How to connect Airpods to iPhone 7

Check compatibility

If you’re struggling to set up your Airpods with a Mac for the first time, it’s worth checking for compatibility issues. Depending on the Airpods model, the Mac must have the following macOS versions to establish a connection.

Airpods (2nd generation). macOS 10.14.4 or later

Airpods (1st generation). macOS Sierra 10.12 or later

If you’re not sure which version of macOS your Mac is running, open the Apple menu and choose About This Mac. You should see the relevant information listed on the Browse tab by default in the window that opens.

If your Mac does not exceed the required compatibility threshold, go to the Apple System Preferences Software Update to update macOS. If you are using macOS High Sierra or earlier, open the App Store and click the Updates tab.

Check Bluetooth.

Bluetooth may be disabled on your iPhone. To check this, open Control Center by swiping down from the top right corner of the screen.

Note. On an iPhone with Touch ID, swipe up from the bottom of the display instead.

If the Bluetooth icon is grayed out, tap it to turn it on. After that, your Airpods should connect automatically. If it doesn’t (or if Bluetooth was already on), double-tap and hold the Bluetooth icon, then tap Airpods to manually connect to them.

If your iPhone can’t connect with your Airpods, try resetting your Bluetooth radio. To do this, tap the airplane mode icon in the Control Center. Then touch it again after a few seconds.

Install as audio device.

Sometimes your iPhone might not set up Airpods as an audio device even though it’s connected. To fix this, open Control Center, press and hold the music control and tap the AirPlay indicator.

If you see your Airpods under Headphones, click to set them as audio device.

Charge Airpods.

Your Airpods may no longer be charged. Try putting them in the charging case or wireless charging case for at least 15 minutes before taking them out again. Various other issues can also prevent Airpods from charging properly.

Restart iPhone.

Restarting iPhone can also fix persistent Airpods connection problems.

To do this, quickly press and release the volume up and down buttons. Then press and hold the side button to display the “Swipe to turn off” prompt.

With iPhone off, press and hold the Side button again to turn it on.

Note. If your iPhone has Touch ID, pressing and holding only the side button will prompt you for “Swipe to turn off”.

solutions when Airpods won’t connect to iPhone

This can happen for several reasons. Let’s take a look at them, as well as what you can do to get your Airpods back into your iPhone. The following solutions also apply to iPad.

Reset Airpods.

If none of the above solutions worked, you can reset your Airpods. This requires you to disconnect and reconnect them to your iPhone. The following steps should show you how to do this.

• Insert Airpods into the charging case or wireless charging case for 30 seconds and open the lid. Then go to Settings Bluetooth and tap the i next to your Airpods.
• Click Forget This Device. Click “Forget device” to confirm.
• Click “Remove device” again to confirm.
• Press and hold the setting button on the charging case for 15 seconds until the status light flashes amber.
• Hold Airpods close to iPhone and keep the cover open. Click “Connect” in the Airpods pop-up window. Then tap Done to complete the pairing process.

Probably from now on you will have no connectivity issues between Airpods and iPhone.

How to connect 2 pairs of Airpods to Android?

• Insert the headphones into the case
• Hold the round button on the back of the case for 2-3 seconds
• As soon as the indicator inside the case starts blinking white, release the button
• Ready! Headphones in pairing mode

Is it possible to connect wireless headphones to different phones?

The earbuds can be connected to two Bluetooth devices at the same time, including phones, tablets and computers running Android, iOS, Windows, Linux or HarmonyOS.

How to connect 2 Bluetooth earphones to the phone?

• Turn on the headphones and Bluetooth module on your smartphone.
• Go to the phone menu, find the Bluetooth tab, enter it.
• You will see a list of devices that are within range of the signal.
• Click on the device name. the smartphone will try to establish a connection with it.

How to connect 2 pairs of Airpods to a laptop?

Can you connect two pairs of Airpods to one computer at the same time

Connect AirPods Pro to iPhone 7 (2021)

• Connect both Airpods to your computer.
• Open Audio MIDI Setup in Applications / Utilities
• Click in the lower left corner and select “Create Multi-Output”
• Check the boxes next to both Airpods wallpaper (or any other 2 output devices)

How to switch Airpods between devices?

Doing this is as easy as enabling:

• Connect Airpods to iPhone or iPad (or to another device);
• Go to “Settings”. Bluetooth. the i button opposite your Airpods;
• Click the Connections tab. to this iPhone ”;
• Turn on “Next time I connect to this iPhone“.

You asked: How to connect 2 pairs of Airpods iPhone 7?

Press and hold the pairing button on the second Airpods or Beats until their indicator light pulses white. When the headphones appear in the Other Devices section of the menu, select them and wait for the connection. You now have two pairs of Airpods or Beats headphones connected to your iPhone.

How to connect 2 pairs of Airpods to iPhone?

Press and hold the pairing button on the second Airpods or Beats until their indicator light pulses white. When the headphones appear in the Other Devices section of the menu, select them and wait for the connection. Your iPhone now has two pairs of Airpods or Beats headphones connected.

How to play music on 2 Airpods?

Sharing music with a second pair of Airpods.

• Place the headphones near your iPhone and open the lid of the case.
• Go to Control Center → Music Control.
• Click on the AirPlay icon and select two headphones from the list to play.

Use phone

When a call comes in and you’re wearing either an AirPod, Siri can announce the call. Double tap to answer. Later, you can double tap to hang up or switch to another call.

On your iOS device

• Open the Control Center.
• Deep press or tap and hold on the sound card in the upper right corner of the Control Center to control audio.
• Tap. and then select the desired device from the list. 1

Manage your device

You can use your Airpods to use Siri and control the playback of audio content.

With Airpods (2nd generation), by default you use Siri by saying “Hey Siri”. And when you double-tap the AirPod, you either play audio or skip ahead.

With Airpods (1st generation), by default, double tap to use Siri.

Regardless of which Airpods model you have, you can set each AirPod to make one of them when you double-click on it:

• Use Siri3
• Play and pause audio content
• Skip to the next track
• Return to the previous track
• Turn off your audio content

How to connect Airpods to iPhone 7

You can listen to music, make phone calls, use Siri, and more Airpods.

Use Siri

With Airpods (2nd generation), you can say “Hey Siri” or double-tap to use Siri. With Airpods (1st generation), double tap to use Siri.

You can use Siri with your Airpods to ask questions and make phone calls. Siri can also control music and check on your Airpods. Here are some examples of Siri requests:

• “Play my favorite playlist”.
• “Volume”.
• “How do I get home?”
• “Skip to the next song”.
• “Musical pause”.
• “How is the battery on my Airpods?”

Before you start

If you have Airpods (2nd generation), you need at least one of these:

If you have Airpods (1st generation) you need at least one of these:

• for iPhone, iPad or iPod with iOS 10 or later
• Apple Watch with watchOS 3 or later
• Apple TV with tvOS 11 or later
• Mac with macOS Sierra or later

On your mac

Press the volume button in the menu bar and select your Airpods 2 or other speakers under the output device.

Listen Airpods

When you take your Airpods out of the case, they’re ready to use. When you put them in your ears, your Airpods will automatically play audio from your device. If you take AirPod out, audio pauses. Take them both and the audio stops. If you are listening with one AirPod and you pick it up, the AirPod pauses. If you put it back in your ear within 15 seconds, playback will automatically resume.

Airpods are connected to your iPhone and Apple Watch at the same time. Sound automatically switches between them.

Follow these steps to use your Airpods to play audio from another device, or switch audio from different headphones or speakers.

What to do if headphones don’t connect automatically

Sometimes connecting a wireless device to newer iPhones shouldn’t be difficult. However, a situation may turn out when the headphones and the phone do not want to be friends.

If this happens, you need to follow the steps described in the second part of our article, that is, press and hold the button on the headphone case and wait until the connection screen appears on the screen.

• Incompatible software version. The point is that a specific version of Airpods will only work with specific phone models. If your phone does not have a suitable assembly, download and install it on your phone.

• Insufficient battery power in the device. The headphones may turn off due to insufficient charge. Therefore, in order to exclude breakage, then insert them for a while in the case and see if there is a reaction.

Connecting used or found Airpods

If the situation arises that you have come across used headphones, or worst of all, you found them on the street, and they most likely worked with another phone under a different Apple ID. Now we need to re-bind them to our device.

Apple devices must be linked to Apple ID.

Usually, before selling them, they are decoupled from this system. However, this does not always happen, and then problems may arise.

If this happened with Airpods, then we perform the following sequence of actions:

• We remove the phone from the lock and combine it as closely as possible with the open headphone case.
• At this time, a window with an animation should appear on the phone screen. Most likely, there will be a conflict of devices and the message “Not your Airpods” will appear on the screen.
• After that, click “Connect” with your finger.
• After the actions performed in paragraph 1, the system will prompt us to press and hold the button on the case. Fulfill this request.
• After a while, the process of “Connecting” the headphones to the mobile phone will begin. Then everything happens exactly as in the first part of the article.

If you use several Apple devices, they have the same Apple ID and are signed in to iCloud, then all Airpods will be available on both devices.

The process of switching between headphones will take place in the “Control Center”.

How to connect Airpods to iPhone: no problem

All kind and sunny day. Those who do not know me yet, my name is Fedor Lykov, and I am the creator of this resource, with the help of which I help to understand complex issues and make them simple. Today I will tell you how to connect Airpods to iPhone.

Proceeding from the fact that modern technologies do not stand still, wireless devices for various phone models have long appeared on the markets. The first were Airpods for the iPhone. Connecting them to an Apple device has a number of nuances, so I propose to figure out how to connect Airpods to an iPhone.

However, wireless headphones are not the only device that can work with a phone using Bluetooth technology.

For example, not so long ago we figured out how to connect dualshock 4 to an Android phone.

Well, now let’s build a sequence of actions that will lead us to success in the case of airpods.

Just Bought Headphones: How to Connect Airpods to iPhone 11

Typically new wireless devices connect in a semi-automatic mode. This process is started by pressing a button on the smartphone screen.

This will open the phone’s home screen. Next, you need to place these two products as close to each other as possible and do not forget to open the case cover.

After establishing a contact, a small window will appear on the screen where you need to click the “Connect” link.

Now you need to wait a while until the process ends completely.

Most often, the execution time for this action does not exceed a few seconds. When it’s over, the screen will be able to allow “Announce messages with Siri” (a voice assistant designed for iPhone phones).

However, this is not a required step and can be skipped at this stage and performed later. To do this, click on the link “Not now”.

If you own Airpods 2 or Airpods Pro, then when you set up the Hey Siri function on your phone, you can use it right away. Otherwise, you will have to go to the “Settings Wizard”.

The appearance of a window with an animation of Airpods symbolizes the end of the connection. The charge level of the headphones themselves and the case for storing them will be shown here. Click ready, turn on the music on your phone and enjoy.

If you are using the Airpods Pro model of headphones, then after this window you will be prompted to check if the headphones fit properly to your ears. If the check is negative, then you will have to replace them with a more suitable size.

The instructions on the screen will guide you through these steps. All you have to do is complete all the actions without deviating a single step.

Now we know how to connect Airpods to iPhone 10 and can do it quickly without spending a lot of effort. We also gained an understanding of how to get around such pitfalls as a linked Apple ID.

I hope I was able to help you make another difficult question easy to understand. By following all my advice, you will become more knowledgeable in the specific issues of mobile and computer technology.

Write in the Комментарии и мнения владельцев how many Airpods did you lose last year? I have heard that they are often lost, which means that the above information will be useful to you.

Well, by tradition, I ask new readers to subscribe to blog updates. This will keep you from missing out on good content.

You have to start over?

First of all, as a reminder, if you screwed up Turn on any part of the pairing process, don’t panic. it will happen!

Place the headphones in the dock, open the case, and then press and hold the button on the back for 15 seconds until the LED flashes amber. This restores the Airpods to default settings and allows you to restart the pairing process.

After that you can start again from the first step.

How to connect Airpods to iPhone

Apple’s marketing department will make you believe that its hardware and software works like magic. Luckily, setting up your Airpods or Airpods Pro is really quite easy, especially if you’re connecting them to an iPhone or iPad. But we’ve got step-by-step instructions in case you get stuck, as well as additional tips for getting the most out of your true wireless headphones.

And if you need advice on how to connect your Airpods to your Android or Mac phone, we have that too.

• 1. Prepare your devices
• 2. Connection screen
• 3. Media control
• 4. Noise control
• 5. Control center
• 6. Announcement of messages using Siri
• 7. Airpods get a default name
• 8. Bluetooth device list
• 9. Airpods Pro Settings
• 10. Noise reduction settings
• 11. Controls on the ear
• 12. Siri and Noise Control Settings
• 13. Secure fit
• 14. Microphone settings
• 15. Need to start over?
• 16.How to Connect Airpods to Android Phone
• additional literature
• Headphone Reviews
• Best headphones

Secure fit

The next field is to check the fit of the earmolds. Your phone analyzes how well the Airpods Pro fit in your ears and tells you if you need to adjust or replace the earbuds with a different size. small, medium and large silicone eartips included.

After clicking Continue, you will see a screen with a play arrow at the bottom. Pressing it plays a few seconds of music, during which a simple message is displayed: Do not remove the Airpods.

If the test determines that the Airpods do not fit, you are prompted to adjust or try a different earmold. If everything goes as it should, you will receive a Good Print message instead. Each earphone is tested independently.

Replacing the earbuds is a simple process if you need to. A quick turn and dash rips them off, and they just press down on them just as easily with a light, reassuring snap.

Siri and Noise Control Settings

Remember, you can make one ear do one while pressing and holding the other can do something else.

Here we set up the right earbud to switch between noise canceling and transparency. You can add Off to the rotation with or without removing one of the other parameters.

You will learn how to best customize things to suit your style. If you never use Siri, you can dedicate the controls to noise canceling. Conversely, if you love Siri and always want noise canceling to be on, you can set up both earbuds to launch the virtual assistant. The choice is yours and remember that you can program each earbud independently.

Airpods Pro Settings

Pressing the “i” button next to Airpods open the settings menu. At the top of this menu, you have two options, Disconnect and Forget This Device, both of which you can simply ignore.

Below the first field is the Name. Maybe you want to spice things up and instead of Steven’s Airpods Pro you want these Airpods to be called Escape Pods or TidePods, or well, you get the idea.

Just remove the current name and enter a replacement. As you can see, returning to the previous screen by navigating with the back arrow in the upper left corner of the screen, your Airpods now have the name of your choice. in our case, we renamed them to Escape Pods.

Media control

A media control screen pops up to tell you what to do with play / pause, skip a track, or go back to the previous song in your playlist. They are performed with the appropriate single, double and triple strikes on the headphone rods (they are the active control surface).

Announcing messages with Siri

On the next screen, you will be asked to choose between announcing messages using Siri or Not Now.

If you turn it on, Siri can read your incoming text messages when your phone is locked, and then listen to your response without saying, “Hey Siri. “

If you like it, subscribe. If not, click “Not now”.

Noise canceling settings

The next box (for Airpods Pro) should look familiar. it’s the same as what you see when you press and hold the volume fader on the Control Center screen to turn full noise cancellation on or off.

Transparency uses noise canceling microphones to help you hear yourself better during a conference call or better understand your surroundings, such as while jogging.

How to connect Apple Airpods 2 with Iphone 7 (manual pairing mode setup)

How to connect Airpods to Xiaomi?

There is a small button on the back of the charging case, press and hold it for a few seconds. As soon as the indicator between the earbuds starts flashing white, release the button. Airpods will appear in the pairing menu on your device, select them and follow all further instructions. May 17, 2019.

How to connect headphones from iPhone to another phone?

The first step is to make sure all headphones are in the carrying case. Then, keep the cover open and hold the button on the back of the case until the indicator flashes white. On the device on which you plan to play music, go to the Bluetooth settings and connect to the Airpods device.

How to connect Airpods to Windows 7?

• Put your Airpods in pairing mode.
• Pair your Airpods with your computer.
• In Windows 7 and 8.1, you can go to Control Panel. Devices and Printers. Add a device and also connect to Airpods.
• Turn on audio output and microphone from Airpods.

How to connect a Bluetooth headset on Windows 7?

First of all, make sure your Windows 7 computer is Bluetooth enabled.

• Turn on the Bluetooth device and make it discoverable.
• Select Start Devices and Printers.
• Select Add a device, select a device and click Next.
• Follow the instructions that appear on the screen.

What to do if Airpods won’t connect to your phone?

If Airpods won’t connect, press and hold the setup button on the back of the case. Hold the setup button until the status light flashes white, then amber, and then solid white. Open the case that contains the Airpods and place it next to your iPhone.

How to connect Airpods to Windows?

Make sure Bluetooth is turned on. Place both Airpods in the charging case and open the lid. Press and hold the setting button on the back of the case until the status light flashes white. Select Airpods in the list of devices and click the “Connect” button.

Is it possible to connect headphones from iPhone to computer?

For wireless headphones to work, your computer must have a built-in or external Bluetooth module. To connect, make sure it is activated, turn on the headphones, and then go to Bluetooth settings. Wait for the system to detect the headphones, find them in the list and click “Connect“.

Can Airpods Connect to PlayStation 4?

Yes, wireless Airpods Pro can be used quite normally with the PlayStation 4 and PlayStation 4 Pro game consoles. Of course, due to the fact that the PlayStation 4 does not provide direct support for Bluetooth headphones and headsets at all, then Airpods Pro cannot be directly connected to it. Need a special bluetooth adapter.

Why the computer does not see the Bluetooth headset?

And if the laptop does not see Bluetooth headphones (or whatever you are trying to connect there), then most likely the problem is on the side of the headphones themselves. It happens that the module itself is disabled, or the drivers are not installed (then there will be no tray icon). If there is an arrow next to the icon, then it is disabled. Right click and enable.

How to connect Airpods to Xiaomi?

There is a small button on the back of the charging case, press and hold it for a few seconds. As soon as the indicator between the earbuds flashes white, release the button. Airpods will appear in the pairing menu on your device, select them and follow all further instructions.

How to connect Airpods to each other?

On your iPhone, go to the Home screen. Open the case that contains your Airpods and place it next to your iPhone. The iPhone displays a setup animation. Click “Connect” and select “Finish”.

How to connect Airpods 2 to Windows 10 laptop?

How to reconnect or disconnect Airpods from your PC

• Open the Settings app in Windows 10.
• Select Devices.
• Scroll down to the Audio section and select your Airpods.
• At the prompt that appears, click Connect. Your Airpods should now be working.

Can Airpods Pro connect to laptop?

How to connect Airpods to a Windows computer or laptop. Can Airpods be used with a Windows 10, 8.1, or Windows 7 computer? Yes, you can: it is enough that the computer or laptop has a Bluetooth adapter, and it works properly. after connecting Airpods, they can be used as headphones with a microphone.

How to connect Xiaomi Redmi AirDots?

• Press the buttons on both earbuds until a red light appears.
• Place the headset in the charging case.
• Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
• When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made.

Airpods: what is it?

The convenience of Airpods isn’t just wire-free and easy to use. The new headphones are a different format for interacting with Apple gadgets. So, in order to stop playback, you just need to pull one earphone out of your ear. To resume, insert it back. Double-tapping the earphone calls up the Siri voice assistant. With the help of Airpods, Siri will dial the necessary contact, get directions, turn on “that very song”, and answer a bunch of questions.

A protective charging case with a built-in battery is provided for storing the device. One charge is enough to recharge the earbuds for 24 hours. The headphones themselves hold up to 5 hours of listening to music and up to 3 hours of talk time.

In order to receive an incoming call, you need to double-tap the earpiece. Everything is extremely simple and intuitive. It’s even easier to figure out how to connect Airpods iPhone and iPad. By the way, with some restrictions, even the second generation Airpods work with iPhone 5s and iPad mini 2. “Audio Sharing” will not be available in these models.

How to connect Airpods to iPhone and iPad

Apple makes things really simple for life. See how easy it is to connect headphones to iPhone.

• On iPhone, go to the Home screen.
• We bring the open case with the headphones to the iPhone.
• An animation with a smartphone image and a “Connect” button will appear on the smartphone screen.
• Click “Connect”, if you have Airpods Pro, read the instructions on the screen and click “Finish”.
• The headphones can then be used with the iPhone.
• For iPad, the procedure is the same:
• Go to the Home screen.
• Bring the open case with the headphones to the iPad.
• Then follow the instructions on the screen and click “Finish”.

After that, in order to start listening to music on headphones, just insert them into your ears and start playback.

How to connect two pairs of Airpods to iPhone and iPad

If you want to listen to music or watch a movie on iPhone iPad together, then it is most convenient to connect two headsets, and this is just as easy.

• To connect a second pair of headphones to iPhone and iPad, go to “Settings”, “Bluetooth”.
• Open the second case with headphones, without removing them, hold the setting button on the back of the case until a blinking white indicator.
• After that, the second Airpods will appear in the list of available Bluetooth devices in the iPhone or iPad.
• Select them and the sound from the device is transmitted to both pairs of headphones.

For all Airpods 2 and Airpods Pro models, the setup instructions are the same.

How to connect Apple Airpods to iPhone

Apple introduced its Airpods wireless earbuds with a lot of qualities. And for good reason: these headphones offer great sound, true wireless connectivity, fit perfectly in your ears, and support advanced features like Siri and automatic sound balancing when you take one out and leave the other in your ear.

If you’ve already purchased Airpods, you’ll love them. However, with such a baggage of functions, there is a lot to learn. This article covers the basics like connecting and setting up your Airpods for more advanced features like changing the settings themselves and even using them with third-party gadgets.

Requirements for using Airpods

To use Apple Airpods, you need:

If you meet these requirements, learn how to set up and use Apple Airpods. Do not forget to read “How to check the battery charge of Airpods headphones”.

How to connect Apple Airpods to iPhone and iPad

One of the things that makes Apple Airpods so powerful and so easy to use is the W1 chip built into them. The W1 supports a lot of Airpods features, but one of the most convenient ones is setting them up. Apple designed Airpods to connect quickly and even easier than other Bluetooth devices, so it should be simple. Also find out “How to turn up the volume on Airpods”.

To pair Airpods, activate Bluetooth on your iOS device by opening Control Center, then tap the Bluetooth icon to turn it on.

Hold your Airpods case. with Airpods in it. one or two centimeters from your iPhone or iPad, then open the case.

Press and hold the button on the Airpods case.

Follow the instructions on the screen. Most likely, this will be associated with clicking the “Connect” button.

Your Airpods will be automatically configured to work with every device connected to the same iCloud account used on the device you set them up on.

Connecting Headphones to iPhone

We take the branded package with Airpods and carefully open it with a stationery knife or scissors, take out the case and place it near the iPhone. Then we perform the following actions:

Remove the Airpods from the case. As soon as we insert into the ears, playback begins. If we want to pause the sound. we take out one earphone, if we stop completely. both.

Connecting Airpods Wireless Headphones to iPhone

Unlock iPhone. Next to it, open the charging case with the “drops” inside.

An image of Airpods appears on the iPhone screen. Click the “Configure” and then “Finish” buttons.

The first pairing is ready. If an iCloud profile is connected on the smartphone, then after the first pairing, the settings for all other Apple products that support AirPods and are connected to this iCloud profile will be saved.

How to connect Airpods to iPhone

Airpods were first introduced to the public with the launch of the iPhone 7 and Apple Watch Series 2. They are sold separately from compatible gadgets, and even Apple’s latest top model, the iPhone XS Max, cannot boast Airpods included.

And now, when the Apple wireless headset is in your hands, a quite reasonable question appears: how to connect Airpods to iPhone?

• Compatible iPhones
• Connecting Airpods Wireless Headphones to iPhone
• Answers to popular questions

How to distinguish original from fake

Here are some tips to help you distinguish genuine Apple headphones from fake ones:

• Price. The first thing to look out for when buying. Obviously, original Airpods cost a lot more than third-party ones;
• Packaging and case. Take a close look at the cover, it should be pure white, made of high-quality plastic, and be smooth. If this is not the case, you can be sure that you have a fake in your hands;
• Headphone color. This is the easiest way to distinguish an original from a fake. Original Airpods are available in white only;
• Build quality. The original headphones consist of three parts that are precisely connected to each other without unnecessary plastic. Also, compared to the fake, they look sturdier, better quality and heavier (due to the premium build quality);
• Comfortable to wear. Try inserting Airpods into your ear. Earphones from Apple should fit neatly under the ear cavity, should not fall out;
• Headphone control. The original ones do not have buttons. For control, they have built-in optical sensors and accelerometers of motion and voice;
• Company logo and other designations. Apple’s original case doesn’t have their logo on it. Also, there should be no other inscriptions. On the headphones themselves, there should be only the letters L and R, which show which headphone is right and which is left;
• Sound quality. The headphones are designed to produce the best possible sound using their own design. This design guarantees deeper lows and crisp highs when listening to music. If the sound quality seems low to you, then this is a direct indicator that the headphones are fake;
• Microphone quality. Among other things, checking the quality of a microphone is an easy way to tell if your product is original or not. Usually people do not pay attention to such a detail, but it is enough just to call a friend and ask if he hears your voice loudly and clearly, is there any extraneous noise.

How to connect headphones to another iPnone

If you wanted to listen to music on another iPhone, then when you place the case next to this device, instead of the inscription “Connect”, “Not your Airpods” will appear. What to do about it? To connect you need:

• Place the headphones in the case
• Open the cover of the case
• Press and hold the button located on the back of the case until the indicator on it flashes white

Further, as in the previous paragraph. we see the animation, select “Connect” and “Finish”

Connect to two different devices at the same time

Airpods can be used in parallel with two devices. To establish such a connection, follow the instructions below:

• Take both earbuds out of the case, connect with the first iPhone.
• After that, hide one earphone in the case, connect the other to the second smartphone.

Possible problems with Airpods

Users of Apple technology rarely have problems, but if something went wrong, do not worry too much, most often the problem is solved very quickly. Let’s consider the most common options.

If your wireless headset does not automatically pair with your device, you should take the following steps:

• Check if the Bluetooth module is enabled on the connected device.
• Place the Airpods case closer, about 5 cm apart.
• Try disabling and re-enabling your wireless adapter.
• Open the case and hold down the service button located on the back of the case. Hold it down until the indicator light comes on inside the case between the headphone jacks. This will signal that the settings have been reset and the gadget is ready for initial pairing.
• Another common reason for a lack of connectivity is a discharged headset or case. If the connection is successful, a charge will appear on the smartphone screen separately for the case and for the headset. Later, this information can be viewed in the battery widgets or simply ask the battery level from Siri.

If one earphone does not work, our article will help you.

Connection process

Pairing Airpods with newer iPhones is surprisingly easy. Take your iOS device and case. You can connect Airpods to iPhone as follows:

• Unlock the iPhone that you want to connect to a pair of Airpods and go to the home screen (where you can see all the application icons);
• Open the case with the headphones without taking them out and hold it near the iPhone;
• Wait for the iPhone to detect Airpods and click “Connect”;
• Click Finish.

How to Pair Airpods with iPhone 7. Bluetooth

Airpods are connected and ready to go. Also, if you use the same Apple ID and iCloud account on multiple devices, Airpods will automatically set up to work with them.

Airpods not connecting to iOS or not installed correctly? What to do?

If for some reason your headphones won’t connect or sync with the iPhone after the setup process above, you’ll need to hold down the setup button on your Airpods and try again. You should also do this if you are connecting the headphones to another iPhone:

• Place the earbuds in the case if you haven’t already;
• Press and hold the install button on the back of the Airpods Charging Case for 18 seconds, or until the charging light blinks orange and then white;
• Repeat the initial installation process outlined above in the article.

It’s also worth mentioning that while Airpods should come with the latest software installed, they should be updated if possible.

The Airpods are now connected and ready to work with your iPhone, iPad, Mac, or other Apple device. Using them is very simple, just double-tap your headphones to call Siri, answer a phone call, control music.

How to Automatically Connect Airpods to Any iPhone

Airpods are Apple’s new wireless earbuds. They make it possible to interact with Siri, music and audio, and answer calls. They are popular with iPhone users, but work with most iOS devices.

When you buy a new pair of headphones, you might be wondering how to connect it to your iPhone. It turns out that everything is simple. Most of the process is automated. Don’t worry if something goes wrong.

Before starting, make sure your Airpods are charged (they usually come with a charged battery) and that the device you want to sync them with is compatible. If you’re not sure, below you can see the supported devices, but almost all modern Apple products will work with Airpods.

How to distinguish original from fake

Here are some tips to help you distinguish genuine Apple headphones from fake ones:

• Price. The first thing to look out for when buying. Obviously, original Airpods cost a lot more than those made by a third party;
• Packaging and case. Take a close look at the cover, it should be pure white, made of high-quality plastic, and be smooth. If this is not the case, you can be sure that you have a fake in your hands;
• Headphone color. This is the easiest way to distinguish an original from a fake. Original Airpods are available in white only;
• Build quality. The original headphones consist of three parts that are precisely connected to each other without unnecessary plastic. Also, compared to the fake, they look sturdier, better quality and heavier (due to the premium build quality);
• Comfortable to wear. Try inserting Airpods into your ear. Earphones from Apple should fit neatly under the ear cavity, should not fall out;
• Headphone control. The original ones do not have buttons. For control, they have built-in optical sensors and accelerometers of motion and voice;
• Company logo and other designations. Apple’s original case doesn’t have their logo on it. Also, there should be no other inscriptions. On the headphones themselves, there should be only the letters L and R, which show which headphone is right and which is left;
• Sound quality. The headphones are designed to produce the best possible sound using their own design. This design guarantees deeper lows and crisp highs when listening to music. If the sound quality seems low to you, then this is a direct indicator that the headphones are fake;
• Microphone quality. Among other things, checking the quality of a microphone is an easy way to tell if your product is original or not. Usually people do not pay attention to such a detail, but it is enough just to call a friend and ask if he hears your voice loudly and clearly, is there any extraneous noise.

Compatibility and supported devices

Airpods work with iPhone, iPad, iPod touch, Mac, Apple Watch, and Apple TV, but all of these devices are assumed to have the latest software. The connection is via Bluethoth. The headphones are compatible with the following devices and software versions:

• iPhone (4, 4s, 5, 5s, 6, 7, 8, X), iPad, iPod touch, starting with iOS 10 and later;
• Mac running macOS Sierra 10.12.3 and later
• Apple Watch with watchOS 3
• Apple TV with tvOS11.

As such, they are compatible with all current versions of Apple’s software. If the device is completely new, then it will work with these headphones, and even older devices are easy to connect if they have the software mentioned above installed.

How to clean your headphones

Spending over 10,000 rubles on headphones is not such an easy decision. And if you did buy Airpods, do not forget to take care of them, and then they will not have to be changed along with the new iPhone upgrade. After all, in the end, you will not just store them in a case. So here are some tips on how to clean your Airpods.

Dirt, dust, lint, earwax, and more easily spill onto the glossy white surface of Airpods, and you’ll need to clean your headphones from time to time. It is best to do this consistently so that dirt does not accumulate.

So you can clean your headphones from dirt, and in order to keep their appearance for a long time, do not be lazy and follow the tips below.

• Polish your Airpods with a microfiber cloth from time to time to keep the color bright and the surface shiny;
• Don’t forget about ear hygiene;
• If you do not use headphones, store them in a special case;
• Try to make sure that only you use your headphones. This advice also applies to hygiene.