Error 4013 when restoring iPhone x

All effective ways to fix iTunes error 4005 4013 4014

When iTunes errors occur like mushrooms, you must feel crazy to deal with them. This page is about solutions to help you fix iTunes errors such as iTunes 4005, 4013 and 4014 errors.

When using iTunes on a Mac or Windows computer, you may encounter various iTunes errors, such as an error code or warning message. In fact, many iTunes users are facing some recurring problems such as iTunes Error 4005, iTunes Error 4014 and iTunes Error 4013.

iTunes errors may appear when you install iTunes or while running the software. In most cases, you try to restart or reinstall it to get rid of the problem. The bad thing is that these iTunes errors may come back from time to time. What you should do?

This post is mainly written to help you fix iTunes error 4005/4014/4013, If you are facing the same iTunes problem, you can use the following solutions to fix it.

How to fix error 4013 by yourself

Before contacting a service center, our Apple Lab experts recommend doing the following.

  • To do this, do a forced reboot. On iPhone 8 and later models press and quickly release the volume up button. Then press and quickly release volume down button. Then press and hold the side button until the Apple logo is displayed.
  • Connect the device to your PC or laptop. Find your phone in Finder or iTunes.
  • After appearing message suggesting to repair or update iPhone choose “Update”.

In addition, we recommend that you check your computer‘s software update, cable status. Very often error 4013 in iPhone appears because of a defective cord or problems with your computer. So try to use another cable and another PC for recovery. If none of the “home” methods have helped, or you are unable to try them all yourself, please contact the Apple Lab, we will solve any hardware and software iPhone problem.

How to fix iPhone error 4013 or iTunes error 4013

If you are an iPhone user, then you have encountered the message that “iPhone cannot be restored. Unknown error occurred (4013).At least from time to time. Actually, this is a very common error active on iOS devices and known as iPhone 4013 Error, Click to find the best solution if your iPhone fails to connect to this iPhone. No Value.”.

Error 4013 when restoring iPhone (iPad)

error, 4013, restoring, iphone

Today I’m going to talk about iPhone recovery error 4013. Despite what they write on apple’s website about error 9, 4005, 4013 or 4014 appearing when restoring an iOS device, this is almost 100 percent evidence of a hardware problem in the phone. The causes are usually found in a faulty or bad contact (soldered off) of the NAND memory chip, or Wi-Fi network module, or camera.

Most often similar problems are encountered with “bumpers” (devices that were dropped) or people drowned. As a result, the phone shuts down or goes into a cyclic restart, displaying the logo with the apple on the screen. If you are trying to repair your phone from DFU mode, first you get a message about waiting for your iPhone, after that the process aborts with 4013 or 4014 error. At first glance, it seems that nothing serious, because the phone turns on and seems to work, but it does not.

Failed iPhone repair. Unknown error (4013) occurred. How to fix?

Reprofitting process starts with diagnostics of all iPhone hardware components and if any of them are not responding, the process is aborted with error 4013 or 4014. With such errors I recommend you to go to the service, because the repair will require at least a soldering station and the appropriate skills.

However, you can try a very simple solution, available to everyone (in case you have nothing to lose and I can’t guarantee the result). Remember, I once wrote about how to reanimate the iPad with a red screen? But it really works, and often at services do it this way, only you will not know about it. But here is today’s shaitan way. is certainly the edge, though, and allows you to revive the device for a while. Try to put the iPhone in the freezer for 20-30 minutes and then try to reflash it immediately.

Of course it’s better to heat the chips with a soldering station, and ideally re-solder the NAND or Wi-Fi module (especially on iPhone 4S). often the impact “falls off” is the soldering, but the chip itself is still working. However, the heating and freezing. this is not a repair, this way we only temporarily restore the missing contact. Although, if you are lucky, the successful heating can restore the damaged soldering. So today I was able to safely bring back to life the iPhone 4S, which in addition to the memory, and the Wi-Fi did not work (but I had a soldering station).

  • First uninstall with UninstallTool with all the program roots. iTunes. Then download from Apple.The latest version of iTunes. Close iTunes. Then connect iPhone to PC, be sure to use original cable. Once it is detected by the system, open Device Manager and find your TA in the Apple Mobile Device list. and try to reinstall the driver from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
  • Download tinyumbrella and press the exit recovery button

This is all assuming that the hardware is okay.

iPhone 4013 signs

Sometimes error 4013 can be fixed by flashing or repairing iPhone. Often have to fix the problem at the hardware level.

The third way. restore via DFU mode

DFU Ulita is a special program designed to restore the functions of the iPhone. This mode should be used only in emergency cases, which is the appearance of code 4013. To restore the phone via DFU, you need to connect it to the PC, using a cord, and start iTunes. Then the device must be turned off completely. After the device is turned off, you need to follow a certain algorithm and enter DFU mode.

The procedure is as follows: Hold down the power button for 3 seconds, without releasing the power button, activate the home button. You need to hold down both keys for about 10 seconds, then the power key is released and the “Home” key is kept pressed until you see a window telling you that you need to restore the iPhone. The “Repair iPhone” function will be available in iTunes. You need to activate it and finish the recovery process.

Error 4013 while recovering iPhone

Popular websites advise to repair iOS, update iTunes, download new firmware to your iPhone, but all these actions probably will not lead to the functionality of your iPhone. Why? The answer is simple, the iPhone memory is like a “thumb drive”, it fails. Just remember how often your “flash drive” with coursework, old photos, important information breaks down?

Here too, the principle is the same, although more high-tech. In the manufacture of iPhone boards use modern components from reputable manufacturers Hynix, SanDisk, Toshiba, etc. But they also have problems. The service life is limited to 5 years (official information on the box with iPhone).

ERROR 4013,4014,09 iPhone X,XR,11.SOLVED

Let’s try to understand the causes of this error. The problem is that it is preceded by various symptoms of iPhone behavior.

  • iPhone often reboots;
  • A red screen appears at bootup;
  • iPhone hangs on loading and will not boot;
  • Apple” is displayed on the screen and nothing else happens;
  • NAND CRC ERROR is displayed in the firmware logs (about this ).

If the above symptoms occur on your device. do not panic. First of all it’s necessary to restore the software (iOS) in recovery mode.

Do this if you’re sure you have a backup or your data was previously synced to iCloud.

After entering Recovery mode, restore iPhone to factory settings. Select “Restore” in the box. If at the end of the firmware you get error 4013, the nand-flash memory problem is probably confirmed.

How to read iOS logs?

The software logs are in Settings. Privacy. Analysis. Analysis data. In these multiple logs you need to find the first one starting with “panic. Next fall into it and find the ill-fated inscription NAND CRC ERROR.

Read our article How to deal with it iPhone Flash memory is not working.

Restart your devices

The first solution that comes to mind if there are any glitches is to reboot. In most cases, software errors are temporary and when you completely reboot everything returns to working correctly. How to execute:

  • On 4s, 5s, SE, 6, 7, 8, X models, press Home and Top/Side button simultaneously;
  • Wait for slider to appear on screen and drag it down.

In models that do not have a big button for switching to the main menu and unlocking, you can use only the “Side button.