How to connect a Sony speaker to your TV

What Bluetooth devices are compatible with Sony Bravia TV?

You can connect wireless headphones, speakers, or sound panels to your Android TV via a Bluetooth connection however the devices must be compatible.

Models 2021

2020 models

Models 2019

2018 models

XR X91J series
XBR X900H series
XBR Z9G series
XBR X850F series

Is Sony Bravia Smart TV? Sony Bravia Smart TVs offer some of the best Android TVs on the market, but even the best Smart TVs can be hard to navigate. Android TV offers a wide range of apps and services with huge libraries of paid and free content, as well as games, social networking and a rich set of smart home features.

What comes free with Apple TV?

To connect Bluetooth to a Sony Bravia TV?

How to connect a Bluetooth device to a Sony Smart TV

  • Open the Bluetooth settings. Open the main settings menu and open the Bluetooth settings in the “Network and Accessories” menu.
  • Make sure that Bluetooth is activated
  • Add a device
  • Search and pairing
  • Your device is connected
  • Select the paired device
  • Disconnect or break the pairing.

Bluetooth headphones Philips and Sony TVs on Android TV

Since I have a Philips TV (model Philips 43PUS7150/12 with Android TV). and I successfully paired it with my JBL E45BT headphones, I will first tell you about this platform.

Important! I have no way to test the connection on my Sony TV. But, since Sony also uses Android TV as the Smart TV platform, I think it will work. I hope they didn’t make restrictions on connecting Bluetooth devices.

Go to the Android TV menu and select “Wired and wireless networks” at the very bottom.

Next, turn on Bluetooth and select “Search for a Bluetooth device.

The TV will give a message that you need to turn on the device and put it up to 5 meters away. Turn on your headphones and press the “Search” button. The headphones should be in connect mode. The blue bluetooth light should be blinking. If it doesn’t flash, you should probably press and hold the power button, or a separate button with the corresponding icon.

The TV should see our headphones. Select them and press “Connect”.

Next, you need to select the type of device. Select “headphones.”. And I got the message that “Connected to JBL E45BT.”.

The sound from the TV began to sound through the headphones. You can control them in the TV settings. Item “Removing the device”. There you can disable or remove the wireless headset.

I have headphones, after powering them on, the sound from the TV speakers goes straight to them. When I turn off my headphones, the built-in speakers sound.

With these televisions solved. If you have more information or still have questions, feel free to write in the Комментарии и мнения владельцев.

Coaxial cable

Another way to transmit audio when you connect your home theater to your TV is through a coaxial connector. In quality it is not much worse than a fiber optic, but the cable itself is more bulky and less flexible, which can cause some difficulties during installation.

This type of cable must be connected to the “Coaxial OUT” jack of the receiver and the “Coaxial IN” jack of the TV set. This looks like an “antenna” input.

After successfully connecting the audio, you must connect the video transmission from the receiver to the TV, and then connect the signal source and the audio system to the set-top box.

Cable connection order

It is important to remember that the main unit is the receiver. You need to connect your playback devices to it. Look for the OUT jacks on the back of the players. Found? Perfect. Insert the wires with matching connectors there. If there is a color marking. follow. Now you need to find the IN inputs on the back of the receiver. Connect the other ends of the wires there. Don’t forget the color coding, if any.

Now home theater players can transmit audio and video to the receiver. Do not insert the plug into the socket. Not yet. At all. It is not only that the current can hit you, but also damage the equipment.

Now we direct the signal to the speakers of the speaker system. To do this, you must connect the speakers to the special terminals on the back of the receiver. They can be clamped or threaded. Strictly follow the polarity and markings. If you connect the wires from the center speaker to the terminals for the subwoofer, not much good.

The next step is to connect the television receiver to the resulting system. If you think that there is a big difference in how to connect a Samsung, LG or Sony home theater, we hasten to reassure you. There are no particular differences.

Find the VIDEO OUT port on the back of the receiver and connect it to the VIDEO IN jack of your TV receiver with the appropriate cable. Plugged in? Ok. You can’t plug it in yet. Check to see if you’ve figured out how to connect your speakers to your home theater, and your home theater to your TV.

connect, sony, speaker, your

Make sure the players are connected to the receiver, and the cable from the receiver goes to the TV? Make sure all your speaker wiring is hooked up in the right order? If everything is correct, you can connect your home theater and TV to the mains. Insert a disc or use other media and enjoy watching your favorite movie or video clip with stunningly realistic sound.

The most advanced models are made in monoblock form factor. the drive of such combines can read any disc (CD, DVD and Blu-Ray). In this case, it is enough to connect the speaker to the AV receiver and throw the cable to the TV.

How to connect speakers to your LG TV

Modern LG TV can boast a high-quality sound. Nevertheless, many owners of equipment wish to further improve the audio system by connecting to the TV speakers. This allows you to enjoy surround sound of the highest quality.

Before you start connecting speakers, you need to clarify which audio jacks your LG TV model is equipped with. The most common are digital HDMI jack, line input (MiniJack) or specialized acoustic SCART or RCA jacks.

LG TV models with Smart-TV have the ability to connect wireless speakers via Bluetooth.

HDMI. found on the latest TV models and home cinemas. Allows you to transfer information without loss of quality.

If you’re going to connect a powerful audio center with built-in amplifiers to your TV, we recommend using HDMI connectors.

MiniJack, SCART (comb) and RCA (cinch) are not intended for powerful audio systems. When using these connectors you must be especially careful, because if you connect to the TV speaker system with a higher power than allowed, there is a risk of damage or even loss of equipment.

The second thing you should pay attention to is the speakers themselves. Speakers can be active or passive, and their type depends on how they are connected.

Acoustic system of the active type Assumes the presence of a built-in amplifier and is connected to the mains for power. In the vast majority of cases these speakers are connected to your TV using 3.5mm MiniJack or TRS inputs. If your LG TV does not have such connectors, you can solve the problem by buying an additional adapter “MiniJack / RCA”.

Passive type speaker system is not equipped with an amplifier, you should buy it separately and connect the speakers to it first, and then through the amplifier to the TV set. In this case, there is a chance that the sound quality will not be optimal.

Here’s what to look for when choosing an amplifier:

  • Its power should not be higher than the speakers’ power by more than a third. (Carefully read the user’s manual for your speakers, this information is sure to be included there).
  • Amplifier and loudspeakers must have the same impedance.
  • The wire which will be used to connect the amplifier to the TV set is very important. Experts recommend not using a cord with a cross section of less than 2mm.

How to connect the speakers to the TV with wires: step-by-step instructions

  • After deciding on the type of connection, connect the HDMI, RCA, or MiniJack wire to the appropriate jack on the back of the TV set.
  • If you connect your computer speakers to the TV, use your TV as a power source. To do this, plug them into any available USB port on the back.
  • Configure the sound settings on your TV.

How to connect wireless speakers to the TV: step-by-step instructions

  • Turn on your TV using the remote control.
  • In the “Menu” find the Bluetooth section and make sure that this option is active.
  • In the list of available devices, find the Bluetooth speaker you want to connect.
  • Synchronize the devices.

Once you’ve successfully connected the speakers to your LG TV, you need to complete the process by adjusting the sound settings on the TV itself.

  • Select the “Home” item from the menu (the “Home” icon).
  • Go to “Settings” (Gear icon).
  • In the upper right corner, look for the icon with three vertical dots, and in it, find the “Sound” section.
  • Under “Audio Out,” select “Audio Out (Optical/HDMI ARC).
  • Activate SIMPLINK mode.

If you are using a speaker system that supports LG Sound Sync (Sound Sync):

  • From the menu, select “Home” (the “Home” icon).
  • Go to “Settings” (Gear icon).
  • In the upper right corner, locate the icon with three vertical dots, and in it the “Sound” section.
  • Under “Audio Out”, select “LG Audio Sync (Optical)”.

If you connect an LG audio system that supports Bluetooth audio sync, select “LG Audio Sync (wireless)” when configuring the settings.

Is it possible to output audio from the TV via HDMI?

ARC (Audio Return Channel) technology that can transmit surround sound, from TV to home theater/receiver with HDMI cable v 1.4. HDMI connector with ARC support must be on your home theater receiver as well, you can find this information in the technical documentation of your audio system.

How to connect a JBL speaker to your TV without Bluetooth?

Connecting a JBL speaker to your TV via AUX Almost any TV has a 3.5mm input, so if your TV doesn’t have Bluetooth. You can connect the speaker with an AUX cable. How to connect: Plug one end of the cable into the 3.5mm jack on the speaker The other end into the 3.5mm jack on your TV

  • Go to the menu or swipe down from the top of the screen.
  • Find Bluetooth.
  • Turn it on by clicking on the slider.
  • Select “Search for devices” or “Pair with a new device.
  • Your phone will start searching for the speaker, the name of which will appear on the screen.

How to watch video from your phone on your TV via Bluetooth?

To connect your phone with the TV via Bluetooth, do the following steps:

  • Make sure your TV has this feature.
  • If you don’t have one, then connect a USB adapter that has Bluetooth.
  • Install the device synchronization app on your smartphone.
  • In the settings of your TV, turn on Bluetooth.