Honor BIOS how to go a smartphone. Reviews

How to enter the safe mode on Android (on Honor/Huawei, LG, Samsung, ZTE, etc.)

Good day!

Android, like Windows, has a safe mode. It is usually used in similar cases: in order to diagnose, when something suspicious happens on the phone, for example, you need to delete something “unable”.

Of course, only the most basic (basic) applications will work in this mode (without which normal phone/tablet is impossible).

Note: when you enter the safe mode. in the lower corner of the screen (usually in the left) there will be a small information message about this (by the way, in some cases a message in English: “Safe Mode”).

Ways to enter safe mode / Safe Mode

The most common way to enter a safe mode is to use a service menu that is caused by holding the power button (usually 3-5 seconds.) on the body of the apparatus.

When the service menu will be on the screen. it is enough to hold the “shutdown” item on the Nesk with your finger. seconds to make a system proposal to go into safe mode. Cm. The screenshot below.

After that, the device will automatically reboot and all third.party applications in the system will stop working (see. on the picture below: many icons have become gray and they cannot be opened. ).

Now the phone is safe

However, in safe mode, no one forbids to remove unnecessary applications, change the settings of the device, clean it from garbage, etc.D.

If you retain the “Turn off” item in the service menu of the device (see. method 1) does not help go to Safe Mode. most likely you have a somewhat excellent entry procedure. For example, this is often practiced on Honor devices.

• Turn off the device (press the “Turning on” button and when the service menu appears to select “Turn off”);
• Next, “squeeze” the volume reduction button;
• turn on the device;
• As a rule, at the stage of the appearance of the device’s logo, the volume button can be released;
• The task should be solved, the device will load in safe mode.

Note: In some cases, the volume reduction button should not be pressed immediately (before turning on the device), but only after the logo appears on the screen.

Relevant for devices from Samsung, Meizu

• First you need to completely turn off the device;
• Next, turn it on again;
• As soon as the manufacturer’s logo appears. click on the volume reduction button (in some cases, you need to press it simultaneously with the power button);
• After that, the device is loaded in Safe Mode (after diagnosing and setting up the phone. just reboot the device to get out of this mode).

By the way, on some devices (for example, Honor), the safe mode does not open until it is connected to the phone to PC USB with a cable and install the special. HISUITE app. Why is that? God knows him.

How to get out of a safe mode

The most banal way is to simply reload the device (using the power button). By default, the device will boot in normal mode.

Set the inclusion button for 5-10 seconds Until the phone is automatically rebooted (this is a forced mode operating on 99.99% of devices).

“Hard Reset” through the Rekaway menu

This method can help if the system refused to start. This is necessary:

• enter the recovery menu (on most devices this can be done by clamping the inclusion and volume increase key);
• Select in the menu item “Wipe Data / Factory Reset”;
• agree with the choice.

After the discharge, your Huawei device will offer to reload.

“Hard Reset”. method of three buttons

This is the most radical way to perform “Hard Reset”. To fulfill it is necessary:

• Close the power button and both volume buttons;
• After the logo appears with the name of the device model, you need to release the inclusion key (the volume key cannot be released);
• wait until the device starts the reboot again and release the volume buttons.

If you want to get a completely working system, place the “Dload” folder with firmware on the memory card and install it in the device before performing one of the methods. Then, when rebooting, the firmware automatic installation will begin and you will receive a device that is really restored to the factory state.

Safe recovery menu items

In the Erecovery menu, most Huawei phones models are present: the following items are present:

There may be others regarding the cleaning of the cache or update update from an external source, but these are the main.

The most secure of them are the last two: rebooting and turning off.

The first menu item offers to download the last backup and restore software and data. They should use only the case if the archives were created. This is a very useful function for disciplined users.

Reset to factory settings. a radical solution to the phone problems. But in this case, all settings and personal data can be lost.

If the Huawei smartphone has entered the Erecovery mode on its own and the opportunity to move between the menu items is preserved, it is safe to reboot or turn off the phone. After repeated inclusion, usually all functions are restored, while personal data, including contacts, are saved.

What to do to get out of the emergency recovery mode

If the Huawei phone, after rebooting, returns to the Erecovery mode, and you can’t get out of it in the usual way, you should first check the assembly:

• Turn off the device;
• Remove the back cover;
• Remove the battery;
• Insert the battery again;
• Gently return the lid to its place;
• Turn on the smartphone.

When installing the lid, carefully check so that the volume and power buttons are not clamped by the lid in the on state.

If the above actions have not led to the result, let the battery completely be discharged, and then completely charge the battery before turning on.

If this did not help Huawei get out of the Erecovery mode, act one in turn, in the following order:

What to do to get out of the emergency recovery mode

If the Huawei phone, after rebooting, returns to the Erecovery mode, and you can’t get out of it in the usual way, you should first check the assembly:

• Turn off the device;
• Remove the back cover;
• Remove the battery;
• Insert the battery again;
• Gently return the lid to its place;
• Turn on the smartphone.

When installing the lid, carefully check so that the volume and power buttons are not clamped by the lid in the on state.

If the above actions have not led to the result, let the battery completely be discharged, and then completely charge the battery before turning on.

If this did not help Huawei get out of the Erecovery mode, act one in turn, in the following order:

• Try to clean the cache through the Huawei Erecovery menu, then reboot the smartphone;
• reset the settings to the factory (personal data may be lost);
• Contact the service.

Safe recovery menu items

In the Erecovery menu, most Huawei phones models are present: the following items are present:

There may be others regarding the cleaning of the cache or update update from an external source, but these are the main.

The most secure of them are the last two: rebooting and turning off.

The first menu item offers to download the last backup and restore software and data. They should use only the case if the archives were created. This is a very useful function for disciplined users.

Reset to factory settings. a radical solution to the phone problems. But in this case, all settings and personal data can be lost.

If the Huawei smartphone has entered the Erecovery mode on its own and the opportunity to move between the menu items is preserved, it is safe to reboot or turn off the phone. After repeated inclusion, usually all functions are restored, while personal data, including contacts, are saved.

What is a safe mode and why it is

Safe Mode. the built.in function of all modern phones that allows you to enter the operating system without loading installed applications and only with system settings. The need to include safe mode on Honor may occur in the following situations:

• Identification of smartphone viruses. After entering Safe Mode, you can determine the correctness of the mobile device without third.party software, after which you can decide on the need to clean.
• Checking the functionality. In the work of the camera, speakers, sensors or other elements of the device, failures may occur. If you enter the safe mode on Honor, it is easier to determine the cause of the appearance of such a problem-due to system failures or mechanical malfunction.
• Verification of work by. If you enable Safe Mode on Honor, it is easier to identify a problem application and delete it. Often the problem in the work of the device appears after installing some kind of program. If you remove it, you can solve the issue quickly.

In other words, if you go into safe Honor mode, you can test the device only with the shell installed at the factory. At the same time, it is easier to identify defects in the work, problematic software or the causes of temporary failures.

How to use

To correctly use the capabilities of Safe Mode, you need to know how to enable the safe mode for Honor 10 Lite or turn it off in the absence of necessity. In each of the cases, several ways can be distinguished in which we dwell separately.

How to turn it on

Depending on the situation and the Honor model, you can choose one of three ways to enter safe mode. Briefly consider the features of each option.

• Turn on the phone.
• Click on the Power button on the right side of the Honor and hold it until the menu appears with options.
• Squeeze and hold the point “Turning away”.
• Wait for the appearance of a request that allows you to enable safe mode on Honor 10 or other model.
• Click on not him and confirm the transition.
• Wait for the restart and make sure that the corresponding inscription appeared below and you are in the “clean” version of.

A way to turn on a safe mode on the Honor phone:

• Disconnect the Honor smartphone in the usual way.
• Turn it on by pressing the power button.
• Click and hold the volume button during loading.
• Fix the Honor key until the manufacturer’s logo appears on the screen and a vibration rod is felt. If it’s hard for you to catch the right moment, you need to turn on the smartphone and hold the volume reduction button until the operating system is completely loaded.
• Make sure everything is done correctly, and the inscription “Safe regime” lit up at the bottom.

Recognizing Safe Mode is very simple. If you managed to turn it on, there will be no icons installed independently on the screen, but only those that were immediately after buying a mobile device. In this case, you can immediately proceed to testing for the fact of software or mechanical failures.

Additional opportunities for Honor and Huawei

For some devices, Honor and Huawei, the manufacturer thought out Project Menu, an alternative to Engineering Mode. Here information shows without the ability to regulate certain settings. We will analyze what sections are in PROJEC Menu and what they are responsible for.

USB debugging is carried out and some characteristics are changing. Savorns that the menu is not in Russian, so you should resort to the translator.

This item is responsible for different information about the installed operating room, firmware and programs.

Information about SIM cards and the place of manufacture of a mobile device was collected here.

This section allows the user to create a software update to the new version.

This item should be extremely careful, since when clicking on the OK button, the mobile gadget will begin to the factory settings and all the third.party data will be completely erased from it.

This shows information about the state of the battery. For example, the temperature of the battery and the remaining charge.

Close the PROJECT Menu can be pressed by the “back” button.

Actions on the engineering menu are designed for developers, not ordinary users. Incorrect actions can lead to improper operation of a mobile gadget and data loss. So before starting Engineering Mode, think well whether it is worth it.

OnePlus

Hold the power button and the volume reduction button until the onenPlus logo appears and the “Powered By Android” inscription.

Select English (“English”) button or clicking on the corresponding point if the Rocovery menu touch.

Press and hold the power button and the volume increase key to enter the FASTBOOT mode. Using the volume control keys, select the “Recyvery Mode” item and go to the recovery menu through the power button. Install English by choosing “English”.

Chinese phones with MTK processors: DOOGEE, Blubo, BlackView, Oukitel, Elephone, UMI and others hold the Volume “UP” “UPL”. When the menu appears, go to the “Rocovery” item with the VOLUM “UP” button and confirm the choice using the VOLUME “Down” key.

We convert the device into Rocovery mode via a computer

Download and install ADB and drivers, connect andRoid to the computer by USB and turn on USB debugging. Run the command line or Windows PowerShell and enter the next command:

In PowerShell, add \ or /.

Click on ENTER, after which the device will be re.loaded into RECOVERY mode. You can find more information about the use of ADB in this instructions.

The reasons

A problem forms due to a Root-pile on internal servers, which in turn arise when data loss during update. As a result, it becomes very difficult to operate the phone. Significant lags are observed in work.

Problems are manifested as follows:

• The upgrade occurs incorrectly;
• The database does not answer;
• installation is in a non.standard way;
• The phone automatically uses not Wi-Fi, but mobile Internet.

When Shutdown is pressed or the developers of breakdown developers, a dark display is displayed without the possibility of choosing other tasks.

How to go to Recovery mode to Huawei and Honor

To enter the Recovery mode on Huawei and Honor, you will have to take several simple actions:

• Squeeze the power buttons at the same time (turning on the smartphone) and volume increase;
• keep the keys clamped for a few seconds;
• wait for the desired mode to appear on the screen.

It is important to emphasize that it will be possible to enter the recovery only from the device off. If the phone is turned on, starting the function will not work, regardless of the desires of users.

If the approach described above does not help to achieve the desired effect, and the desired mode will not start on Honor, you should go into it in another way:

• Squeeze the power button and decrease the volume at the same time;
• keep the keys clamped until the desired result is achieved;
• Go to the use of recovery.

about Huawei: how to change IMEI for Android through an engineering menu, have shift programs on the Android phone

Separate attention is deserved by the fact that on old Huawei phones buttons buttons of reducing and increasing sound were replaced by the “home” key between them. Sometimes it is necessary to press it.

In case of difficulties with the activation of the function and the opening of the menu, the keys should be clamped for a longer time. Perhaps the difficulties were precisely in the insufficient closing time, so it is easy to achieve the discovery of the recovery and cope with the difficulties.

Why does Android not go to Recovery?

There are no official recovery on some smartphones at all, so you have to immediately install a custom. If the inscription “There is no” with a lying robot appears on the screen, this means that there is recovery, but problems arose when it launches. To eliminate the problem, quickly click on the power button and the volume increase key.

If Android is categorically not loaded into the recovery, then the reason for this behavior may be an error that can also be eliminated by installing custom Recovery. If the installation of a custom recovery does not help, you should contact the service center. it may take place of hardware damage, which is impossible to eliminate with software methods.

If the device starts in normal mode, it will be necessary to make backup copies of all important information as soon as possible. If the phone is seriously faulty or physically damaged, then it can lose all important data.

A simple way to solve the problem

Before starting the next step, it is strongly recommended to turn off the phone. Remain in the recovery mode and manipulate the buttons is unsafe, because it can do what if it cannot be turned on

If the mode does not turn on when holding buttons, it is recommended to get into it through the ADB Fastboot Tools.

You need to turn on the USB debugging in the phone settings, then connect it to the PC and enable the program. Here in the main menu, select “Rebooter”. “Reboot Into Fastboot Mode”. The device will reboot and enter Fastboot.

If for some reason the smartphone does not go into the required mode, it is recommended to reflash the gadget or wait for the new version in which this error will be eliminated.