How to connect Airpods to iPhone

Table of Contents

One Airpod is quieter than the other

  • One of the headphones is discharged. Need to put the headset in the charging case.
  • Check that the holes are clean and not stained, and there is no debris on the screens. If there is contamination, then it is necessary to carefully clean the device with a brush.
  • Be sure to check volume settings on iPhone.

Reference! If the sound quality remains poor, you hear clicks, whistles, squeaks, we recommend taking the headset to a service center for repair.

Simple ways

There are two ways to pair any wireless headset with an iPhone:

  • Bluetooth settings,
  • Automatically.

The process of connecting Airpods does not take much time and comes down to simple instructions:

  • First, the user must turn on Bluetooth. To do this, you need to slide your finger across the screen from bottom to top (in the locked state),
  • Click on the pictogram of the same name,
  • Turn on the device,
  • Airpods will be automatically connected to the smartphone.

How to setup Airpods on iPhone & Mac!

If the wireless headphones are not from Apple, then the device should be connected through the settings:

  • You need to get the “plugs” out of the case and, if necessary, turn on.
  • Wait for them to connect to each other.
  • Then on the phone go to “Settings” and select “Bluetooth”.
  • Turn on Bluetooth.
  • Start searching for other devices.
  • Find the name of the gadget in the list of available devices, and start the connection.

After the headset is connected, the user can exit the settings and play music. If the device was connected correctly, the corresponding icon will be in the upper right corner of the screen. Some models transmit information about battery charging.

Not determined

Sometimes Airpods, Freebuds, Mi AirDots or other branded headphones are not detected by the iPhone.

In this case, we follow the step-by-step instructions:

  • Check if Bluetooth has turned on on iPhone.
  • Restart the wireless system. turn off and then turn on the “plugs”.
  • Make sure the headset is well charged.
  • Check the compatibility of your phone and headset. In some cases (on new models of Airpods), to connect a wireless device, the operating system must be at least iOs 7.
  • Make sure that there are no devices nearby that can intercept the signal. laptop, MacBook, candy bar, other smartphone with synchronization enabled.
  • In rare cases, powerful Wi-Fi routers can interfere with connections. move to a safe distance (5-10 meters).

Pairing occurs, but no sound or poor sound

In this case, we are talking about a poor-quality headset or a sudden interruption of the signal.

If the problem is a bad signal, follow the instructions:

  • Restart headphones.
  • Disconnect the headset for about 30 seconds and only then reconnect.
  • Shorten the distance between the smartphone and the wireless headset. Long distance may interfere with the connection.
  • Disable extraneous Bluetooth devices.

Cheap Chinese knockoffs refuse to work

The phone can see the headset, but recognize them as two different devices. Sound quality issues very often occur, or the iPhone does not pair with the Chinese counterfeit at all.

  • First, you need to connect the headphones to each other (each model has its own instructions. read the manual), and only after that to the smartphone.
  • Reboot both devices.
  • Reset Bluetooth settings.

Connection issues after upgrade

Very rarely, there is a synchronization problem after installing a new version of iOs on the iPhone.

  • Restart Bluetooth first and re-pair,
  • Ideally, restart your smartphone,
  • Remove all major sources of interference that might interrupt or interfere with the signal.
  • Open the case next to the phone. A corresponding prompt should appear on the display.
  • Try connecting another wireless headset to your iPhone. If this does not help and there is still no connection, we recommend contacting technical support.

Headset runs out of battery quickly

Li-ion battery has a limited shelf life, usually 300-400 charge-discharge cycles or 3-4 years of active use. Over time, the autonomy of Airpods is greatly reduced. For old technology, there is only one way out, contacting the service to replace the built-in battery.

connect, Airpods, iphone

If the user has Airpods, then you can try to increase the battery life. Those. enable the auto-detect ear function. With the help of an infrared sensor, the headphones will understand when the user takes them out of their ears, they will automatically turn off. This will help conserve battery power. To activate the function, you need:

  • Open “Settings”.
  • Select “Bluetooth”.
  • Then “Airpods”.
  • Turn on the toggle switch “Auto-detect ear”.

If the headset is not native, then it can be returned under warranty or taken to a service center to replace the battery.

Before connecting accessories, with the section “Questions and Answers”.

NFC. it is a wireless technology that helps to exchange data between different devices.

The aLGorithm for connecting headphones with an NFC chip to an iPhone is quite simple and includes several steps. This feature is present on all iPhone models older than 5.

  • If the option is not activated, you need to go to the settings and, opposite NFC, move the slider to the right.
  • Then you need to touch the back of the phone to the NFC icon on the wireless headset.
  • Allow the connection. There will be a connection between the devices.

This function works on gadgets with iOs above 13.1. As for the headset, not only Airpods are supported, but also some models.

The first option for simultaneous connection using the “Share audio” option.

Instructions on how to output sound to the second set in a case:

  • Connect one Airpods to iPhone. The second should be in the case.
  • When listening to music on Airpods, you need to bring the phone to an open case with another set.
  • A menu will open where you need to select “Temporarily share audio”. Confirm action.

Connecting second headphones without case:

  • Connect some “plugs” to the iPhone and put them on.
  • Open AirPlay from the lock screen and share audio.
  • Bring your phone to another device and click “Share Audio”.
  • Confirm connection on the second gadget.

The second way to bind with manual configuration.

  • Connect one headset to iOs.
  • Launch settings and then go to Bluetooth.
  • Open the case with the second set and hold the connect button until the indicator starts flashing.
  • Wait for the headset to appear in the “Other devices” section.

Bluetooth has a maximum transmission range of about twenty meters. But do not exclude the influence of interference from other objects, which can reduce the range of Bluetooth operation.

If the headphones are working properly, but there is a problem with the volume control. In Airpods, all default settings, including changing the volume, were transferred to the voice assistant Siri. To control the sound level, just tell Siri to turn down or turn up the volume.

You can just say: “Siri, volume at maximum.” You can also adjust the sound as a percentage. You need to name a specific number and the command will be executed. It is important to remember that the system will pause the music before turning up the volume.

Reference! Sound control available through Apple Watch.

3 ways to connect any wireless earbuds to iPhone

Airpods and lesser-known plugs are only gaining popularity with the development of streaming and music services. But sometimes, users are faced with the problem of how to properly synchronize devices. Therefore, let’s figure out in detail how to connect wireless headphones to an iPhone. In parallel, we will consider the main problems.

The manual is universal and suitable for all iPhone models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max.


As you know, Airpods are endowed with touch controls, to which you can assign different functions separately for each earphone or the same for both. At the same time, interaction with them in the models of the first, second generation and Pro is carried out in different ways, and in the latter, three noise reduction modes are also implemented. Comfortable use of the accessory is possible only if it is correctly configured; a separate article on our website will help you to accomplish it.

How to connect Airpods to iPhone

Airpods wireless headphones are the no-compromise solution for iPhone, not only delivering sound quality, but also the most comfortable experience. Usually, connecting this accessory to a smartphone is done in a few simple steps and takes less than a minute.

Important! To connect the first generation Airpods to the iPhone, it must have an iOS version of at least 10, for the second. 12.2 and higher, for Airpods Pro. the version must be 13.2 and newer.

Used or “forgotten” device

If you purchased a used accessory or previously used it with another Apple device (which is more important in this case, under a different Apple ID), the connection aLGorithm will be slightly different.

Read more:  How to sign in to iCloud from iPhone

    Bring the open headphone case as close to your iPhone (unlocked and on the home screen) as possible. Wait for the animation window to appear. Most likely, it will say “Not your Airpods”, tap the words “Connect”.

Perform the suggested action on the screen. “Press and hold the button on the back of the charging case”.

After a few seconds, the “Connection” of the accessory to the smartphone will start. Further actions do not differ from those in the last paragraph of the previous part of the article.

If you have more than one Apple device, share the same Apple ID, and are signed in to iCloud, your connected Airpods will be available on either device. You can switch between playback devices in the “Control Center”.

New device

Connecting new Airpods to the iPhone is usually performed in a semi-automatic mode and requires pressing just one button on the screen.

  • On your phone, open the home screen, bring the headphone case as close as possible and open it.
  • In the window that appears with animation, tap “Connect”.

Usually this procedure takes a few seconds, after which it will be possible to allow “Announce messages with Siri” (the voice assistant will read out incoming messages), but you can skip this by clicking “Not now”.

Note: If you have second generation Airpods or a Pro model and have Hey Siri set up on your iPhone, you can use it with your headphones. Otherwise, the Configuration Wizard will open.

As soon as you see a window with an animated image of Airpods and their case, as well as the charge level of each of these elements, the connection process can be considered complete. Tap “Done” and insert the headphones into your ears. they are ready to use.

If the Airpods Pro model is connected to the iPhone, you will additionally be prompted to check if the ear pads you are using fit correctly to your ears and, if necessary, replace them with a more suitable size. To do this, simply follow the instructions on the screen.

If the headphones won’t connect

As mentioned above, there should be no problems with connecting new, previously unused Airpods to the iPhone. And yet, if the headphones do not pair, you need to follow the steps described in the second paragraph of the “Option 2” part of this article. press and hold the button on the back of the case for a few seconds (after opening it) until a dialog appears on the smartphone screen connections. For more serious problems, check out the guide below for how to find possible causes and how to fix them.

Now you know how to connect Airpods to iPhone and how to set them up for a more comfortable use.

Connecting Two Airpods to One iPhone

Connect the first pair of headphones to your smartphone using the method described above.

Open iPhone settings and go to Bluetooth settings.

Press the pairing button on the second headset until they appear on the phone in other devices. Immediately after that, just click on them.

Interesting! You can set up one earbud to work on one iPhone and the other on the other. Just take out one and pair with one smartphone, put it back in the case, and then take out the other and set up in the same way on the other phone.

What to do if Airpods do not connect

Check the IOS version, it must be at least 12.2. And the best thing is to upgrade to the newest one right away. they fix most of the problems that may arise when connecting.

See if Bluetooth is enabled on your phone by swiping from the bottom to the top of the screen.

Place the plugs inside the case and close it for 15 seconds. Also see if charging is in progress. Read more about this in the article. How to charge Airpods.

After the headphones have been in the case for 15 seconds, when you take them out, the indicator should light up white. This means they are ready to connect.

Open the case with Airpods inside and place it next to the unlocked iPhone. Then follow the instructions on the smartphone screen.

You can try to remove the headset from the list of Bluetooth devices in the phone settings. And then add again.

Reset the Airpods headphones, for this:

  • Place the plugs inside the case for 30 seconds
  • Open the case, place it next to the iPhone. Go to the bluetooth settings on your phone and remove the headset by clicking on “Forget device”
  • On an open case with headphones inside, hold down the button for 15 seconds until the indicator flashes yellow
  • Close the lid for 15 seconds, open it and place it next to the phone, then follow the instructions on the screen

How to connect Airpods to iPhone. quickly and easily

Airpods wireless earbuds are among the most popular TWS models ever released. All this thanks to good sound quality and ease of use.

But, it is not always clear how to connect them to your iPhone, since the process at first glance is slightly different from other models. In reality, everything is easy and you will love it.

The last post was about how to connect wireless headphones to an iPhone. Today we will take a closer look at this process on headphones from Apple themselves and you will learn how to easily and quickly connect Airpods to your iPhone.

Interesting! Airpods let you fully control your phone through Siri voice assistant, make calls, listen to music, use your smartphone as a baby sitter, and more.

Playback control

There is a special pressure sensor on the body of the earbuds, it is through pressing on it that you can control playback.

  • One press. pause and play
  • Double tap. switch to the next track
  • Triple tap. go to the previous song
  • Say “Hello Siri” and give her a command to control other functions such as volume.

In the first generation Airpods, Siri launches with a double tap.

How to set up Airpods

We have already considered in detail in the article about how to use Airpods, but here this information will not be superfluous either.

Place the open case with inserts inside next to the smartphone.

Open the settings and go to “Bluetooth”. Click on the exclamation mark icon on your headset.

Here you can change a number of parameters, for example, change the action when you press the sensor of the earbud, disable the function of playing music only when the earbud is in your ear, and others.

Nuances in use

The sound will start playing as soon as you insert the earbuds into your ears. If one of them is removed, the playback will be paused. You can change this in the settings. read below.

If the settings are set to play from only one earphone. when you take it out of the ear, playback stops and, if you do not insert it back within 15 seconds, it will automatically start again. If not, then you will have to do it manually.

Do not store the earbuds outside the case when not in use, especially when empty. So they are easy to lose and it is better not to leave the battery on the earbuds without a charge, otherwise it will quickly become unusable.

If you are using Airpods Pro, it is recommended to use the correct size earbuds that do not cause discomfort. There are three of them in the kit to choose from.

To select the device from which you want to play music. Open the control center and hold down the music button, there click on the icon at the top right. Devices change here.

How to connect Airpods to iPhone

Make sure your phone has the latest IOS version 12 or higher. Since the developers are constantly changing and adding new functions and solving problems that were in the old versions with the Airpods connection.

If you do not want to update, if problems arise, you will still need to do this, because even technical support will tell you to update to exclude all possible problems.

Unlock your phone, open settings and turn on Bluetooth, or simply unfold the bottom curtain and turn it on. Then go to home screen.

Make sure the headset is charged. Open the case with the earbuds / earplugs inside and place it next to the phone. On the case, the indicator should light up white, this means that the headset is in connection mode.

An animated splash screen and a “Connect” button will appear on the iPhone. press it.

The charge of both the headphones and earbuds will be shown. So you can always see what it is. It is not shown on the case and inserts, you will have to look here or display a special widget on the screen with them.

Then follow the instructions that appear on the screen. It all depends on which version of Airpods you have: Pro, first or second generation. You may also need to set up to work with Siri.

After all the settings, click on “Finish”. That’s it, now you can use all the capabilities of your Airpods, just take them out of the case and insert them into your ears.

Interesting! Also, they can be connected to other smartphones, computer and laptop. about this. how to connect Airpods to Android.

How to connect a wireless speaker to iPhone

Be sure to charge the Bluetooth speaker before pairing / pairing and press the button on it.

Go to the phone settings and open the “Bluetooth” section, make the item of the same name active to start searching for devices.

Immediately after the column appears, select it from the list, if asked to enter a password, then you can find it on the column itself or on the box from it. often it is just. 0000.

If you encounter problems and do not play music. delete the added column in the same menu by clicking on “Forget device” and then adding again.

Interesting! You can check music playback and sound quality immediately. So you can easily decide before purchasing whether you like the sound quality or not.

How to connect wireless headphones to an iPhone

You can easily connect wireless headphones to an iPhone, regardless of their manufacturer, it is not necessary that they be branded from Apple.

It is easy to do this using Bluetooth wireless technology and easy configuration of its connection in the settings of your phone.

In the past article, you learned how to take a screenshot on an iPhone. Today we will talk about how to connect wireless headphones and speakers to iPhone via Bluetooth easily and quickly.

Read more:  How to Move Photos from Computer to iPhone

Interesting! Also, in a separate material there is detailed instructions on how to connect Airpods to iPhone easily and correctly.

Possible connection problems

  • If the connection is not established, then check if the device is paired with another phone or device. If yes, then disconnect and try again.
  • Make sure the Bluetooth button is turned on on your Bluetooth device.
  • Check the battery level again.
  • Delete the device and add it again in the Bluetooth settings. found gadgets.
  • If the headphones or speaker are not visible at all. Then most likely the device is simply not supported by the iPhone and nothing can be done.
  • It will not be superfluous to check if the headset works with other phones.

Important! There is no point in restarting the iPhone, you just delete all the data, and this will not solve the problem. If the gadget is not visible at all, and other smartphones recognize everything perfectly, then there is simply no support, you need to look at another option.

How to connect wireless headphones to iPhone

Charge your wireless bluetooth headphones and press the bluetooth enable button on them.

Open the smartphone settings, go to the section with the name “Bluetooth”, set the switch of the item of the same name to the active position and wait until the headset is found and displayed in the list below.

When the device is found, click on it to establish a connection. In rare cases, a PIN may be required, it is usually located on the headset itself or its box.

Immediately after connection, the sound will work from the headphones and, if there is a built-in microphone on the device, then conversations can be conducted through it, which is very convenient.

Interesting! If you have problems with playback or with pairing in general. in the same section, do “Forget device” by clicking on it and then adding it again. This often solves the problem.

Thus, you can connect any wireless headset to the iPhone. These can be overhead or plug-in options, from Xiaomi, Samsung, Honor or others.

How to restart Airpods?

With the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber.

How to set up sound in Airpods?

Improving Airpods Sound on iPhone and iPad

  • Go to Settings. Music. Equalizer.
  • Click on the item ” low”.
  • Never turn it off again.
  • In the top bar of iTunes, open the menu: Window. Equalizer
  • Select ” Low” from the dropdown menu.

How to untie Airpods from Icloud?

How to disconnect icloud from Airpods if you no longer have access to your phone?

  • Press the button on the headphone case for 5-10 seconds
  • Wait until the indicator stops blinking
  • All bindings will be erased, it was a factory reset

Why does the microphone not work on Airpods?

Before determining the cause of the broken Airpods microphone, check if the headphone output is working. To do this, you need to turn on the music; phone settings are down. If the microphone does not work for this very reason, it is enough to activate it by pressing the Mute key.

How to understand that Airpods are charging?

When the Airpods are in the case with the lid open, the indicator shows the charging status. If your Airpods are not in the case, an indicator light shows the status of the case. Green means it is fully charged and yellow means less than one full charge cycle remaining.

Why Airpods Failure to Connect?

What to do with the “Connection Failed” error when connecting Airpods? 1 Disable and re-enable Bluetooth. This can be done in the settings, or by opening the control point (as in the screenshot below). Then activate the connection mode on Airpods and try to reconnect them.

How to pair Airpods?

  • Go to the Home screen.
  • Open the case that contains the Airpods and place it next to the iPhone.
  • The iPhone displays a setup animation.
  • Click “Connect”.
  • If you have Airpods Pro, read the on-screen instructions.

How to turn on the microphone on Airpods?

Microphone setting: left, right or automatic. Tap Microphone, then choose the option you want. When the microphone is set to Automatic, any of the Airpods can be used as a microphone. If only one earphone is used, it will be the microphone.

How to adjust volume on Airpods?

The need for volume control is one of the first priorities. Often you want to increase or decrease the sound, and you want to do it in the most convenient and fast way.

This moment is a minus of these headphones and now you will understand why. There are two ways how you can change the volume on Airpods:

  • using the phone and its volume buttons;
  • using Siri: we call it by double tapping on the earpiece and then speak, increase or decrease the volume.

Not the most convenient solution, but this is the reality in this case and here you just need to get used to.


Connecting Airpods to iPhone

You’ve probably heard a lot about the magic of Apple. So, these words refer specifically to the connection of these wireless headphones to the iPhone.

The scheme is so simple that it is simpler and difficult to imagine:

  • unlock your iPhone to open the Home screen;
  • open the case with headphones and bring it closer to the smartphone;
  • a window appears on which you first select Connect, and then Finish;
  • we use.

Everything is ready to use and when you insert it into your ears, you will hear a characteristic sound. So we will rather turn on our favorite music or video to enjoy high-quality sound.

How to see the charge of Airpods in iPhone?

There are three ways to find out the charge level of Airpods headphones. Everything is quite simple, you just have to choose which one suits you best.

  • the headphones are in the case. we open it. we bring it to the phone. we see the charge level of the case and headphones;
  • you can just ask Siri: double-click on the earpiece and then ask: “What is the charge level of the Airpods?”;
  • go to the widgets page by scrolling to the right from the Home screen. scroll down to the bottom and press Change. look for the item Batteries. press the green plus sign opposite.

I most often use the third option, because it is the fastest. By the way, the charge level of the case can only be found in the first way.

How to rename Airpods?

When you connect your Airpods and then go to the list of connected devices, the name of your iPhone will be displayed in brackets.

  • go to Settings and click Bluetooth;
  • click on the circle with the letter “i” inside, it is located opposite the Airpods;
  • now we are looking for the line Name, click on it and write absolutely any name that you want.

Thus, you can write anything you want. So here you have to turn on your imagination, or leave everything as it is.

Airpods gestures: how to use / how to set up

If everything is clear with the controls on the EarPods, then how is everything implemented in Airpods? Apple decided to simply insert a sensor into each of the earbuds. When you tap on it twice, this or that action will be performed.

If you still do not understand what is at stake, then take one of the headphones in your hand. You see a small black dot (hole) on the side. this is the sensor. When you press it twice, it can switch or stop the track / video.

By standard, Siri is called in one earbud, and pause / play in the other. But how to customize everything for yourself:

  • go to Settings and select Bluetooth;
  • press the letter “i” in the circle, which is located directly opposite your Airpods;
  • we see the item Double tap Airpods and below the actions that you can change to your taste.

Bluetooth. i. Double tap Airpods

Everything is quite poor here and there are not so many actions. You’ve probably noticed that there is absolutely nothing in the list that even hinted at adjusting the volume. Let’s discuss this in the next paragraph.

Which iPhones are suitable for Airpods?

People often wonder about the compatibility of these headphones. And here the answer can be very short. all devices that work on iOS 10 and higher.

So if you have at least an iPhone 5 in stock, then you can safely think about buying these headphones. They are easy to connect and will play your favorite music.

How to connect Airpods to iPhone and more

If you became lucky and still bought this gadget, then this article will be for you. First of all, I’ll tell you about how to connect your brand new Airpods to iPhone.

Connecting Airpods to iPhone Easily

Apple Airpods are not just wireless earbuds, they are true freedom from wires and temples. Airpods are more than just a headset, they are also a fashion accessory. In addition, Apple takes care of its customers, the technology from this manufacturer does not require special configuration and works almost right out of the box. Wireless headphones are no exception. However, all these advantages are corrected by a rather high cost. However, this does not stop fans of Apple technology. In addition, newer iPhones lack the standard audio jack.

In this article, we will analyze the control of wireless Airpods, how to connect them and the nuances of control.

Using Siri

Only double tap can be used to call Siri in the first generation models. The second generation Airpods have the ability to call the assistant by voice, just say “Hey Siri”. With its help, you can carry out a number of actions: control music, for example, you can start a favorite playlist or start the next track, check the charge level, adjust the volume

Double tap settings

In the first generation model, double-tapping activates Siri by default. To change the settings, you need to go to the “Settings” menu and select “Bluetooth” and select Airpods. After connecting the headphones, click on the I tab located on the right, this will take you to a menu where you can set the double-tap function. Here you can rename the headphones.

Connection features

Wireless earbuds can pair with multiple devices at the same time, such as iPhone and Apple Watch. At the same time, sound switching occurs in a fully automatic mode.

How to connect Airpods to iPhone

So let’s start simple: how to connect Airpods to your iPhone. It is very simple to do this. just open the Airpods case and the smartphone will automatically “see” the headset, a message about which will appear on the display in the form of an animation. After that, just click on the “Connect” button. Everything happens automatically if Bluetooth is activated on the smartphone and the operating system is iOS 10 or higher.

Read more:  How to Record Phone Conversation on iPhone 6

Using Airpods with Android Devices

The manufacturer positions this headset as an ideal option for use with its equipment, but this does not mean that Airpods cannot be connected to Android devices. It’s pretty simple to do this:

  • Place the headphones in the case;
  • Turn on Bluetooth on your Android device.
  • Open the headphone case. Hold the rear service button on it until the indicator light comes on.
  • Pair the devices.

Many users have problems displaying the charge level. The most convenient way to do this is using a special AirBattery application or any other with the same functionality. To display information on the battery status on the screen, just open the case cover.

You won’t be able to set up a double tap on Android. The initial setup will have to be done through the iPhone, even if later the headphones are planned to be used only on Android.

How to control listening to music through Airpods

You can choose one of the following methods to control playback:

Double tap. To do this, you need to set a value for each of the headphones in the settings menu. How to do this is described above.

Auto. The wireless earbuds feature automatic ear locator technology. Playback starts automatically as soon as the headset is inserted into your ears. If you remove one of the headphones, playback will be paused, if both. completely stopped.

With Siri. The voice assistant executes commands that cannot be assigned for double tap. For example, you can ask your voice assistant to change the volume level. Called by Siri with a double tap (if configured).

Connecting Xiaomi Wireless Headphones to iPhone

The Chinese brand Xiaomi has become well known all over the world for its quality and affordable smartphones. In addition to this, no less high-quality accessories are now produced under this brand. smart watches, fitness bracelets, wired and wireless headphones.

Wireless earplugs from “Xiaomi” are very popular. They are stylish, fairly simple and reliable devices to use. Any of the models, be it Redmi AirDots, AirDots Pro, AirDots Pro 2, etc., can be a worthy replacement for more expensive headphones of this type. For example, the functionality of the Xiaomi Pro is comparable to that of the Apple Airpods.

How to connect Airpods to your iPhone or Android device. Apple Support

The Pros boast attractive design, great sound, long battery life and Active Noise Cancellation (ANC). The value of ANC lies in the fact that the surrounding noise becomes inaudible, and the user can fully immerse themselves in the world of music or focus their attention on telephone conversations. Another huge advantage of the inexpensive AirDots Pro headphones over Airpods is the IPX4 waterproof rating and advanced touch controls. Taking into account the affordable price and impressive technical characteristics, many owners of iPhones instead of Airpods choose AirDots for themselves.

In order for the connection of the Xiaomi-headset to the iPhone to be successful, you need to know that it supports Bluetooth version 4.2 or higher. That is, the pairing will be possible with the models of iPhones and iPads that were released in 2014-2015. Use at least iPhone 6, iPhone 6 Plus and up, and iPad Pro, iPad Air 2, iPad mini 4 and newer tablets. If you have an iPhone 5s, then the “ears” from “Xiaomi” do not fit it.

Pairing Xiaomi AirDots with an Apple Phone or Tablet

Charge the batteries of these devices before pairing TWS headphones and Apple smartphone. Working Bluetooth modules, especially in search and pairing mode, require extra power. It is enough to put “dots” in a case for this, and put the iPhone on a wired or wireless charger. You don’t have to strive for the battery indicator to show 100%, half of the maximum level is enough for connection. Pairing AirDots with an Apple phone is almost as easy as connecting Airpods to an iPhone, although the process has its own quirks. To make everything work out the first time, follow the step by step steps that are described in the instructions.

Take the earbuds out of the charging case. They will turn on automatically.

Before pairing with an iPhone, AirDots must first establish a connection with each other. Therefore, turn off the headphones by pressing the touch or physical button (depending on the model) on each of the “dots”. When turning off, do not release the buttons for 3 seconds.

Turn AirDots back on. Press and hold the buttons at the same time for about 30 seconds. The LED indicators should flash first red, then white. Wait for two series of such signals to pass. This will mean that both earbuds are in pairing mode. You need to put them back in the charging case for about 5 seconds, and then take them out in order to connect them directly to the iPhone.

At this stage, you need a phone. Since AirDots are already prepared for pairing, open Settings, then Bluetooth on your iPhone and activate the wireless module. The smartphone starts searching for devices. Compatibility is the most decisive factor for successful detection, but we have already indicated above which models of Apple smartphones Xiaomi headphones work with. The line “Mi AirDots BASIC_R” or “Mi AirDots BASIC_L” will appear in the list of detected devices. Select her.

Perhaps such an entry will not be found in the list. Then the headphones need to be placed closer to the phone and the list of devices should be updated. In a pair of AirDots, the right earbud is the main one, so the new item in the list will be “Mi AirDots BASIC_R” (in fact, the device name may be different, not the same as in this example, it all depends on the headphone model). Click on it to start the connection. The indicator on the earbud will flash white while pairing is being established. Sometimes you need to enter a code to confirm the connection. Enter 0000.

When the process is complete, the indicator will turn white again and turn off. You can now use your headphones. Check the quality and, if necessary, adjust the sound settings.

After you manually connect the dots to your smartphone for the first time, they will automatically connect to it every time you take them out of the case. If there are problems with pairing, you will need to remove Mi AirDots BASIC_R from the list: click on the name, and then select “Forget this device” and repeat the steps described in the instructions again.

By the way, “AirDots” are connected not only in stereo, but also in mono mode, when only one earphone from a pair will be paired with the phone. This method of connection can be convenient in cases where complete isolation from ambient noise is not required. For example, on a busy street for greater safety, it is better to hear what is happening around. Another way of using AirDots significantly increases the battery life of the headphones: while one of them is in operation, the second is charged in the case, then the plugs are swapped. To pair only one of the two headphones, take out only the left AirDots from the charging case. Let the right one remain in the case.

Situations when the pairing between the headphones and the iPhone, as well as between the right and left dots, disappears from time to time. Then you have to do a reset and pair it again, in the order recommended in the detailed instructions given above.

In general, the compact budget earplugs “Xiaomi” or “Redmi” are a good choice for those who want to take advantage of modern wireless technology in their daily life, but do not yet decide to buy Apple Airpods of the first or second generation or more expensive Airpods Pro.

How to connect Airpods to Android device

If there are no “Apple” gadgets. no problem! Airpods can be used seamlessly with devices manufactured by other companies.

How to link Airpods to Android devices:

  • place the headphones in the case, while leaving the latter open;
  • on the case of the box, press and hold the button until the indicator glows white;
  • on a smart go to the Bluetooth section, find and connect to Airpods.

Nuances: the option to stop the melody does not work with Android if you remove 1 earpiece from your ear; Siri launch is not activated. You can add functionality by downloading and installing utilities on the gadget, for example, AirBattery.

How to answer a call?

You can answer through a double tap on the central part of any earphone. Or, if the user has changed this option in the settings, on the left or right “ear”. Each earphone here also performs the function of a microphone.

Connecting Airpods to Computer

Additional preparation is required here:

  • Find out if your laptop or PC supports wireless headset connectivity.
  • If not, purchase an additional Bluetooth adapter.

All is ready? Finding out how to connect Airpods to a laptop or PC, for example, on Windows 10:

Airpods control methods

There are 2 options here: double tapping on the headphone casing or removing them from the ears. Siri can also come to the rescue. No buttons, very convenient and mobile.

Connect and use Airpods. 5 steps to set up

Airpods are stylish wireless headphones that work perfectly with all gadgets of the “Apple” family. With their help, you can not only, in fact, listen to music, but also give commands to Siri, answer phone calls and much more. But is it possible to connect Airpods, for example, to a computer on Windows or an Android device? Of course, you can, if you know how to do it correctly. This and other features of the already legendary “earbuds” will be discussed further. Let’s explore from “A” to “Z” how to control these headphones.!

Headphone control features

  • remove one “ear”. playback is paused;
  • remove both headphones. playback is completely disabled.

Initial settings

You can leave the factory “tuning” unchanged and immediately start using the headset, or you can still change something for yourself.

For individual headphone settings, do the following manipulations:

  • go to “Settings”;
  • go to bluetooth;
  • click on Airpods.