How to boot a laptop into Safe Mode

10.11.2021 derrick_rogers Article

How to start your computer in Windows 7 Safe Mode?

Windows 7 Safe Mode. Boot on Startup

Immediately upon turning on the PC, press the F8 key several times, if the moment was missed, the standard OS will start loading, so the procedure will need to be repeated. If everything is done correctly, then on the computer screen you will see the following information:. safe mode.

How to start Windows 10 Safe Mode when starting Acer?

When shutting down the computer, hold down SHIFT while clicking the Shutdown button. Or press ESC, Delete, F8, or F12 when turning on the computer. Depending on the BIOS manufacturer, one of these combinations will start Windows in Safe Mode.

How to start Windows 10 in Safe Mode?

To do this, simultaneously press the [Windows] and [X] buttons, a context menu will open in the bottom left. Here, run Command Prompt as Administrator and then confirm the security prompt. Enter the command “bcdedit / set safeboot network”, Windows will start in safe mode.

How to enter Safe Mode on a laptop?

Press the F4 key to enable Safe Mode.
Press F5 to enable Safe Mode loading network drivers.
Press F6 to enable Command Prompt Safe Mode.

How to start Windows 10 in Safe Mode

How to start Windows 10 in Safe Mode via BIOS?

[Laptop] Windows 10. How to enter Safe Mode if the system does not boot and reset the system parameters?

Click [ Options].
Select [Download Options].
Click [Restart].
Select item 4 (press F4 on your keyboard) to enter Safe Mode.

How to enter Windows 10 Safe Mode if there is a black screen?

To boot Windows in Safe Mode:

Press the Win R keyboard shortcut (Win is the Windows logo key) to bring up the Run window.
Enter msconfig in the box and click OK.
Open the Boot tab and in the Boot Options section, check the box next to Safe Mode.

How to enter Safe Mode on an Acer laptop?

Open the found utility. The “System Configuration” window will appear on the monitor, in which you need to go to the “Download” tab. At the bottom of the window, you need to check the box next to the “Safe Mode” line, save all changes, and then restart the laptop.

How to enter Safe Mode on a Lenovo laptop?

Select Troubleshoot Advanced Options Startup Options Restart. After restarting the computer, a list of options will be displayed. Select 4 or F4 or Fn F4 (following the instructions on the screen) to start the computer in Safe Mode.

First way to start laptop in safe mode on Windows 7

To download, go, open, call, install, get, translate, select, restart or switch to safe mode, click the restart option and immediately after turning on (there is no Windows logo yet) click the f8 button.

In rare cases, you may need to press another key: from f1 to f12. Then you have to experiment or go straight to the second method.

Start Windows in Safe Mode: Method Two

You can start safe mode in Windows (I am writing about Windows 7) through the “control panel” by clicking “administration” by clicking on “system configuration” and moving to the boot tab, and that just put a checkmark in the appropriate place (see the picture below).

You can do it differently by using the “msconfig” utility. Paste it into your laptop search (without quotes). It will appear at the very top. click once, and then do as described above.

Vsesam

Sometimes you need to start a laptop in safe mode on Windows 7, Windows 8, Vista or XP. The differences are only in the eight, the rest are almost the same.

To enable Safe Mode on Samsung (Samsung), Asus (Asus), acer, HP, Sony xperia, lenovo, Sony vaio, MSI or Packard bell laptops, you can use one of the three methods below.

Why three? Anything can happen. suddenly one does not work. try the second. In general, safe mode is the same as usual, only some services / programs on the laptop do not work.

I turn on Safe Mode on my laptop mainly to disable (uninstall) antivirus applications and non-uninstall programs.

How to Boot into Safe Mode On Windows 10 (3 Ways)

NOTE: if you do not start Windows 10 or 7 Safe Mode, you can find the solution here.

The third way to enable safe mode on a laptop on win 7

This method is for the lazy. just force the laptop to quit. For example: remove the battery and disconnect the mains.

It could be easier. Press and hold for a few seconds (until everything turns off) the shutdown button.

Then just turn on and you will see a menu for 30 seconds in which you can select various ways to start the laptop. the very first one on the list is the one you need.

That’s all, I think one of the three options will definitely suit you. Successful problem solving.

Diagnostic tools

So, the first way is to activate the buffer format (only suitable if the OS is working properly). To do this, do the following:

Press the “Options” button (located on the side panel), select the “Shutdown” item, then hold down Shift and select “Restart”. This will launch a diagnostic screen.
In the new window, select: Diagnostics. Add. Options. Boot Options. Reload.
Next, the system will ask you to select the desired download method. The standard option (4th point) is suitable here, so press F4.

The PC will start in Safe Mode, and you can carry out the necessary manipulations.

What is Safe Mode on a laptop

Safe Mode is a system diagnostic mode that allows you to run Windows with only the software and drivers you need. If there are problems in the operating system, starting in safe mode makes it possible to continue working and fix the problem.

In this case, the installation of the software is impossible. The interface of the Windows working window also differs from the standard one, since it uses a low screen resolution. At the corners of the monitor it says “Safe Mode”.

Special boot options for Windows 10

If Windows starts, then you need to do the following:

Click on the notification icon and select the items: All options. Update and security. Recovery. Restart (if you do not have this button, then use one of the other methods).
Next, select the items: Diagnostics. Add. Options. Boot Options. Reload.
The boot mode selection screen will appear, where you indicate the method that suits you by pressing F4, F5 or F6 (it is recommended to choose the 4th or 5th option).

How to start Safe Mode in Windows 10, 8, 7 and XP?

Safe Mode (English. Safe Mode) is a diagnostic mode in which all unnecessary drivers and Windows functions are disabled. It is used to troubleshoot PC problems. You just need to run safe mode and eliminate errors, after which the PC will work as it should again.

When might you need to enter Safe Mode? For example, to solve the problem when the monitor turns on for 2 seconds and turns off.

Also, in this way, you can remove viruses, reset your password, fix errors (including the blue screen of death), restore the system, etc.

There are several ways. Plus, they differ slightly depending on which operating system you have. Therefore, below we will consider all the available methods on how to enter Windows Safe Mode.

Boot from disk or USB stick

And another simple option for starting Safe Mode in Windows 8 is through a bootable USB flash drive or DVD with Windows files. The procedure is as follows:

Connect a USB flash drive (or disk) and boot from the media.
A window for setting the date and time will appear. click “Next”.
When the installation window opens, select the “System Restore” item. As a result, a diagnostic screen will appear (it is slightly different from the previous version).
Next, select the items: Diagnostics. Add. parameters. Command line.
In a new window, write: bcdedit / set globalsettings and press Enter.
After eliminating all errors, write the line in the command editor. bcdedit / deletevalue advancedoptions. This will disable the transition to the diagnostic screen when the OS is turned on.
Close it and click “Continue”.
After rebooting, the system will offer to choose a boot method. click F4. The PC will now turn on in safe mode.

Boot from disk or USB stick

And another simple option for starting Safe Mode in Windows 8 is through a bootable USB flash drive or DVD with Windows files. The procedure is as follows:

Connect a USB flash drive (or disk) and boot from the media.
A window for setting the date and time will appear. click “Next”.
When the installation window opens, select the “System Restore” item. As a result, a diagnostic screen will appear (it is slightly different from the previous version).
Next, select the items: Diagnostics. Add. parameters. Command line.
In a new window, write: bcdedit / set globalsettings and press Enter.
After eliminating all errors, write the line in the command editor. bcdedit / deletevalue advancedoptions. This will disable the transition to the diagnostic screen when the OS is turned on.
Close it and click “Continue”.
After rebooting, the system will offer to choose a boot method. click F4. The PC will now turn on in safe mode.

You can also enable the mode in Windows 8 in 4 different ways.

The first two are detailed at the beginning of the article. The other two are quite similar to the options that work for Windows 10, but we’ll still go over them in more detail to make it easier for you to navigate.

Safe mode startup via system configuration

To open the “System Configuration” window, you need to press the R key combination, enter the msconfig command and click Ok.

A window will open in which we go to the “Download” tab. If you have several operating systems installed (like mine, in the screenshot below), then select the required one, check the box next to the “Safe Mode” item, Click the “Apply” button and “Ok”.

There are boot parameters that can also be changed:

Minimal. Normal Safe Mode, loading only the most essential drivers.
Another shell is safe mode with command line support.
Network is a mode with loading network drivers (network support).

After clicking on “Ok”, the computer will ask you: exit without rebooting, or reboot. You can agree. After restarting, when you turn off your computer, Windows 10 will boot into Safe Mode.

To then disable this feature, and boot the system as usual, in the window with the system configuration settings, uncheck the box next to the “Safe Mode” item.

As you can see, this is a very simple and working way.

Boot disk to boot Windows 10 in safe mode

This method is only useful if Windows 10 won’t boot. We need a boot disk, or a USB flash drive. They can be recorded on another computer. If you do not know how to do this, then you can see the instructions for burning a bootable disk. And how to write Windows 10 to a USB flash drive, I wrote here: https://prostocomp.net/sistema/kak-zapisat-Windows-10-na-fleshku.html.

We boot from a disk, or USB drive. Through the BIOS, setting the boot priority (more details here), or through the boot menu (usually F11).

In the window with the choice of language, click “Next”, and select the item “System Restore”.

Then click on “Troubleshooting”, and run the command line.

bcdedit / set safeboot minimal is to start in normal safe mode.

If you need a mode with network support, then run this command:

bcdedit / set safeboot network

And if you still need command line support, then we execute one of the above commands, plus this one:

bcdedit / set safebootalternateshell yes

We close the command line and restart the computer. Or select “Continue (exit and use Windows 10)”.

To boot the computer in normal mode and undo the above commands, you need to run the following command: bcdedit / deletevalue safeboot.

This command can be executed on the system by running the command line as administrator, or by the method described above, by booting from a disk or flash drive.

If you have more than one operating system installed: according to the idea, the command is executed for the system that boots by default (as it was in my case). But, when executing the above commands, the error “Unable to open boot configuration data. The requested system device cannot be found. ” While on a computer with one installed Windows 10, everything worked with a bang. Honestly, there was no longer a desire to understand this.

Working way. And even when Windows 10 no longer boots, there is a chance to boot the computer in Safe Mode and fix the problem with starting the system.

How to enter Win 7 Safe Mode at system startup

Reboot: enter the Start menu and select the Restart option.
Starting safe mode in Windows 7 is the same as in XP, and is done through F8. As soon as the computer starts to boot, hold down the button and hold it until you enter the required mode. Your task is to activate the key before the Windows logo appears, that is, to “catch” the moment between turning on the device and directly loading the OS. If you do not have time or are distracted and the system starts to boot, you will have to restart your computer again. Remember that on laptops the F1-F12 keys work together with the Fn pressed.

The described method explains how to enter safe mode in Windows 7, and to understand that you are logged in, pay attention to the information on the screen. The system will prompt you to troubleshoot your computer and choose from three options:

Safe mode. Prefer this option if you want to load standard drivers, programs and services without the ability to work on a local or global network.
Safe mode with loading network drivers. This option loads the drivers for the network card, which means that you can work on LAN or on the Internet: search for information or files. If the error occurred due to the drivers of the network card, this method will not work.
Safe mode with command line support. In this case, the system provides access to the command line, from where you can enter commands and control the OS.

All three options are absolutely workable and differ only in the degree of confidence in using the PC. Use them to roll back Windows to the desired restore point, remove malware or inadequately working drivers.

How to return the menu with Windows 10 boot options via the F8 key?

As I wrote above, you can return the menu that is invoked by pressing the “F8” key when you turn on the computer. And with its help, load the top ten in safe mode. If there is no need for this particular method, then it is better not to use it.

Run Command Prompt as Administrator.

Next, you need to run the following command:

bcdedit / deletevalue bootmenupolicy

Restart your computer and immediately press the F8 key. The usual menu with boot options should appear. Among which will be safe mode.

To disable this menu, run the following command in a command line running as administrator:

bcdedit / set bootmenupolicy standart

What is Safe Mode on a laptop

How to enter Win 7 Safe Mode from the system?

If the system is already running, you can enter safe mode as follows:

Press the WinR key combination. A command window will appear in front of you.
Enter K and confirm the action. Settings will open.
Find the line “Download”, click on it and check the box on the item “Safe Mode” in the value “Minimum”. Click “Apply”.

In this way, you can enable Windows 7 Safe Mode both at the moment and later when you restart your PC.

The third way to enable safe mode on a laptop on win 7

This method is for the lazy. just force the laptop to quit. For example: remove the battery and disconnect the mains.

It could be easier. Press and hold for a few seconds (until everything turns off) the shutdown button.

Then just turn on and you will see a menu for 30 seconds in which you can select various ways to start the laptop. the very first one on the list is the one you need.

That’s all, I think one of the three options will definitely suit you. Successful problem solving.

I can’t enter Safe Mode: what to do

If it fails to boot using Safe Mode, then most likely this is due to the presence of malware. You can try to enable antivirus applications that will allow you to delete virus-infected files.

There are also times when the laptop owner cannot log into the Windows system (for example, a large banner appears on the screen and any actions are simply impossible) or into safe mode. In these situations, only installing a boot disk can help.

In certain cases, this is due to a registry violation. To solve this problem on the Internet, you can find files that have the.reg permission, made for a specific operating system. But no one can give 100% guarantees that these files will help.

You also need to pay attention to the fact that on the device, the functional “F” buttons are sometimes disabled in the BIOS (or they are activated only during the simultaneous combination with the Fn button). In this case, the Hot Key Mode (and similar) is considered. It is for this reason that sometimes on mobile computers it is impossible to enter Safe Mode using the F8 key.

To troubleshoot all sorts of problems, use Windows 7 Safe Mode. it will help get rid of crashes that cause Blue Screen or, as the people say, “Blue Screen of Death”. Often, such difficulties arise after installing new software or updating a driver, which leads to a computer freeze or cyclic reboot. It is not easy to notice a problem right away, because it only appears after a system restart. Today we will learn how to activate safe mode in the “seven” to run the OS with a package of basic drivers, services and programs.

How to start a laptop in safe mode

Safe Mode may be necessary to diagnose your computer, remove malware, and other necessary actions. But in order to use all the useful features of Safe Mode on a laptop, you need to know how to connect it. There are no significant differences between turning on on a regular computer and a laptop, but there are a number of features that should be noted.

What is Safe Mode on a laptop

How to start a laptop in safe mode: ways

The reasons why the operating system won’t boot can be completely different. And most often they recommend drastic actions. rearrange Windows. But during the installation of a new operating system, all information is lost, which can be critical for every laptop user. Therefore, you need to activate the safe mode on the device, and try to fix the problem that has appeared.

Safe Mode connection for all gadgets, or rather the operating system, is different. For example, if you are wondering how to enter Safe Mode in Windows 7, then the recommendations on how to enable Safe Mode on a laptop with Windows 10 are useless.

For Windows 7, you can try the following option:

find the power key in the “Options” menu;
hold down the SHIFT button by clicking “Restart”;
then a list of options will appear on the laptop screen, in which you need to click “Diagnostics”, “Additional parameters”, “Boot methods”, “Safe mode”;
at the bottom of the monitor a window will appear indicating “Restart”;
you need to click this button, the display will show 9 menu items, of which 3 options refer to the required connection.

Reference! If you click the F4 button, then the safe mode is activated, if F5, then a reboot with support for network drivers will occur, if F6, then you can use the command line.

Reboot methods for any OS

There are several basic boot methods that are suitable for all laptops. The first option is to get into Safe Mode:

turn off the laptop to start a full reboot of the operating system;
close all programs that were independently launched during startup. It is possible to do this with the “Exit” command for each defined program;
click the left mouse button to turn off;
after that you need to wait a couple of minutes and turn on the laptop again;
find the required mode among the possible suggestions.

Prepare for a slow reboot process. It can take different time for different laptops, in some cases it can take more than 10 minutes. Sometimes it even seems that the device is not working. So the user who started the laptop may think that the device just “hung”.

Do not rush to restart or turn off the device. During malfunctions of the operating system, it will not boot using the selected method, but the laptop will restart automatically or turn itself off. In this case, the monitor will be black, and the “Safe Mode” entry method will appear at the top.

Reference! There is another way that guarantees a secure connection of the gadget almost 100%. The main steps of the action are as follows.

You just need to constantly press F8 while booting the device. After that, options for the download method will appear, you must specify the one that is required. If the F8 button did not give the desired result, then you must press the F12 key. Most often, the list of laptop connection options activates one of these buttons.

There is a small chance that none of the above options will solve the issue with downloading the gadget. In this situation, there are several alternative ways.

For example, for Windows 8, you can make a system recovery disk (the boot disk is done by yourself) or try to boot using a USB port.

For Windows 7, the simplest boot option is the System Configuration submenu. In order for all of the described boot options to show the required result, it is necessary to deal with them in detail before the problem appears, in this case all actions will be performed confidently and with the appropriate result.

I can’t enter Safe Mode: what to do

If it fails to boot using Safe Mode, then most likely this is due to the presence of malware. You can try to enable antivirus applications that will allow you to delete virus-infected files.

Sources:

http://vsesam.org/kak-vklyuchit-bezopasnyj-rezhim-na-noutbuke/
http://semenalidery.com/yazyki-programmirovaniya/kak-zagruzit-noutbuk-v-bezopasnom-rezhime.html
http://radioshema.ru/internet/kak-zagruzit-noutbuk-v-bezopasnyj-rezhim.html
http://setafi.com/elektronika/noutbuk/kak-zapustit-noutbuk-v-bezopasnom-rezhime/