How To Change Ttl On Iphone
Find out the value of the TTL of the computer
Before proceeding with editing, it is recommended to make sure that it is generally needed. Determining the TTL value can be done with one simple command that is entered into the Command Prompt. This process looks like this:
- Open Start, find and launch the classic Command Prompt app.
Type ping 127.0.1.1 and press Enter.
Wait for the completion of the network analysis and you will receive an answer on your question.
If the received number differs from the required one, it should be changed, which is done in just a few clicks.
Did this article help you?
How TTL is used and why change it
Let’s take a look at the simplest example of TTL action. A computer, laptop, smartphone, tablet and other equipment connecting over the Internet have their own TTL value. Mobile operators have learned to use this setting to restrict the connection of devices by distributing the Internet through an access point. Below in the screenshot you can see the usual path of the dispenser (smartphone) to the operator. Phones have TTL 64.
As soon as other devices are connected to the smartphone, their TTL decreases by 1, since this is a regularity of the technology in question. Such a decrease allows the operator’s protective system to react and block the connection, this is how the restriction on the distribution of mobile Internet works.
If you manually change the TTL of the device, taking into account the loss of one share (that is, you need to set 65), you can bypass this limitation and connect the equipment. Next, we will look at the procedure for editing this parameter on computers running the Windows 10 operating system.
Share the article on social networks:
Change TTL value in Windows 10
Information between devices and servers is transmitted by sending packets. Each such packet contains a certain amount of information sent at one time. Packets have a limited lifetime, so they can’t roam the network for eternity. Most often, the value is indicated in seconds, and after a specified interval, the information dies, and it does not matter whether it has reached the point or not. This time to live is called TTL (Time to Live). In addition, TTL is used for other purposes, so an ordinary user may need to change its value.
Changing TTL value in Windows 10
From the explanations above, you could understand that by changing the packet lifetime you make the computer invisible to the traffic blocker from the operator, or you can use it for other previously inaccessible tasks. It is only important to put the correct number so that everything works correctly. All changes are made by configuring the registry editor:
- Open the Run utility by holding down the Win R key combination. Enter the word regedit there and click on OK.
Go to the path HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Tcpip \ Parameters to get to the necessary directory.
Create the required parameter in the folder. If you are on a Windows 10 32-bit PC, you will need to manually create a string. Right-click an empty space, select New, and then DWORD (32-bit) Value. Select DWORD (64-bit) Option if Windows 10 64-bit is installed.
Name it DefaultTTL and double click to open properties.
Place a dot on the Decimal point to select this number system.
Assign the value 65 and click on OK.
After making all the changes, be sure to restart your PC for them to take effect.
Above, we talked about changing the TTL on a Windows 10 computer using the example of bypassing traffic blocking from a mobile network operator. However, this is not the only purpose for which this parameter is being changed. The rest of the editing is done in the same way, except that you need to enter a different number required for your task.
How to check TTL value via Ping
The TTL indicator (Time to live data packet lifetime in IP protocol) can be found by the Ping command in the system.
How to Ping from Windows
In order to execute the ping command in the Windows operating system and get a full response.
To do this, run the Windows built-in ping utility by pressing the WinR key combination on your keyboard or open Start. Execute. Next, in the window that opens, enter the command cmd.
Above, a list with available built-in Windows programs will appear.
By clicking on the program, you will open a command line window. Enter the command ping (space) IP (or the name of the server on the network)
Program for changing TTL value on Android
In order to manage TTL values on android devices, you need to install the TTLMaster program.
This application will allow you to change the length of the package in one click.
Why do you need Time to live
The maximum packet lifetime is one of the key values by which mobile communication companies monitor mobile devices and introduce restrictions (changing SIM cards from a smartphone to a modem or not allowing distribution over Wi-Fi).
How to change notification sound on iPhone
Reading time: 1 minute
The soundtrack of SMS can be changed on the smartphone itself and through iTunes, as well as in the social network VKontakte (VK).
In order to figure out how to change the notification sound on iPhone, you need to follow a series of steps:
Enter Settings.
Open Sounds and Vibration.
Select the type of notification to which you want to apply sound.
Enter Sounds Notifications.
Choose a suitable sound.
The following method is applicable to changing VK settings.
How to change the sound of a VKontakte notification on an iPhone
The VKontakte iPhone application only allows you to enable and disable notifications. You can change the notification sound on the iPhone VKontakte through the Jailbreak application. There are also other services like this that allow you to change the soundtrack. Unfortunately, they say that the use of such applications may lead to a deterioration in the functionality of the smartphone.
This is the only way how to change notification sound on iPhone VK. But this can also be done through one of the applications on iOS.
How to Change SMS Sound on iPhone Using iTunes
In addition to add-ons like Jailbreak, the sounds of incoming messages can be changed using the iTunes app.
- Load sound file.
- Add it to application library.
- If the composition is too long:
- Open file context menu.
- Select Details.
- Enter the Parameters tab.
- Set the start and end time of playback.
- Open context menu.
- Click Create version in AAC format.
- Open the context menu of the created file.
- Select Show in Finder or Show in Windows Explorer.
- Change file format from.M4a to.M4r.
- Add file to iTunes app.
- Transfer file to smartphone from computer.
- On iPhone, go to Settings.
- Enter Sounds.
- Select Message Sound.
- Select soundtrack file.
These are the three ways you can easily change the notification sound on your iPhone. You may also be interested to know, how to turn off notifications on iPhone.
How to speed up Wi-Fi on iPhone. Method 2
Apartment buildings have hundreds of identically configured Wi-Fi networks. They all broadcast on the same channel, which, of course, is heavily overloaded. Changing the default channel in the router settings to any other can significantly increase the speed of your wireless connection.
Please note that for different models of routers, the settings menus differ from each other. However, in most cases, the ability to change the Wi-Fi channel is available in the advanced connection settings.
How to speed up Wi-Fi on iPhone. Method 1
One of the most powerful ways to speed up Wi-Fi on iPhone and iPad is to use an alternative DNS server.
Step 1. Go to the Settings menu → Wi-Fi.
Step 2. Press i next to active Wi-Fi connection.
Step 3. In the DNS column, enter one of the fast DNS servers:
- Google 8.8.8.8; 8.8.4.4.
- Opendns 208.67.222.222; 208.67.220.220.
Step 4. Exit the Wi-Fi connection settings and evaluate the speed of the Internet.
How to speed up Wi-Fi on iPhone
Is your home Wi-Fi slower? Or do you want to learn how to speed up public wireless connections? In this tutorial, we answered both of these questions by talking about three ways to speed up Wi-Fi on iPhone and iPad.
How to speed up Wi-Fi on iPhone. Method 3
And public wireless networks. With Wi-Fi Assist, your iPhone and iPad will stay connected to the internet, even with a weak Wi-Fi signal. If, while browsing the Web, for example, in the Safari browser, the Wi-Fi signal deteriorates to such an extent that the page cannot be loaded, Wi-Fi Assistance will immediately, in fully automatic mode, start transferring data over the cellular network. Thus, a real disconnection of the Internet connection will not happen.
Wi-Fi Assist is activated in the Settings menu → Cellular. The Wi-Fi Help switch is located at the very bottom of the page. This feature is supported on all Apple mobile devices running iOS 9 and later, except for iPhone 4s, iPad 2, iPad 3 and iPad mini.
It is important to note that a large consumption of mobile connection traffic cannot occur due to using the Wi-Fi Assist function. Wi-Fi Assist does not launch when content is downloaded in the background and does not support particularly power hungry applications such as audio streaming and.
Share link
Rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram, VKontakte, Instagram, Facebook, Twitter, Viber, Zen, YouTube.
Bypass Yota restrictions on Internet distribution for iPhone / iPad Windows. This is a beta workaround, you need to check it out;).
Hello everyone, dear friends. I am so glad to be with you again # 128521;
But something we had at first problems, then everything became normal, and then the blue screen popped up again, in general, I am now thinking about all this.
In the meantime, I will show you, the owners of the apple, so to speak, a BETA method for bypassing the restriction (it is important that you check it yourself, suddenly everything will be stable for you), it consists of several links, namely:
1) Preparing the computer by changing ttl from 128 to 65 (we do this step according to the article bypassing iota restrictions for windows)
By the way, I pinged the phone with iOS on board (this is done with the ping command ip_address of the phone when the phone itself and the Windows computer are connected to the router, that is, to the same wi-fi network) and found that the iPhone, like Android, has the same standard ttl equal to 64! Unlike Windows Phone (Lumia) where the default ttl is 128.
2) Now we make the Modem Mode menu available in the settings on iOS.
To do this, in Settings, select Cellular:
Next, select the Cellular data network:
Further on the settings page Cellular data, register the APN access point internet.Yota and optionally set the user yota:
The final touch in the second step is to scroll down the Cellular data menu and in modem mode write the appropriate:
3) Finally, the third step is connecting it all.
We tried to connect iPhone 5S with iOS 8.1 on board to Windows 8.1 via Wi-Fi, but with such a connection, there is a high, even very high probability of a blue window with a restriction. This does not fit!
The solution was to connect the phone as a modem to a computer via a USB cable, this gave an acceptable effect, but it turned out to be not very stable, I think this is due to the iOS 8.1 version, so I recommend all of you, my dear apple-lovers friends, to check this method and unsubscribe in the comments about the results, THIS IS VERY IMPORTANT for analyzing this problem and finding a solution # 128521;
Is it possible to change TTL without root rights
Changing the TTL value without root rights is possible, but not on all multifunctional gadgets under Android OS. To change TTL on Android without root, just install Terminal Emulator for Android:
- Open the application and type cat / proc / sys / net / ipv4 / ip_default_ttl.
- If you have the correct version of the device, the base TTL value will open. Boost it by 1 and install on all devices that you would like to join the shared network.
- Reload all technique and check the result.
It should be noted that this method of changing the TTL value is quite rare, so if you are faced with traffic or Internet speed restrictions from the provider because of the TTL values, take care of obtaining root rights.
When is it worth changing TTL
Using the distribution of traffic from your smartphone or tablet, you may notice that some gadgets easily connect to your network, while in the case of others, you immediately receive messages from an operator providing mobile Internet services with warnings about speed limits or with new ones. Tariffs. The reason for these messages is the different TTL values of the sending and receiving gadgets. For example, you decided to distribute the Internet from a phone, where TTL = 64, to a laptop with TTL = 128. For many operators, these values are unacceptable, as a result, they either offer you suitable tariffs or block access to the Internet.
Faced with the above situation, you, of course, will be interested in the question of how to change the TTL to Android without root, because no one wants to pay for a new package when there are free gigabytes. In such situations, it is better to change the packet lifetime on the receiving device and continue to enjoy access to the Internet, but through a PC. You can also change this indicator on the distributing device, but in this case, you need to be careful, since changing the value later may cause access restrictions to devices that previously connected to your network without problems.
How to check for superuser rights
Changing the TTL value on Android devices often requires obtaining superuser rights. To find out if your device is rooted, it is best to use additional software that you can download from Google Play for free. The most popular applications that will quickly determine if you have superuser rights are Root Checker and Terminal Emulator.
The first program will not cause any difficulties in use, checking for the presence of root-rights in it is carried out intuitively. But the second, Terminal Emulator, requires entering the SU command in the terminal that opens, so you can easily determine the presence of superuser rights. If the result is positive, the terminal will return the values # or
Change TTL on Android without / with superuser rights
All multifunctional devices based on Android OS can be configured to distribute Internet traffic. This task is solved using just one additional program or by using the functionality of the gadget itself. It would seem that one tap on the screen and you share Internet access with your friends. But it’s not that simple. Mobile operators have found a way to control the customers sending traffic. And in this post you will learn what TTL is, why you need to change TTL on Android without root-rights, and how to replace indicators.
How to change TTL with root rights
The best way to replace the TTL value on the sending or receiving device is to use additional specialized applications. Noteworthy is the fact that all programs of this subspecies work exclusively on devices with access to the main administrator. Therefore, you will need to root the gadget in advance.
The most popular applications, through which changing TTL does not take much time, are TTL Master and ES Explorer. Next, you will learn how to use these simple programs to replace the value.
Changing TTL with TTL Master
The advantage of TTL Master is its simplicity. It is enough to perform a simple sequence of actions:
- Go to Google Play, find the application and install it on the gadget that needs to change the setting.
- After opening the program, you will see the current value of your TTL and an active column where you can change it. Feel free to change.
- Reboot your device. After that, you will notice that all speed limits and other nuances introduced by the operator have been removed.
