How to connect a phone to a tablet

Live video broadcast from the UAV

Most camera drones are capable of streaming video. This mechanism is versatile and is well suited for sports broadcasting, public safety, real-time crowd monitoring and other tasks.

Budget drones with a camera provide video transmission over a wi-fi channel. The receiver is a mobile device (tablet or smartphone). This is convenient because the operator usually already has one of these gadgets. Thus, the organization of communication with the quadrocopter via wi-fi gives the consumer significant cost savings with acceptable playback quality.

At long ranges, this transmission method can introduce a time delay of 2-3 seconds. However, usually drones with wi-fi control are not able to fly away from the pilot for a considerable distance.

How to organize a wi-fi connection and how to connect a quadcopter camera to a phone

Connecting a quadcopter to a phone via a wi-fi point is quite simple. The technique includes just a few steps:

How to connect a quadcopter to your phone. Instructions for a beginner.

If you still have questions after reading, write to the group in VKONTAKT

Android to Android Bluetooth Tethering. Tablet, Phone

How to connect a quadrocopter to a phone, we are very often asked by users with this question. The relevance of this task is confirmed by the fact that although most modern drones are equipped with RC controllers, there are a number of models, communication with which is supported through a smartphone and special applications for it.

Most often, a wi-fi channel is used to work with a UAV of this type. This control method is widely used for short-range flights, creating new possibilities and ideas for consumer-class models. Note that mobile devices are used not only to control an aircraft, but also to configure it, activate various flight modes, work with a gimbal and a video camera.

Pros and cons of connecting via Wi-Fi

• The smartphone screen is used to transmit video in real time;
• All drone flight functionality is controlled by simple touching the screen;
• It is allowed to use the built-in gyroscope for flight control;
• Smartphone creates a familiar platform for most young users.
• Weak control range;
• Smartphone apps need to be updated regularly.

We will be grateful if you share with your friends:

Welcome to the mykvadrocopter.ru team! Our hobby is drones. Here we describe their models, characteristics, share news and post instructions for use. Join our drone community on

Published 2 Sep 2018 18:43 © All about quadcopters

mykvadrocopter.ru

Welcome to the mykvadrocopter.ru team! Our hobby. drones. Here we describe their models, characteristics, share news and post instructions for use. Join our drone community on

How to connect phone to camera of Syma X5SW quadcopter

As an example, consider the method of connecting a smartphone to the video equipment of the Syma X5SW copter. The camera of this machine is capable of shooting video in 640×480 pix format at 30 fps. Photos are of the same resolution. Communication with a smartphone mounted on the remote control bracket is supported through the antenna of the built-in wi-fi transmitter.

The drone can fly up to 120 m from the control panel, but the video transmission is interrupted already at ranges of 30-40 m. The manufacturer claims that the video transmission is performed in real time. Experience shows that this statement is wrong. There are obvious time delays in the video channel.

Now let’s look at the actual binding procedure.

First of all, the pilot must download the SYMA FPV application to his smartphone. The corresponding QR code of the application can be found on the drone packaging or in the instructions for it. The code depends on which operating system the smartphone is running. iOS or Android. Owners of Android phones can face a very unpleasant problem. the Syma FPV app is only supported by Android 4.1 or higher.

If the program is installed, the operator can turn on the drone and start tying it up. It will take up to 30 seconds for the flight camera to create its own access point, after which the operator can begin the procedure for connecting to the phone. He selects the settings menu in his smartphone, finds the wi-fi section in it and independently connects to the network, which appears in the list that opens on the screen under the name FPV wi-fi.

If a message about the successful completion of the operation appears, the pilot exits the settings menu, finds the SYMA FPV application in the general list of programs and opens it. A splash screen appears on which you need to press the START button. The reaction to these actions will be the appearance on the screen of a live image coming via the wi-fi channel from the on-board camera of the drone.

Against this background, there are five icons, thanks to which the operator gets the right to record photos and videos, view the results in the phone’s memory, monitor the wi-fi signal level and log in from the application. In the lower left corner of the screen there is an indicator that fixes the duration of the video.

We advise you to read the “Interesting” section. Lots of tips for using drones.

9 (Комментарии и мнения владельцев) “How to connect a quadcopter to a phone. Instructions for a beginner. “

How to connect ex2mini to a smartphone. thanks

And what to do if you do not create a WI-FI quadcopter

The copter creates a vf, not all phones catch it. I came to the store with a drone, I found a body that sees a drone vf, I had to take.

Why can the phone pick up the copter’s network, but the picture does not go? On the application screen “no network” and the Wifi icon is lit in red. Although the network appears on the phone, the connection is made! The lights on the camera are green. What can be wrong?

What to do SJ-S70W quadrocopter can’t see Wi-Fi can’t connect prompt

Good afternoon. Please tell me if the phone does not support 5G it can really be connected to the Zino2 and FIMI x8 quadrics. I am choosing now between these two models. Thanks in advance for your feedback.

Robiti, I can not connect the LH-X25 drone to the phone, the phone can be turned on WI-FI, but I can not connect, but the robot?

I have a jjrc x13 drone how to connect to Redmi 8 Android12 does not see WI-FI

via bluetooth

• the phone / tablet connector will not be occupied, which means it can be connected to the charger (or to another additional device);
• no OTG cable / adapter needed;
• the device is not wasted on the mouse (it has its own batteries).

True, there is also a drawback: if your sensor or Bluetooth adapter on your device does not work well, then you probably will not be able to configure the mouse connection (besides, Bluetooth does not always work stably. “Connection” breaks are possible).

1) First you need to install the batteries in the mouse, turn it on and press the pairing button (if any).

2) Next, go to the phone (tablet) settings and go to the “Device / Bluetooth connection” tab. See example below.

Opening the Bluetooth settings on the phone

Tethering Samsung Galaxy Tab 7.7 to your Android phone

3) Then you need to turn on the Bluetooth adapter: a mouse should appear among the found devices (it will be called “Bluetooth Mouse” or a mouse model). After clicking on it, the devices should pair.

Note: Sometimes the phone may ask for a pairing code. In this case, carefully inspect the packaging (documents) that came with the mouse. usually, it is indicated there.

By the way. I can’t help but note that some mice cannot be connected to the phone (not at all! Especially, this applies to older devices).

Adjusting Pointer Speed

If the mouse cursor “runs” across the screen too fast / slow, it can be fine-tuned. To do this, open the Android settings section “System / Language and input / Other input methods”. See screenshot below.

After that, you can manually adjust the pointer speed (example below).

Ways to connect a mouse to an Android device

with the help of specials. OTG cable

The first thing I want to say right away before buying an OTG cable / adapter is to pay attention to your connector on your phone (tablet).

Now most new devices come with a USB Type-C connector (older ones. With Micro USB // if you look at the photo below you will notice that it has “beveled” corners).

Of course, these connectors are different and they are not backward compatible (i.e. if you buy the wrong OTG adapter, you will not be able to insert it into your phone connector!).

Please note that OTG adapters are different!

The OTG adapter is a universal thing, and allows you to connect at least two dozen devices to your phone! You can find out more about this on the blog: https://androidlime.ru/otg-connected-to-phone

After purchasing the necessary cable (adapter), first connect the cable from the mouse to it (or USB adapter, if we are talking about a wireless radio mouse).

Install the battery in the mouse and turn it on! (this step applies to wireless mice)

If the mouse is turned on, the LED usually lights up on it.

Then turn on and “wake up” the phone (tablet). and connect the OTG adapter to it (it is advisable to immediately press the right mouse button).

As a rule, the familiar cursor will immediately appear on the screen. You can use!

A wired mouse is also connected to the phone!

The cursor has appeared. the mouse works! // Wireless mouse with USB adapter

How to connect a mouse to a tablet, phone (on Android)

good time!

You have never had to work with documents on a tablet / phone. (not just read a “couple of numbers”, but, for example, swap a few paragraphs, correct something and print)

Surprisingly, the mouse (external keyboard) in this case is much more useful (give 100 to work) than clicking on the screen. Selecting and transferring text is a 3-second task if you have a mouse (and a real torment if you don’t have one)! However, you may need to connect the mouse to the phone for various games (especially action movies and shooters), if the sensor breaks, etc.!

Actually, in this note I will give several ways how this can be done (how to pre-configure the work of the mouse). By the way, for “some”. I say right away that I do not pretend to be the ultimate truth.

2) I have a whole section on my blog dedicated to connecting one device to another. Recommend!

A mouse, keyboard, monitor are connected to the phone (UH3236 docking station used)

using docking stations and cases (with built-in keyboard)

Instead of an OTG adapter, you can use more “advanced” pieces. We are talking about specials. doc. stations (hubs), which will allow, in addition to a mouse, to connect a keyboard, a joystick, a monitor, and other gadgets (and all this at the same time!).

In fact, your phone will be like a system unit, and you will work like a regular PC (see photo below).

There are only a couple of downsides worth noting: doc. stations are much more expensive than conventional adapters. Plus, they are (most often) larger than the phone. so it is not very convenient to carry it with you (add to this the abundance of wires).

The phone is connected to a mouse, keyboard, monitor / using a dock. station UH3236

Perhaps, as an option, in this regard, covers with a built-in keyboard can help out. By installing a phone / tablet in such a case, you get both a keyboard and additional. USB port, and stand. It is quite possible to edit the document in the “field” conditions, a kind of replacement for a mini-laptop.

How to allow a Bluetooth device to connect?

• Select Start Settings Bluetooth & Other Devices.
• Select Advanced Bluetooth options to find additional Bluetooth options.
• On the Options tab, select “Allow Bluetooth device to find this computer”.

How to allow a bluetooth device to connect on a laptop?

Find in the control panel “Device Manager”.

• Find the line “Bluetooth radios” in the list of devices. Right click on the respective model (highlighted in yellow) and select “Properties”.
• Right click on “Bluetooth Networking” and select “enable”.

How to distribute the Internet via bluetooth?

On the device that you need to connect to the Internet, open the settings and activate the Bluetooth module. In the list of devices available for connection, you will see the one on which the distribution of the Internet is configured. Click on it and pair it. Now you can use the Internet.

How to display an image from a smartphone screen to a tablet?

How to set up Android screencast

• Make sure your tablet or mobile is connected to the same Wi-Fi network as the Chromecast.
• Launch the Google Home app.
• Select device.
• Tap Cast Screen Cast Screen.

How to output an image from a phone to a tablet via USB?

Outputting Android Screen to Computer via USB Connection

• open the “Settings” section;
• go to the item “For the developer”;
• activate USB debugging mode on the phone itself;
• connect the phone to the computer using a cable;
• confirm permission to debug over USB connection.

How to connect a phone to a tablet

How do I connect my phone to my tablet? Let’s start with the fact that you need to decide for what purpose you need such a connection:

• for data transmission;
• for distributing the Internet;
• to manage (the most interesting).

Data transfer

We will exclude the cord immediately, although this can be done both theoretically and practically. Long, inconvenient, costly. these are not all disadvantages. Typically, the phone is connected to a tablet for data transfer. Upload videos, photos or documents. As such, in the literal sense of the word, you can connect your phone to a tablet via direct Wi-Fi or the Internet.

In the first method, you need to enable direct Wi-Fi on both devices (it can be called Wi-Fi Direct, etc.).

You need to go to Options and select the desired option in the “” section. The beauty is that files are dumped at a tremendous speed, with an average of about 50 Mbit. Next, in any file manager, select what you want to transfer and send it to your tablet / phone.

There are many ways to accomplish a task over the Internet. The easiest way is to upload a file to a file hosting service and then download it. We will not give examples, just type in the word “File sharing” in the search. But this method has already outlived its usefulness.

It’s much better to use services like Dropbox. You create an account and put the necessary files there. The application itself from the service is installed on a phone, tablet, computer and on all other devices, if desired. Now, no matter where you add files from, the latter will be available on all devices. You can access them even from any other device (friend, for example), just by going to the browser. Convenient, isn’t it? The process itself refers to the question of how to sync a tablet with a phone. This also includes other services. The same Yandex, Google, etc. with their virtual disks. Google will be especially convenient for Android users. In addition to the virtual space, you can create documents for joint editing, communicate like on Skype, etc.

Internet distribution from phone to tablet

We will not dwell here for a long time. The easiest way is to create a portable hotspot from one device. In iOS, you just need to move the slider in the Modem Mode section of the gadget settings. On Android, this section is hidden under the Options category. Only instead of the slider, you need to check the box opposite the “Portable Hot Spot”. In new versions of Android and wizards of individual companies, the function was moved to the status menu (top swipe).

How to control your tablet using your phone

So we got to the fun part. Users often use the tablet as a home media center by connecting the device to a TV or speakers. But why do you even need to control the tablet from your phone? It’s that simple! You are relaxing on the couch and watching a movie or listening to music. Perhaps you just want to play a game. You can just take your phone and use it as a remote control for a tablet or a gamepad for games.

Let’s start. The Tablet Remote must be installed on both devices from the Market. It must be said right away that the program is not the same as Red Admin or TeamViewer. You will not be able to fully control the tablet from your phone, but, as mentioned above, it will do as a remote control or gamepad. over, you can connect devices not only via Wi-Fi, but also via Bluetooth, which is good when the phone also distributes the Internet. After the first power on, you will see the following interface.

First you need to make your gadget a remote keyboard. To do this, deselect both options in the SETUP section. Now launch the program on your tablet, and on your phone, select Connection and click on the radar. After searching for devices, just tap on the found tablet (as a rule, it will write its name). At subsequent entries, there will be no need to produce this. the devices will knit themselves.

Changing positions from the remote control to the gamepad is as easy as shelling pears. You just need to change the display orientation.

Ways to connect phone and tablet

Bluetooth

To transfer files from one mobile device to another, Bluetooth technology is often used, which is present in almost any modern gadget. The algorithm is as follows:

• Make sure this technology is available on both devices. Versions compatible.
• Activate the Bluetooth module on both devices.
• On the one from which you want to transfer files, enable device search. Highlight the list.
• Find the second device, press it, thereby activate.
• Find the file you want to transfer. Open the window, select the “Send via Bluetooth” item, select the recipient.
• To allow data transfer, give permission. click “OK”.

Important! To save battery power, when the session is over, do not forget to disconnect the connection, turn off the modules.

The main disadvantage of such a connection is its low speed. The transfer of “heavy” files can take quite a long time. Therefore, for such cases, we recommend using cloud storage (Dropbox, Google Drive, Yandex. Disk). After placing the files there, access is possible from all devices with the Internet.

In addition, through this technology, it is possible to create a VPN connection.

• To do this, we find, download the BlueVPN program.
• Launch, open the list of devices, find a smartphone.
• We click on it, we make the connection.

You can make friends between a smartphone and a tablet using Wi-Fi, but this will no longer be a file transfer, as it was with a Bluetooth connection. Here it will be the reception and distribution of the Internet from one to another.

• Modem mode is activated in the dispenser.
• The host starts a search for valid Wi-Fi networks.
• After detecting the network, it is activated by pressing. If necessary, enter the password specified in the settings of the dispenser.

Using this protocol, you can also connect your handheld to the Internet via a “friendly” smartphone. To do this, he must maintain a connection with a 3G, 4G network, and this is embedded in almost any modern device.

Important! For such an action, no additional software will have to be installed on the device. All parameters are set by settings.

• Mobile gadget settings. go to “Wireless networks”. section “”
• Activate the “Modem Mode”, switch the “Access Point” switch to the “On” position.
• That’s it, an access point has been created on the smartphone. It is possible to connect to it from any device that supports the protocol. About parameters. network name, password for access, encryption method. information in the settings.
• On the handheld, we start the search for available networks, find, connect. Enter the password if necessary.

How to connect a phone to a tablet

Mobile devices have already become a part of our daily life. Each successfully fulfills its tasks, but if a few are “brought together”, then their capabilities will undoubtedly increase. Today we will tell you how to sync your tablet and smartphone. This is the ability to transfer data between them, distribute the Internet, control one device from the screen of another. Since devices based on Android OS implement data transfer at a high level, let’s talk about them. There are several ways to “make friends” two mobile devices. wireless, using a cable.

Additional features

The user can display the image on the tablet screen from the phone. Another interesting function that opens when the tablet and the phone are “friends” is the ability to turn the latter into a remote control or a joystick (gamepad). After that, you sit comfortably in a chair, launch a toy or broadcast of an interesting match on a tablet, adjust the volume, perform actions. control it with your mobile phone. What needs to be done for this?

The free Tablet Remote utility will help you. Its main advantage is that control does not require the Internet, meters of cable and other devices. It is enough only to have a Bluetooth module.

• Follow the steps described in the paragraph “Ways to connect your phone and tablet”. Bluetooth.
• Install the utility on both devices, run it.
• The menu opens. Go to the “Setup” section. We check. both options should be inactive. If so, then the smartphone is already a remote keyboard.
• Go to the next tab “Connection”. We start the search for active devices. Check that the phone is turned on, otherwise the tablet will be able to detect it and, accordingly, make a connection.
• After finding the device, click on it to establish a connection. This is done only the first time, then the process will be automatic.

How to transfer mobile Internet from phone to tablet?

• Open the Settings of your smartphone or tablet.
• Select the Wireless & networks category and open
• Open the Hotspot item and activate the Wi-Fi hotspot.
• In the parameters of the access point, specify the name of the future network and the password for it.

How to display an image from a phone to a tablet?

How to set up Android screencast

• Make sure your tablet or mobile is connected to the same Wi-Fi network as the Chromecast.
• Launch the Google Home app.
• Select device.
• Tap Cast Screen Cast Screen.

How to display an image from a smartphone screen to a monitor?

To output pictures from a mobile device to a computer monitor or TV, you need a USB or HDMI cable.

• USB connection.
• HDMI connection.
• Miracast.
• MHL.
• Programs for broadcasting to the monitor
• Plugin

What is Phone Broadcast?

Modern Android smartphones support the “Broadcast” (“Projection”) function, which allows you to quickly display content from the gadget on the TV screen from Smart TV. It is also important that the TV and the phone are connected to the same Wi-Fi, otherwise nothing will work.

How to output an image from a phone to a tablet via USB?

Outputting Android Screen to Computer via USB Connection

• open the “Settings” section;
• go to the item “For the developer”;
• activate USB debugging mode on the phone itself;
• connect the phone to the computer using a cable;
• confirm permission to debug over USB connection.

How to connect your tablet to the Internet via a network cable?

To do this, first turn off Wi-Fi on the Android device and, if necessary, mobile data. Now connect the OTG cable to your smartphone / tablet. Then you can plug in an Ethernet adapter and plug in a LAN cable to it. In the “Ethernet” application, select “Enable”.

How to connect two phones over Wi-Fi Android?

Setting up Wi-Fi Direct on Android devices

To set up Wi-Fi Direct on Android, enter the Wi-Fi wireless settings and turn on the adapter. Next, let’s look at the steps on the example of Android version 4.4 on a Samsung S4 smartphone. After turning on the Wi-Fi module at the bottom of the screen, you will see the “Wi-Fi Direct” button. Click her.

How to distribute the Internet from phone to tablet via Bluetooth?

On most Android smartphones, this connection is available via Wi-Fi, Bluetooth or USB.… Turn on the hotspot

• On another device, open the list of available Wi-Fi networks.
• Select the name of your smartphone’s hotspot.
• enter password.
• Click Connect.

How to output an image from a phone to a tablet via USB?

Outputting Android Screen to Computer via USB Connection

• open the “Settings” section;
• go to the item “For the developer”;
• activate USB debugging mode on the phone itself;
• connect the phone to the computer using a cable;
• confirm permission to debug over USB connection.

How many devices can be connected via Bluetooth to a smartphone?

The official Bluetooth specification says that up to 255 sleeping devices can be connected.

How to sync two Android phones?

• Open the Settings app on your phone.
• Click Accounts. If this item is not there, click Users & Accounts.
• If the device has multiple accounts, select the desired.
• Click Sync Accounts.
• A list of Google apps will open.

How to display an image from a phone to a tablet?

How to set up Android screencast

• Make sure your tablet or mobile is connected to the same Wi-Fi network as the Chromecast.
• Launch the Google Home app.
• Select device.
• Tap Cast Screen Cast Screen.

Can I remotely control my phone?

Getting remote access via Google. a popular search engine allows you to “monitor” your device (for example, a smart on Android) and perform simple actions on it. From an Android device. you can control a stationary computer, tablet or laptop from your phone on this OS.

How to connect a phone to a tablet via Bluetooth?

Establishing a connection with a Bluetooth device

• Swipe down from the top of the screen.
• Click on the Bluetooth icon. and hold it.
• Click Add Device.
• Click on the name of the Bluetooth device you want to connect.
• Follow the instructions on the screen.

How to find out if you can call from a tablet?

It’s easy to check if the tablet can call via SIM: just enter the menu and see if there is a dialing function and calls. Traditionally, the icon of the corresponding application is a telephone receiver. Another option is to see if the model has support for calls on the Internet or on the box.

How to control your phone using a tablet?

How to control a tablet from a smartphone in Android OS

• Launch the app on the tablet.
• Go to the “Setup” menu and check the boxes opposite both items.
• Launch Tablet Remote on Phone.
• On the tablet, go to the “Connection” submenu and click on the “Scan Devices” icon.

How to install WhatsApp on a tablet without a phone?

Open the Play Market. Write in the search for whatsapp. Go to the official page of the application. If you see the “Install” button, click on it and install WhatsApp as a normal application.

How to display an image from a phone to a tablet?

How to set up Android screencast

• Make sure your tablet or mobile is connected to the same Wi-Fi network as the Chromecast.
• Launch the Google Home app.
• Select device.
• Tap Cast Screen Cast Screen.

Can I use my tablet as a mobile phone??

All tablets have a built-in 3G module, so they can be used as a phone. All devices are selected in the price range from 15,000 to 25,000 rubles. Almost all modern tablets have a built-in Bluetooth module, which allows you to connect a headset to it for convenient use as a phone.

How to share the Internet from phone to laptop?

Open your smartphone settings. In the section “Wireless networks” (“Network”) find the item “Modem mode” (“Modem and access point”). Activate USB tethering. A new network with Internet access will appear on the computer.

How to connect from one phone to another?

Set up the other device to connect to the network via Bluetooth. Swipe down from the top of the phone screen. and hold it. Switch on the Bluetooth modem. Important!

• Connect your phone and other device with a USB cable.
• Swipe down from the top of the phone screen.
• Click on the “Access Point” icon
• Turn on USB tethering.

Can I connect my phone to a tablet?

Typically, the phone is connected to a tablet for data transfer. Upload videos, photos or documents. As such, in the literal sense of the word, you can connect your phone to a tablet via direct Wi-Fi or the Internet.

How to sync smartphone and tablet?

• Open your phone settings.
• Click Accounts. If this item is not there, click Users & Accounts.
• If you have multiple accounts, select the one you need.
• Click Sync Account.
• Tap Sync.

How to sync your Apple phone and tablet?

The easiest way to sync iPhone with iPad is to create two accounts. The first is required to sign in to iTunes from the iPhone, and the second is required from the iPad. Then, using the “Data Transfer Wizard”, you can transfer data from one device to another.

How to sync WhatsApp on your phone and tablet?

• To get started, on your tablet, go to the WhatsApp web client page.
• After that, go to the application settings on your smartphone and find the sync point via QR code.
• At the same time, this code must be in the browser on the tablet.
• You can now use WhatsApp on your tablet using WhatsApp Web.

Is it possible to connect smartphones with a cable?

In order to connect two phones with a cable, you need to have a micro-USB to USB cable and a USB-female adapter for “OTG” in stock. For starters, it’s worth noting that you can only connect phones that support the One-touch-Go (OTG) function. Thanks to this technology, any peripheral device can be connected to the smartphone, including a second phone.

USB adapters can be marked “master” or “slave”, that is, they can be master and slave. If there is an adapter marked “master”, then the phone with this adapter will be the main one, and the second phone will be displayed on its screen as a removable medium. If the adapter is marked “slave”, then the situation will be mirrored.

All modern smartphones support OTG technology. It was designed to connect keyboards, webcams, removable media, printers, mice and other peripherals to Android devices.

To connect two phones, you first need to connect a USB-female adapter to one phone, and a micro-USB cable to the second phone. After the phones have determined the cable and adapter, you can safely connect them together.

When connecting two phones, there is no need to use additional software. For this, the interface of a standard smartphone file manager is sufficient. In this case, the contents of the slave phone are displayed in the file manager of the main phone as the contents of removable media. After connecting the phones with a cable, you can copy files at high speed and not worry about a possible disconnection or loss of data, as is the case with data transmission via the “Bluetooth”.

How to connect two phones to each other?

A situation often arises when the question becomes relevant: “How to connect two phones to each other?” For example, you need to copy a large file with a video or program from one phone to another. Or move a large amount of music and photos. In addition to the traditional sending of files via Bluetooth and Wi-Fi, there are several other methods. This article will show you how to connect two smartphones with a USB cable.

How to connect a smartphone to a tablet?

Today, tablets are no less popular than smartphones. And therefore, the question of how to connect a tablet to a phone with a USB cable arises quite often. over, most modern users often have both of these devices. And sometimes it is very necessary to quickly copy a large amount of information from one of them to another.

As in the situation with two phones, a micro-USB to USB cable and a USB-female adapter for the “OTG” function will come to our aid. But some tablets already have a built-in USB interface. In such a situation, the task is simplified: you only need a micro-USB to USB cable to connect. Just remember that the built-in USB-female often has the manufacturer’s label “master”, and take this into account when connecting.

Once you know how to connect your phone and tablet via a USB cable, transferring information between the two devices becomes even faster and more reliable. Of course, in the world of wireless technology, this capability is not always necessary. But situations happen differently. For example, one of the devices has a broken Wi-Fi adapter. Then data transfer via the USB interface will be the only and no less reliable way.

Internet distribution

If you want to connect your tablet to the Internet, but there is no Wi-Fi hotspot available, you can create one yourself using a smartphone with 3G or 4G access. This simple operation does not require additional software, all the necessary parameters can be set in the standard Android settings.

• Open the settings of your mobile device and go to the “” tab, which is located in the “Wireless networks” field.
• Start “modem mode” and set the “Access Point” switch to “On”.
• The smartphone will automatically create an access point to which you can connect from any Wi-Fi enabled device. The access point parameters can be viewed in the settings. here are the name, password and encryption method.

All you need to do is start a search for available networks on your tablet and connect to the created hotspot.

IPhones and iPads with Cellular signature (which means they support mobile communication via a SIM card) have a wireless tethering feature.

It turns your device into a Wi-Fi hotspot that other gadgets can connect to, including tablet computers.

Instructions for streaming internet from an Apple mobile device:

• Go to settings.
• Open the “Modem Mode” section.
• Toggles the slider to active position.

To see the name of the created Wi-Fi network when distributing the Internet from the iPhone, you must click on the “Wi-Fi Password” item. In addition to the name, here you can change the password, which must be at least eight characters long.

USB cable

In this case, a connection via a USB cable is required, most often this method is used to distribute the Internet to a computer or laptop, since standard chargers can be connected to the gadget on one side and to the computer on the other.

Therefore, to transfer data from smartphone to tablet, an appropriate cable is required.

• Open Settings on your smartphone.
• Go to the “Connections” or “” tab.
• Then open the “Hotspot” section.
• Click on the “USB tethering” tab.
• Connect your device using a USB cable.
• To move the slider on the phone to the toggled position.

This method is so convenient that passwords and network names are not needed here. All you need to do is connect the cable and use your smartphone as a modem with your mobile Internet.

Data transfer

We immediately exclude the cord, although it is possible both theoretically and practically. Long, inconvenient, expensive. these are not all the disadvantages, as a rule, the phone is connected to the tablet to transfer data, download videos, photos or documents, as such, in the literal sense of the word, the phone-to-tablet connection can be carried out via direct Wi-Fi or via the internet.

In the first case, you need to enable direct Wi-Fi (it can be called Wi-Fi Direct, etc.) on both devices.

You need to go to the settings and select the desired option in the “” section, the beauty is that files are dropped at a tremendous speed, on average about 50 Mbps. Then in any file manager you choose what you want to download and send to your tablet / phone.

Through the Internet, you can accomplish the task in many ways, the easiest way to upload a file to a file hosting service and then download it, I will not give examples, just type in the search the word “File hosting service”, but this method has outlived its usefulness.

It is much better to use services such as “Dropbox”, create an account and put the necessary files there, install the same application from the service on a phone, tablet, computer and all other devices as desired. Now, wherever you add your files, they will be available on all your devices. You can even access them from any other device (like from a friend) just by going to your browser. Convenient, right? The process itself decides the question of how to synchronize the tablet with the phone. This can also include other services, the same Yandex, Google, etc. with its virtual drives, Google will be especially convenient for Android users, in addition to the virtual space, you can create documents for co-editing, chat like in Skype, etc.

Controlling your tablet from your smartphone

Another interesting reason for combining a phone and a tablet can be the user’s desire to turn their smartphone into a remote control or gamepad. What is it like?

You launch a game or movie on your tablet, sit back, pick up your smartphone and use it to control the tablet screen.

Of course, for this to be available, you must first set up your hardware, which can be done with the free Tablet Remote app.

• Download Tablet Remote app from Play Market for tablet and phone.
• Go to the Settings section of the smartphone app and make sure both options are turned off. If everything is confirmed, then your phone is already a remote keyboard (gamepad).
• Press the Connect button on your phone to start searching for available devices. It is important that the application is enabled on the tablet, otherwise it will not be able to be detected and connected.
• Once the tablet is found, tap on it to connect your phone to the tablet. After that, you will no longer need to pair the devices, as this will happen automatically when you launch the Tablet Remote app.

To start controlling the tablet from your phone, go to the “Remote” tab, here you will see a remote control that turns into a real gamepad when the display is horizontally oriented.

Another way to connect, this time with a cable, demonstrates a short tutorial video:

Data transfer

The most common reason for the question of how to connect a phone to a tablet is the desire to transfer files from one portable device to another. This is usually done via Bluetooth:

• Activate Bluetooth technology on both devices.
• Start on the device from which the files will be transferred, search for available points for connection.
• Once the second device is found, find the file you want to transfer and expand its action menu. Select Send via Bluetooth. Specify the receiving device.
• A notification will appear on the screen of the receiving gadget about the need to give permission to transfer data. Click “OK” to start transferring information.

Be sure to turn off Bluetooth after finishing data transfer to avoid wasting battery power.

The main disadvantage of the Bluetooth connection is the insufficiently high speed, which does not allow transferring large files in normal mode. If you want to transfer a serious amount of information, then it will be more convenient to use cloud services such as Dropbox, Google Drive or Yandex. Disk.

All cloud storages work according to the same principle. you create an account and upload the necessary files to your profile. You can access them from any device with Internet access.

Install the Dropbox app on your portable devices and move files between them using cloud storage.

Ways to connect phone and tablet

Tablet and smartphone. if you have two of these portable devices, then you probably had an idea to connect them together in order to transfer data, distribute the Internet or control another device from one gadget.

Internet distribution

If you want to connect your tablet to the Internet, but there is no Wi-Fi point available, you can create it yourself using a smartphone that has 3G or 4G access. To perform this simple operation, no additional software is required, all the necessary parameters can be set in the standard Android settings.

• Open the settings of your mobile device and go to the “” section, which is located in the “Wireless networks” field.
• Start “Modem Mode” and set the “Access Point” switch to “On”.
• An access point will be automatically created on the smartphone, and you can connect to it from any device with a Wi-Fi module. You can view the access point parameters in the settings. the name, password and encryption method are indicated here.

You just have to start a search for available networks on the tablet and connect to the created point.

Controlling your tablet from your smartphone

Another interesting reason for connecting a phone to a tablet is the user’s desire to turn a smartphone into a remote control or gamepad. How it looks?

You start a game or a movie on your tablet, make yourself comfortable, pick up your smartphone and use it to control what is happening on the tablet screen.

Naturally, in order for such an opportunity to become available, you will need to pre-configure the equipment, which can be done using the free Tablet Remote application.

• Download Tablet Remote from Play Market on both devices. tablet and phone. Run the app on both devices.
• Go to the “Setup” section of the smartphone app and check that both options are disabled. If everything is correct, then your phone is already a remote keyboard (gamepad).
• Tap on the “Connection” item on your phone to start a search for available devices. It is important that the application is enabled on the tablet, otherwise you will not be able to detect it and make a connection.
• Once the tablet is found, click on it to connect your phone to the tablet. Subsequently, you no longer have to pair devices, as it will automatically occur when you start the Tablet Remote,

To start controlling your tablet from your phone, go to the “Remote” section. Here you will see the remote control, which in the horizontal orientation of the display turns into a real gamepad.

Another way to connect, this time using a cable, is in a small video instruction: