How to change the password on a Wi-Fi router. Is a password so necessary

Change the password on Wi-Fi routers TP-Link, ASUS, D-LINK, ZYXEL and Huawei

Wi-Fi router provides devices (smartphones, laptops, computers) connected to it with a local network and Internet. If after installing the router you have not installed a password on your Wi-Fi network, then the network is publicly available and anyone can connect to it in the radius of the network. Thus, your neighbors or employees of neighboring work offices can connect to your network and use it, which will lead to losses in the Internet speed.

If you already have a password, but someone recognized it, then you have no choice but to change the password for a Wi-Fi router to stop the free distribution of your Internet. In this article you will learn how to change the password for all popular Wi-Fi routers.

Password changing procedure on a router

As a rule, the setting of the router and its installation are carried out by people from the provider. However, after some time, the user can begin the following problems: 1. The data transfer speed begins to fall strongly. 2. Even at the time when no one in the house uses a wireless network, Wi-Fi network bulbs are still flashing. 3. If the provider takes a fee for the volume of transferred information in excess of the norm, constant debt in the account, which some associate with their inattentiveness for the first time.

All these cases indicate only one thing-someone unknown was able to connect to Wi-Fi by guessing or breaking through the password. If the password is installed, then there is no need to even guess.

The way out of this situation is to change the password to a more complex combination. At the same time, we note that it is quite difficult to hack a password from a Wi-Fi network. Therefore, the reason for the problems is the human factor-one of the friends, when you had at home, asked for a password to connect his device, and then told others about it (it is worth remembering that all devices save passwords from Wi-Fi networks). How to change the password on a router and how to make a network more protected?

When considering a password to change the Wi-Fi, for example, the provider should understand that providers do not conduct the production of network routers, but only conclude an agreement for their customers with various manufacturers. You can install a new password on all network routers, however, the change process depends on the characteristics of the router itself.

Provider provides his services with the installation of the following network routers: 1. D-Link. 2. TP-Link. 3. Huawei. We will also consider the process of changing passwords of routers of other manufacturers.

Installation of a new password on Wi-Fi Network

To change the password for access to the Wi-Fi network, you need to do the following:

• go to the Wi-Fi Router settings (if you can’t enter, you may have to reset the device settings);
• Next, open the tab/section for tuning a wireless network (as called as “Wireless” or “Wi-Fi”);
• In this tab, select a security certificate. Type of encryption. and password for access to the network.

In general, everything is quite simple. Before moving on to specific models of routers and setting them up, I will dwell on several important parameters (voiced above).

Certificate of safety

The most popular security certificates that are in almost every router are: WEP, WPA-PSK and WPA2-PSK. To date, the best security is provided by the WPA2-PSK certificate, it is it that I recommend choosing.

If devices that do not support WPA2-PSK are connected to the Wi-Fi network, then stop at the WPA-PSK version (some routers have a mixed WPA/WPA2-MIXED mode).

By the way, some budget models of routers may not work stably and break off with the selected WPA2-PSK. In this case, try limiting the speed of work in the router, as well as change the security certificate.

Closely related to a security certificate. If you choose WPA, TKIP key integrity protocol is used, when using WPA2, the secure standard AES.

It is from this that I recommend that you start. If you select the settings that are different from this, there may be problems with connecting devices to your network.

Here, perhaps, I will say only the most basic thing I think about his choice. I noticed that many users put very simple passwords, the species: “11111111”, “2222222”, “11111122222”, etc.D. Such passwords are very quickly selected and hacked!

It is unlikely that, of course, someone will purposefully and for a long time select the password for your home Wi-Fi network (especially since the vast majority of them have no valuable data). Nevertheless, I will give a couple of tips on what the password should be:

• at least 8 characters;
• It is advisable to use the letters (Latin) and the numbers (of course, some will also say special. Symbols. But in my opinion it is not worth it, then it is too dreary to dial them on the phone or tablet when connecting to the network);
• Do not use your names, standard words (Password, Admin, Computer, etc.). The most famous dates, etc.

Now let’s move on to specific models of routers. So.

To help!

You may come in handy for an article on how to enter the router settings.

D-Link

One of the most popular brands of routers in our country. There are a fairly large number of models, but firmware that differs from each other (in the root)-not so many, 3-4 pcs. In this article I will give several of their variations, and first several important parameters.

IP address (default) for entering the settings: http: // 192.168.0.one

(preferably using the Internet Explorer browser)

Login (by default): admin

Password (by default): either an empty line, or also admin.

In old models of routers (such as DIR-300, DIR-320, DIR-615, DIR-651). As a rule, the firmware has not been translated into Russian and presented in such an orange-gray design. To change the password, you must go into the router settings (if you do not come in, then see. this is). And open the section “Setup/Wireless Setup”.

At the bottom of the window in the column Network Key, enter your password (see. Screenshot below), by the same, the same security certificate and the type of encryption are set there. After entered settings, save them. Save Settings button.

DIR-300. Password installation / setup / wireless setup

By the way, there is a similar firmware in Russian translation, tunes in the same way.

For models of DIR-300 NRU and DIR-320 NRU (firmware version 1.2) The settings page look a little different: a pleasant white background, on the left side all the main sections of the settings are presented. Open “Wi-Fi/safety settings”. and install:

Do not forget to save the settings by clicking on the “Change” button.

D-Link Dir-620/DIR-320 NRU in version 1 firmware has.3 and 1.4 The Inte Wee is somewhat different: when you go to the main screen, you see a gray background and tiles (as in Windows 8) on which the main sections of the settings are displayed.

To change the password, it is necessary to open the section “Wi-Fi/Safety Settings” (number 1 on the screenshot below), and then enter:

Router from (Sagemcom)

In general, with routers, as a rule, there are no big problems. everything works as it should be. And when connecting the Internet, you will be put a password and everything will be tuned. The firmware in the routers is completely in Russian, so there are usually no questions about it about it.

Settings entry parameters

Address: http: // 192.168.one.one/

Password and Login (by default): admin

The browser is suitable for almost any: Opera, Firefox, IE, Chrome, etc.

To set the password, open the “Settlement of Wlan/Security” section. Next, in the subsection “Manual Setting of the Access point”, select:

• Authentication. WPA2-PSK;
• WPA/Wapi password. indicate your password;
• WPA/Wapi encryption. AES;
• Next, click the “Apply/Save” button (screenshot is given below).

Sagemcom Fast 2804. Roter from Rostelecom

TP-Link

One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and do very well with the “realities” (they work with almost all Internet providers).

Parameters for entering

IP address: 192.168.one.1 (in rare cases 192.168.0.one. depending on the firmware version);

User name: admin;

Password: admin (type without points, commas, etc.).

Most often you have to deal with the so.called “green” firmware. It is found in routers: TP-Link TL-WR740XX, TL-WR741XX, TL-WR841XX, TL-WR1043ND (45ND) and others. About 50/50 firmware is in English/Russian.

The English version is presented on the screen: to change the password, you need to open the “Wireless/Wireless Security” section. Then select WPA/WPA2.Personal and put:

To save the entered settings, click the “Save” button in the bottom of the window in the center.

Almost identical actions will need to be done in the Russian version of the “green” firmware: Open the “Protection of the Wireless Regime” section. Then set the PSK password (see. number 3 on the screen below).

TP-LINK “Green” firmware (Russian version)

You can also often find a “blue” version of the firmware in TP-Link (for example, TP-Link WR340G, TP-Link WR340GV, etc. Similar models).

• First, open the “Wireless Settings” section;
• In the Security Type column, we install WPA-PSK/WPA2-PSK;
• Security Option. We put Automatic;
• Encryption. Install automatic;
• PSK Passphrase. This is the password (somewhat excellent spelling than in other. Firmware versions). It must then be specified when wirelessly connecting to the router.

After the settings made, save them (the Save button on the screen is higher, see. number 3).

Trendnet

The access parameters are relevant provided that the router has factory settings, and its IP did not change.

IP address for entering the settings: http: // 192.168.ten.one

User name (login): admin

Password (password for access): admin

In general, Trendnet routers most often have 2 versions of the firmware: blue and gray (both in Russian and English).

To configure safety and set the password in the “blue” firmware, for example, the Trendnet TeW-432 BRP router, you need to do the following:

• Open the Wireless/Security section;
• In the Authentication Type field, select WPA;
• In the PSK/EAP field, select PSK;
• In the Cipher Type field, select Auto;
• In the Passphrase and Confirmed Passphrase field, enter the password and click Apply (screen below).

Trendnet TeW-432BRP / Security / Safety Safety Wi-Fi Network

In the “gray” version of the firmware (for example, as in the Trendnet Tew-651br router), actions are performed in the same way, even the menu elements are located in the same places.

Useful recommendations

Finally, it is worth considering useful tips for how to correctly construct a Wi-Fi Roter:

• You can not put standard combinations Q12345, QWERTY, 12345, 09876 and others.
• You should not put the date of birth, elementary words, symbols on the keyboard that go in a row.
• To strengthen the password, you can use special characters (!;%:?).
• It is recommended to use letters that have a different register.
• You should choose a latin, combine numbers with letters.

Only in the case of setting the correct password on the modem, the protection of personal data of the user will be provided and the connection of the user and the operator will be simplified.

How to protect the router from changing parameters

After installing a reliable password on the router, the user does not receive 100% protection against hacking the device. To avoid unauthorized access to Wi-Fi, the owner of the network needs to be able to:

• periodically update the router firmware independently;
• turn off the WPS function;
• block remote router access;
• Change the set password.

He should also learn to include filtering on the MAC address of the router. You can prohibit connecting a device with a specific address in the settings. If there is no address in the list, then there will be no connection either.

Password requirements

To reliably protect the router from criminal attacks, you need to come up with a new password. To ensure a sufficient level of reliability, it is necessary to use not only numbers, but also letters. over, in a different register. The length of the key should not be less than 6-8 characters. In this case, the level of protection is much higher. If the characteristics of the selected router allow, then special characters should be additionally used: #. or ^. This will further increase the degree of protection of the device.

Not only the quantity deserves attention, but also the password. Simple memorable options should be immediately abandoned. A standard sequence like “123456” can be easily hacked by attackers. You should also not use the dates significant for the family, nicknames of pets, as well as any other combinations that are easy to determine by receiving minimal information about the family.

Password change procedure

To change the password on a specific router model, you must carefully read the instructions. This will greatly simplify the process, since manufacturers very often recommended sequence of actions accompany detailed illustrations. If there is no instruction for some reason, then you can adhere to a common algorithm. To access the router settings, you need to connect to the network.

When changing the access key using the phone, the wireless method is used. If there is no device already connected to the network, then we act in the following sequence:

Having gained access to the network, they start directly to change the settings.

Change of settings

Having gained access to the network, we go to the router settings. For this purpose, the following actions are required:

• Any browser is loaded.
• A new page opens.
• The data indicated on the route itself below is entered into the address line. Thanks to them, it is possible to access the control panel. As a rule, this is “192.168.one.one.””. Modern models most often indicate the address of the resource through which identification data can be made.
• A login and password are introduced into the window that appears. If the data change was not made before, then you can find them on the label under the address of the resource. Most often, the phrase “admin” is the standard login and password.
• If the data on identification data is adopted by the system, then the router control panel is displayed. It includes all the settings associated with the operation of the device. There is also a point regarding the direct password shift.

Once in the settings of the router, you should know how to change the password for a particular model of a Wi-Fi-Rooter. The procedure may differ slightly depending on the manufacturer and the year of release of the device.

Installation of a new password on tp-link

TP-LINK has two instructions depending on the integrated control intended control panel.

In the first case, a password is necessary to change:

• Go to the section “Network” or “Wireless”. The information relevant for this network is displayed on the screen. Its name and valid password will be indicated.
• Enter a new key and save the entered data.

If such an algorithm of action does not allow solving the problem, you should act according to the second algorithm:

• We open the section “Wireless”.
• We go to the “Wireless Security” subsection located on the left side of the window.
• We are looking for the line “PSK Password”. It contains all current identification data.
• We wash the current password. We introduce a new one. Save the changes by the “Save” button.

Installation of a new password on Xiaomi

• Transition to the “Settings” or “Settings” section located in the upper part of the screen.
• Here you just need to choose the subsection “Wi-Fi Settings”. In the English version of Xiaomi-“Wi-Fi Settings”.
• After that, the current current is erased, and the new one fits in the corresponding line. All changes made are necessarily preserved.

Installation of a new password on ASUS

If the router is released by ASUS, then the key change is performed in the following sequence:

• We go to the section “Wireless Network” located on the left side of the “Additional Settings” window.
• Find the item “Preliminary key WPA”.
• Enter new data, entering the security key in the corresponding line.
• We save the changes made by the “apply” button.

Installation of a new password on d-Link

The algorithm of actions may vary depending on the model of the router and the settings panel used. You can act as follows:

• We get acquainted with the subparagraphs located on the left side of the menu, select “Wi-Fi“.
• Choosing the subparagraph “Safety Settings”.
• We indicate the parameter in the line “network authentication”-“WPA2-PSK”.
• We move to the line “PSK encryption key” and enter the password that you need.
• We save new data by clicking on “apply”.

If the router of the router in English, then you can press the same buttons, since the location of the points does not change depending on the language.

After changing identification data, information should be updated to enter the network on previously connected devices. In order not to forget the information entered, it is worth writing it somewhere.

We change the ADMIN password on zyxel routers

On the roots of Zyxel, everything is about the same. You need to get into the settings first. In the settings, go from the bottom to the System tab, select the users tab on top, and click on admin.

A window will appear in which you need to specify the password, and press the Save button.

That’s all, the standard password will be changed to the installed.

99

514893

Sergey

Tips for setting up routers (general)

After changing the password of the router, no device can connect. And rebooted the router and removed from the list in the laptop. But he doesn’t want to connect

Why does not connect? What mistake?! You only changed the password? Go to the settings again and check everything. Install another password and you can still change the name Wi-Fi network.

Good day! How to change the password, it is clear. But how to change the login is a question

On which router? On many devices, login cannot be changed, only password. If there is the possibility of changing the login, then the corresponding fields are in the same place where you change the password.

On the ASUS AC66U router. The provider changed the login, only I did not see how. Now I want to change, but I do not see the opportunity. I thought to do it on my own, without a call to the provider.

And where is the provider? What login do you write about? Maybe I misunderstood you.

Where the password changes, there is no such opportunity, like

The router is new. I went to the provider, the office, configure the new router. Changing the password and login, it was my wish.

Login- at the entrance to the settings of the router. Login and Password from the manufacturer ASUS-Admin, Admin.

In the Department of Administration, the System tab.

I was there, and now I am there. But, there is no way to change the login

Although, in your photo, I see that there is such an opportunity.

And perhaps it only seems that you have in the photo, it is possible to change the user name for a router (login)

I’m sorry, I have ASUS RTN12 at work now. And on it I do not observe the possibility of changing the login that you have in the photo. And the ASUS AC66U model is at my house. In the evening I will check this opportunity. Apparently, on some models of this manufacturer, there is no way to change the login, and some are. As you wrote above)). thank you very much for the information.

Honestly, I have not seen a single ASUS router (including RT-N12), where the name of the administrator user could not be changed.

Good day, Sergey! Indeed, the ASUS AC66U router is given the ability to change the login when entering the settings. But on RT-N12- no. I solved my question, everything is simple. Thank you.

Now the question is, whether the Internet signal will be transmitted through the router if the incoming Internet cable is first connected to the computer system unit, and then connect the system unit with a router, an Internet cable? Connect the cable to the input to the router.

Some strange scheme is obtained. It is necessary that there are two network cards in the computer. To connect the Internet into one, and from the other to throw the cable to the router. You can try to configure the bridge between the connections. But why? Perhaps, of course, I misunderstood you.

This is to check the speed of the Internet. I purchased a new router to improve the wireless work of the Internet. Before that stood RT-N 12. Speed ​​from the provider up to 100 Mbit. RT-N 12 issues a wireless of 30-60 Mbit. No more. First bought a microtics 961. The store advised him as the most nimble and serious apparatus. At first he worked well, speed is 70-90 Mbit. After 2 weeks, after turning on the device, after 2-3 hours of stable operation, the speed began to drop to 10 Mbps. It turned out that the firmware is old. Updated. Worked for a while normally. Then again the speed dropped to 8-2 Mbit. After rebooting, the speed is excellent, after 2-3 hours, it takes off again down.

As a result, I handed it back to the store. I took ASUS AS66U. (I wanted to take it at the very beginning, since I always used the routers of this company). The first disadvantage of this apparatus, after turning on, is activated after 1.5-2 minutes! The rest worked normally (70-90 Mbps). About a month later, I notice, in the evenings (after work returning), the speed rises to 20-40 Mbit. After rebooting, the speed is restored to the norm. I thought, maybe the provider in the evenings reduces speed.

I threw the Internet cable to the system from the computer. Internet speed up to 94 Mbps. Super. I throw it back into the router, the speed of the wirelessness, also, super. I consider this to be rebooting the router (I pulled out the Internet from the router, and put it back). Checked this scheme for a couple of days. All the same. Now the essence of the issue. Maybe the speed from the provider in the PC also increases after I insert the cable into the system of input Internet system? Therefore, I think to leave the input Internet in the system for a couple of days and check the speed on PC by direct. But, at the same time, you need an Internet from a router so that at home they can use an Internet through phones. That’s why the question arose.

In the system unit from the computer, there are two nests for patch cord.

1-2 minutes to load a router-this is normal.

Connect the Internet to the router through a computer to check the speed is somehow stupid. If you want, you can try. In the “Network Connections” window, holding CTRL, select the Internet connection and connection to the router and by pressing the right mouse button set up the bridge between these adapters.

From your description, I did not understand one thing-what at the speed when connecting to the router through the cable, and not by Wi-Fi?

Individual settings of devices of different manufacturers

There are many types of routers, depending on the company, methods of entering the account and password changing may change.

D-Link

Link manufacturers are one of the most popular service providers when it comes to the router. They are used by more than 40% of users on the territory of the browser line of the search, an address is entered, which in the case of D-Link looks like this: 192.168.one.1 or 192.168.0.one. Password and login for all types of Link Routers single. admin. In the menu that opens, select the section “Expanded Settings”, Wi-Fi, “Safety Settings”. If for greater safety it is required to change the encryption data of the device itself, then you need to go to the “System” and “Password of the Administrator”.

TP-Link

For almost all models of such routers, the access path will be 192.168.0.one. After entering it into the browser line and the entrance to the account (standard password TP-Link: Admin, it can be found on the rear cover of the device), in the Wireless tab you can enter a new password for the TP-Link router. After that, be sure to reload the device in the System Tools department, there is a Reboot button there, by which you need to click.

Huawei

Standard address for entering the router account: 192.168.101. Login and password most often: Root and Admin, however, there are others (Telecomadmin and Admintelecom). Better to look at the sticker on the device. In your personal account you need to open the Wlan tab, in the Authentication Mode field, select WPA2, and enter the desired password into the WPA PRESHAREDKEY line.

Access to the router menu through 192.168.one.1, standard login and password: admin. You need to find the “Wireless Network”. “authentication test” tab ”. There, a new access code fits in the WPA2-Personal field.

Zyxel

To enter the settings menu, the standard path of 192 is introduced for this router.168.one.one. Login and password usually admin. To change the access key from the wireless network, the “Wi-Fi network” item is selected, then “Security”. It is necessary to check the type of security if it is not worth “WPA2-PSK”, you need to choose it.

Tenda

Link for the search line in the browser: 192.168.0.one. In the menu you need to find “Wireless Settings”. “Security”. There, a new key is entered in the WPA2-PSK field and click on OK to preserve the results.

Link for access to the ZTE router account: 192.168.one.one. Login and password, respectively, Admin and Password. In the menu that opens, you need to select “Wlan-Multi-SSID setting”. Next, click on Name-Submit-Security. Safety type should be “WPA2-Personal”. After entering a new key, click on OK.

Rostelecom and other providers

For the router, almost the same actions are performed as for the rest. To enter the admin panel in the browser, you need to enter the path indicated on the device in the back (most often for this provider: 192.168.one.one).

In order to change the code from the Wi-Fi network, you need to go to the “Wi-Fi settings” item. When it is required to change the login or the key to the account, you should click on the “General settings of the router”. Further, it is intuitive to which field, what to introduce. It is important to check and install the type of safety WPA2.

In general, for all manufacturers and models there are approximately the same data change scheme. The address for going to the admin panel is best to look at the device in order to immediately get into the right menu, and not select various options. The process of changing passwords is fast and simple, but very important, as it is able to protect important data from criminals.

TP-Link

To change the encryption key on the TP-Link routers, you must log in to the web-integer through the browser. For this:

• Connect the device to the computer using a cable or connect to the current Wi-Fi network.
• Open the browser and enter the router in the address line IP. It is indicated on the rear panel of the device. Or use default data.They can be found in the instructions or on the official website of the manufacturer.
• Confirm the entrance and specify the login, password. They can be found in the same place as the IP address. By default it is admin and admin. After that, click OK.

After that, reboot the Wi-Fi router so that the changes come into force. You can do this through a web-integer or mechanically, clicking on the corresponding button on the very box of the receiver.

Asus

Connect the device to the computer using a special cable or connect to Wi-Fi from the laptop. To change the access key from the wireless network, follow the following actions:

• Go to the route of the router. To do this, open the browser and enter the IP device in an empty line. It is indicated on the rear panel or in the documentation.
• An additional authorization window will appear. Enter here login and password. If they have not changed before, then use the default data (they are in the documentation and on the device itself).

Wait for the device to reboot and these connections are updated. After that, you can connect to Wi-Fi with new parameters.

What to do before changing the password to Wi-Fi?

Due to the fact that the Wi-Fi signal covers tens of meters, it is required to protect the connection by creating a password for the connection. The signal penetrates through the walls, and other people will connect to the router and through it to a wireless network from another room or street. Loss of part of the Internet connection speed is the smaller of the problems. Solving the problem is simple-install a reliable password on Wi-Fi. When connecting, just enter the network security key, which is saved by pressing one button.

Before changing the access key to Wi-Fi, you should think about the safety of a wireless connection. The rules are simple:

Which password to use

Before changing the password, Wi-Fi should determine which password to use. In terms of security, it should consist of at least 8 characters, contain the letters of the upper and lower register, signs and numbers. However, this should be done only if the connection is important for hacking. Otherwise, an ordinary combination of 8 characters, difficult to guess (do not introduce facts known to people, such a birthday or a simple sequence of numbers, enter a complex combination). In addition, in modern routers it is easy to configure protection against selection of access key.

• At least consists of 8 characters;
• Security key from title and capital letters, signs, characters and numbers. For example: 1 No.LD3#F
• Not a date of birth, a simple password type 12345678, surname, name of the pet.

If it is difficult to come up with a safe password, use the program to generate combinations, this will help create a powerful network key to select. Or write out the sequence of numbers from your favorite book. The access key should be recorded and preserved.

Let’s move on to the settings changing the password of the wireless network.

Roter Administration

To enter the router settings, open the browser, in the address bar, write the address of the administrator panel. As a rule, this is 192.168.0.1, 192.168.one.1, 192.168.ten.1 (mainly for Upvel routers), 192.168.eight.1 (Huawei) or 192.168.100.one. For TP-Link routers, you can use not IP, but URL address TPLINKWIFI.Net and http: // tplinkwifi.Net. The address is indicated in the guide to the router and on the sticker on the back). If you turn on the router for the first time, then you will find a login with a password to enter the administration page. Do not despair, if the instructions were thrown away, the sticker was erased, and this page on the Internet is the last one that the phone connected to Wi-Fi was staged.

Search for the address for entering the router through the command line

Find out the address using the command line in Windows. At the same time, press the Winr keys, type CMD in the window opened, click Enter. The command line window opens, print the ipconfig and click Enter. In the Ethernet section Last IP (main gateway). access to the router settings. In the picture, this is the address 192.168.0.one

If the login and | or the password has already been changed, then enter a new pair of “login”. “password” for access. If the new login and password are forgotten, return to the factory settings of the router, press and hold the Reset button. Remember, the settings for connecting to the Internet will also be dropped, enter the settings again after changing the security key, first write down!

Some routers are supplied with the program for working with equipment. In this case, it is better to use a program than an integration in a browser.

The process of changing access to the Wi-Fi network is monotonous in models and manufacturers, let’s look at the particular frequent devices. Remember, passwords of two.band routers with a working frequency of 2.4 GHz and 5 GHz are configured separately. Repeat the process for each Wi-Fi range.

Change Wi-Fi Password on D-Link router

After authorization (the process is indicated in the previous paragraph) in the browser at 192.168.0.1 using the current login and password. Go to the “Wi-Fi” menu item-“safety settings”. The integer differs depending on the firmware used by the router.

How to change the Wi-Fi network password in this window? In the line “Network Authentification” select WPA2-PSK. Enter the password in the field of the PSK encryption key. Save password change.

How to change the Wi-Fi password TP-Link router

The difference between authorization and D-Link routers in the address, use not only 192.168.0.1, but also 192.168.one.1, tplinkwifi.Net. By default, the pair “Login”. “Password”: “admin”. “admin” (without quotes). The window intenses also differs depending on the firmware of the router, go along the “wireless network safety. WPA/WPA2. Personal (Recommoded)” path. Indicate the new password in the PSK Password field. Save the changes. If the modem asks for a reboot, agree. After rebooting, the password will enter into force.

Zyxel

Type in the browser address 192.168.one.1, log in using the current pair of login. password. If the password has not changed, look at the “login”. “password” on the sticker on the back of the router and in the instructions for use. Having entered the settings, go to the Network menu. In the Wireless Lan tab, select WPA-PSK, install a new password in the Security Mode, Pre-Shared Key field.

Huawei

In the browser, go to the address 192.168.one.1, log in, indicating the current login and password (by default admin. admin). Go to the Basic tab, the Wireless Lan menu item. Indicate the name of the wireless network in the SSID field. Select the type of authentication and encryption, enter a new meaning. Save the changes.

Other routers, for example: Netgear, Belkin, Linksys, Trendnet, Apple Airport, describe separately, the mechanism is similar. Providers also use their own firmware, such as “Interzet (house.RU). The setting mechanism does not differ.

How to put a password on Wi-Fi on a TP-Link router

You can do this in the control panel itself the router itself. First, we need to go into the settings. To do this, we connect to the router via Wi-Fi, or using a network cable, open any browser and type 192 address.168.one.one. On some models, settings may open to address 192.168.0.one. See this information on the router itself, on the sticker. Or see the instructions: how to go to the TP-Link router settings?

A user name and password’s request should appear. By default. Admin and Admin. Perhaps you have already changed them, so indicate your. If changed and forgot (standard ones are not suitable). then you have to reset the settings.

Next, in the settings, install the password on the Wi-Fi network. We do this:

• Open the Wireless tab (wireless mode). Wireless Security (wireless protection).
• Select a WPA/WPA2 item. Personal (Recommoded).
• At Version and Encryption (encryption), I advise you to leave Automatic so that later there are no problems with connecting to Wi-Fi.
• And in the Password field (PSK password), indicate the password that you will use when connecting to your Wi-Fi. The password should be at least 8 characters, and preferably complex. Try not to forget the password, but better, write it down. If you forget, you can try to remember the password.
• Press the Save button (save) to save settings.
• Everything, we put the password on Wi-Fi! Now our TP-Link router is protected.

Then, click on the link “Click Here” (click here) for rebooting the router. Or reboot in the “System Tools” section. “Reboot”.

If you just wanted to change the password for TP-Link, then we do everything in the same way, only remove the old password, set the new one and save the settings. After rebooting, you need to connect to your network, indicating a new password that we just installed.

How to change the password on the TP-Link router (new control panel)

If you have a new TP-Link router with an updated web interest, which in blue tones, then the entrance to the settings and changing the Wi-Fi password will be slightly different. We go to the settings at TPLINKWIFI.Net, or 192.168.0.one.

You can change the password on the Basic Settings tab (BASIC). “Wireless).

Please note if you have a two-band router that distributes two Wi-Fi networks at frequency 2.4 GHz and 5 GHz, then the password must be installed for both networks. It can be the same, or different. It doesn’t matter how it is more convenient for you.

Wi-Fi devices to TP-Link do not connect after password change

A very popular problem. After you changed, or installed a new password of the wireless network, your devices (computers, laptops, phones, tablets, TVs, and t. D.) may simply not connect to Wi-Fi. A very popular mistake usually appears on the computer: “The network parameters stored on this computer do not meet the requirements of this network.”.

As a rule, this small problem is being solved with a simple removal of the Wi-Fi network and repeated connection, already with the new password. Deleting a network is not difficult. On a mobile device, just press the network itself and just hold it, and then select “Delete the Network”. About how to do this on a computer, I wrote in the article: We delete Wi-Fi network on Windows 7, and a separate instruction for Windows 10. There this function is called “forget the network”.

After these simple actions, everything should earn. If anything, ask in the Комментарии и мнения владельцев.

124

864860