Failed to connect to Xiaomi camera

Why can’t I connect to the camera on my phone

Let’s figure out the reasons why the camera stops working:

  • One of the reasons is firmware update. If the camera fails after updating the Android version, the operating system should be rolled back and reinstalled.
  • Damage to the camera setup modules. This result is caused by serious mechanical effects on the apparatus, corrosion of the internals due to the ingress of liquid, fatigue failure on units of old technology.
  • Virus programs. Malicious programs can knock down the correct operation of the camera, which can easily enter the computer of the device when it is not protected by antivirus applications.
  • Clogged module cache.

Medium difficulty methods

These are the standard steps you can take when the application displays the error message “Failed to connect to the camera.” Try using them all. it should help. And do not forget to stop the application and restart it before each new attempt to connect the camera. The methods given here to fix the error “Failed to connect to the camera” do not carry the risk of losing saved photos and videos.

  • Go to the “Settings” Android device;
  • Select “Applications”;
  • Find the camera app and select it;

In the application menu, click “Clear cache” and “Clear data”, confirm your actions;

Reboot the device, or force-stop the camera app (disable / enable) before making another attempt to start the camera.

B) Removing and reinstalling updates Go to the same settings of the camera application, as shown above. If there is an option to uninstall updates, then do it. But remember that you should not use older versions of the apps, so you will have to visit the Play Market to update the camera app again.

B) Check Permissions (Android Marshmallow only) Android Marshmallow has a personalized system for allowing access to main applications. You must confirm that your camera app has permission to access the camera. Usually, if the required permission is missing, it is requested during application launch.

  • Go to “Settings”. “Applications”. “Cameras”.
  • Click on “Permissions”.
  • Make sure the Camera Resolution slider is moved to the right. You can turn it off and on again.

Camera won’t turn on on Android

When the camera does not work on Android, the system, as a rule, signals this with special system messages. It could be “Unable to connect to camera”, “Camera error” or a set of code characters. Try switching the camera mode from front to main and vice versa. If the system warning is displayed only in one mode, most likely everything is normal at the hardware level, and one of the lenses or related spare parts needs to be repaired.

It also happens that the camera turns on, displays the image from the lens on the screen, reacts to the display buttons, but does not save images and videos. Try to delete unnecessary things from the phone’s memory, perhaps the device simply does not have enough free space to save. Also, the problem may be hidden in the settings, where the application is simply not allowed to save files on this device.

Users of low-cost devices manufactured by small companies are more likely to encounter problems when using the camera.

If you have any questions. let us know Ask a question

Mi pad failed to connect to camera

as an option, replace the stock application, it was the same for me too, I could not find a solution, except to install gcam, everything is clear.

Infernion as an option, replace the stock application, it was the same for me, I could not find a solution, except how to put gcam, everything is clear.

Camera error. Failed to connect to Android camera. what should I do? The surest way to troubleshoot your camera is to contact a service center. But sometimes outside interference and spending substantial sums on repairs can be avoided. How?

Available methods

A) Reboot Users reported that the camera starts working after rebooting the Android device. Sometimes you have to reboot the gadget several times to achieve the desired result. In any case, it makes sense to try this elementary method. turn off and then turn on your smartphone or tablet.

B) Reboot in Safe Mode Every Android device has a “Safe Mode” boot function, that is, you reboot the phone and turn it on, activating only the basic applications and a limited number of available functions. Safe Mode is great for troubleshooting as downloaded applications will be disabled and you will be able to determine if there is really a conflict between various third-party software and system software related to camera use.

To restart in safe mode:

Erro ´´ Connection Timed Out ´´ Da Xiaomi Resolvido ( Resolved )( Mi Home )

  • Turn off the device.
  • Hold the power button for a few seconds until the shutdown menu appears.

Confirm you want to restart your device in Safe Mode.

When starting in safe mode, enable the camera system app. View some photos, then exit the app.

Turn it on again and see if it works.

If the camera works normally in safe mode, then you have narrowed down the search for the causes of the error. The problem lies in the conflict of third-party applications with the system software. It is because of them that you are unable to connect to the camera. Your next steps:

C) Remove conflicting third-party applications Try uninstalling third-party camera-related applications. These are applications that can take pictures in the course of their work. For example: Snapchat, Whatsapp, etc. Surely there are programs on your smartphone or tablet with which you can take photos directly from the application and share them. Remove such programs one by one, checking after each uninstallation if the error has disappeared. If you were able to connect to the camera, you found a third-party application conflicting with the system software. And one more thing: do not forget to switch between video, panoramic shooting and other modes during the test. the problem may appear in any of them, and it is important for us to restore the full functionality of the camera.

If you managed to launch the camera from a third-party application downloaded from Google Play, then the problem lies in the official system application for it. Try the following:

    Go to Settings. Applications. Cameras;

  • Remove updates, if any;
  • Clear the cache and data;
  • Failed to connect to camera

    When entering the camera, a system message like “Failed to connect to the camera” may appear on the screen, the screen may simply be painted black, and the application may close spontaneously. If you are faced with such a problem, first inspect the lens. New packed gadgets have a camera protected by a special film, perhaps you simply did not pay attention to it and forgot to peel it off. If the gadget has been at your disposal for a long time, pay attention to the presence of contamination. Visual inspection can also reveal the presence of mechanical “injuries”. this situation will not do without paid professional intervention.

    • Restart your phone and try logging into the camera again. Sometimes the problem goes away by itself.
    • Run a search for malware on any antivirus and remove them.

    Sometimes a simple cleaning of the phone from unnecessary programs and files helps. Clogged memory simply does not have room for simple basic operations.

    Consider if you have installed any new components on your phone. They probably have a negative effect on the camera’s performance. If there are any, delete them and check if the camera is working.

    Perhaps you recently changed something in the settings menu and accidentally disabled access to the camera. Carefully review the phone settings, the problem may be hidden there too.

    If the above manipulations have not been effective, only a specialist will deal with your problem. To carry out competent diagnostics and high-quality repairs, inform all important points about the operation of your gadget, list the recent events that probably influenced its work.

    How to solve this problem

    • Clear cache. Find the camera app in settings, erase data and cache.
    • Update your camera app. Perhaps its version is outdated and is not compatible with the current firmware of your phone.
    • Try installing any other photo and video application. For example Camera Zoom FX. If it does not work, at least you will definitely determine that the problem is technical and not software.

    It all starts with the fact that when you try to use the camera of an Android device, you first see a blank screen with a camera icon in the center, and then you receive the message “Failed to connect to the camera.” Sometimes it is possible to use the camera after restarting the device, but, as a rule, the error rate increases, and soon it becomes simply impossible to use the photo module to take a couple of photos. Many users also complain that they receive a similar error message when trying to shoot video at the minimum resolution (240p). Is there any way to fix the situation? Let’s try together to figure out what is happening and find available ways to solve the problem on our own.

    Troubleshooting Methods for Advanced Users

    Attention: these methods for correcting the error “Failed to connect to the camera” when used entail the loss of data saved on the Android device. In order not to lose contacts, photo galleries, games, music and other content, you need to back up. Save photos, account information and apps backup to your Google account. All of this will be reinstalled after adding the same Google account to the device.

    A) Clear cache This action allows you to clear the device’s system of temporary data. obsolete and only cluttering the memory. This option is activated in Recovery mode, which becomes available after restarting the phone using the bootloader.

    To clear the cache, follow these steps:

    • turn off your Android device;
    • hold down the volume and power buttons at the same time to start the phone. you will see an image of an Android robot;
    • navigating with the volume button, switch to Recovery mode;
    Read more:  Hard Reset Xiaomi redmi 4x

    After clearing the cache successfully, restart your phone and try launching the camera app again. Please note that your Android device may have a different combination of buttons to access the maintenance and recovery mode.

    B) Resetting to factory settings Resetting the settings is considered the most radical way to solve problems, as it entails a complete loss of data. But if no other methods help, then you will simply be forced to use it. However, backing up will help save the data, and re-configuring the device will only consolidate the skills of working with Android devices. Here are two methods using which you can reset your phone or tablet to factory settings.

    • Turn off your phone or tablet;
    • Press the “Volume.” and “Power” buttons at the same time to restart the device (you will see the Android robot);
    • Select the option that prompts you to return to factory settings (Factory or Factory Reset) by pressing the power button to confirm.
    • Go to Android Settings.
    • In the “Advanced” tab, find the options “Restore and reset”.

    Ingress of moisture into the case

    If it was found that the camera on Xiaomi stopped functioning immediately after water got inside the case, then the first thing to do is turn off the smartphone. Next, a SIM card and a memory card are removed from it.

    After that, you should try to dry the phone as best as possible. The best option is to put it in a container filled with rice for a day. Then you can additionally dry the product with a hair dryer.

    However, this option cannot guarantee 100% restoration of the device’s performance, because water could oxidize contacts and microcircuits, which will cause the module to fail.

    Redmi 4x failed to connect to camera

    Probably, there is not a single user who has not used a camera on their mobile device at least once. The camera is a very useful tool in a person’s daily life.

    With its help, you can capture important moments of your life and share them with others.

    We invite you to our Viber community and YouTube channel

    However, this function does not always work as we would like. Often when you try to take a picture, the error “Failed to connect to the camera” appears on the screen. In order to choose the correct method for solving the error, you need to find out the reason for its appearance.

    How to get rid of the error “Failed to connect to the camera”?

    Not infrequently, the “Failed to connect to the camera” error occurs due to physical damage, for example, the camera cable could come off. Some users were helped by not applying too much pressure to the camera body. Thus, it is possible to restore contact between the camera and the device.

    However, remember that you do all such manipulations at your own peril and risk. If you are sure that physical damage is causing your camera problems, the best solution is to take your device to a service center.

    Another reason for the error may be a failure in the software part of the device. To fix the error, you can try using the methods below.

    • Reboot the device.

    Reboot your device. Perhaps after that, the camera will stop malfunctioning.

    If normal reboot did not work for you, try rebooting immediately after starting the camera. This method can be much more effective.

    • Removing the memory card.

    Physical removal of the memory card often helps to get rid of camera problems. Before removing the SD card, you need to disconnect, for this:

    1) go to “Settings”, go to the “Memory” section and select “Memory card”;

    2) click “Disconnect” and remove the card from the device.

    • Removing conflicting applications.

    The error “Failed to connect to the camera” appears, or there may be a conflict with another application. The application causing the conflict can be any application that has access to the camera and is capable of taking photos. A lot of such applications can be installed on the device, so in order not to delete each of them, you can boot the device in safe mode. When you turn on safe mode, only standard applications will work on the device, and not those installed by you.

    The method for enabling Safe Mode differs depending on the brand of the device. For example, on Samsung devices, to enter safe mode, you need to turn off the device, turn it on and wait until the Samsung logo appears on the screen, and then hold down the “Volume.” Whatever the method for enabling safe mode, the system will notify you when it starts.

    Check if the camera is working in safe mode. If there are no problems with the camera, then the reason for the error is a conflict with another application. Reboot the device, thus disabling the safe mode. Remove the last installed applications that have access to the camera one by one. After deleting each of them, check if the camera works. If the camera is working again, then the application causing the conflict has been removed. Thus, you can understand which application is causing the conflict.

    • Clearing Camera Data.

    Sometimes this error appears due to a malfunction of the standard camera application. In this case, resetting the built-in Camera application can help you. For this:

    1) go to “Settings”, go to “Application Manager”;

    2) select the “Camera” application and click the “Clear data” button;

    3) stop the application by clicking “Stop” and confirm the action;

    4) reboot your device.

    • Grant all permissions to the Camera app.

    This method is relevant for the newest versions of Android. Permissions give the application the right to perform certain functions on the device. Check if all permissions have been granted to the Camera app.

    1) Go to “Settings”, go to “Application Manager”;

    2) select the “Camera” application and click on the “Permissions” item;

    3) for the “Camera” to work, all permissions must be enabled.

    • Using third-party applications.

    Try installing a camera application from the Play Market, for example, Candy Camera or Camera 360. Perhaps when using these or similar applications, the camera on your device will work.

    • Resetting the device to factory settings.

    If none of the previous methods worked, perhaps a factory reset will help you. However, remember that performing a factory reset will erase all data on your device. To perform a reset:

    1) go to “Settings” and go to the “Backup and reset”.

    2) in the item “Reset” click “Reset data” (the name of the items may differ) and confirm the action.

    These methods should help you get rid of the “Failed to connect to camera” error on Android.

    It all starts with the fact that when you try to use the camera of an Android device, you first see a blank screen with a camera icon in the center, and then you receive the message “Failed to connect to the camera.” Sometimes it is possible to use the camera after restarting the device, but, as a rule, the error rate increases, and soon it becomes simply impossible to use the photo module to take a couple of photos. Many users also complain that they receive a similar error message when trying to shoot video at the minimum resolution (240p). Is there any way to fix the situation? Let’s try together to figure out what is happening and find available ways to solve the problem on our own.

    Troubleshooting Methods for Advanced Users

    Attention: these methods for correcting the error “Failed to connect to the camera” when used entail the loss of data saved on the Android device. In order not to lose contacts, photo galleries, games, music and other content, you need to back up. Save photos, account information and apps backup to your Google account. All of this will be reinstalled after adding the same Google account to the device.

    A) Clear cache This action allows you to clear the device’s system of temporary data. obsolete and only cluttering the memory. This option is activated in Recovery mode, which becomes available after restarting the phone using the bootloader.

    To clear the cache, follow these steps:

    • turn off your Android device;
    • hold down the volume and power buttons at the same time to start the phone. you will see an image of an Android robot;
    • navigating with the volume button, switch to Recovery mode;

    After clearing the cache successfully, restart your phone and try launching the camera app again. Please note that your Android device may have a different combination of buttons to access maintenance and recovery mode.

    B) Resetting to factory settings Resetting the settings is considered the most radical way to solve problems, as it entails a complete loss of data. But if no other methods help, then you will simply be forced to use it. However, backing up will help save the data, and re-configuring the device will only consolidate the skills of working with Android devices. Here are two methods using which you can reset your phone or tablet to factory settings.

    • Turn off your phone or tablet;
    • Press the “Volume.” and “Power” buttons at the same time to restart the device (you will see the Android robot);
    • Select the option that prompts you to return to factory settings (Factory or Factory Reset) by pressing the power button to confirm.
    • Go to Android Settings.
    • In the “Advanced” tab, find the options “Restore and reset”.

    Xiaomi smartphones, including budget versions, are equipped with high-quality photo modules that allow you to get bright and vivid photos even in low light conditions. If the user found a significant decrease in the quality of the images, then the problems may lie in both physical damage to the module and some software errors.

    The most common reason for the failure of a photo module on Xiaomi is its physical damage as a result of a fall or impact. If obvious defects (chips, scratches, etc.) are found, it is unlikely that it will be possible to restore the device’s performance on its own, so it is better to repair smartphones in specialized Xiaomi service centers in Yeisk, where a full-fledged diagnosis of the device will be carried out beforehand.

    Installing custom firmware

    When deciding to install an unofficial version of the firmware, the user must clearly understand that it can pose a potential danger to the gadget. So, “custom” shells often contain viruses or dangerous applications that can negatively affect the functioning of not only the camera, but also other modules.

    Solutions to the problem. installing the official firmware version or resetting the system to factory settings. Before performing these activities, it is recommended to save your data to a third-party media.

    Also, the refusal of the Xiaomi camera to take photographs may be associated with a glitch in the MIUI shell. In this case, you can try to reboot the device or install a new firmware version.

    Available methods

    A) Reboot Users reported that the camera starts working after rebooting the Android device. Sometimes you have to reboot the gadget several times to achieve the desired result. In any case, it makes sense to try this elementary method. turn off and then turn on your smartphone or tablet.

    Read more:  Xiaomi Redmi 4a Microphone Does Not Work

    B) Reboot in Safe Mode Every Android device has a “Safe Mode” boot function, that is, you reboot the phone and turn it on, activating only the basic applications and a limited number of available functions. Safe Mode is great for troubleshooting as downloaded applications will be disabled and you will be able to determine if there is really a conflict between various third-party software and system software related to camera use.

    To restart in safe mode:

    • Turn off the device.
    • Hold the power button for a few seconds until the shutdown menu appears.

    Confirm you want to restart your device in Safe Mode.

    When starting in safe mode, enable the camera system app. View some photos, then exit the app.

    Turn it on again and see if it works.

    If the camera works normally in safe mode, then you have narrowed down the search for the causes of the error. The problem lies in the conflict of third-party applications with the system software. It is because of them that you are unable to connect to the camera. Your next steps:

    C) Remove conflicting third-party applications Try uninstalling third-party camera-related applications. These are applications that can take pictures in the course of their work. For example: Snapchat, Whatsapp, etc. Surely there are programs on your smartphone or tablet with which you can take photos directly from the application and share them. Remove such programs one by one, checking after each uninstallation if the error has disappeared. If you were able to connect to the camera, you found a third-party application conflicting with the system software. And one more thing: do not forget to switch between video, panoramic shooting and other modes during the test. the problem may appear in any of them, and it is important for us to restore the full functionality of the camera.

    If you managed to launch the camera from a third-party application downloaded from Google Play, then the problem lies in the official system application for it. Try the following:

      Go to Settings. Applications. Cameras;

  • Remove updates, if any;
  • Clear the cache and data;
  • Medium difficulty methods

    These are the standard steps you can take when the application displays the error message “Failed to connect to the camera.” Try using them all. it should help. And do not forget to stop the application and restart it before each new attempt to connect the camera. The methods given here to fix the error “Failed to connect to the camera” do not carry the risk of losing saved photos and videos.

    • Go to “Settings” of your Android device;
    • Select “Applications”;
    • Find the camera app and select it;

    In the application menu, click “Clear cache” and “Clear data”, confirm your actions;

    Reboot the device, or force-stop the camera app (disable / enable) before making another attempt to start the camera.

    B) Removing and reinstalling updates Go to the same settings of the camera application, as shown above. If there is an option to uninstall updates, then do it. But remember that you should not use older versions of the apps, so you will have to visit the Play Market to update the camera app again.

    B) Check Permissions (Android Marshmallow only) Android Marshmallow has a personalized system for allowing access to main applications. You must confirm that your camera app has permission to access the camera. Usually, if the required permission is missing, it is requested during application launch.

    • Go to “Settings”. “Applications”. “Cameras”.
    • Click on “Permissions”.
    • Make sure the Camera Resolution slider is moved to the right. You can turn it off and on again.

    Xiaomi Camera Diagnostics

    Before contacting the service center, you can independently diagnose the photo module, for which you need to go to the engineering menu. To do this, just dial the following combination of numbers and symbols: ###.

    In the window that opens, select the required test (PlatMainCamera and PlatFrontCamera), depending on which camera is not working. Running the test lets you know if the system detects the module as a physical sensor.

    If the system fails the test, it means that replacement of the failed element is required. If the camera is turned on, then you need to take a picture and select the “Checkmark” icon. After that, the photo will be displayed in the engineering menu. If the operation is successful, you must click on “Delete” to delete the test snapshot.

    If the test is successful, that is, the camera successfully copes with its task, you need to look for the problem elsewhere.

    If all the proposed troubleshooting options do not help, then almost certainly a full diagnostics of the device and its professional repair are required.

    • In contact with
    • Instagram
    • Telegram
    • Youtube

    Any consultation: 8 (861) 238-71-98

    Xiaomi Redmi 9 quickly runs out of battery. Configuring autonomy

    Warranty

    Attention! We are not responsible for all your manipulations with the phone, performed according to our instructions. A qualified technician should carry out repairs. Contact the repair service offered by us.

    © 2021 REPAIR OF PHONES. Android-Shark.Ru ANY USE OR COPYING OF SITE MATERIALS WITHOUT ADMINISTRATION PERMISSION IS NOT ALLOWED.

    When the quality of pixels is determined, and among them it was possible to find “burnt out”, you can start looking for applications that will correct the situation:

    • JScreenFix is ​​easy to use, you need to use the Fix Stuck Pixels button to get started. The developer promises 30 minutes to complete this operation, but the service center masters recommend leaving the devices. Not less than 10-12 hours for a more complete check;
    • Pixel Fixer: Another program similar to JScreenFix. To restore pixels, you also need to click on the green button;
    • Dead Pixel Treatment: The platform does more than test a mobile phone for dead pixels. And then “heals” them, but at the same time reveals other defects in the display.

    When using applications, it is recommended that during the “treatment” the device does not disconnect it from the chargers. The smartphone is always on during pixel processing, so the charging may not be enough.

    Microcracks of the screen are fraught with a break in the power circuit. If this happens, then you will have to change the screen. Fortunately, in China, they are several times cheaper.

    It happens, and the malfunction lies in the incorrect installation of the SIM card or flash drive. Try to take them out and check what will happen.

    A map with problems can be repaired by restoring broken clusters using a PC.

    If shaken, a poorly positioned plug from the display may fall out. What will entail the disconnection of the image transmission module, or partial disconnection.

    Remove the cover of the device, and plug the ribbon cable into the socket. If it is inserted, take it out and insert it. In this case, do not forget to disconnect the power cable from the battery.

    Method 2. clearing the cache

    • Open the phone settings menu.
    • Go to the section “Applications”.
    • Find the default camera app and then tap on it.
    • Delete all accumulated program settings data.
    • Reboot your smartphone.

    Try to open the camera and take some pictures.

    How to fix the problem

    Testing an Android device in Safe Mode

    By analogy with stationary operating systems, mobile ones have several modes of operation, including “Safe”. The essence of safe mode is that a smartphone or tablet is loaded without downloading third-party applications, that is, only programs that are present in the device by default are activated. Accordingly, by loading the device in safe mode, you can check if the error in connecting to the camera is related to the operation of third-party software on the device.

    To start your Android smartphone or tablet in Safe Mode:

    • Hold down the power off button until a menu appears with options for rebooting;
    • Then press and hold your finger on the option “Power off” or “Shutdown”, depending on whether there are third-party “shells” on the device or not;
    • After a while, a message will appear on the screen prompting you to reboot in safe mode, click “OK”.

    After loading the smartphone or tablet in safe mode, a corresponding note will appear in the lower left corner of the screen, confirming this fact.

    Important: On some devices, the way to enter Safe Mode is slightly different. If you cannot put your smartphone or tablet into safe mode using the method described above, we advise you to read the instructions for a specific device model, which should indicate how to perform this action.

    Try to start the camera in safe mode. If it works, you will need to find out which program is causing the error on the device. The most reasonable way is to uninstall applications one of the last installed, which may be related to the camera, and after each uninstalled program, reboot the device and see if the camera works. There are a lot of applications due to which the error “Failed to connect to the camera” may appear: Snapchat, Telegram, WhatsApp, Prisma and many others.

    Please note: If the camera starts loading after removing the next application, check it in all operating modes, it is possible that the problem has not been completely resolved.

    Failed to connect to camera on Android

    The appearance of errors during the operation of a complex operating system, such as Android, is not excluded, and users of devices with such software “on board” should be able to solve the arising malfunctions. The camera bug on smartphones and tablets running Google’s operating system is one of the more annoying ones. The camera is almost more often used in modern mobile devices than other functions, and if the message “Failed to connect to the camera” appears on the screen when it starts up, you will not be able to take a photo or video.

    “Failed to connect to camera”: what to do

    If an error occurs that prevents you from using the camera of your Android smartphone or tablet in full, you should not immediately resort to drastic measures trying to install a new firmware on the device. Even she does not help to correct the situation in all situations. There are a number of tips on what to do if you cannot connect to the camera on Android, and we will provide them below.

    Fix camera error 100% | Camera cannot connect error |Xiaomi device

    “Failed to connect to camera”: error symptoms

    An error can occur in the camera on Android for no good reason, even if the phone has not been updated to a new firmware version, has not fallen, has not fallen under water and other troubles have not happened to it. A problem can arise on its own, and therefore it is more difficult to find ways to solve it.

    The error “Failed to connect to the camera” on an Android smartphone or tablet can manifest itself in two situations:

    • When trying to start the camera. The viewfinder does not load and the user sees only an informational error message on the screen;
    • When trying to take a video. In some situations, the malfunction appears only when you try to shoot a video with a smartphone. At the same time, it is not always present with all recording settings, for example, many users complain about an error only when they try to record video in 240p resolution.
    Read more:  How to connect a set-top box to a computer

    In any situation, due to a malfunction, the functionality of the camera is drastically reduced or completely disappears.

    Clearing the cache of an Android device

    To get rid of the error “Failed to connect to the camera” in Android, you can try another way. by resetting the operating system cache. By deleting temporary data, in some situations it is possible to get rid of an error in the camera.

    Important: Before proceeding to the next steps, we recommend that you make a backup copy of information from your smartphone / tablet.

    failed, connect, xiaomi, camera

    To clear the entire system cache on an Android device, you need to do the following:

    • Turn off your smartphone / tablet;
    • Put it in maintenance and recovery mode. Different smartphones may require different steps to enter this mode. On “pure” Android and many other firmware versions, you need to hold down the volume and power buttons at the same time;
    • After 10-20 seconds of holding the required combination of buttons, a green robot will appear on the device screen. the corporate logo Android, after which the technical menu will start;
    • Management in the recovery menu occurs, most often, due to mechanical buttons (volume and screen lock). Select the transition to Recovery Mode from the menu;
    • Further, in the recovery mode, you need to find the item that is responsible for clearing the cache. Most often it is located in the “Wipe” section;

    When the temporary files are deleted, boot the smartphone in standard mode and check if the “Camera” application is working.

    Reboot the device

    The first thing to do if an error occurs in the camera of your Android smartphone or tablet is to restart it. The reboot process does not differ much from device to device. just hold down the screen lock button and wait for the menu to appear, where you can select the “Restart” or “Shutdown” item of the smartphone.

    When the device restarts, try restarting the camera. If the error persists, go to the next method.

    Using a third-party camera software

    Another way to fix the “Failed to connect to the camera” error is to test its operation when using a third-party application. In the Play Market, you can find a lot of programs that can replace the standard Camera application. For example, such programs include Open Camera, Camera 360, Camera MX and others. Download any of them or several at once and check if you can get rid of the error.

    If the third-party camera works without problems in all modes, it is likely that the native application has crashed. Try the following:

    • Go to “Settings”;
    • Then select the item “All applications”;
  • If possible, force stop and enable the application.
  • After following the steps above, try launching the Camera program again and see if it works.

    If clearing the data of the “native” “Camera” application did not help to solve the problem with its operation, and the third-party application continues to function without problems, you can use it by selecting it as the default camera program in the smartphone settings.

    Recovering and resetting your device

    If none of the above options helped to solve the problem with starting the camera and the error continues to occur, the cardinal way to eliminate it remains. a complete reset of the device. After completing the steps described below, all information will be deleted from the smartphone or tablet, and it will be reset to the state of a new device.

    To restore your device to out-of-the-box state, you need to do the following:

    • Run “Settings”;
    • Select the “Advanced” item;

    When even a full reset of the device does not help to resolve the “Failed to connect to the camera” error, the problem is most likely related to the hardware of the device, that is, to the failure of the camera module.

    Camera error: “Failed to connect to camera” on Android device

    It all starts with the fact that when you try to use the camera of an Android device, you first see a blank screen with a camera icon in the center, and then you receive the message “Failed to connect to the camera.” Sometimes it is possible to use the camera after restarting the device, but, as a rule, the error rate increases, and soon it becomes simply impossible to use the photo module to take a couple of photos. Many users also complain that they receive a similar error message when trying to shoot video at the minimum resolution (240p). Is there any way to fix the situation? Let’s try together to figure out what is happening and find available ways to solve the problem on our own.

    Medium difficulty methods

    These are the standard steps you can take when the application displays the error message “Failed to connect to the camera.” Try using them all. it should help. And do not forget to stop the application and restart it before each new attempt to connect the camera. The methods given here to fix the error “Failed to connect to the camera” do not carry the risk of losing saved photos and videos.

    failed, connect, xiaomi, camera

    A) Clearing cache and data

    • Go to the “Settings” Android device;
    • Select “Applications”;
    • Find the camera app and select it;

    In the application menu, click “Clear cache” and “Clear data”, confirm your actions;

  • Reboot the device, or force-stop the camera app (disable / enable) before making another attempt to start the camera.
  • B) Removing and reinstalling updates Go to the same settings of the camera application, as shown above. If there is an option to uninstall updates, then do it. But remember that you should not use older versions of the apps, so you will have to visit the Play Market to update the camera app again.

    B) Check Permissions (Android Marshmallow only) Android Marshmallow has a personalized system for allowing access to main applications. You must confirm that your camera app has permission to access the camera. Usually, if the required permission is missing, it is requested during application launch.

    • Go to “Settings”. “Applications”. “Cameras”.
    • Click on “Permissions”.
    • Make sure the Camera Resolution slider is moved to the right. You can turn it off and on again.

    Available methods

    A) Reboot Users reported that the camera starts working after rebooting the Android device. Sometimes you have to reboot the gadget several times to achieve the desired result. In any case, it makes sense to try this elementary method. turn off and then turn on your smartphone or tablet.

    B) Restart in Safe Mode Every Android device has a boot function in the “Safe Mode” function, that is, you restart your phone and turn it on, activating only the basic applications and a limited number of available functions. Safe Mode is great for troubleshooting as downloaded applications will be disabled and you will be able to determine if there is really a conflict between various third-party software and system software related to camera use.

    To restart in safe mode:

    • Turn off the device.
    • Hold the power button for a few seconds until the shutdown menu appears.

    Confirm you want to restart your device in Safe Mode.

    When starting in safe mode, enable the camera system app. View some photos, then exit the app.

  • Turn it on again and see if it works.
  • If the camera works normally in safe mode, then you have narrowed down the search for the causes of the error. The problem lies in the conflict of third-party applications with the system software. It is because of them that you are unable to connect to the camera. Your next steps:

    C) Remove conflicting third-party applications Try uninstalling third-party camera-related applications. These are applications that can take pictures in the course of their work. For example: Snapchat, Whatsapp, etc. Surely there are programs on your smartphone or tablet with which you can take photos directly from the application and share them. Remove such programs one by one, checking after each uninstallation if the error has disappeared. If you were able to connect to the camera, you found a third-party application conflicting with the system software. And one more thing: do not forget to switch between video, panoramic shooting and other modes during the test. the problem may appear in any of them, and it is important for us to restore the full functionality of the camera.

    If you managed to launch the camera from a third-party application downloaded from Google Play, then the problem lies in the official system application for it. Try the following:

      Go to Settings. Applications. Cameras;

  • Remove updates, if any;
  • Clear the cache and data;
  • Troubleshooting Methods for Advanced Users

    Attention: these methods for correcting the error “Failed to connect to the camera” when used entail the loss of data saved on the Android device. In order not to lose contacts, photo galleries, games, music and other content, you need to back up. Save photos, account information and apps backup to your Google account. All of this will be reinstalled after adding the same Google account to the device.

    A) Clear cache This action allows you to clear the device’s system of temporary data. obsolete and only cluttering the memory. This option is activated in Recovery mode, which becomes available after restarting the phone using the bootloader.

    To clear the cache, follow these steps:

    • turn off your Android device;
    • hold down the volume and power buttons at the same time to start the phone. you will see an image of an Android robot;
    • navigating with the volume button, switch to Recovery mode;

    After clearing the cache successfully, restart your phone and try launching the camera app again. Please note that your Android device may have a different combination of buttons to access maintenance and recovery mode.

    B) Resetting to factory settings Resetting the settings is considered the most radical way to solve problems, as it entails a complete loss of data. But if no other methods help, then you will simply be forced to use it. However, backing up will help save the data, and re-configuring the device will only consolidate the skills of working with Android devices. Here are two methods using which you can reset your phone or tablet to factory settings.

    Method I: From the recovery menu

    • Turn off your phone or tablet;
    • Press the “Volume.” and “Power” buttons at the same time to restart the device (you will see the Android robot);
    • Select the option that prompts you to return to factory settings (Factory or Factory Reset) by pressing the power button to confirm.

    Method II: From System Preferences

    • Go to Android Settings.
    • In the “Advanced” tab, find the options “Restore and reset”.