How To Connect A Xiaomi Smartphone To A Computer

How To Connect A Xiaomi Smartphone To A Computer

With the advent of new devices on the technology market, users have a greater choice, due to their need for a new, interesting, unknown. With these needs and devices, uninvited guests come to us in the form of bugs, malfunctions, glitches, and everything else. In this article, we will try to deal with the question of how to connect a Xiaomi smartphone (in our case, Redmi 4x) to a computer, since it is of interest to the owners of the device very often.

Be prepared for the fact that you will have to use additional software, in some cases, someone will be forced to reset the device to factory settings and connect to the computer again and again, download “incomprehensible” software and so on.

Possible causes of malfunctions

Below is a list of possible causes of a problem with connecting the phone to the computer:

  • Non-original components (specifically USB);
  • Lack of drivers;
  • Incorrect connection method;
  • System problems with the device and more.

Of course, the above is not a complete list, in fact it is much more voluminous. Next, we will try to describe all the known methods of solving the problem and try to understand not only how to connect your device to the computer, but also tell you how to facilitate this process. These tips should help, even if your laptop or computer does not see the phone.

Connection Methods. 1 way. Standard

If when connecting the phone to the PC in the section “My computer” the necessary device does not appear or it appears, but the contents are missing and the folder is empty, this does not indicate a problem. In the latest firmware, the data transfer function is activated only upon request, by default, only the charging mode is turned on.

At the time of connecting the gadget, a notification about the connection should be displayed at the top, click on it.

If you do not have time “to catch” notice, just lower the curtain down, it will be there, tap on it.

A dialog box appears in front of us, where you can select the connection mode, select “data transfer”.

After these manipulations, the smartphone is simply required to appear as a connected device.

2 Way. Turn on debug mode

The method described above is the simplest, and if it did not help you, we are considering the next option from the same “unpretentious” category. Follow the following path on your phone:

  1. Settings
  2. Advanced settings;
  3. For developers;
  4. Activate “USB debugging”.

After these steps, connect the gadget to the computer, the connection should be established successfully, then select the data transfer mode. see method 1.

Read more:  How To Insert A Sim Card In Xiaomi Redmi 5 Plus

If there is no item in the menu “For developers”There are two reasons for this:

  1. You have not activated developer mode;
  2. This mode blocks the installed antivirus.

To activate “secret” mode, go to the settings in the settings “About phone”, click 7 times on the line with the MIUI version, after that the mode will be activated and this item will appear in the corresponding section of the menu.

In the case of anti-virus, you need to suspend its work (active protection) to see the necessary menu item.

We turn on the MTP method, thanks to which it will be possible to access the phone as a multimedia device. An alternative version of the same action: we type in the call menu # # 13491 # # Such a menu appears on each device, having almost the same appearance, so it does not matter whether you have Xiaomi Redmi 5a or Redmi 4x.

3 Way. Multimedia mode

Alternative 2 ways, if something went wrong. We type in the call menu # # 13491 # # , as soon as you type the last character from this combination, a dialog box should appear. In it we choose a method. MTP, thanks to which it will be possible to access the phone as a multimedia device.

Such a menu appears on each device, having almost the same appearance, so it does not matter whether you have Xiaomi Redmi 5a or Redmi 4x.

4 Method. Updating drivers

It is possible that the connection problem is not in the phone, but in the PC itself, or rather in the drivers. If you have an original USB cable, then we exclude that the problem is in it. You should definitely try to use different USB ports on your computer, for example, plug it into the back of the connector. If this does not help, then immediately you can try updating the drivers manually.

  1. Go to the device manager on the PC;
  2. We open the section “portable devices”, your Xiaomi phone should be displayed there;
  3. Right-click on the smartphone to call up the menu and select “Update driver”;
  4. Choose “Automatic search for updated drivers”.
  5. If the problem persists or new drivers are not found, then we download the drivers ourselves and indicate the path to them.

An alternative to this method is the installation of the Mi PC Suite program, which already contains all the necessary drivers, more about this program will be written below.

5 Method. troubleshoot connectivity

Connecting any device to the computer causes several processes at once. Now they are automated, but not always everything goes as it should. For example, if the computer does not see the smartphone even after updating the drivers, then the problem is something else. For such cases, there is a troubleshooting wizard for Windows.

  1. Go to the control panel
  2. Choose “Equipment and sound”
  3. Open “Devices and Printers”
  4. In section “Multimedia devices” find the Android device, right-click and select “Troubleshooting”;
  5. The Problem Wizard will check the connection and correct it if possible or give specific recommendations.
Read more:  Computer Does Not Shut Down After Shutting Down Windows

It is possible that your smartphone is defined as an unidentified device and will be located in another section with a different icon. If when connecting to a PC there are no new devices, then the problem is not software, you need to check the ports and cable.

6 Method. use terminal (root)

One of the most effective ways to solve a connection problem.

You will need a program. terminal, we recommend using Terminal Emulator for Android, which used to be called Android terminal Emulator. You can download it from the market.

After installation, we connect the phone to the computer and prescribe several commands in the program. It is important to understand that with its help we will get access to the phone in the USB-drive mode. Enter the first command and press Enter:

By executing the su command, we enable superuser rights (root access must be present) and confirm our choice. Then the phrase will be more complicated:

setprop persist.sys.usb.config mass_storage, adb

then press Enter on the smartphone, that is, the enter button.

Next, you should restart the device by writing a simple and understandable word

If you want to enter the device using the MTP method (as a multimedia device, and not in the flash drive mode), then do the same, only with the second command (where mass_storage is replaced with mtp), enter:

setprop persist.sys.usb.config mtp, adb

Remembering such devices as Xiaomi Redmi 5 Plus and even Xiaomi Mi Max, you are glad that such problems rarely occur with them, although it is strange why they arose with the fourth redmi. Okay, we understand the matter further, and let the developers who assembled smartphones be looking for the root of evil.

If the connection is only in camera mode

Having considered the five main ways to solve the problem, I would like to discuss an alternative option, which we attributed separately because of its simplicity and unusualness.

If the phone is connected in camera format, and not as a drive, try dragging and dropping the necessary files into the folder with photos, and then transfer them to the necessary sections through the phone. But this is for those who do not want to do anything at all, trying to solve the problem without effort.

Additional software. The program for the PC. Mi PC Suite

The same alternative to the usual installation of drivers, since this software combines many components for successful synchronization of the gadget with the computer.

Thanks to this program, you not only connect your smartphone to a PC, but also get additional features:

  • Backup and data recovery;
  • Create and manage screenshots;
  • Computer internet access;
  • Firmware update;
  • File manager.

If, after installing the software, the connection problem is not solved, then go to the “Task Manager”, find your unidentified cable and phone, click on any of the items, and then on the standard scheme, that is, “Driver”, “Update”, specify the path

and click on the button next.

QCustomShortcut. If connection settings are lost

Next, we will talk about the QCustomShortcut program (not in the market), thanks to which it will be possible to access the connection settings, if they disappeared after your first choice, which also happens quite often. In its second field Package, set the item com.android.settings, and in the Class field. com.android.settings.UsbSettings. Click the Create Shortcut button and you’re done.

Read more:  Xiaomi Redmi 7 Pros And Cons

Now, by clicking on the shortcut, you will get access to the connection settings.

Third-party file transfer programs

If you need to transfer a pair. the top three files from the computer to the phone or vice versa, but the usb connection does not work, it is worth taking a closer look at programs from third-party developers. You can use cloud storage for data transfer: Yandex drive, Cloud mail, Dropbox, Google Drive, etc.

In addition to cloud technologies, there are software specifically for data transfer, for example, SHAREit.

There is a version for both mobile phones and PCs (Windows, MacOS).

An alternative to the official client. MyPhoneExplorer

This method was suggested by one of the readers (Oleg, you can find his comment after the article), for which we express our deep gratitude.

So, we need a program called MyPhoneExplorer. The first part is installed on a PC, you can use the official version, or you can search the Internet for a portable assembly.

A link from the official website of the program leads us to the fosshub file storage. Then click Download MyPhoneExplorer Installer, Download and install.

The second part of the program is in the Google Play Market, it also needs to be installed.

By clicking on the appropriate connection in the program, the necessary settings should open in the phones. You can activate all types of connections, the main thing. enable debugging via USB cable; instructions on how to enable it are described in method 2.

Connection Features

It is worth knowing that the transfer of large files is limited to 4GB, since Xiaomi uses the fat32 file system.

If the process freezes while copying the file and the transfer does not end, then try to create a separate folder on your smartphone and copy the necessary file to it already.

Summary

The main connection problems are in the details, and the first and simple ways to solve them should help in most cases, because sadly, but this happens because of our carelessness. If the reason is in the device itself, now you know how to solve them with reliable and field-proven methods.

It is unlikely that this article will not help anyone, but if no method really came in handy for you, then the roots of the problem are much deeper than you think, most likely you will have to install new firmware on the device via fastboot mode, but this is already separate topic for discussion. We hope you will never need articles on how to connect a Xiaomi smartphone to a computer, but if such a question arises, you can solve it thanks to our article.