How to charge wireless headphones Xiaomi redmi

Technical specifications

Redmi AirDots 2 has characteristics almost like its predecessors. the first version, the improvements are all at the level of nuances we will compare versions after the table:

Model	TWSEJ061LS
Mi Redmi AirDots 2 headphones
Range	10 meters
Battery capacity	43 mAh
Charging duration	About 1.5 hours
Working time	Approximately 4 hours, 12 hours including case charge
Standby Time	About 150 hours
Battery type	Li-ion
Connectivity Technology	Bluetooth 5.0
Connection profiles	HFP/A2DP/HSP/AVRCP
Charging case
Charging current	500mA, 5V
Charging duration	About 2 hours
Battery capacity	300 mAh
Battery type	Li-ion

If we compare the headphones with their twin brothers, we see that there are very few differences, below is a comparison table Redmi AirDots vs Redmi AirDots 2 vs Redmi AirDots s, where we have indicated only the different parameters

AirDots	AirDots s	AirDots 2
Earpiece ABC capacity	40mAh	43 mAh	43 mAh
SBC codec bitrate	328 kbps	320 kbps	320 kbps
SBS HQ support	Yes	Yes	no
Total battery life	Up to 12 hours	Up to 12 hours	Up to 14 hours
Connection type	One headphone main	Both earphone equivalent	Both earphone equivalent

The size, design and materials of these headphones do not differ.

Noise reduction Redmi AirDots 2 only in conversation mode to hear you better, works by DSP.

MI True Wireless Earbuds basic || REVIEW || HOW TO CHARGE||

One Redmi AirDots earpiece is not working or not turning on?

First of all we have to find out what is wrong. There are three possibilities here:

• Redmi AirDots mismatch occurred for some reason. When searching for Bluetooth devices, your phone sees them both. And they only connect one at a time.
• One Xiaomi AirDots headphone does not work at all and does not respond to attempts to recharge it (once placed in its slot in the case, it does not flash any colors and when removed it does not have a white diode illuminated).
• The headset devices work separately, but both show “life signs” when placed in and removed from the charging case socket.

Software to see the battery status of the case is available to owners of the Pro version. The manufacturer used more expensive hardware and advanced power-saving protocol. The software allows you to monitor the power consumption of each element of the TWS-headset.

• After pairing the devices with a smartphone, information is displayed in the form of a pop-up window: data on the power of the box, left and right gadgets separately.
• The owner can see the % of charge remaining in the notification panel, as well as in the list of connected Bluetooth devices in the conversation mode, when listening to music.
• Application Mi AI. development of Xiaomi. The utility can be downloaded through GooglePlay or AppStore. Works only with this version of headphones. Displays the charge level of the case at startup.

What you need to know

For starters, there are 5 facts that are not directly related to the Redmi AirDots setup, but useful for the user’s information:

• The device comes with a charging case, which can recharge the headset several times (on its own full charge. up to 4 times);
• the headphones’ operating time from full charge to power off is about 4 hours (respectively, the maximum operating time when the case is fully charged is 12-16 hours);
• recharging time in a case. from 45 minutes;
• It is better not to bring the headphones to the power off because of the discharge, there is information that after such “shaking” they are unsynchronized;
• battery capacity (is in each “ear”). 40 mAh.

Managing

Tap once on the multi-function button to stop/start track playback or answer an incoming call. A double tap will call the voice assistant (Google Assistant, Siri, Alice), and when talking will turn off the microphone. If you want to cancel a call, hold the panel for a few seconds.

Unfortunately, Xiaomi Mi (Redmi) AirDots do not support remote volume control and music switching. This can only be done on the smartphone, or give a command to the “smart” assistant.

How to charge wireless headphones Xiaomi Redmi

Having bought Redmi AirDots you can find out that they do not show any signs of life and, most likely, completely discharged due to long-term inactivity. Unlike traditional, wired, headphones, these droplets require regular charging not only themselves, but also a special charging case that comes with. How to charge the AirDots headphones properly?

The first thing you need to do is to find the microUSB cable from some old cell phone and connect it to the case from the back.

After that connect the charger from your smartphone to the cable or plug it into a USB-port of the laptop, computer or any other device which gives 5V power.

If everything is connected correctly, the AirDots charging case will display this on its indicator on the front (glowing dim red).

As for the headphones themselves Redmi AidDots their LEDs also glow red during charging, and if fully charged white (briefly, when you put the headphones in the case).

It is possible to find out the charge of each of the Air Dots headphones by connecting them to a smartphone (the information will be displayed on the screen), but the case will not be able to see this way.

(1 goal., 5,00)

Each of the headphones has an LED on the control button cutout. Depending on the battery level, it may become red or white. It is clear that the red light indicates that it is time to recharge. Normally, the LED lights red when the battery has no more than 10% of its charge remaining. It is impossible to find out on the earmolds themselves how long the battery will be able to work. It is also impossible to check the degree of charge of the container. You can only find out the battery status from your smartphone. To be able to use the headset again, you must put it in a container and close the lid.

Placing the headphones in the charging case is easy. Each unit has its own cozy slot in the case. Therefore, you can not insert the AirDots incorrectly, they simply will not fit into the landing slot.

While the charging process is going on, the indicator lights on both the headphones and the charging case will turn red. As soon as the devices finish charging, the LED will change from red to white, and after one minute will go off altogether. For the device to be fully charged, you will need to keep it in the case for an hour and a half.

Synchronizing the Redmi AirDots with your smartphone will allow you to fully exploit the headphones. To do this, you need to follow the steps:

• Remove items from the case.
• Earpads turn on and sync with each other for 2-3 seconds. As soon as the light indicator became stable the headphones are ready to work.
• On your smartphone you start Bluetooth mode.
• Pairing occurs with the right earpiece. Mi True Wireless EBs Basic_R” appears in the device list. Communication with the left one will be set up automatically.

How to know if the AirDots case is charged?

Wishing to make the main features as good as possible, the manufacturer has spared on the material of the case, fitting into the narrow framework of the super-budget segment. haptically the plastic of the case reminds of Chinese handicrafts, and though outwardly it looks nice and without flaws, but something tells me that it is not worth waiting for its resistance to scratches. Charge indicator is placed on the front panel under the cover. It’s made in the form of glowing dots that indicate the amount of charge. How you know your AirDots are charged? Read our article below.

Unlike the older models sold for a corresponding price and have USB Type C, this device has a microUSB connector on the back, intended for charging the battery through the power cord. “Ears” in the seats sit tightly enough. they are held by powerful magnets, preventing accidental loss during shaking. The lid stroke is quite tight, and the closing closes with a firm click. This is also due to the built-in neodymium magnets which keep the halves firmly closed.

In the hand case looks like a sea pebble, but when you try to crush it, the cost is noticeable: you can feel the movement between the halves, sometimes accompanied by a slight creaking. On top, depending on which factory the gadget comes from, there is a logo. One version is a Redmi, the other is simply a Mi. The turned over pebble reveals its Chinese belly, studded with hieroglyphs with technical information. No charging cable is a plus plus, but that’s understandable: the port is standard, you can find a cable for it in every home. and the final price will only benefit from this.

How to know the charge of the Redmi AirDots case? This is impossible, but keep in mind that the case’s battery is capable of fully charging the headphones from 0% to 100% twice. Thus extending the total runtime to 12 hours (the runtime of the Redmi AirDots themselves is 4 hours). How to understand that the AirDots are charged? Easy, the red lights on the headphones will stop glowing.