How to configure Apple airport extreme

Setting up the Apple Airport Express Router. Connecting to a Computer and Setting up the Internet over WI-FI

Today we will look at how to set up an Apple WI-FI router. It’s always nice to talk about how to customize something from Apple. I remember the first time I saw an Apple router, I was blown away! The thing is, we don’t even need to go into the router settings web interface Aplle router simply does not! And this means that we do not need to fill in a bunch of complicated and unclear parameters and get lost in a pile of different tabs, configure connections with the router and modem prescribing static ip-addresses. Apple is trying to keep things simple, so much the better, and even if that concept lacks some advanced setup options, then the hell with it, you can buy another router if you want! All the twists and turns, which are present in most other manufacturers’ router firmware, will only fit 5% of gur-buyers, and 95% of average citizens want to do so: bought, pressed the button, everything worked! Aplle understands this very well.

So how to set up an Aplle router? Everything is done through a single AirPort utility.

Airport is a utility for installing and configuring WI-FI points for the entire series of Aplle AirPort routers:

AirPort is installed by default on all MAC-Apple operating systems.

AirPort is also available for other operating systems: Windows, iOS, Snow Leopard, Leopard, Tiger, X Lion.

Let’s move on to configuring the routers, Extreme, Capsule and Express, with AirPort.

The first and last thing we need in order to configure the router is to run the AirPort utility.

I demonstrate it with the Express router, but as I said it’s the same for Extreme.

AirPort is located at Programs, Utilities.

Click on ” AirPort Base Stations” after launching.

Choose our AirPort from the list (depending on whether you have Extreme, Capsule, or Express).

Configuring the settings for your router, you have, respectively, Extreme or Express.

Set the network parameters, so that no one would be able to connect, click Next.

Wait while you apply the settings In your case it will be Extreme.

The configuration has been completed successfully. Click Finish.

Done, now if your provider has the required settings, you will have the internet automatically! precisely, I mean if you lived in the U.S.

Ours are not looking for easy ways, and now let’s figure out how to configure the connection PPPoE or Static IP-address.

The circle is yellow, it means that there is no connection to the Internet.

Click on our access point and click on the “Change” button.

Next, fill in all the necessary details, depending on your type of connection, I think there will be no problems. If you do not know what type of connection your provider provides, ask his technical support or look in the contract, as a rule, all the details of access and type of connection are specified there.

Once the configuration is complete, click “Refresh”, wait until the connection to the Internet is established.

PS Why up to such a concept have not thought of other manufacturers of network disclosure I do not understand, all simply and clearly!

I hope you have found the Aplle Airport router configuration guide useful, have a nice segue to Apple!

How to set up an airport express as a router

Apple AirPort Extreme router setup instructions Apple Airport Extreme setup instructions. Connect the router to the power supply as instructed. Open AirPort Utility.

11:00AirPort Extreme overview and setup, a reliable router

12:31AirPort Express 2013. Unpacking and Configuration

3:01How to set up an Airport Express router | Wi-Fi | Basic.

5:43AirPort Express. WI-FI from Apple

Apple router configuration guide : Help.netbynet.Home Internet ” Router Setup Guide ” Apple Router Setup Guide. In AirPort Utility, select the “Airport” tab at the top. Subnet Mask, Router Address (Default Gateway) (this data.

How to configure Apple Airport Express Router in 3 steps. By the way, this manual will also work for the Airport Extreme model. Installing the Apple Airport Utility. First of all surprise.

How to set up airport express as a routerHow to set up AirPort Express?To set up AirPort Express with your iOS device, do the following. 1 On the Home screen, tap Settings, Wi-Fi. 2 Tap the name of your AirPort Express station. 3 Follow the on-screen instructions to create a new network or connect to an existing one.AirPort Express Setup Guidei.citrus.ua rukovodstvo_polzovatelia_Apple_expressi.citrus.ua rukovodstvo_polzovatelia_Apple_expressPDFSearch for: How to set up AirPort Express?

How to configure your Airport Express router The Apple AirPort Express does not have a personal web interface, and the user setup needs the proprietary Airport utility.

How to set up your Apple airport express router Another difference with the new router is that it has AirPlay and an additional LAN port. Apple AirPort Express does not have.

Apple AIRPORT EXPRESS ROUTER SETUP Apple AIRPORT EXPRESS ROUTER SETUP. 1. Connect a network cable (RJ45) to the Airport Express router and connect the router.

Setting up the Apple Airport Express Router. Connecting to. 1 Setting up an Apple WI-FI router in 5 minutes; 2 How to set up an Apple router: features of Apple’s AirPort Express; 3 About the design.

Recommended settings for routers and points settings for Wi-Fi routers, base stations or access points used in conjunction with Apple products.

When setting up this device, difficulties may arise:

To solve these problems, you need to contact your Internet service provider, notifying them of the router change and the name of its brand. By doing so, your ISP’s staff will help with adding your device’s IP address (which you will not be able to change) to the table of allowed connections.

If you have been told that you are a tenant of the external IP address, you need to connect the router via Static IP.

You need to re-open the proprietary utility, selecting the access point and the property “Change”. In the section “Internet” you need to choose the word “Statichn” in the line “Connect via”.”. After that, you need to fill in the columns below, specifying DNS-servers, domain name and WAN-address. All this is in the contract for the provision of services of your Internet provider. After filling in all the data click “Refresh” and wait for the process to complete. After that, close the utility. it will no longer be needed.

Setting up an airport extreme router on your mac is not that difficult. This is how easy it is to do.

Many lucky home network owners have heard a lot about such brands as Asus, Trendnet, DLink, Zyxel, TP-Link, but few have come across the Apple router.

Thought I’d share my experience of having to install it on a home network where there were no Macs, just IBM-compatible.

I do not understand why people who do not use different iPads and iPhones, as well as other creations of Apple took the fancy of this device, but, nevertheless, I was confronted with the fact that the device is purchased and needs my installation.

For old time’s sake, I tried to access it by typing http://10 into my browser’s address bar.0.0.1 (that’s the default address this “beast” lives under) and was sent a kindly inscription saying that the page does not exist, check the correct spelling of the address, etc.д. etc.п.

Indeed, this device has no web interface and to set it up requires installing the Apple AirPort Utility, which is written for both Mac and Windows, which makes things much easier. All in all, an Apple router in all Apple without any compromise. We remember that to communicate with a computer different iPad, iPhone and iPod requires the program iTunes, here the ideology is the same. Either install AirPort software or get lost.

By the way, to maybe save someone from a useless waste of money. the router does not support PPTP and L2TP. For those who do not know. providers, such as Beeline, which uses a VPN connection to access the Internet, use just one of these two protocols. precisely, the protocol is the same, but L2TP is an encrypted variant of PPTP.

I think that no one will have difficulty with the installation of the utility, so I will not focus on this. Let’s start by setting up the machine itself.

Run the program and the scanning will start automatically. Choose the only found router and proceed to setting up.

The password is better to put such a not to forget it later, t.к. Otherwise you have to reset it to the factory settings and configure it again. You can check the box Set time automatically, but it is not obligatory. Go to the tab Wireless.

In the Wireless Network Name: enter the name of the wireless network. Tick Allow this network to be extended, for the network to be visible (at least at first).

Under Wireless Security, put WPA/WPA2 Personal to ensure better compatibility with older equipment and Samsung Smart TVs, and enter the network encryption key.

Do not touch anything here, unless you want to split the user access into primary and only Internet users. This is useful in the case, if the router is used in the office. Employees use the credentials prescribed on the Wireless tab, and guests can connect to the network specified here and have no access to network resources, but can use the Internet.

If you do not want to restrict access based on MAC address, leave it as it is. Otherwise you will have to add each new wireless device manually, which is not always convenient.

In the Connect Using section we select the connection type (Ethernet or PPPoE), and in the Ethernet WAN Port we leave everything as it is.

Under Connection Sharing leave Share a public IP address, otherwise the router will only work as an access point.

Here we set whether the address is assigned automatically or manually.

In this section we set the addressing of our network. The settings provide options for local network addressing.

Setting up your Apple router

Using Apple WI-FI router you “condemn” yourself to easy setup and almost instant use of the Internet. If you have a Mac, the situation is even easier, thanks to the utility AirPort, running it will only need to specify a connection name and password. You can also set it up from any Apple device by downloading the utility from the App Store. If you, like most people, have a computer running Windows, you won’t have any problems with the configuration, using the same utility. The router uses Bonjour technology to enable wireless printing. It is designed to synchronize the work with different OS. This may be practical when you have two or more computers. There is no need to connect to the printer from different computers each time. Here everything is very simple: plug and play! In our story about the Apple router, it would be a crime not to mention the AirPlay technology. With it, you can connect any stereo directly to your router! No additional wires and adapters needed. In addition, you can manage your playlists in iTunes using your iPhone. The special application Remote allows you to move between songs, adjust the volume and a number of other parameters. All this can be done without going to the speakers, but from, say, another room. So, Airport Express is quite an interesting product, which is worth looking at. In our opinion, it will not gain recognition in Russia among average users. The device costs about 5 thousand, which is too much for the relatively modest functionality offered. Focusing on Apple hardware and software is also a big disadvantage. The undoubted quality and branded design will mostly attract only brand fans or those who don’t want to bother with the settings, but want to get a stable and high-speed internet at once.

Login to the program and a quick setup

When you connect to the router, do the following on your computer:

Launch the installed AirPort utility. If a “Firewall” message box appears, select the two network types (private and public) and click on “Allow access”.

Allow full access to the program in the warning window

Set the password on your router settings

Highlight the first option for creating a new wireless network and click the button in the lower right corner

Create a complex password for your Wi-Fi access point

Select Share a single IP adress using DHCP and click Continue

Choose between dynamic and static IP in the first drop down menu

Click on Update to save the changes

Wait for the router to reboot and save any changes you have made

Configuring the router

In the next chapter we will look at how to connect the iPad to the router. AirPort Extreme configuration is done only with the help of a special program, which is already included in the standard set of programs of Mac OS X operating system. There is also an additional version for Windows which can be downloaded from the official Apple website. http://www.Apple.com/en/. Let’s take the Windows version as an example.

The router can be set up in two modes. the step-by-step mode, which sets up the basic settings of the device, and the full access to all functions for more advanced users. Besides the settings themselves, this program allows you to reboot the router, save the changes made, restore factory configuration, connect and display a list of wireless clients, see the logs of recorded work. After making changes in the settings, it is necessary to update the configuration of the device by clicking the “Update” button in the window. Updating lasts for about a minute, at the end of which the router will automatically reboot.

The router’s log window At the top of the settings window are five icons with links to settings. “AirPort”, “Internet”, “Printers”, “Disks” and “Advanced.

AirPort Menu

Clicking on the first of them takes you to the device status page. You can see the firmware version, serial number of the router, MAC-addresses of all interfaces, the status of the Wi-Fi module and other. The iPad 2 router is equipped with an internal clock that can automatically synchronize the time with a time server when it detects an internet connection. AirPort will also check for new firmware for this model of device when it detects a connection to the Internet, and if found, the LED on the front panel of the router will start blinking.

The wireless part of the router Router is designed as a two-band access point (2.4 and 5 GHz). It is noteworthy that both frequencies can be available simultaneously. On the “advanced settings” page we can limit the wireless transmission power or hide the SSID (wireless network name).

Additionally you can create a guest wireless network with limited rights. with your own network name and other security settings. The clients on this guest network will only have Internet access, but they won’t be able to connect to the Apple AirPort Extreme setup.

Configuring

To configure the AirPort utility is used, it is available for OS X and Windows, there is also a quite handy application for iOS. I configured Extreme for work with ADSL-modem (MGTS Internet), as you can see, here everything is as simple and accessible as possible, you just need to enter your login, password, set access point name, set password (if needed). After that there is a reboot, the indicator light is green. If you’ve used other access points and you’re afraid of complicated setup like you’re a dentist, welcome to the twenty-first century. it’s as simple and straightforward as possible.

I was in a store recently where a person was trying to buy an Express, and I was horrified at the questions the salesperson was asking. It looks like you have your iPhone in your hand and your iPad sticking out of your bag. He seems to be an adult. But the dialogue was strange. The buyer wanted to know if it was possible to connect more than one device to the access point? Do I have to enter the password every time I come home?? Would the speed be okay? Or half to three times slower than a cable connection? And it’s true, the access point can distribute the Internet to three devices at once? There was no faith in his eyes, and the salesman’s answers were met with disbelief. It was like he was telling the native about airplanes and the third transport ring.

Of course, the customer doesn’t need to know anything, that’s understandable. But here’s the simple idea: with the AirPort Extreme, it’s really easy to create a wireless network at home and use it to connect all kinds of devices. smartphones, tablets, laptops, gaming consoles and so on. In the countryside I have the old Time Capsule and the hard drive has been alive for several years with no problems at all with the operation or restarts, and at home I have the latest generation Express, a small box that has been faithfully used for about a year. no problems either.

It also has a guest networking feature, great for those times when you have a lot of strangers in your house so no one messes with your network drives. Internet only. There’s also a firewall and, of course, support for all standards devices: “The new base station is compatible with devices using 802.11a, 802.11b, 802.11g, 802.11n and 802.11ac”. A few words about 802.11ac, Apple already has laptops that support this standard, the new MacBook Air. While I’m waiting for one to test, I’ll also tell you how it will work with the Extreme. With the MacBook Pro 15 Retina, the speed has increased, you can see it very clearly even when watching YouTube videos. I also want to note that the new Extreme restarts much faster than the old one.

About 802.11ac write the following: “Fully upgraded AirPort Extreme with 3-stream 802.11ac pushes the boundaries of Wi-Fi speeds. Wi-Fi speeds are now much faster than the previous 802 standard.11n.1. And if you’re using 802 devices.11a/b/g/n, AirPort Extreme takes their connection speeds to the max. How to use this speed is up to you”. Supports up to 50 simultaneous users, let alone a typical home user. Two iPhones 5, two iPads, two MacBook Pro, a Sony PS3 and an Apple TV. All devices on the network, and this is certainly not the limit. The most interesting thing is that when you connect a Sony laptop, the speed drops noticeably. What it is, it’s hard to say. Probably Windows is to blame again. If you want, you can also use the Extreme to connect with a cable, in principle, you can connect a set-top box that way, it makes sense.

Airport Extreme review

Externally the router is a tower of white, which is quite different from what we’re used to seeing as a Wi-Fi router. The Airport Extreme is beautiful in design and consistently rich in features inside. first of all, it has as many as six antennas for 2.4 GHz and 5 GHz bands, and it can operate in both of them simultaneously.

High data transfer speeds are the main point of emphasis of the builders which is ensured by the support of 802.11ac, working up to four times faster than 802.11n. The aforementioned antennas have an even better effect on speed, but in addition, they provide excellent signal coverage and literally direct their “waves” to where the equipment is connected to them. this is possible thanks to the adaptive beamforming feature.

Such powerful work undoubtedly requires an excellent ventilation system. and it is indeed provided inside the Airport Extreme, but what’s nice, it works quite quietly and doesn’t irritate the user in the vicinity.

Coming back to the exterior design, which has a stylish minimalism, it is advisable to pay attention to the functional features of the Airport Extreme. On the front there’s a functioning indicator. a simple and inconspicuous light that lights up green when the router is working fine, turning red in case of a malfunction.

The rear panel of the Airport Extreme has the following connectors:

• At the very bottom is the socket for the network cable, which is a practical solution, since it won’t interfere with the rest of the sockets.
• Above that is the WAN socket for the internet connection.
• Next is a USB port for connection to a printer or a hard drive. the previous version of the device did not have the ability to connect an external drive.
• Three Gigabit ports for connecting equipment via LAN format, which provide high-speed data transmission over the local network.

In addition to the above components, there is a small button on the side to reset the settings, which is present by default in all network routers.

Owners reviews

Pretty interesting reviews on the Apple Airport Extreme router. They are more like recommendations that reveal the hidden capabilities of the device. Owners assure that there’s no reason to mount the gadget under the ceiling for better signal transmission. great work directional antennas are able to deliver a powerful signal to the user through several solid walls without any help. Often users recommend connecting NAS systems to the gadget instead of an external hard drive, which integrate perfectly with this router.

It doesn’t support torrents and can’t work with private virtual networks. No problem. you can buy an inexpensive router on the secondary market and create a serial connection “point-to-point”, where the role of routing and downloading torrents will be given to an inexpensive device, and the rest of the load will be on the Apple router. There are a lot of options, if the owner wishes.