How can you hide a router in the hallway. And where the wires are cleaned above the door? (+)

Router in the closet in the hallway

Wireless technologies are increasingly used to transmit information. A good example is a Wi-Fi router, the installation of which in the apartment allows you to go on the Internet from all devices: laptops, tablets, phones without using a cable. To achieve a stable signal, you must not only carefully consider software settings, but also properly place the device. I’ll tell you how to do this in this article.

Walls, interior partitions. all these structures provoke a weakening of the signal. It turns out that its maximum power will be achieved in the room where the router is installed. To achieve a confident reception throughout the apartment, you need to place the device so that there are as few barriers between it and the receiving devices as possible. In the apartment I will recommend accommodation in the hallway, this option is optimal for at least two reasons:

  • It is convenient to connect the cable of a twisted pair to the router, entering the apartment from the entrance.
  • The layout of two.room apartments suggests that from the hallway there is access to all rooms, that is, there will be a minimum of barriers in the way of the signal.

If we talk about a specific location point, I advise you to fix the transmitter on the wall or put it on a high closet. No need to hang a router behind mirrors, chests of drawers, wardrobes. all this will provoke a deterioration in the signal.

Are Wi-Fi harmful?

There is no unambiguous opinion on this subject, but many scientists believe that constant radiation is a danger to the cardiovascular and nervous system. It’s better not to take risks. do not put a new router in the bedroom and children’s.

The answer to this question is quite simple: this is how the most uniform distribution of waves in the apartment is achieved. If there is an opportunity to put it on the cabinet, it is worth doing. Of course, this statement is relevant only for cases of lack of serious barriers on the path of signal distribution.

Wi-Fi and mirror cabinet. The story of not only a router.

We all communicate here thanks to this excellent achievement of science and technology, some of the subscribers are subscribers of our super-duper of the advanced company of the Internet provider, somewhere here there are at least one of our deputy gender (hello, Maxim) on the site-whose- then subscribers.

And the subscriber is always right (just like a pedestrian). And his rightness carries through time, space and shocking air. Spraying saliva, he requires. Demands, demands and demands again. It requires the declared speed, requires “not a single gap”, peace worldwide and comprehensive freebie.

The truth is to understand the laws of physics, to understand the principles of equipment work, the subscriber does not want to read the instructions and even more so the terms of the contract and sincerely believes that he is not obliged.

Well, now expensive subscribers, I want to wipe you a little theory, why your Internet does not work as you want. Accept this truth as it is, and if you do not agree, leaf through the tape further, maybe there are boobs there.

Let’s start with a simple one. Cable speed.As a rule, the provider promises a certain speed of data transmission. At the same time indicates the maximum possible for a specific tariff. And we (as subscribers) want everything at this maximum speed and work. Always and without looking at anything.But figs there. There is a company’s service traffic, let it be small, but it is always there. He will be the first to swim slightly speed from your maximum.Or maybe you have a weak subscriber? Then prepare for the fact that the percent cannot cope and does not pump the channel (a piece of a swallowed pie is limited by the width of the pharynx).Antivirus also wants to check traffic. And until he checks the package. he will not miss it. (strongly simplified) And if the antivirus still missed the evil, then perhaps the computer gives 99% of its resources to cheerful crypto meners. Well, or through your channel now pimples are downloaded porn teenagers.But I indicated about wi.ai in the title. Better I will tell about him.

Having walked around the apartments a lot, I noticed that in 70% of cases, the wiring under the Internet looks approximately the same: next to the front door there is a 220V outlet and a piece of cable or the Internet socket. The tail is displayed out the door. Everything, this is the preparation for home Internet in the apartment is over.But the approximate picture of the distribution of the Wi-Fi signal by the apartment:

The dear picture. And she will not decide to install a beautiful new expensive two.band router. Because the 5G signal passes through the walls much worse than 2.4g. So if you have good walls, and not Japanese shoji, a fashionable second range will not help you.

And some also put the router in the closet. The cabinet itself can be considered conditionally radio-proof, but if this cabinet has mirror walls That’s it, consider that your wi-yu will remain there, in this closet. The mirror awesomely reflects not only our faces, but also the Wi-Vai signal (I only saw mirrored radio transparent doors once. It was the cheapest cabinet in the most fierce ghetto, I don’t know what was there for the coating, but it spent well a radio signal)

We are going on. We put the router, we stuck in the center of the apartment, but still the speed of something somehow does not please.And our apartment is natural in a volume house for 800 apartments. And all the neighbors have the Internet, everyone has a router And the router has some kind of shaitan channels. That is, broadcasting frequencies. Their number is very, very limited.You see neighboring Wi-Fi networks on your laptops and phones? Of course you see.But this is how the Wi-Fi Analyzer program sees it

It shows that several routers use one channel. the same frequency for data transmission. And the device of the router is such that, having caught the data transfer by another device on his channel, he will interrupt his own, so to speak, release the air. In short, they will work in shape. And in principle, this would not be so noticeable, but we are in a volume house for 800 apartments. And radio transparent ceilings made by the dendrophecal method do not really interfere with the signal of neighboring routers. So the picture will most likely be this:

And the Wi-Fi signal can be a great microwave (although if you have a wai.ai when you turn it on, I would recommend a urgent to get rid of this hellish thing), a radio telegon and a lot of everything.

By the way, and you knew that you can also pick up the virus in the firmware of the router? It is very possible.And it is also recommended to update the firmware of the router at least sometimes, because the manufacturer does not just release these versions of new firmware, oh not just like that but do you know how to do it? Or for you a router is just a box with the Internet?

I hope to someone I opened my eyes a little to the work of the router, and someone more rogsty now neighing and is preparing in the Комментарии и мнения владельцев like a puppy to mate in the theory. I’m ready, honestly. I have not finished much, because I don’t remember or I don’t know.All the pictures are honestly licked from the Internet, so forgive me.

How to hide a router and counters in the hallway

For a long time I did not think about this problem. Because I didn’t have it. The counter lived at the site in the entrance, like a guard dog in Konura, and in childhood, I remember, I was surprised when I found out that it was different otherwise. And having learned, I was glad that in our apartment there is no such happiness: it is very much, it was happiness, it looked ugly and official.

Now a lot of water has flowed, there are more meters, and such a good of civilization as a router appeared. And with the problem, how good it is to hide from sight, almost all of.

Running RJ45 Network Cables inside wallsand fixing Wi-Fi problems!

And some understand her too literally. Mounters hide, for example, in a cabinet. Now tell me, it is very convenient for you to climb there with a flashlight every time you need to see something or check? Beauty, of course, requires victims, but in some cases they can be avoided.

Counters or router can be settled in your own locker. Small, neat, compact, with a beautiful door. Such doors are on sale, and you can look for an option that will approach your interior.

And if nothing suitable was found? Then you can make a door to order or take the finished and use it as a stand for.

And here it opens the scope for imagination. For whatever.

Mirror. His style will depend on the frame that you will choose. It all depends on your interior. The mirror in the hallway needs in any way, so why not at the same time do not serve you another service, blocking the electricity meter or router? You can fix it as you like, some even bilateral tape take it. But we advise you to choose the most reliable devices. If you are not sure of your own skills, it is better to invite the master for such work.

Another great option is the picture. True, here you will have to take into account the lighting in the hallway. The paintings are suitable not only to close the holes in the wallpaper, they want to admire them.

You can choose a series of paintings. One will close one counter, the other-the third will hide the router, the fourth will hang just like that, and the guests are admired by a stylish composition, and it would not occur to anyone that she has some kind of technical purpose.

And where do you keep the keys? In a saucer on the nightstand? Or they are so in the keyhole and live? Why not get a keychain? It is easy to combine with a cabinet for a counter or router. Klynes are enough for sale, you can choose the finished to your liking. Or purchase a workpiece and arrange it, as the soul wishes.

And if the reluctance to occupy the hallway with paintings or change the already favorite mirror, then you can simply glue the cabinets with the same wallpaper as on the wall. Surely you have any scraps after repair. Then no meters will definitely call your eyes.

You will find more interesting materials about modern furniture and interiors here.

How to decorate a router above the front door

They wanted to in the pantry, but as a result lies in a box under the TV. A box with a matte glass, and the router is not visible and the TV prefix of norms reacts to the remote control.

I hang over the pantry and the front door, in the future I will buy a box and hide. All wires were drawn in the walls under the ceiling and dumplings were displayed under TV). I really like the shield at the entrance there, and if something with the network is so quickly done and without climbing somewhere.

How can you hide a router in the hallway

Natalia Postnova

They wanted to in the pantry, but as a result lies in a box under the TV. A box with a matte glass, and the router is not visible and the TV prefix of norms reacts to the remote control.

I hang over the pantry and the front door, in the future I will buy a box and hide. All wires were drawn in the walls under the ceiling and dumplings were displayed under TV). I really like the shield at the entrance there, and if something with the network is so quickly done and without climbing somewhere.

Alena Kuzmenko

Tatyana Izmailian

On the closet, under the ceiling. If I hide it in the pantry, there is no Internet in the far rooms

Anastasia Gromova

Natalie Zollingen

Ira Sharonova

Now on the corner of the sofa in the hall is worth. In the new one decided to almost hang almost hanging in a corner under the ceiling. Made a socket for him and laid a cable with a new wiring. And from him for prefixes, they also scattered a cable around the rooms.

One is in the room next to the TV, the second in the kitchen in the refrigerator. In the cabinets, especially since the mirror is better not put

Designer model

Perhaps the most eccentric way to fit the router into the overall design of the house is to purchase a designer, because in the market of such goods you can find very interesting models. Such a gadget, even outwardly, does not at all resemble the gadget familiar to all of us, but looks like some kind of art object or decor element rather.

As a matter of fact, entering such a router into the interior is incredibly easy: we buy, install. and ready. True, there is a small minus. This way to hide the gadget is very expensive, but the fastest and most cool.

Association with a common interior composition

If you beat the router correctly, this is also a way to hide it. For example, the device can be put on some shelf, but be sure to place it in a beautiful wicker basket. Visually, it looks pretty pretty, and the gadget itself fit well into the situation.

These are simple ways that will tell you how best to hide the router so that it does not catch your eye. And what idea you liked the most?

A semi-scientific guide for the placement of a Wi-Fi-Rooter

С верхним этажом нашего испытательного дома проблем почти нет – хотя, как и многие дома, он страдает от ужасного расположения роутера, далёкого от его центра

We at the editors of ARS Technica often describe the Wi-Fi work scheme, we write about which sets behave best, and how future standards will affect you. Today we turn to a more basic topic. we will teach you how to understand how many access points you need and where to position them.

Need to Run Ethernet Without Drilling? Try THIS!

These rules are applicable if we are talking about one Wi-Fi-Rooter, about an ERO, PLUME or Orbi-or Orbi, or Ethernet Backhaul access point, like Ubiquiti or EAP from TP-Link. Unfortunately, these rules are more similar to recommendations, since with so many variables it is impossible to calculate everything for sure, sitting in a chair thousands of kilometers from your home. But if you get acquainted with these rules, you will at least better understand the practical aspects of what you can expect-and what is impossible-from your Wi-Fi equipment and how to squeeze out of it the maximum.

Preamble

Before you start with our ten rules, we will first go through the theory of radio waves-it will help you better understand some rules when you will understand how the power of the radio signal is measured and how it weakens with distance and due to obstacles.

Некоторые инженеры для максимальной скорости рекомендуют иметь сигнал не ниже.65 дБм

The graph above shows losses for Wi-Fi frequency (horizontally-the distance from the router, red lines mean a signal of 2.4 GHz without walls, or with the addition of one or two walls, blue-the same for 5 GHz). It is most important to understand the units of measurement: DBM is directly transferred to millivatts, only on a logarithmic decimal scale. When a 10 dBM falls, the signal power in the millivatts drops 10 times10 dBM. this is 0.1 MW.20 dBM is 0.01 MW, and so on.

Logarithmic allows you to add a signal drop in additive, and not through multiplication. Each doubling of the distance leads to a 6 dBM signal drop, and we clearly see this, studying a thick red curve for 2.4 GHz: 1 m signal.40 dBM, 2 m this.46 dBM, 4 m this.52 DBM.

Walls and other obstacles. including, but not limited to human bodies, cabinets, furniture, household appliances. will weaken even more a signal. Simple practical rule3 DBM for each wall or other significant obstacle. Subtle lines of the same color on the graph show the fall of the signal at the same distances when one or two walls are added (or other obstacles).

Ideally, I want to have a signal level of at least.67 dBM, but there is no need to worry about raising it much higher than this mark. usually the difference in speed between the powerful.40 dbm and frail.65 DBM is not, let them be far from each other on the graph. Wi-Fi work is influenced by much more factors than just a signal power; As soon as you exceed the minimum, it does not matter how exactly you exceeded it.

In fact, a too powerful signal can be the same problem as too frail-many users on the forums complain of low speed until some smart person asks them: you placed the device directly next to the access point? Put it away by a meter or two and try it again. And, of course, the problem disappears.

Rule 1: no more than two rooms and two walls

Our first rule for placing an access point (TD) is no more than two rooms and two walls between TD and devices. The rule is quite vague, since rooms are of different sizes and shapes, and different houses have a different composition of the walls. but this is a good point of the counting, and it will serve you well in the houses of typical size and apartments with quite modern interior walls made of drywall.

A typical size, at least in most of the United States, means 3-4 meters long bedrooms and living rooms 5-6 meters along one of the walls. If you take nine meters as an average distance covering the “two rooms” and add two internal walls, by.3 DBM for each, our crooked loss of radio waves shows that the signals by 2.4 GHz will feel great with the indicator.65 DBM. With 5 GHz, the situation is not so good. if we need all 9 meters and 2 walls, then we will go down to.72 DBM. This is enough to establish a connection, but only. In real life, a device with a signal on.72 DBM for 5 GHz will see approximately the same throughput as the device on.65 DBM at 2.4 GHz. however, formally slower communication at 2.4 GHz will be more stable and show less delays.

Of course, all this, provided that our only problems will be the distance and weakening of the signal. Users in rural areas and in houses with large plots have probably already noticed this difference and clarified the practical rule “2.4 GHz is cool, but 5 GHz is full suck”. City residents or owners of houses standing on a site the size of a postage brand have a completely different experience, which we will take into account in the 2nd rule.

Если уж мы начинаем заниматься построением меш-сетей, мы готовимся по полной.

Rule 2: too high transmission power is bad

The plus of the signal for 2.4 GHCs is long.range and effective penetration through obstacles. The minus of the signal of 2.4 GHCs is long.term and effective penetration through obstacles.

If two Wi-Fi devices at a distance of “audibility” are transmitted from each other at the same frequency at the same time, they do not come out: the devices for which they transmit the signal do not have the opportunity to understand this and understand which of the signals is intended for them. Contrary to common opinion, it does not matter whether the device is on your network or not-the name and password of Wi-Fi do not have any meaning.

In order to avoid such a problem for the most part, any Wi-Fi device must first listen to the air before the transfer-and if any other device already transmits at this frequency range, then ours should shut up and wait for the end of the transmission. This does not completely eliminate the problem; If the two devices are decided to transmit at the same time, they will “collide”-and everyone will need to choose a random period of time, which they will spend in anticipation before trying to transfer something again. The device, which has chosen a shorter random number, begins the first-if they do not choose the same random number, or some other device will not notice the respite on the air and does not decide to transmit a signal, ahead of both.

ways to imperceptibly lay LAN cable in the apartment

Typically, the Internet cable starts up in the apartment and a Wi-Fi-rower or router is connected in the hallway. One Wi-Fi Roatter will be enough only for a small apartment, since the speed of the Internet in other rooms will significantly deteriorate due to the obstacle to the walls, and the speed of the router always “cuts” its restrictions. For a high.speed connection with the declared speed of the provider, wiring throughout the house/apartment is done:

RJ45 socket is connected at each point. But how to stretch the wires. Choose you. We offer five main.

Laying in corrugated tube. Thinks before the repair

The most reliable, safe and demanded method.

But the calculations of the gaskets, the number of sockets and their location are thought out in advance before the repair, because in this case, the wires are laid in a corrugated pipe intrastrous.

At the output, RJ45 is installed with standard dimensions of 45×45 mm that can, if desired, can be combined on one frame with electric, television, acoustic and other types of outlets.

Hide in cable channels. As a post.embassy solution

Plastic boxes that are laid on the surface of the walls, and options with internal partitions contain several cables at the same time.

Such a gasket in second place. The wiring is hidden, and protected from mechanical damage and from electromagnetic radiation.

Cover in skirting boards. Partial repair work option

These are skirting cable channels. two in one. This installation is simple (easily can be assembled yourself) and has an aesthetic appearance.

But with this installation there are questions. How to get a wire into the room, then to stretch it into a baseboard, and if the house is multi.storey and you need to stretch the wiring to the second floor.

To do this, you still have to either stroke the walls, or use the wall cable channels, as an addition.

Lay a new cable in the place of the old. Option for the lucky ones

If your house has already been laid in a cable corrugated tube (provided in advance) or you decided to install the LAN cable in the place of the old. Replace it and install one or more sockets at the output.

Decor

The easiest method, but the least safe. If it so happened that the cable laying cannot be performed on any of the above options, or part of the wire is still on the surface. can be decorated, or temporarily hidden.

Routers and routers often hide in decorated boxes, into the covers from the books. The wiring is hidden under the table, or attached to the wall behind the furniture. On an ongoing basis, we do not recommend using this laying method, but for a temporary solution to the problem. This is a great option.

ways to imperceptibly lay LAN cable in the apartment

Typically, the Internet cable starts up in the apartment and a Wi-Fi-rower or router is connected in the hallway. One Wi-Fi Roatter will be enough only for a small apartment, since the speed of the Internet in other rooms will significantly deteriorate due to the obstacle to the walls, and the speed of the router always “cuts” its restrictions. For a high.speed connection with the declared speed of the provider, wiring throughout the house/apartment is done:

RJ45 socket is connected at each point. But how to stretch the wires. Choose you. We offer five main.

Laying in corrugated tube. Thinks before the repair

The most reliable, safe and demanded method.

But the calculations of the gaskets, the number of sockets and their location are thought out in advance before the repair, because in this case, the wires are laid in a corrugated pipe intrastrous.

At the output, RJ45 is installed with standard dimensions of 45×45 mm that can, if desired, can be combined on one frame with electric, television, acoustic and other types of outlets.

Hide in cable channels. As a post.embassy solution

Plastic boxes that are laid on the surface of the walls, and options with internal partitions contain several cables at the same time.

Such a gasket in second place. The wiring is hidden, and protected from mechanical damage and from electromagnetic radiation.

Cover in skirting boards. Partial repair work option

These are skirting cable channels. two in one. This installation is simple (easily can be assembled yourself) and has an aesthetic appearance.

But with this installation there are questions. How to get a wire into the room, then to stretch it into a baseboard, and if the house is multi.storey and you need to stretch the wiring to the second floor.

To do this, you still have to either stroke the walls, or use the wall cable channels, as an addition.

Lay a new cable in the place of the old. Option for the lucky ones

If your house has already been laid in a cable corrugated tube (provided in advance) or you decided to install the LAN cable in the place of the old. Replace it and install one or more sockets at the output.

Decor

The easiest method, but the least safe. If it so happened that the cable laying cannot be performed on any of the above options, or part of the wire is still on the surface. can be decorated, or temporarily hidden.

Routers and routers often hide in decorated boxes, into the covers from the books. The wiring is hidden under the table, or attached to the wall behind the furniture. On an ongoing basis, we do not recommend using this laying method, but for a temporary solution to the problem. This is a great option.

Lay a new cable in the place of the old. Option for the lucky ones

If your house has already been laid in a cable corrugated tube (provided in advance) or you decided to install the LAN cable in the place of the old. Replace it and install one or more sockets at the output.

The easiest method, but the least safe. If it so happened that the cable laying cannot be performed on any of the above options, or part of the wire is still on the surface. can be decorated, or temporarily hidden.

Routers and routers often hide in decorated boxes, into the covers from the books. The wiring is hidden under the table, or attached to the wall behind the furniture. On an ongoing basis, we do not recommend using this laying method, but for a temporary solution to the problem. This is a great option.

To ensure wireless connection, the apartment uses a router with a Wi-Fi module. To cover the distant corners of the home, you need to place a router in the center of the house (equidistance from all devices). As a rule, this point is in the hallway. And to hide a plain box with protruding wires from prying eyes, the owners often hide the router in the wardrobe.

Competent installation of network equipment in the closet of the hallway

  • Typically, the device has mounting holes on the bottom for attaching it to the wall. Screw a couple of screws into the side panel of the cabinet and hang a router on them.
  • For the second method, you do not need to spoil the walls of the furniture. Bilateral tape will come in handy. It happens on a foamed, tissue and polypropylene basis. For small routers, the first option is suitable, it is better to fix the hard ones on an ultra.strength tape.
  • You can just put the transmitter on the shelf. For a model with an external antenna, choose a place that it retains a vertical position and does not interfere with storage of things.

A simple marking method for mounting a router

Difficulty, as a rule, causes the supply of power and network cable to the device. To do this, you need to drill a hole of a suitable diameter at the mounting site. In the case when the installation of the router occurs during the repair, the cable under the stretch ceiling will be optimal. Then the insert into the cabinet case will remain invisible under the decorative film.

Of course, we must not forget about the features of wireless communication. Interference in the form of a cabinet can reduce the signal level. I advise you to study all ways to place a router in an apartment.

Cover in skirting boards. Partial repair work option

These are skirting cable channels. two in one. This installation is simple (easily can be assembled yourself) and has an aesthetic appearance.

But with this installation there are questions. How to get a wire into the room, then to stretch it into a baseboard, and if the house is multi.storey and you need to stretch the wiring to the second floor.

To do this, you still have to either stroke the walls, or use the wall cable channels, as an addition.

Lay a new cable in the place of the old. Option for the lucky ones

If your house has already been laid in a cable corrugated tube (provided in advance) or you decided to install the LAN cable in the place of the old. Replace it and install one or more sockets at the output.

The easiest method, but the least safe. If it so happened that the cable laying cannot be performed on any of the above options, or part of the wire is still on the surface. can be decorated, or temporarily hidden.

Routers and routers often hide in decorated boxes, into the covers from the books. The wiring is hidden under the table, or attached to the wall behind the furniture. On an ongoing basis, we do not recommend using this laying method, but for a temporary solution to the problem. This is a great option.

To ensure wireless connection, the apartment uses a router with a Wi-Fi module. To cover the distant corners of the home, you need to place a router in the center of the house (equidistance from all devices). As a rule, this point is in the hallway. And to hide a plain box with protruding wires from prying eyes, the owners often hide the router in the wardrobe.

Competent installation of network equipment in the closet of the hallway

  • Typically, the device has mounting holes on the bottom for attaching it to the wall. Screw a couple of screws into the side panel of the cabinet and hang a router on them.
  • For the second method, you do not need to spoil the walls of the furniture. Bilateral tape will come in handy. It happens on a foamed, tissue and polypropylene basis. For small routers, the first option is suitable, it is better to fix the hard ones on an ultra.strength tape.
  • You can just put the transmitter on the shelf. For a model with an external antenna, choose a place that it retains a vertical position and does not interfere with storage of things.

A simple marking method for mounting a router

Difficulty, as a rule, causes the supply of power and network cable to the device. To do this, you need to drill a hole of a suitable diameter at the mounting site. In the case when the installation of the router occurs during the repair, the cable under the stretch ceiling will be optimal. Then the insert into the cabinet case will remain invisible under the decorative film.

Of course, we must not forget about the features of wireless communication. Interference in the form of a cabinet can reduce the signal level. I advise you to study all ways to place a router in an apartment.