How To Connect A Computer To The Internet Through A Tablet

How To Connect A Computer To The Internet Through A Tablet

Tablets are today an essential tool for many users. And there are many reasons for this, the main one being mobility. After all, with it you can always and everywhere access the necessary data, go online, take a photo,, watch a movie, read a book, play games and so on. That is, having it, you constantly have at hand an almost complete computer, however, with a smaller display.

Why is this needed?

But sometimes there is a need to access the Internet on a PC through a tablet. This can be for various reasons. For example, where the computer is located, the Internet is simply not connected, or there is no way to put it there through a cable, yes and no “Three g” modem. And since it is already built into the tablet, everyone understands that theoretically it can transfer data to a computer.

Or in the room there is only wireless connectivity, and the computer, as we all know, is usually not equipped “Wi-Fi”-receiver. The tablet also has it, so it is obvious that it is theoretically possible to provide Internet access through the tablet to the computer. But knowing this is one thing, and putting it into practice is another. Therefore, in this article we will learn how to connect to the Internet through a tablet.

We must say right away that this can be done in several ways, each of which has both advantages and disadvantages. All of them will be thoroughly investigated by us, and we will also separately consider their positive and negative sides. After our little research, you will be able to decide for yourself which of the available methods is better to choose for your personal needs and needs.

Wi-Fi to help

So, let’s start with how to connect the Internet through a tablet to a wireless network. Indeed, almost all such devices are equipped with Wi-Fi, which can be turned on or off using the settings (only the cheapest copies are an exception), so it’s a sin not to use it. Imagine that you are now near a public place, the access point of which your portable device sees, or in your home there is the possibility of such a connection.

In this case, you need to go to the settings of your tablet, where to find the section responsible for the work of the Wi-Fi receiver. Activate it if it was inactive, after which the device will determine all available networks for connection. Keep in mind that there are both secure (using the set password) and insecure networks. You can easily connect to the latter, but to “password-protected” You won’t be able to connect if you don’t know the code itself.

So choose the desired network, enter the password if necessary and wait for the tablet to establish an Internet connection, which you will be informed about. When this happens, connect the computer to this unit using a special cord. Next, using the standard software, which you should already have installed on the machine, establish a connection with the tablet.

3G comes to the rescue

Now we turn to the second method of how to connect a computer to the Internet through a tablet. Almost all of these portable gadgets have support “Three g”-nets, as well as a slot for a SIM card. If this feature is not supported for you, this method will not work for you, so go on to the next one. But for the lucky owners of tablets that are equipped with such a useful function, this method can greatly facilitate life.

Mobile network coverage today exists almost everywhere. Most operators already provide third-generation Internet service in many places. Therefore, as you may have guessed, with this method, access to the World Wide Web will always and everywhere. True, the data transfer rate can be attributed to the negative side, but this can be considered a retribution for mobility.

How to do it?

So, how to connect a computer to the Internet through a tablet using this method? Everything is pretty simple. The procedure is almost identical to connecting to a mobile phone’s cellular network. Insert your SIM card into the appropriate slot on the tablet. After that, the device will configure and find its operator that provides communication and data services.

Again, go to the tablet settings, find the tab for controlling the data transfer function, and then activate it. Remember that if the device needs to enter any additional settings for the Internet to work in the gadget, you can always check them with your mobile operator. Well, then we connect the tablet to the computer using the cord and run the software.

3G modem

For formality, we will consider another method of how to connect a computer to the Internet through a tablet using “Three g”modem. It is useful to those users who do not have a built-in modem. However, let’s say right away that it’s not worth doing this, since it is possible to connect a data transfer device with a SIM card to a USB port directly, thereby gaining the necessary access. However, if due to certain circumstances you need to do this through a tablet, then read on.

Change mode

So, connect to the tablet “Three g”-modem. This can be done either directly or through a special adapter. Next, we translate the device for transmitting data into a mode called “Modem only”. This can be done using a computer (laptop) and a program called “Hyper terminal”.

When the modem is in the above mode, connect it to the tablet. In the settings of the latter, you need to activate a function called “data transfer”. Done? Fine. Wait a while until the tablet detects it and prepares it for work. After that, go to the settings menu of the access point, where you will need to create a new one. Write down all the data provided by your operator there and save the settings. Now you can use the Internet as soon as you join the computer and start the necessary software.


We continue to consider how to connect a computer to the Internet through a tablet. And the next method can be safely called exotic. After all, the connection will be through the Ethernet connector. When can this be needed? When for some reason the computer does not work or is missing a network card, and the home router does not support wireless data technology.

What do we need? First of all, an RJ-45 / USB adapter. Also, prepare drivers for the tablet, which, as a rule, come with the device. If this is not the case, then they can be downloaded on the website of the manufacturer of your gadget. Now we connect the adapter with the cable to the tablet, and in its settings we activate the wireless data transfer function. The tablet, in turn, must be connected to the computer.

“Blue teeth”

Well, it remains to consider the last method, with which I would also like to introduce you. After all, old devices can only be equipped with bluetooth data transfer technology. Install software called “BT DUN”. Run this software on a computer, then on another device and connect these devices to each other. Now the PC will be able to access the Internet through the tablet. True, speed will not please you, since bluetooth cannot provide it at a high level.

But there are reverse situations when you need, for example “organize” Internet on tablet via laptop. In this case, Wi-Fi is a great helper. You just need to connect to a wireless network created in advance on the computer and make all the settings.

That’s all the methods that we wanted to tell you about in the framework of this article. We hope one of them suits you, and you can use it.