How to connect a bluetooth speaker to your computer

Article

Connecting Bluetooth Speakers to a Windows 7/10 PC or Laptop with USB Wireless Adapter

Let’s talk about how to connect a Bluetooth speaker via USB adapter to your PC or laptop. With such an adapter you will be able to connect headphones, speaker, mouse, keyboard and other wireless devices to your PC. Bluetooth music speakers have become incredibly popular these days. And if you got yourself such a device, sooner or later the question arises. how to connect a wireless Bluetooth speaker to a computer or laptop on Windows 7 or 10 to transmit sound to it? In this article I will explain how to connect any wireless speaker to a desktop PC with a USB Bluetooth adapter.

There are several ways to connect a portable JBL speaker (in this article we will take the devices of this brand as an example) to a PC or laptop:

Wireless connection implies only the first point of the three, the other two are done through a wire. The Bluetooth connection has obvious advantages: you don’t need an extra cable, you can place the speaker at a much greater distance from the computer than the length of the cord allows.

However, when you plug a JBL speaker (say, Flip 4) into a laptop’s USB output, it will not only perform its task, but also charge at the same time. In this situation the external speaker will last much longer than in a completely self-contained mode.

connect, bluetooth, speaker, your, computer

Connecting a Bluetooth speaker to a laptop or PC

Before connecting the speakers via Bluetooth, it is worth making sure that on a PC or laptop Bluetooth itself works steadily, and there are all installed codecs (quite often, when connecting the speakers via Bluetooth, users complain about the lagging sound, which occurs due to a lack of codecs). The next steps will be as follows:

  • Turn on Bluetooth on your computer or laptop. There is a special button on the keyboard or the device case for this purpose.
  • Now on the speaker itself it is necessary to press and hold for a few seconds the Bluetooth button to enable the Pairing mode. If the mode cannot be turned on, it is worth looking at the instructions for the speaker, how to do it. On some high-end models, Bluetooth is activated by voice. An indicator light on the chassis or small screen (depending on your model) will tell you that your Bluetooth is turned on and ready for pairing.
  • Right click on the Bluetooth icon in the Windows notification bar. Choose “Add device. In Windows 10, to add a speaker, you need to go to the “Settings” branch, “Devices” and click on “Add Bluetooth or other device”.
  • Then select your speaker from the list. This will initiate the connection. You may be prompted for a pin code in Windows 10. However, this is common for expensive speakers that have a full-featured touch menu in addition to the control buttons.

The first time you connect a device, you do it manually. Then your laptop or PC will remember your speaker and will connect automatically, all you have to do is turn on Bluetooth.

How to connect a Bluetooth speaker to your phone?

The way how to connect the Bluetooth speaker to the phone will be a bit like the method for PC.

If your phone doesn’t see the speaker, it’s worth checking to see if the speaker itself is charged and if the lights on the speaker are lit, which indicate that the Bluetooth pairing is working. You should also check to see if Bluetooth itself is turned on on your phone. To do this, pull out the top curtain and look for the wireless icon.

Connecting a Bluetooth speaker to a Windows 7 laptop

First, turn on your column and put it in connection mode. Click on the “Bluetooth” button, or the power button. Typically, you need to press and hold for a few seconds. Bluetooth indicator should blink actively.

There should be a Bluetooth icon in the tray. Right click on it and select “Add device”.

A new window should appear that displays the devices available for connection. There should be our wireless speaker. It is necessary to highlight it and press “Next”.

The next step is to configure the device, after which a window should appear with a message that the device has been successfully connected and is ready to work. And if the sound after connection will not play through the wireless speaker, then you need to right-click on the sound icon in the tray, select “Playback Devices”, then right-click on the connected Bluetooth speaker and select “Use Default”. After that, everything should work.

Wireless speaker does not work.

In Windows 7, I was unable to connect a Bluetooth speaker. System finds it, detects it as a speaker, plugs it in, but it doesn’t work. No driver. If you open the connected devices, it has a yellow exclamation mark. In the device manager it will be an unknown Bluetooth peripheral. And while connecting, you may notice a message that “The software for the device has not been installed”.

I looked on the Sony site (I have a portable speaker from this manufacturer) and under “Downloads” I found no drivers. If you click on “Bluetooth Peripheral” in the manager and select “Update drivers”, it tells you that nothing was found.

I didn’t download drivers from any third-party sites, or use a driver installer program. Hopefully you will not encounter such a problem, and your speaker will be friendly with Windows 7. And if you know how to solve this problem, I would be grateful if you write about it in the Комментарии и мнения владельцев. And in general, go to Windows 10. It’s better, and there are no such problems there.

The process of connecting a Bluetooth speaker in Windows 10, 8.1 and Windows 7

The process of connecting a speaker to a laptop or PC via Bluetooth looks almost the same as connecting to a phone:

  • Put the speaker in pairing mode: on some speakers you need to turn on the speaker, then press and hold down the Bluetooth button until the blue light flashes (for example, on JBL, Harman/Kardon), on some. hold down the power button in the same way after turning on. There are other methods: for example, for Yandex speaker you should say: “Alice, turn on Bluetooth“.
  • Next step: right-click on the Bluetooth icon in the notification area and click “Add Bluetooth device”.
  • If there is no icon, but Bluetooth is enabled, you can go to Control Panel. Devices and Printers. Add device. And in Windows 10 also in Settings. Devices. Add Bluetooth or other device. Bluetooth.
  • Once you click on “Add Bluetooth or other device. Bluetooth” in Windows 10 settings or “Add Device” in Control Panel, it will start searching for new devices, including Bluetooth. Select the desired device (sometimes it may appear without the name of the speaker, but just as “Sound” or “Audio”).
  • Usually a PIN code is not asked to connect. But if prompted, try entering 0000 (four zeros), and if that doesn’t work, look up the speaker‘s instructions.

When you’re done, you’ll get a Bluetooth speaker connected to your laptop. In the future, as long as it is paired to this laptop, the connection will be automatic (as long as it is not paired to another device).

For sound to be output through it, you may need to go into the sound settings and select an output device, or do it in the recording and playback devices (see. How to enter the recording and playback devices Windows 10).

Speakers with a built-in microphone can also be used for communication: you will need to turn on the device by default in the Record tab, and for some programs, such as Skype, set up a microphone in the program settings.

How to install and connect speakers with wires directly to your computer

Connection of any external acoustic system to PC is done via sound card. It usually has the following ports:

  • Audio Out (marked green). for outputting stereo sound through headphones or active speakers (with built-in amplifier);
  • Audio In (marked in red or pink). for connecting microphones or devices from which sound will be recorded (converted from analog to digital to save as a file);
  • Line In (marked in orange) is the line output, in most cases it is used as an auxiliary output when connecting the speakers of type 5.1 (if the sound card supports this feature).

That is, to connect an active speaker to the PC it is sufficient to connect it to the 3.5 mm output. Audio Out. Naturally you must first install the sound card driver (if it is integrated on the motherboard the software is included on the motherboard installation disk).

It is strictly forbidden to connect speakers without an amplifier directly to the sound card output! Because of the high resistance it causes extremely high load on the audio chip, so it instantly fails (less often it is accompanied by burnout of the capacitors that are responsible for the “equalization” of sound). In this case, the correct connection is as follows:

  • Plug an external amplifier into the Audio Out PC jack. As a rule, you need a 3.5 mm cord. 3.5mm.” (Daddy to Daddy circuit). In some amplifiers a “3.5mm” cable is used for it RCA” (tube with a red and white tip). Make sure that the cable is connected to the interface labeled Audio In in the amplifier (i.e. sound from PC goes to amplifier and not vice versa).

All manipulations should be performed with the devices (both PC and amplifier) switched off. And before you turn them on, it is advisable to double-check that everything is plugged in correctly. Quite often amplifiers are equipped with many ports which look the same, but have different functions. Here we have Audio Out jacks on your PC and Audio In jacks in your amplifier!

There are also some speakers that have 3.5mm jacks on their speakers. no connector is provided. They are connected to the PC via USB. Technically speaking, these are the same active speakers, but they also have a built-in sound card. In Windows 10, when you connect them, the operating system automatically disables the built-in audio chip. But in Windows 8, 7, Vista, XP you usually have to do it yourself. It is performed as follows:

Windows also can work with two active sound cards, but such a configuration often causes malfunction multimedia players, other applications. And before you set up speakers on your computer with Windows 7, it is not superfluous to check for the latest drivers for the sound card. Especially if the connection is made through adapters like 6.3 mm. to 3.5 mm. (6.3 mm jack. Mostly found in microphones, studio speakers).

What to do if you have a PC?

It just so happens that the PC has no built-in Bluetooth function. And you can not connect your speaker to the computer. But it’s not all bad. You can buy an adapter for a small fee. You can always find it in specialty stores. Connect the Bluetooth adapter in the USB slot and voila! Your PC has a wireless personal network.

Dear Readers! From our short article you have learned how to connect the speakers and how to connect a wireless speaker to a laptop in all the sophisticated ways. In the same way you can connect the speaker to your smartphone.

We want you to remember one rule: You are the only one who should hear your music. Turn it down, don’t disturb your neighbors. In no case you should not turn on the music, when walking on the road. It’s terribly annoying to passersby and makes a bad impression of you.

All the best! Subscribe to our updates to read useful and

In this tiphack you’ll learn how to connect a speaker to a laptop by bluetooth JBL or any other, as well as get answers to related questions.

Wires are becoming a thing of the past, it’s the era of wireless devices. mice, keyboards, headsets, even chargers, all of which in time lose the extra meters of cords and life becomes easier. Unfortunately, progress is not synchronized with all devices and there is still no possibility to connect a Bluetooth speaker to a laptop, and on Windows 7 or even 10 there is still no friendly connection interface, everything is quite complicated.

Why to use a portable speaker

The vast majority of laptops, in terms of sound quality, to put it mildly, not very. As a rule, they are equipped with small speakers that not only can not play loudly enough, but also with low frequencies almost do not cope.

It is still acceptable for watching movies, but it is not good enough for music.

With any portable device. laptop, netbook, tablet or smartphone, the best solution is a portable speaker with built-in battery or running on batteries.

Connecting a JBL or any other speaker to a laptop is not difficult, no matter what OS is installed. Windows 7, Windows 10, “Eight” or Vista.

Almost all modern laptops have a built-in Bluetooth transmitter, which can also connect a mouse, keyboard, gamepad or headphones. In this case, the installation of drivers and complex manipulations with the settings are not required.

When connecting the wireless JBL to a PC, things are a bit more complicated. as a rule, there is no “blue tooth” in the desktop PC. Additionally you will need to buy a universal adapter, which connects via USB.

It is worth noting that a similar “gadget” from a wireless mouse or keyboard, most likely, will not work. it simply will not connect to the speaker, as designed only for the connection of the “native” device.

As a rule, the universal adapter is a plug-n-play device, so it will immediately install the drivers after the first connection to your computer. Otherwise you will have to install them yourself from the disk that came with the package.