How to connect a Sony TV to Bluetooth

Connection and operation

Correct operation of the device is ensured by indoor operation, which helps to prevent radio interference. Maximum shielding occurs when the device is installed away from window openings.

Important! A local area network of IEEE 802.11 (5 GHz) configuration is suitable for connection. Stations with higher power negatively affect the operation of the device, up to and including damage.

Antenna capacity is 6 dBi, applicable FCC / IC standards. It is not recommended to mount the equipment at a distance of less than 200 mm from the place of long-term presence of a person (bedroom). The adapter is not compatible with other working antennas.

If your Bravia equipment does not provide a clear picture or sound, you need to move it to a point of good reception. You can do the manipulation in one of the following ways:

  • Re-tune antenna.
  • Increase the distance between the adapter and the receiving node.
  • Change the power connection diagram.
  • Consult an authorized service or specialist workshop.

How to connect Sony (Sony) Bravia TV to WI-FI, laptop, etc.

How to set up Wi-Fi on a Sony TV? Is it there, turning on Wi-Fi Direct, connecting devices, using a wire.

Sony UWA-BR100 adapter is used to organize a wireless connection of Sony AV equipment to the Internet, as well as to pair devices into a home network.

Compatible with Sony home theater systems:

Detecting and activating Wi-Fi Direct

And we will start, perhaps, with a wireless connection of a PC or mobile gadget to a TV. This is where Wi-Fi Direct technology comes in handy. There are three types of Sony TVs. Each has its own way of finding a function.

What it is?

A Wi-Fi adapter for a TV is a device that has the ability to receive and send signals to a wireless WI-FI network, using established protocols from a router to a TV port. Smart TVs also have these properties.

NOTE! To find this function, you can look in the instructions, settings or on the box on which the Smart TV mark will be.

Characteristics

Below are the main parameters of the Sony Uwa Br100r WI-FI module:

  • country of origin. Taiwan;
  • warranty period. 12 months;
  • compatibility. Sony equipment with AV connection;
  • operating frequencies. 2.4-5.0 GHz;
  • information encoding. WPA / WEP;
  • interaction with TV. USB 2.0;
  • dimensions. 14/27/96 mm;
  • weight. 27 g;
  • black colour.

Security measures

The manufacturer of Bravia devices indicates compliance with the following rules:

  • Place the accessory out of the reach of children.
  • Use the product with the original 1.5m cable.
  • Isolate the adapter from moisture and vapors.
  • Do not mount the device near heat sources and in direct sunlight.
  • Do not expose to open flames.
  • Service and repair the device, contacting specialists, without independent intervention.

Adding local analogue TV channels

Although in Russia broadcasting of federal channels is being transferred to digital, analogue television is still preserved: local programs are broadcast on it. If you want to watch them, proceed as follows:

  • Go to the menu and go to the “Settings”.
  • Select analog configuration (ATV).
  • Go to the item “Channel search”.
  • After the end of the procedure, guard the received analog channels.

If your TV does not support digital TV

If it turns out that the existing TV receiver cannot independently receive a digital TV signal, the user has two options:

  • Buy a new TV. Given that television technology is constantly evolving, this is the most reasonable, but also expensive option. Some digital TV functions may not be available on older models (e.g. HD picture playback).
  • Install a digital set-top box (aka receiver, decoder, tuner). This option is good if the TV is relatively new and of high quality, but simply does not have a built-in digital tuner.

After the set-top box is connected, it also needs to be configured to receive.

Manual Channel Tuning

It is usually required to switch the TV to manual channel tuning mode if there are any problems with autosearch, or if another digital multiplex is broadcasting in the vicinity, and you do not want to knock down the existing settings.

Step-by-step instructions for manual configuration are described in a separate article. In general, its algorithm looks like this:

  • In the TV menu, the item “Manual tuning” is selected.
  • The frequency from which the search will be conducted is indicated.
  • TCE number is established.
  • The detected channels are recorded in the TV memory.
connect, sony, bluetooth

You can find out all the necessary data in 2 minutes from the article about the frequencies of digital channels.

Auto search for digital channels on Sony

The easiest way to tune channels is with auto search. The exact procedure differs depending on the model and the specific interface option, but the general algorithm is as follows:

  • The TV menu opens (as a rule, using the corresponding button on the remote control labeled “Menu” or “Home”).
  • In the menu, the “Settings” tab is first selected, and then “Settings”.
  • In the settings you need to select the item “Digital configuration”.
  • In the menu that opens, you need to activate the item “Automatic search for digital stations”.
  • The TV prompts you to select a signal source. Here it is necessary to indicate where exactly the digital TV signal comes from. from the terrestrial antenna or cable.
  • The TV itself will begin to scan the range and store all detected TV channels in memory.
  • After the scan is finished, a message indicating the completion of the process will appear. After that, you can start viewing the found programs.

Important: some TV models (for example, the Sony Bravia line) have two types of scanning. fast and full. The second one looks deeper, looking through the entire available range, but it also takes much more time, up to an hour.

Manual Channel Tuning

It is usually required to switch the TV to manual channel tuning mode if there are any problems with autosearch, or if another digital multiplex is broadcasting in the vicinity, and you do not want to knock down the existing settings.

Step-by-step instructions for manual configuration are described in a separate article. In general, its algorithm looks like this:

  • In the TV menu, the item “Manual tuning” is selected.
  • The frequency from which the search will be conducted is indicated.
  • TCE number is established.
  • The detected channels are recorded in the TV memory.

You can find out all the necessary data in 2 minutes from the article about the frequencies of digital channels.

No signal

If no channel is showing, you need to take the following steps:

  • Check antenna connection. The plug may have fallen out of the socket.
  • Make sure the integrity of the antenna cable visually and, if possible, by “ringing” it with a multimeter.
  • Check antenna orientation. Digital TV broadcasts in the decimeter range, and UHF antennas, as a rule, are sensitive to the direction to the signal source, so they must be installed with a clear orientation to it. The exact bearing to the nearest repeater can be found on the CETV interactive map.

If none of these steps gave a result, you need to seek help from the masters. This is most likely a malfunction of the TV.

Other possible problems and solutions:

The channels were shown, but then they stopped

Sometimes it happens that digital channels that were only recently received suddenly disappear. What to do in this case?

But most likely the reason for the disappearance is the TV settings (for example, due to a power surge in the network). In this case, it is recommended to use two methods:

  • rescan the range (in manual or automatic mode). It is possible that channels will be found;
  • full reset to factory settings (how to do this on a specific digital TV model, you can find out from the instruction manual). After that, you need to re-configure the TV receiver, including searching for channels.

If your TV does not support digital TV

If it turns out that the existing TV receiver cannot independently receive a digital TV signal, the user has two options:

  • Buy a new TV. Given that television technology is constantly evolving, this is the most reasonable, but also expensive option. Some digital TV functions may not be available on older models (e.g. HD picture playback).
  • Install a digital set-top box (aka receiver, decoder, tuner). This option is good if the TV is relatively new and of high quality, but simply does not have a built-in digital tuner.

After the set-top box is connected, it also needs to be configured to receive.

Flash drive

The Sony TV has several USB ports. In order to watch your favorite movie or listen to your beloved performer, it is enough to download it to a flash drive and insert it into the TV connector. And how to do this will be described below:

How to connect Bluetooth speakers to Sony Android TV

connect, sony, bluetooth
  • We insert the USB flash drive into the corresponding connector on the back of the TV.
  • On the remote control, press the Home button.
  • Then we find the icon “Multimedia Center”.
  • Press the USB button and select the folder with the required file.
  • In order to return to the previous folder, you need to double-click on the HOME button on the remote control.

Digital TV

Digital TV differs significantly from analog TV. For example, as an image. If we compare the two, it’s like comparing old magnetic videotapes with modern Blu-ray.

With the advent of digital television, program schedules have become available on the TV screen. There is no need to buy newspapers and magazines to see the list of programs for today. To connect such broadcasting, special digital set-top boxes were previously installed, now on Sony TVs, this need has disappeared and everything is done much easier. directly to the antenna input.

To start tuning, you first need to determine the type of digital signal to be processed. Then we perform the following actions:

  • Press the “Home” button on the remote control.
  • Open the “Settings” menu on the display.
  • In the installation we find “Configuration”.
  • Then, by pressing the button “Autosearch digits. Stations “go to the next menu.
  • In the window that opens, select the type of digital TV connection. cable or terrestrial broadcasting.
  • Further, if TV is on-air, then the settings will start immediately. If it is cable, then you need to select your operator, click “OK” and wait for the settings to complete.

Telephone

There are three ways to connect an iPhone to a Sony TV. It’s over Wi-Fi, USB and HDMI. It is worth disassembling them in more detail.

  • In the phone settings, you need to go through the following windows that open. Settings. Wireless networks. Wi-Fi. Wi-Fi Direct. It happens that the last tab is missing, then you need to go to the “Additional settings” menu.
  • After this action, the search for available networks is activated.
  • Let’s move on to setting up TV. Using the remote control, open the menu on the TV and find “Network”. A window with possible connection methods will open. Choosing Wi-Fi Direct.
  • The next step is to confirm the connection of the phone on the TV screen.

After that, the connection can be considered complete.

  • This connection requires a special output on the phone. In case of its absence, an adapter can help.
  • Select the signal source on the TV screen. HDMI.
  • We connect the smartphone using a cable.
  • The system will determine what screen resolution is needed and display it on the TV screen.

The settings are complete and the TV is ready to play the phone resources.

  • We take a USB cable and use it to combine the TV and smartphone.
  • In the TV menu, open the Signal Sources, among other things, you need to opt for USB. By the same principle, it is necessary to carry out actions on a smartphone. Synchronization confirmation window will appear on its own.

Everything will be displayed on the screen as if you were working on a computer. You can open folders, view pictures, videos or listen to music. All this is controlled by the remote control.

Internet

Before you start connecting the Internet to your Sony TV, it is worth choosing the type of connection you are using. It can be a local network or a wi-fi connection.

And now about connecting to a local network in more detail:

  • We bring the Internet cable from the router to the TV. But before that, you need to make sure that both devices are turned off.
  • We take the remote control, turn on the broadcasting device and press the “Home” button on the remote control.
  • At the top of the screen, we find the “Settings” icon and click ok.
  • In the window, click on the line “Network”.
  • Next “Network settings”.
  • Network connection settings.
  • Next, two buttons “Simple” and “Specialist” will appear. Because ordinary TV owners are unlikely to possess the skills of special setting, it is worth choosing the “Simple” menu.
  • If the cable was connected in advance and correctly, then the setup should start at the same minute.
  • Repeat all the steps as described when connecting a local network, but at the end you will need to select the type of network to be connected. wi-fi.
  • Then a window with a password will be displayed.
  • After the password is entered correctly, the connection will start.

First you need to choose the type of connection

Digital TV

Digital TV differs significantly from analog TV. For example, as an image. If we compare the two, it’s like comparing old magnetic videotapes with modern Blu-ray.

With the advent of digital television, program schedules have become available on the TV screen. There is no need to buy newspapers and magazines to see the list of programs for today. To connect such broadcasting, special digital set-top boxes were previously installed, now on Sony TVs, this need has disappeared and everything is done much easier. directly to the antenna input.

To start tuning, you first need to determine the type of digital signal to be processed. Then we perform the following actions:

  • Press the “Home” button on the remote control.
  • Open the “Settings” menu on the display.
  • In the installation we find “Configuration”.
  • Then, by pressing the button “Autosearch digits. Stations “go to the next menu.
  • In the window that opens, select the type of digital TV connection. cable or terrestrial broadcasting.
  • Further, if TV is on-air, then the settings will start immediately. If it is cable, then you need to select your operator, click “OK” and wait for the settings to complete.

In fact, there are much more connected devices, as well as ways to connect them, but I would not want to describe everything as a scientific dissertation. For an ordinary user, the information offered in this article is quite enough. But if someone needs to connect a set-top box, PS3 or iPad, then it’s enough to turn on your ingenuity. To solve these problems, you just need to know how to connect using Bluetooth and USB port.

The modern world has made great strides in technology and TV is no exception. LCD TVs can easily replace your computer. Owners can connect them to the Internet (local or wi-fi), go to any of their sites of interest, use TVs to watch videos or listen to audio. But without additional devices, work will be difficult.

Bluetooth earphone

In order to enjoy wireless television listening, it is enough to know how to connect Bluetooth headphones to a Sony TV, devoid of all sorts of wires.

  • It is necessary to find in the settings. “pairing devices” via Bluetooth. Compatibility and connectivity may vary depending on the TV model.
  • Press the down arrow on the remote control and scroll to the “Settings” icon. Please note that some functions and applications may not be available. It all depends on the country and region of residence of the owner.
  • Then we find “Network and Affiliation and in it we open” Bluetooth Settings “.
  • Make sure Bluetooth is turned on.
  • Scroll down the list and click the “Device List” button.
  • The TV can connect to multiple devices. The number of connected devices may vary.
  • In order to connect a new device, you must click on the plus. When doing this, make sure that the device to be connected is within reach and with Bluetooth connected.
  • When the device is found, it will appear on the menu screen and show as “Unknown.”

In this video, you will learn more about how to connect a digital TV:

This completes the settings for connecting the Bluetooth headphones. All devices are paired and you can enjoy comfortable listening to programs or music wirelessly and without disturbing anyone.

Sony BRAVIA. How to connect to Bluetooth devices.

Soundbar

The best way is to connect the speaker to the receiver using HDMI ARC. The technology is as follows. A signal from a multimedia device is sent to the receiver and then the audio and video are divided into two streams. the video is fed to the screen through the HDMI wire, and the sound goes to the soundbar. If viewing is carried out without connecting external multimedia devices, then the streams go directly to the TV, and sound will be played through the cable to the speakers.

Advice! It is worth noting that for high-quality sound and image reproduction, you must purchase an HDMI cable of version 1.4 or higher. and also make sure the audio system and TV are ARC capable.

If there is no ARC support, then there are two more ways. this is connecting using a tulip or through the headphone jack. When connecting a tulip, you need to translate the sound manually.

Sony Bravia TV. Connect Bluetooth Devices (2021)