How To Check Dead Pixels On Samsung Tv

Troubleshooting methods

Black pixels, as stated above, are the result of damage to the transistor. It is impossible to fix this without replacing the specified components. And it’s not that it’s impossible to do it at home, but in the laboratory it’s difficult. But the colored dots, the true “broken” pixels, try to eliminate yourself really.

There are two ways to solve the problem: programmatically and manually.

What it is?

The creation of a liquid crystal display is technically difficult. Therefore, problems associated with poor TV performance cannot always be solved on your own.

Some popular physics:

• LCD-screens (on which dead pixels can appear) are “ergonomic”, therefore, thanks to them, TVs have become thinner;
• Such screens conduct electricity better, as a result, better signal;
• The radiation level in these devices is lower;
• The entire outer surface of the LCD TV display matrix is ​​divided into small dots, which are called pixels;
• It is the pixels that take on the function of visualizing the change in orientation and constant movement of liquid crystals under the influence of an electric field;
• In a normal state, the pixels are not visible to the human eye, but if they are deformed, then this becomes an obstacle to viewing.

Directly broken (or dead) pixels on the screen will be those whose control transistor has become faulty. These pixels don’t glow, they just stay black. These elements fly out of the matrix grid. Against a white background, such pixels look most noticeable.

Do not confuse dead pixels with frozen ones. Stuck is an element that glows red, green, blue, or white. They are clearly visible on a black background. There is such a “freeze” when the subpixel “slows down” during the color update.

How to check?

You can and instrumentally check the device for defective pixels.

• Dead Pixel Tester. This is one of the simplest and most popular Windows utilities. After starting it, you should set the mode, then just inspect the screen.

• Injuredpixels is another free and easy-to-use Windows application. You can switch colors with the mouse or special arrows.

• Dead Pixel Buddy is an online diagnostic and treatment service in a set of colors. Works in all browsers, mobile also loads well. It’s important not to forget to make full screen mode.

• LCD DeadPixel Test is another handy proven online assistant. A color is selected, the window is expanded to full screen and everything is checked according to the same scheme as suggested by the programs above.

Basically, the consumer will have to rely on their eyesight, because if the buyer has problems with this, then it is worth taking someone with him who is confident in his own vigilance.

Attention! For new TVs with a large diagonal, the pixel response time should be between 5 ms and below.

Program

Recovery is possible due to a quick change in the colors of adjacent points. We can say this: at this time, the subpixels receive a large amount of energy, which allows them to be “revived” and repaired. Such technology can help to restore at least half of the “broken” points, and sometimes all 90%. But in time, each time the recovery process takes a different time. It is also possible that the restored pixel will “get stuck” again (this happens especially often in the heat. Under the influence of temperature). That is, there are cases when it is impossible to completely “cure” a broken pixel.

Let’s list the programs that help to remove the “broken” pixels.

• Undead pixel. The program offers to first find deformed pixels by filling the screen; “defective” elements will be visible on different backgrounds. When the diagnosis is made, you can take directly for the “treatment”. First, it is prescribed to set the parameters with the number of squares, then select the size of one square in pixels and set the rate of their update according to the sample. After the start, flickering squares move to defective places. When the pixel flashes, it is already a success. You just need to wait for the “stuck” pixel to disappear. True, if you have to wait more than 10 hours, most likely this particular pixel will not recover.

• Jscreenfix. This is a site, not a program, but free and convenient. It restores pixels in much the same way as the previous tool does. But the parameters cannot be changed during the operation, just as it is impossible to work on a computer at this time (when it comes to restoring pixels on the monitor). The service identifies an area with digital noise, it can be moved to the required area of ​​the TV.

• Pixelfixel. This is a YouTube and needs to be played overnight. The duration of the is 12 hours. The colors in it change so quickly that a person can easily get dizzy (there are warnings even about epileptic seizures). But none of this will happen if you just do not look at the monitor while the restore roller is running.

You should try those that are clear in the instructions. If an advertisement promises to get rid of defective elements in 10 minutes, you should not be carried out on such a promise. Such a quick “treatment” is not always possible, and the initial “diagnosis” decides a lot. Mostly popular programs work by quickly cycling colors.

Broken pixels on TV: what is it and how to remove it?

1. What it is?
2. How many dead pixels are allowed?
3. Reasons for the appearance
4. How to check?
5. Troubleshooting methods
6. Program
7. Manual

In all liquid crystal displays, the resulting picture is formed by pixels. The pixel grid is the three separate pixels of red, blue and green that are responsible for the full image formation. And for each such subpixel there is a transistor, it controls its on / off. Broken pixels on a TV are a problem that theoretically every consumer can face. And it would be nice to know what it is and how to fix the situation.

Reasons for the appearance

There are many reasons why a pixel can become deformed. Of course, in some cases they amount to a violation of production technologies. If the technological process is violated, then the defectiveness of the final process is more than possible. But such cases are usually not difficult to establish with the help of technical expertise.

Other causes of dead pixels:

• Overheating / overcooling of the TV. Very high and very low temperatures force the subpixels to solidify, and therefore they can no longer move inside the liquid crystals;
• High humidity. Such conditions are dangerous for the LCD substrate, as soon as moisture enters the matrix, there are overexposed areas or white dots;
• Voltage drops. A power failure can damage the transistor, which is why the energy supplied to the RGB matrix forces the subpixels to fix in a certain position (freeze);
• The use of a screen to display static content. If the TV shows the same picture for a long time, the display transistor may burn out, and the crystals “freeze” because of this.

Finally, damage to the matrix cannot be ruled out during the careless transportation of the TV. And although a firm fixation is organized in the substrate, sharp mechanical shocks can damage the liquid crystals.

Broken pixels on the TV

TV production technology is constantly evolving. It’s safe to say that we live in a generation of plasma and liquid crystal panels. The well-known bulky cathode ray tube televisions are out of fashion. And this is not surprising, because modern TVs are much ahead of their predecessors, both in performance and in build quality and a number of other parameters.

But as they say, each technique has its drawbacks. In this article, we will discuss an important issue regarding dead pixels on plasma and LCD TVs.

What is a dead pixel on a TV

Simply put, the image on a TV panel is formed from a huge number of colored dots, called pixels. The principle of operation of a plasma TV, of course, differs from the principle of operation of an LCD TV, but the structure of image construction is the same in both cases. Pixels change their color in a predetermined way, as a result, the desired picture is obtained.

Each pixel has its own strict structure. Pixels are made up of three subpixels of different colors. Red, green, and blue can have different intensities and can create any color. Most modern TVs use an active matrix. In this case, each individual pixel is controlled by a special transistor. If the transistor fails, then the corresponding pixel ceases to function. This is called a broken pixel.

Such a pixel looks like a black dot on the screen. A broken pixel of this type can be restored only by replacing a faulty or malfunctioning transistor. This method is poorly suited for ordinary users.

There is another type of dead pixel. Stuck pixel. A characteristic feature of such a pixel is the fact that it looks like a bright spot on the TV matrix. This is due to the fact that the subpixel “gets stuck” in one position and only glows in one color. Pixel defects of this type can be corrected at home using specialized software or by physical manipulation. The question involuntarily arises: why do you need to repair dead pixels on a TV yourself, if there is a warranty service?

The answer is very simple. The production of panels without dead pixels is almost impossible, if you set up production that does not allow such a defect, then the cost of TVs will increase significantly. Therefore, TV manufacturers have adopted specific standards, according to which a certain number of dead pixels on the matrix is ​​not a defect and cannot be repaired. There is a generally accepted state standard ISO-13406. According to this standard, there are three main types of dead pixels, and all panels can be divided into 4 classes. So the types of broken pixels:

1. On a dark background. A white pixel.

2. On a light background. A black pixel.

3. The pixel is constantly lit in one color (problem with subpixels).

First class panels do not allow dead pixels. If there is at least one broken pixel, then you have the right to a warranty panel replacement.

Panels of the second class allow the presence of two defects of the first and second types, as well as five defects of the third type. It would be appropriate to say that such panels are the most common in the modern market. If your brand new TV has a second-class matrix and a couple of broken pixels, then this is not a marriage and do not wait for a replacement.

Panels of the third class allow the presence of five defects of the first type, fifteen dead pixels of the second type and 50 of the third.

And finally, the fourth class has the largest range: 50, 150 and 500 bits of the first, second and third types, respectively.

Check TV screen for dead pixels

For example, if you are looking for black dots, then display a white background. If you are looking for a white point, then display a black background, and so on. If you carefully examine the entire screen, then the dead pixel will be visible to the naked eye. The method is painstaking, but reliable. As the saying goes, everything is in your hands.

There are special generators that display images of the corresponding color. The same can be done by downloading pictures of the corresponding colors prepared in Painte from a USB flash drive to the TV. A similar function can be built into your selected TV model. Ask the seller about it.

functional is the way to check for dead pixels using programs. But for this you need to first connect a computer or laptop to the TV. Download the appropriate program for checking to your computer and search for defects. I would like to highlight a functional utility Nokia Monitor Test, which will help to detect defects and dead pixels on the TV panel.

Recovery of dead pixels on a TV

The sad news is that black pixels (the transistor burns out) cannot be restored with our own efforts. It’s about recovering stuck pixels. There are several ways, they will not give 100% effectiveness, but it is always worth trying.

The first way is to physically target the malfunctioning pixels. Turn off the TV, and using a cotton swab, very gently press on the area where the dead pixel was detected. A few minutes and stop, turn on the TV and evaluate the result. Repeat the procedure if necessary. This method is intended for LCD panels, mechanical impact can move the liquid crystal and the pixel will begin to function normally. Do not use sharp or sharp objects as this will further damage the matrix.

A more gentle and safer way is to use specialized programs. One of these is located at jscreenfix.com/basic.php. According to the developers of the utility, after 20-30 minutes of using it, the problem with stuck pixels is resolved. If there is no result, repeat the procedure after a few hours. What does the miracle program do you ask? This program changes colors around a dead pixel at high speed, which allows you to programmatically solve the problem.

Go to the above site and click Launch. After launching the program, you will see a window with flickering pixels. Hover it over the area of ​​defects and wait for the results. This program may require a license purchase. But there are other similar utilities.

In this voluminous article, we have covered all the questions regarding dead pixels on a TV. If you do not want to solve the problem with pixels at home, then after finding them it is better to turn to specialized services. Good luck, we hope the article was useful.

Recovering dead pixels on screens

Summer has begun, heat and new fun. I have a one-room apartment and, think for yourself, I decided to put a second computer in the kitchen with a 19-inch TFT monitor! And what does summer have to do with broken pixels? And here’s what. 36 degrees outside, the stove, oven and high humidity did their dirty work. A couple of dead pixels appeared on the monitor.

Dead pixels are constantly glowing or vice versa. Non-working dots or parts of dots (sub-pixels) on the monitor. If the pixel does not work at all, then it always looks black and is noticeable only in white and light colors. This is the most harmless kind of dead pixels, but it is practically impossible to treat.

The most common broken subpixels are when a bright red, blue, green, yellow, teal or magenta dot is constantly lit. They are also called “stuck” pixels (stuck pixels). If such a pixel comes out in a conspicuous place, it is very annoying, especially the red # 128578; If all three subpixels are buggy, then a white dot will glow on the screen.

By the way, defective pixels can either appear or disappear by themselves. On my main monitor from the purchase itself, there were three multi-colored dots in the middle of the screen. When buying, I either did not notice them, or they appeared already at home, I don’t know. But I did not bother on this score, because they were absolutely invisible to the eye, if not peering. For 4 years of working with this monitor, I never noticed them, although they were in the middle of the screen.

I think this is due to the fact that my monitor is on the MVA matrix, and not on the common TN. Probably, the specificity of the matrix is ​​such that small defects are not noticeable. So, I recently decided to check if these pixels can be removed in a new way. Began to check. But they are not! All have gone somewhere in formation # 128578;

Dead pixel recovery software

There is no need to talk about high-tech methods used only in laboratories. Is it possible, in principle, to get rid of multi-colored dots at home? Yes it is possible! And I was convinced of this myself. There are two ways to eliminate dead pixels. Software and mechanical.

The restoration is carried out by quickly changing the colors of adjacent pixels. Thanks to this process, a large amount of energy is supplied to the subpixels and they come to life. This technology promises to recover from 55% to 90% of “stuck pixels”. True, each case may take a different amount of time, you will have to experiment if you cannot remove the damaged pixels with a raid. Experiments mean changing the speed of changing colors and running the program.

The recovered pixel may get stuck again after a while, especially in hot weather. Then the treatment process will need to be repeated. In some cases, such a pixel cannot be completely cured.

Undeadpixel will fit most

Go to the official website and download the program installer. I recommend the installation version, not the portable one.

In the main window of the program, it is suggested to begin with finding dead pixels by filling the screen with solid colors: red, lime, blue, white, black and yellow. Different broken pixels will show up on different backgrounds. If you already know where your pixels are, then immediately proceed to restore.

Udpixel works like this: a square appears in which colors change quickly, i.E. There the pixel recovery algorithm works, and we need to move this square to the problematic place of the screen. In the “Undead pixel” section, you need to set the parameters:

• Flash windows. The number of squares, i.E. How many problem areas are you going to treat at the same time
• Flash size. The size of one square in 1×1 or 5×5 pixels. Since it is very difficult to set a 1×1 square exactly 1 pixel, a 5×5 area is suitable for restoring even one pixel.
• Flash interval. Pixel refresh rate by algorithm. The shorter the time, the faster the speed. Maximum speed at 3 ms.

Click Start and move the flickering square (s) to the defective spots, see below. When the pixel starts blinking, then this is already an application for victory, just leave it for a longer time. If everything is unchanged, then select the maximum speed and wait until the pixel disappears. In worst cases it can take 10 hours, there is no point in waiting any longer.

The peculiarity of UDPixel is that during pixel recovery, you can continue to work if the squares are not large and do not interfere.

Jscreenfix for browser

This is not a program, but just a website, a free service on the Internet. Thanks to this, JScreenFix can be run on any device with the Internet: computer, laptop, tablet, MacBook or LCD panel.

Scroll down the page and click the Launch JScreenFix button. The JScreenFix script restores dead pixels similarly to UDPixel, only without the ability to change the parameters, and it will not work at this time to work at the computer.

You need to move the iridescent square to the problematic pixels, and if they are outside the browser window, then switch to full screen mode by clicking the green button. Check out how Undead Pixel and JScreenFix work:

Going deeper into the details

Defective pixels

It is quite easy to identify a completely inoperative pixel, but a partially defective one is much more difficult. Each pixel is formed from three subpixels (red, green, blue). If one of them stops working correctly, then the dot on the screen will glow with the wrong color. over, in order to catch the “saboteur”, you sometimes have to tinker. Try to see the ill-fated point, for example, on the 50-inch screen of LG 50UK6510PLB! Fortunately, you don’t have to arm yourself with a magnifying glass: it is enough to prepare a USB flash drive with test pictures in advance that will identify the pest in any color range. Rarely, but still there are pixels that work incorrectly only periodically (when a neighboring point lights up with a certain shade). You can catch them using patterned pictures: with stripes, a grid, evenly alternating shapes. Incorrectly functioning elements will stand out in the general row. For testing a 4K display, this selection of images comes in handy.

Backlight uniformity assessment

Full-screen black fill will help you evaluate the uniformity of the backlight. It is necessary to pay attention to the presence of “overexposed” areas in different parts of the display. Some differences are allowed on LCD TVs, but if white spots are clearly visible on a black screen, this is a reason to look for a more successful copy or another model. As in the case of dead pixels, most manufacturers do not consider this a defect, so it will be almost impossible to exchange a TV based on uneven backlighting.

Detection of colored “spots”

White fill is no less important. Here it is required to assess the presence of colored “spots” on the screen. Most often they look like pinkish or greenish areas on an even white color (the so-called tint). This “coloration”, which has arisen in the matrix, will remain on top of the main image, therefore, devices with such a defect should be avoided. As in previous cases, many manufacturers will not consider the presence of “spots” a sufficient reason to exchange or repair the TV. At the same time, it will not hurt to check for banding, which appears in the form of stripes of a different shade. When watching regular TV programs, it will be noticeable in uniform areas as you move the camera. To identify this drawback, you need to submit a uniform field of any color (gray, green, purple) to the screen from the same flash drive.

Technically, tint, highlights and banding are not marriage or breakage. It is almost impossible to find an LED TV without them. But the intensity of interference can be different. You should choose a device with minimally pronounced image defects.

“Pencil” test

Despite the assurances of marketers who paint cosmic refresh rate figures in technical specifications, finding an “honest” 100 Hz TV is still difficult today. If before buying it was not possible to accurately determine the model of the matrix and find out its real capabilities, the popular “pencil” test will come to the rescue. To carry it out, you will need to submit a very light picture to the display, preferably white. Then take a pencil or any long and thin object and wave it in a semicircle 10-15 centimeters from the screen. If the individual contours of the pencil are not visible, there is no flicker. If you can see several “pencils”. The manufacturer has clearly drawn a zero to the real sweep frequency, and the flickering of this instance will tire the eyes during prolonged viewing. You can verify the effectiveness of such a test using the example of the Samsung UE40MU6103UXRU 100 Hz display, placing it next to any 50 Hz model.

Sound check

There is no need to place high hopes on ten-watt acoustics squeezed into the thin case of a modern TV. Of course, the speakers with the Sony Bravia KDL40WD653BR bass reflex sound quite decent for their dimensions, but they cannot promise the level of a home theater. Therefore, it is enough just to check the sound for rattling using high-quality samples. At the same time, it makes sense to test the smoothness of volume control from the remote control along with the instant mute function.

Checking the connectors

USB ports are simply tested with the same flash drive with pictures to identify dead pixels. If the TV has two or more connectors (like, for example, the LG 43UJ630V), nothing prevents you from checking all of them one by one. If you plan to use Smart TV with a keyboard and mouse, it is better to take them with you. It may turn out that even if the USB connectors are known to be working properly, the existing kit will not be compatible with the TV. Here you have to either put up with it, or find a suitable replacement without leaving the checkout.

The headphone jack can be checked even with a smartphone headset. Its capabilities are quite enough to get a general idea of ​​the performance of the 3.5 mm jack. Well, if you don’t want to bother with the wire, then we take our wireless headphones and test the Bluetooth connection, since modern TVs are equipped with such an interface. And to unfold the 49-inch screen of the Samsung UE49MU7000UXRU hanging on the wall every time you want to watch a movie with headphones is a dubious pleasure.

Network check

Ears on the crown

Upon receipt of the TV package, please check:

Often the list of standard accessories is not limited to the remote control: for example, the Samsung UE43M5513AUXRU is equipped with an angled antenna adapter that allows you to hang the TV close to the wall. In order to avoid unnecessary costs and loss of time, it is better to immediately check if everything is in place. If at this stage everything turned out to be in perfect order, and the body shines from protective films and seals, you can proceed to the main part. Checking for operability.

Conclusions

What pixel defects are there

Any abnormal pixels visible against the general background are called broken, but this is not entirely correct. Really broken or dead pixels are only those in which the transistor has failed. They do not glow with any color and just remain black, falling out of the matrix grid. Clearly visible on a white background.

Left and right pixels are frozen, in the center. Broken / digital-boom.Ru

There are also frozen or stuck pixels. These are red, green, blue or white dots that are clearly visible on a black background. They occur when subpixels freeze when updating color.

1. Program method

The method consists in the cyclic output of rapidly changing images, which, due to frequent color changes, increase the chance of returning the hung pixels to the ability to switch again.

There are many options for implementing this method through utilities, online services, and even YouTube. They can be used on a computer, as well as on a TV when connecting a PC with an HDMI cable.

• Bad Pixel is a professional paid utility for Windows, the creators of which promise to remove defective pixels in just 10 minutes.
• Deadpix is ​​a universal program for Windows and Android that helps you find and then fix problem pixels using color cycling.
• Pixelhealer is another utility for Windows. Eliminates stuck pixels with fast flickering RGB colors.
• Jscreenfix is ​​an online service to run on computer, TV and mobile devices. Outputs an area with digital noise that can be moved to the desired area of ​​the screen.
• Pixelfixel is a 12-hour YouTube that is suggested to run and leave overnight. Attention! The colors change at a very high rate and can cause an epileptic seizure. Do not look at the screen, but rather turn it to the side.

How to check the display

You can visually determine the absence of defective pixels upon close examination on a solid white, black, red, green and blue background. To do this, you need to download such pictures to a USB flash drive and play them on the device you like. If none of the dots are out of the general color, then everything is in order with the screen.

Another option is to use special software if you can run it. In fact, these are the same color pictures, but in a more convenient format for applications or online services.

• Dead Pixel Tester is a simple open source utility for Windows. After starting, you need to select the mode and carefully look at the screen.
• Injuredpixels is another free Windows app. Colors are switched by mouse or using arrows.
• Dead Pixel Buddy is an online color checker tool. Works in any browser, including mobile ones. Don’t forget to enable full screen mode.
• LCD DeadPixel Test is another online service. Choose a color, expand the window to full screen and check.

How to check a monitor or TV for dead pixels and get rid of the problem

You will need a free app, a Q-tip, and a little patience.

How to remove dead pixels

Since black pixels are the result of damage to the transistor, they cannot be repaired without replacing these components. And this is almost unrealistic even in laboratory conditions. The situation is different with colored dots, which appear due to freezing subpixels. You can try to remove them.

What are dead pixels

In all LCDs, an image is formed from a grid of pixels. They consist of three separate subpixels of red, green and blue, which are responsible for the full color image formation. Each subpixel has a transistor that controls it on and off.

It looks like a broken pixel on the screen / overclock.Net

Even the matrix of a conventional HD monitor contains over 6 million subpixels, and in 4K displays their number reaches 37 million. With such a huge number, some of the transistors can malfunction. Then certain subpixels remain on or, conversely, off.

The topic is very relevant and in demand. Indeed, until now, hundreds of people having correctly chosen the diagonal and already going for the long-awaited purchase, do not know that they can get a big disappointment due to the fact that they did not immediately notice this moment.

Quite often, on forums on the Internet, you can see the outraged arguments of users that they were refused to return the TV, with broken pixels found already at home.

Perhaps someone will now say that there is a consumer protection law and the like. Yes, that’s all true. But the most interesting thing in this dispute is that people were denied absolutely on a legal basis.

In fact, everything is simple. See, according to the ISO 13406-2 standard, all displays are divided into four main classes, depending on the number of defects allowed. Here is a table for your reference:

In order to more specifically understand what these types of defects No. 1-2-3 are, you need to carefully study the screenshot below:

From this one can only conclude that only displays of the first class can be completely free of defects. But, as far as the author of the article understood, those are installed only on premium expensive TV models.

over, this is quite simple to do. And if you read this article to the end, you will find out what other parameters can and should be tested when buying your future pet.

So let’s move from words to deeds.

In order to determine the presence of dead pixels on the display, you need to first download special pictures to the USB flash drive. They are images of a uniform color: white, red, black, blue:

For example, this is how the defective area looks like in the picture with a black background:

Just don’t think that the author of the article has dead pixels on the TV. In this case, a special image was launched for clarity. # 128578;

Sometimes there are cases when the seller refuses to launch something from the buyers’ carriers, motivating this by the fact that there is a possibility of damage to the device. Like, you never know what you slip him there. And the administration prohibits.

Let’s see how this can be done on a Samsung Smart TV E-series. I think that by analogy, you can do the same on LCD panels from other manufacturers.

To do this, download any full-size (1920 x 1080) movie trailer, for example this one and play it. If the picture is not expanded to full screen, press the “P.Size” button on the remote control several times.

Then you need to press the “TOOLS” button and select the “Image Mode” item in the “Service” menu that opens:

Now click all the available modes: dynamic. The picture should be brighter, the movie. Paler image and so on. At the same time, the switching itself should pass clearly, without visible distortion.

The same can be done with sound. To do this, select the “Sound Mode” option:

Here, in the same way as in the case of the check, change the modes and make sure that at this time the sound does not disappear and there is no extraneous noise.

That’s all the wisdom, in principle. We have reviewed the main points. What else to say? Perhaps I missed the point about the so-called flashing of LED displays.

Highlights are white patches of light against a completely black background. In order to see them, you need to run the first picture from the image archive (black), with which we checked the TV for dead pixels at the beginning of the article:

In this case, the room should be dark and the TV should be allowed to run for 15-20 minutes before the start of the test. In other words, it should “warm up” slightly. The picture mode recommended for this test is “Cinema”.

On the other hand, there are currently no standards in terms of exposure. This is a side effect of LED technology, which is present in absolutely all manufacturers. So don’t worry too much about this.

We talked about this technology and all the nuances in detail here. About what to do if the device was brought from abroad, they wrote here. Read the links very carefully to understand the essence of the issue.

For dessert, I suggest watching a in which our Belarusian guy literally blew up the hall with his performance at one of the music shows. This is a very catchy and striking performance. Don’t believe me? See for yourself.