions

In order to install a Bluetooth dongle on your Android tablet, you need to follow these steps:

  • Connect OTG cable to your smartphone or tablet.
  • Insert the external adapter to the other side of the cable.
  • On your mobile device, go to the applications menu.

Next we want to point out that there is no Bluetooth USB dongle driver for Android, as you can install it yourself: there are no sites on the Internet with any drivers for this operating system. Initially android already has everything you need to work with some devices. So you can not download the Bluetooth dongle driver for your Android tablet, if suddenly after connecting, it will not work.

The thing is that in official firmware, where the device initially does not have any module, the developers cut unused software features, such as the ability to connect Bluetooth in our case. This is done to free up space and resources of the device, so that the idle functionality does not load the system.

There is another way out of this situation. If you have custom firmware, such as the one from CyanogenMod, then you can be calm about it, because the custom builds use a pure Android with all the built-in services. If the stock firmware fails to connect the wireless module, we suggest you to look at the amateur builds. There you can find the right version.

There are also special microSD cards with built-in Bluetooth. We rarely have them here, so most of the time users order them from China. Their operating principle is exactly the same, but they are inserted directly into the slot for an SD-card, take up much less space and do not require the use of OTG-connection.