Error code 106 on LG Smart TV

Common errors on Philips TVs

Philips TV errors are more localized and generally less frequent, which may indicate better operating system stability. However, here it is worth taking into account the fact that the TV of this manufacturer is less widespread.

What errors are found on Philips TVs:

• Philips server not found. First, you should restart your TV and check the signal strength. After that, it is recommended to clear the application memory through the Network Settings menu. It may also help to specify a different IP address, it is possible that the current one is busy with another device. The last solution available is setting the correct date and time.
• Error playing any videos. Usually a software update helps.

Common LG TV Error Codes and How to Fix Them

The error codes of the LG TV are slightly different, even with the same problems as on the Samsung, the Fault ID will be different.

LG TV 49UJ6300 WIFI dropping problem

• Error 106. The most common cause of the problem is communication with the router at 5 GHz. It still does not always work properly. We recommend switching to the 2.4 GHz frequency, this can be easily done in the router settings.
• Error 137. This is a common problem, most often when trying to connect to a wireless network. It is important here to check that the password has been entered correctly. Even with error code 137 on an LG TV, it is worth restarting the TV and router. If it does not help, you should delete the network and reconnect to it.
• 105. This error is provoked by the lack of access or the inability to resolve addresses by the established DNS. First, you should try to reboot the devices, and only then change the DNS in the connection settings to 8.8.8.8 and 8.8.4.4. a public server from Google.
• 101 and 102. Errors indicate a failure in the server zone of the ISP. You just have to wait, nothing can be done.
• Error 6003. It has a not always clear nature of its appearance. One of the most effective fixes is to check the channel names. Most users have quotes or brackets in one of them, after removing it, access will reappear. If this does not happen, you just need to update, this also often helps.
• Correction of errors 201 and 501. The message says that there is no signal. If you have one, you should switch to the 2.4 GHz frequency (in the router settings). It is also worth trying to reset your router.
• Error 503. It occurs due to problems on the side of the web resource, which means that an ordinary user cannot do anything.

Popular mistakes on Sony TV

Sony TV errors are not so numerous, but they are also common.

• Error 1106. Appears when you try to download content from the Internet. You should go from “Settings” to “Help” in the section “Customer support” and select “Symptoms of the Internet connection”. The built-in diagnostic tool will either help you fix the problem or guide you in which direction to look for a solution.
• Error code 1002. You should check that the Internet is connected to the TV. After that, you should also run network diagnostics.
• Error 2200 Not a very informative issue that any network problem can cause. It is recommended to initially restart the TV and router, then set the time and date, update the TV and reset to factory settings. Installing Google DNS can also help.

Samsung TV error codes

First, let’s look at the errors of the Samsung TV, since there are a lot of them, and we already have more comprehensive information on them.

What to do if your Samsung TV displays errors with the following code:

• 102. Very often it’s just a network outage. There are also deeper problems: the blocking of the MAC address by the provider (you need to contact technical support) or problems in the settings of the router (it is worth resetting to the factory state). Even with error 102, updating the Smart Hub version can help.
• Errors 107, 116, 301. Often this code appears randomly and passes after the TV is restarted. It can also be provoked by a poor wireless network signal or incorrect connection settings. We recommend that you update your operating system and router firmware. Also, the matter may be in the unavailability of the server, you will have to wait a little.
• Error code 800. Almost all known occurrences are associated with blocking access to specific URLs at the router level. Also, error 600 may appear when connecting a Samsung TV to a network that is of the same nature, or “No updates found.” Disable update lock and work will resume.
• Error 1000-7. The problem appears to be due to lack of access to the server and continues while it is being serviced. Except for waiting, nothing can be done.
• 105. Apparently, error 105 appears due to the blocking of the TV by the Wi-Fi router. It is worth going to the TV settings, look at the MAC address and add it to the list of allowed in the admin panel of the router.
• Error 012. The problem appears when trying to open an application (most often), but it also happens when installing or updating. At first glance, it seems that the problem is in the utility, but it’s all about the Internet connection. It is worth restarting the TV and Wi-Fi router, make sure there is an outlet to the network and check the signal quality.
• Code 52. Restarting the router and updating its firmware often helps.

How to fix error codes on TV Samsung, LG, Philips, Sony?

Although TV error codes are unpleasant when they appear, they are a useful tool for diagnosing problems. By better understanding the nature of the problem, we can more accurately determine the cause of the problem and how to fix it. Of course, the LG TV error is not the same as the DEXP TV error, so you need to consider the situation separately for each manufacturer. We have researched the corners of the Internet and collected the most common error codes for different TVs. Our task is not only to describe their source, but also to help in correcting.

Common mistakes on TVs and how to fix them

There are many more errors that applications generate, due to which they can appear on any TV, regardless of the manufacturer. We put them in a separate list for the convenience of analysis.

• Error code vse_004. This is an IVI error on any TV company. To fix it, you need to clear the application cache and restart the device. If it’s not about temporary files, then it’s on the Internet. It is worth checking the connection, signal availability and internet speed.
• YouTube error on TV. They are very different, so we will not be tied to a specific message. If the TV says “playback error”, you should turn off the TV and turn off the power. It often helps. Then it is recommended to check your internet connection. Next, it is worth updating the application and the TV operating system itself. Removing and reinstalling YouTube may also work. The final solution would be to factory reset.
• An error has occurred on the TV in the app. The simplest and most effective solution is to reset your TV settings. Often it’s all about an application conflict, so the fix may be to remove the conflicting program.
• An error occurred while connecting the phone. If it fails when trying to duplicate a monitor via Wi-Fi Direct, it is best to try deleting all previously connected and saved devices. This helps a lot.

The entire list with error codes on TVs is simply immense, so we had to highlight the most common ones and make a short excursion through them. If you didn’t find the answer, couldn’t figure out how to implement the advice, or encountered another error, ask questions in the Комментарии и мнения владельцев.

No votes yet! Be the first to rate this post.

Reasons for the memory overflow error

Unsurprisingly, the software glitch alert only lights up on the TV screen when you go online. That is, standard TV viewing will be available. The built-in browser of the TV is used to play multimedia content. Sometimes an error appears when trying to start an audio track or enter a game.

How to fix Internet Wi-Fi Connection Problems on LG Smart TV. 3 Solutions!

Please be aware that this error is in no way related to the malfunctioning of a particular website. In addition, a software failure code may not appear immediately. For example, you first started a video, but after a few minutes it is interrupted and an alert appears on the LG Smart TV screen that there is not enough memory for the TV.

A banal page reload will allow you to eliminate the error for a certain time, but definitely not for long. After a few minutes, the code will appear again.

The error appears when the user tries to play the streaming video. Gradually, the free space for storing temporary files becomes smaller, because of this, the picture will take much longer to load. To avoid a software crash, try to use web portals where files are saved in blocks. As a result, it will be possible to avoid cache overflow in Smart TV.

There are several ways to solve the problem. As noted earlier, it is not possible to expand the internal memory. Therefore, it is necessary to install additional software to prevent the error from occurring. As a result, the content will be played through such programs.

The second way is updating webOS (smart TV operating system). It is possible that in later versions such failures will be eliminated. Since the software is constantly being improved by the developers of the equipment manufacturer.

How to clear the cache

The system requires the user to clear the cache in order to reduce the load on the RAM. However, it is absolutely not necessary to delete temporary files of absolutely all applications, it will be enough to clear the cache of the browser you are using.

Remember that deleting temporary files of absolutely all applications will lead to the fact that the settings in them will be reset to the default settings. You will need to log in to your account again.

How to clear memory on LG TV? It is enough to have a remote control handy. Follow the simple step-by-step instructions:

• First you need to go to the main menu of Smart TV. To do this, press the “Smart” button on the remote control.
• To the right or to the left (depending on the version of the installed OS) click on the “Change” button.
• Select the software you are using and click on the “Uninstall” command that appears in the window that opens.

This cleans up the memory of the LG TV. Therefore, temporary files of absolutely all applications will be deleted.

If you would prefer to clear the cache exclusively of the built-in browser, which you are using directly to play content, then follow these step-by-step instructions:

• Click on the “Smart” button to switch to Smart TV mode.
• Launch the built-in browser, and then in the right corner click on the settings menu icon.
• Select the “Clear cache” command, and then again confirm the performed action.

After a short period of time, the files saved by the browser will still be deleted. After cleaning is complete, absolutely all video and audio will start playing correctly, and the error will disappear. It is advisable to restart the TV immediately after cleaning.

How to Clear Cache on LG TV Easily and Easily

Without a doubt, the owners of LG TVs were faced with the problem of lack of memory. The error code appears on the screen as soon as the user tries to play any media content. over, regardless of the type of Internet connection: cable or wireless.

How to clear memory on LG TV, thereby restoring correct operation of Smart TV? There are several proven methods, in fact, which will now be discussed. If you get an “Out of Memory” error on your LG TV, you first need to determine what caused the software failure.

Removing applications

The internal memory stores not only temporary files, but also user-installed applications. Therefore, sometimes, in order to free up space, you have to delete applications from Smart TV that you do not use. This can be done in 2 ways.

How do I clear the memory of my LG Smart TV? First, move the cursor over the application you want to remove, then you need to open the context menu and select the “Remove” command. Confirm uninstallation again. This is how games, movies, various widgets and all kinds of programs are removed.

In addition, there is a different way to uninstall applications. Open the directory “My Applications”, and then move unnecessary files to the right corner of the screen, until the uninstallation begins. To complete the process, just confirm the action.

How to restart LG Smart TV and reset to factory settings

often, flashing is new options that simplify surfing the Internet or open up new functions and opportunities. Sometimes, when installing changes, the Internet connection disappears, a software failure occurs, the Smart Hub platform may not work correctly or be blocked. To restore functionality, you will need to restart the TV.

The easiest working method to reboot your TV is to unplug it normally. It is necessary to unplug the power cord from the outlet, wait a few minutes, then plug it back in. Please note that at the time of the power outage, the TV must be working. After disconnecting from the network, an automatic reboot occurs.

Updating your LG TV over the Internet

The easiest way to update Smart TV on your LG TV is via the Internet. For a stable connection, a cable connection from a router is suitable. All control is performed from the remote control. Actions are performed step by step.

• Select “Support”, then “Software Update”.
• Click on the line “Check for updates”.
• If there is a freshly released firmware version, the device will offer to update.
• Confirm actions by clicking on “Update”.

The process of downloading service pack modules takes from several seconds to several minutes. Download parameters depend on the installed software, Internet speed. In the future, you will need to reboot the device system.

How to find the right version

Several firmware options are available for one TV model. To select the firmware, you need:

• know the version of the currently installed firmware;
• in the offered available updates, select the version with the exact match of the letter designation;
• the numbers of the new version must not be less than the previous one.

Firmware update on LG Smart TV

There are several good reasons to modify your device’s firmware.

• Optimization of software work. Some TVs with more functionality come with older firmware versions. Emerging failures and errors are eliminated by collecting information, releasing a corrected firmware of a new version.
• Software response speed, channel switching speed, loading pages and movies, turning on programs, eliminating video player braking.
• New features and capabilities of Smart TV.
• Eliminate Smart TV problems. If Smart TV programs are not working properly, a black screen at startup, applications do not turn on, channels are interrupted and not resumed. One of the options to get rid of the problem is to update the installed platform and programs.

Updating from a USB stick

In the absence of a permanent connection to the Internet, the device is improved by downloading a new version from the manufacturer’s website. First, find out the TV code and the installed firmware version. How to do this, see the beginning of the article. For further actions, you need to use a PC or laptop.

• Go to the web browser at www.LG.ru. in the search bar, enter the code to detect the device and suggested updates.
• Find what you need and download.
• Create a folder named “LG_DTV” on the USB flash drive. Unpack the downloaded archive.
• Plug the USB stick into one of the USB ports on your LG Smart TV.
• Turn on the TV, go to the “Support” menu, “Software update” click “Update now”.
• Some models will recognize the webOS update on the drive on their own. A message will appear on the screen prompting you to install the update.
• Confirm the actions by clicking on the “Start” button, wait until the updates are fully installed.

The system will display a confirmation message about successful installation. For the changes to take effect, you need to restart the TV system.

How to Update LG Smart TV for Smooth Performance?

Updating LG Smart TV will improve the uninterrupted operation of equipment, eliminate the possibility of software failures, and also add new functions for Internet surfing, watching channels online. With the help of the instructions, you will learn how to carry out this manipulation.

Preparing to update the firmware

To prepare for the software update, they initially recognize the marking of the TV model and the presence of modifications. If actions are performed via the Internet, the need for information disappears. When installing from media, the information is important. Information about the marking, as well as the installed firmware version, can be easily found in the settings.

• In the settings, find “Support”, then “Product or service information”.
• In a new window that opens, the marking of the model is indicated. The sub-item “Firmware version” denotes the marking of the current firmware.

To update from a flash drive, write down the marking, software version or take pictures to save data.

Factory reset procedure

Using the Factory Reset function, you can restore the settings of the TV receiver to the original default values. This is done to fix any problems with the installed update. For devices with webOS, the algorithm for restarting the settings depends on the year of the TV and the version of the operating system.

• Enter the “Settings” menu by pressing the Settings key on the remote control or by using the gear icon on the screen. Select “Advanced settings”, sub-item “General” or “General”, go to the bottom line “Reset settings” or “Reset to Initial Settings”.
• Enter “Settings”, after “All settings” or the key with three vertical dots, select “General”. further “Reset settings”.

Next, by clicking on “OK”, confirm the reset of Smart TV to factory settings. The system will reboot to factory settings. In the process, it is absolutely impossible to disconnect the device from the power supply.

How to increase the memory of LG Smart TV

Every year “smart” TVs conquer users more and more. Undoubtedly, because they have many advantages compared to the standard ones: recording and playback of only the content that is of interest to you, the ability not to limit yourself only to movies, but also access to YouTube, social networks, full-fledged work with the browser, and much more.

An additional plus is the ability to connect such additional equipment as a keyboard and mouse. But even perfection has its flaws. Recently, many began to face the problem of lack of memory. What to do with this and where does it come from. we will consider in this article.

How to fix a memory overflow problem

Having carefully studied the specifics of the problem, there are several key ways to eliminate it:

• Start by updating the firmware. It is the outdated version of the operating system that can be the catalyst for the appearance of a software failure. It is possible that the new firmware version uses a completely different TV memory allocation. which will open up new possibilities for the user.
• Install dedicated software for streaming content. There are also special utilities that will clear the cache on your LG TV automatically. Such software also noticeably slows down the download speed.
• Reset the options to the “Default” value. To do this, open the settings, and then switch to the “Advanced settings” section. In the “General settings” tab there will be a command “Reset settings to factory settings”, use it.
• Insert your flash drive into a USB port. On some models, automatic saving of the cache to this flash drive is activated. However, this method does not help everyone.

In extreme cases, you can always contact the service center for help, so that qualified specialists restore the correct operation of the TV. However, mostly users manage to cope with everything on their own.

Without a doubt, the owners of LG TVs were faced with the problem of lack of memory. The error code appears on the screen as soon as the user tries to play any media content. over, regardless of the type of Internet connection: cable or wireless.

How to clear memory on LG TV, thereby restoring correct operation of Smart TV? There are several proven methods, in fact, which will now be discussed. If you get an “Out of Memory” error on your LG TV, you first need to determine what caused the software failure.

How to fix LG smart tv Wi-Fi connection issues / press like

Ways to solve the problem

Steps to follow for LG TV:

Press the “Home” button. go to “Settings”. go to “Advanced settings”. go to “General settings”. find “Factory reset”. confirm action.

Steps for Samsung TV:

Turn off the TV. press the Info, Menu, Mute, Power buttons at the same time and in this sequence. press the Mute, 1, 8, 2, Power buttons also simultaneously, without changing the sequence. the TV will boot into service mode. go to “Settings”. press the “Reset” button (Smart Hub settings will be reset as well, or they can be reset separately). confirm action.

You can insert a USB flash drive into the TV, the cache from the browser will be written to it, this method does not help everyone, however, it is worth trying.

Contact Support, a specialist, thanks to remote access, will change the firmware to a newer one, reset the settings to factory settings on his own, or try to find the essence of the problem and fix it in another way, you will only need to confirm the remote access.

How to clear the cache

The system requires the user to clear the cache in order to reduce the load on the RAM. However, it is absolutely not necessary to delete temporary files of absolutely all applications, it will be enough to clear the cache of the browser you are using.

Remember that deleting temporary files of absolutely all applications will lead to the fact that the settings in them will be reset to the default settings. You will need to log in to your account again.

How to clear memory on LG TV? It is enough to have a remote control handy. Follow the simple step-by-step instructions:

• First you need to go to the main menu of Smart TV. To do this, press the “Smart” button on the remote control.
• To the right or to the left (depending on the version of the installed OS) click on the “Change” button.
• Select the software you are using and click on the “Uninstall” command that appears in the window that opens.

This cleans up the memory of the LG TV. Therefore, temporary files of absolutely all applications will be deleted.

If you would prefer to clear the cache exclusively of the built-in browser, which you are using directly to play content, then follow these step-by-step instructions:

• Click on the “Smart” button to switch to Smart TV mode.
• Launch the built-in browser, and then in the right corner click on the settings menu icon.
• Select the “Clear cache” command, and then again confirm the performed action.

After a short period of time, the files saved by the browser will still be deleted. After cleaning is complete, absolutely all video and audio will start playing correctly, and the error will disappear. It is advisable to restart the TV immediately after cleaning.

Why Memory Overflow Errors Appear

The system notification about the lack of free memory appears on the TV screen when the user tries to open the browser. This means that you can watch terrestrial or satellite channels even with a full memory. However, streaming content requires a corresponding resource. Sometimes an error indicating the need to clear the memory of the LG Smart TV. appears when starting a game or playing music.

The appearance of this error is caused precisely by the lack of free space on the built-in hard drive, and not by problems in the operation of the browser or a particular site. Practice shows that the error text may appear far from the moment the browser is launched. For example, a user opened a website, launched a video, and only then a notification will appear on the screen that it is necessary to clear the memory of the LG Smart TV.

The most effective workaround is to simply refresh the web page. However, the software glitch will make itself felt again, perhaps after a couple of minutes. What exactly triggered the error when streaming content? This is due to the lack of memory space for storing temporary files. Therefore, movies, clips take longer to load than usual.

To avoid this error, use sites that store files in block. This memory layout prevents the cache from overflowing. The TV’s internal memory cannot be expanded. Therefore, users have to solve the problem in order to fully use the technique in the future.

Of course, there are preventive measures to avoid this software glitch. Try to clean your browser and TV cache in a timely manner. Be sure to install the latest updates for your Smart TV operating system. Outdated firmware version may cause performance degradation.

How to fix error 106 on LG Smart TV when connected to the Internet and Wi-Fi

Error code 106 on LG Smart TV is accompanied by the message “Network not connected. Check the status of the network connection. ” This problem is often encountered by both advanced users and newcomers who recently bought such a TV. If your TV has lost the network, or does not connect to it for a long time, this is a sign of a failure. There is no one size fits all solution. Each situation should be considered individually. In this article, we will talk about how to diagnose the cause of the problem and solve it quickly.

The reasons

Error 106 when connecting to the Internet on LG TV occurs under the following circumstances:

• wi-fi is not available;
• you placed devices too far apart;
• the security settings have been changed on the router, and the key for authorization is no longer available.

What error 106 means on LG Smart TV

In simple words, this is the lack of connection to a Wi-Fi access point. If the TV does not have Wi-Fi, then it will not see the networks available in the range in any way. But there are circumstances, for example, TV does not recognize any specific wireless point.

• if you have a built-in Wi-Fi module, then at the first start you will need to connect to your home router;
• if, upon subsequent switching on, in the range of this point, the contact cannot be established, then an error with code 106 will pop up on the screen;
• an error with such a code will also appear when you move the TV to a more distant room, where the signal does not finish.

There is a separate situation. the frequency is 5 GHz. Not all TVs can see it, but only very powerful ones with special settings. In 2021, more and more routers support the distribution of Wi-Fi networks at 5 GHz. But the problem is that older receivers are only able to see the 802.11ac range. If this is your situation, then you will not be able to set up pairing of these devices.

How to fix error 106 on LG TV

To watch your favorite movies and shows online again, you will need to follow the steps in this order:

• restart the access point and equipment;
• delete the existing connection, and re-enter the password;
• place the TV closer to the network source.

If the problem is in the range of the chain, then make sure that you have support for 802.11ac and Wi-Fi at 5 GHz. If your model supports all of this, then check the parameters of the router. Go to settings, manually set channel 36, 40, 44, or 48, save this and restart the device.

If you have any questions or complaints. please let us know

If this is your first time turning on the TV and want to enter the basic initial presets, then follow the guide:

• point the remote control at the infrared port of the set-top box and press SETTINGS;
• presets for adjusting basic processes will appear on the screen;
• open the “Network” tab;
• there select “Network Connection”;
• then click on the big red button labeled “Adjust”;
• find the name of your router;
• write the password using the remote control and save;
• wait for the connection to complete and use.

If you change your password, you will have to repeat the procedure.

Error 106 on LG Smart TV when connected to Wi-Fi and the Internet: how to fix?

Error code 106 on LG Smart TV is a problem faced by owners of equipment of the same name. A similar glitch. the TV does not see the connection network and does not connect to home Wi-Fi. In many forums, this issue becomes a topic for thought. Users exchange information with each other. We suggest the main solutions in the article. Study the recommendations in detail to troubleshoot the failure. Following the steps will avoid a lot of difficulties.

Cause

The main reason is the TV does not support Wi-Fi. If this option is not available, the device will not see suggested networks. Other problems also play a role. One of them, the TV does not connect to the home internet. To check the quality of the connection, we recommend that you make sure that your home modem operates within its range. The problem can also be related to:

• temporary failure of the receiver, TV or router;
• technical work of the Smart Television server;
• interruptions in the provision of services by the provider;
• outdated firmware.

What error 106 means on LG Smart TV

Error 106 when connecting to the Internet on LG TV occurs when the TV does not “pick up” the Internet signal. In the device settings, a diagram of the connection between the body device and the modem is displayed. In addition, there are problems with connecting receivers of different frequency ranges. Some TV models do not have an adapted Wi-Fi router. This technique is either not at all adapted to wireless networks, or it is connected using a special USB cable.

How to fix error 106 on LG TV

To fix the problem, you need to enter the email address from Google in the special line. Open the “Settings” folder, then go to the “Network” section. In the window that opens, select “Connect to Wi-Fi”. Click on the “Change” line. We enter a special code and confirm the operation. We are waiting for the appearance of a new status.

Another situation is when equipment from LG is unstably connected via WI-Fi. There are constant interruptions, the speed does not correspond to the declared one, the network is temporarily lost. There is no definite solution. Each model has its own troubleshooting methods. The developers recommend rebooting the device or resetting the settings to the factory state. Be careful. Such actions destroy the given parameters. You will have to re-adjust the technique. Try to restore the work yourself. Alternatively, contact the service center for help. Operators will help you solve the problem online. Write a message or call the company’s hot line. Ask the desired question in the application. Use quick tips.

change the values ​​of the DNS address

Error 106 indicates an unstable connection, which may be the result of incorrectly selected DNS address settings. We recommend visiting certain sections of the settings and changing the values. To do this, you can use the following instruction:

• We tear off the settings by clicking on the corresponding button on the remote.
• Go to the “Network” section, and then go to the “Wi-Fi network connection” menu.
• Click on the line “Advanced settings”.

Click on the line “Advanced settings”

These simple manipulations allow you to fix error 106 on your LG TV.

checking function support

As silly as it sounds, some users are trying to turn on Wi-Fi on a TV that doesn’t even have a built-in module. Naturally, such attempts are unsuccessful. To check if your LG TV supports wireless connectivity, please refer to the following information:

• If the TV does not support Smart TV, then it cannot be connected to the Internet in any way. over, it does not matter at all how the connection is made: via a cable or an external module.
• The TV supports Smart TV, but it does not have a built-in Wi-Fi module. In this case, you can connect the device to the network via cable, or using a special device. a repeater.
• TV without built-in Wi-Fi module, but supporting the installation of an external receiver. As a rule, it is enough to insert a special Wi-Fi receiver into the USB connector of the device, and the error will disappear.

All information about a specific TV model can be found in the instructions, or on a specialized website on the Internet.

Error 106 on LG TV. How to fix it? Step-by-step instruction

Many owners of modern TVs are faced with errors related to the network connection. They can appear during Smart TV download, browser opening and video launching from the Internet. There are a lot of reasons due to which the problem appears, so there is no point in disassembling each of them. In this article, let’s take a look at error 106 on LG TV, which is accompanied by the text “Network not connected”. We recommend that you carefully follow from method to method until the failure completely disappears.

check the connection settings

Most modern routers support the distribution of the Internet at a frequency of 5 GHz, the same can be said about TVs in terms of signal reception. However, it is strongly recommended to check if the TV supports the selected frequency. If everything is in order and the error persists, then it is necessary to configure the router channels correctly. To do this, use the following instructions:

• Opening the router settings.
• Go to the section “Wireless mode”.
• Go to the “Wireless Settings” menu.
• In the “Channel” field, set one of the following values: 36, 40, 44 or 48.

Depending on the router model, the section names may differ, but the principle of action is the same everywhere.

How to fix the error?

It’s actually not difficult to fix the error that appears. You do not need any specific knowledge, skills and devices. Most often, the problem disappears after disabling or activating a certain option in the settings.

In summary, fixing error 106 on an LG TV is pretty easy. Most often, it is enough to set the correct DNS address settings and after that the problem will be solved by itself. But if none of the presented methods helped, then describe your problem in the Комментарии и мнения владельцев. We will try to answer and help you!

Error 105

The TV stopped connecting the network, complains: NAME_NOT_RESOLVED. We translate: the name is not recognized. The error is universal, known to PC users running Windows operating systems. Users claim: viruses / antiviruses are often the cause. programs that change the firewall settings.

• Reboot your router.
• Check the availability of an Internet connection with a phone, tablet, laptop, or stationary PC.
• Repetition of the error brings the location of the fault straight to the ISP. Or the router itself is hacked (KRACK). Perform a hard reset, call your ISP, inquire.
• Try to connect the TV directly, bypassing the router (TP-Link, D-Link).
• Or change the DNS address by substituting the resources Yandex (77.88.8.8, 77.88.8.1), Google (8.8.8.8).

Doesn’t work, refuses to catch. replace the Wi-Fi cord.

Types of malfunctions typical solutions

• Doesn’t connect.
• Wrong SSID selection, password entry:
• Visit the Network section of the menu, select the desired access point.
• Re-enter the security key.
• Refuses to see the router via Wi-Fi:
• Reboot your router.
• Perform a hardware reset of the router (Reset button), reconfigure.
• Install the latest firmware (router, TV). Consider the process below.
• Errors 105, 106
• An IP address assignment (DHCP) server has failed. Set your own IP, gateway (for example 192.168.1.1), DNS (8.8.8.8. Google).

Don’t expect too much by following the typical recommendations of the user guide. However, the list of actions will undoubtedly solve some problems.

Firmware upgrade

You can download the finished package, then plug the flash drive into the port. Or use the services online.

Hard reset the TV

• Turn off the machine.
• Open the system menu (read the user manual for more details).
• The option has a characteristic name like Reset.
• Set up the instrument again, paying close attention to the Smart section.

The TV does not connect to the Wi-Fi router

The Smart TV is a true family friend. Full citizen of the state. Will take care of children who love to drive cars, entertain household members on Sunday evening. 3D games will provide a complete illusion of reality. YouTube is full of utopian ideas that “prove” the virtuality of the planet Earth. Believe it or not. choose for yourself. The trouble is, if the TV does not see the router it remains to listen to nonsense.

Storage device

• Find the official website of the manufacturer.
• Find the firmware of the purchased TV model.
• The file usually contains the section Support, Download, Software, Download
• Select version.
• Download the file.
• Follow the rules for placing the archive according to the instructions. Sometimes you need to create specifically titled folders.
• Plug in the flash drive, start the update by selecting the appropriate menu item.

Beware of an unreliable power supply. Have a chance to destroy equipment.

Correct connection

We are sure that most of the readers know how, but here is the correct sequence of manipulations:

• Turn on your router. Make sure: there are no restrictions (frequency, protocol version, number of simultaneously served subscribers, unique SSID).
• Check network performance via cable or wireless Internet.
• Open the TV set menu.
• Find the Network section.
• Select a method (wireless connection).
• Mark the desired SSID.
• Enter the access key.
• Done!

Malfunction / missing wireless adapter

A module that allows you to connect to Wi-Fi is more often installed on the TV. Check additionally: “dongle” is visible from the outside, the indoor module is displayed in the built-in TV menu. Verification:

• Test the visibility of any other devices. Visit the Network section to check for nearby access points. Scrupulously conduct control using a mobile phone or PC. Check the list of names, excluding errors.
• Find the MAC address of your wireless adapter by visiting the Support section. The position of the information is determined by the firmware version by the manufacturer. For example, Samsung has added the “Contact” option. The presence of krakozyabr (zeros, dashes) implies a malfunction / absence of the module.