Do not cover the top of the huawei screen disable

Correcting the error “Do not close the top of the phone when unlocking

I changed the screen to Meizu M3s, turned it on and, when unlocking the screen, came out the message “Do not close the top of the phone when unlocking”. Naturally, I did not cover any part of the screen. Before replacing the monitor, there was no message. I began to find out the prerequisites for this error and how to correct them. Below I will share with you the methods that helped me overcome the problem and remove this message.

“Do not cover the top of the screen.” How to get rid of?

Each reason asks for its own approach. In case of contamination, you can gently wipe the sensor area.

If, as you think, a failure in the firmware became the prerequisite for the message, try simply rebooting the device or wait for the latest firmware version to be released.

The third prerequisite, the failure of the proximity sensor, will help you get rid of in the service center.

In the event that it was not possible for you to solve the problem with the occurrence of a notification, you can simply turn off the function of preventing accidental clicks. To disable this feature on Xiaomi devices:

1) go to “Settings” and go to the “Blocking and protection” section;

2) select the item “Advanced settings”;

3) turn off the ” mode” function.

Likewise, the function of preventing accidental clicks is disabled on phones of other brands, but the title of the function and its location may differ. You can quickly find a similar function on your own device by entering into the search options one of the following queries: “Lock the screen when the phone is in your “, “Lock the screen”, “Accidental taps”, “Prevent accidental operations”, “Automatic lock in your “. ” mode”.

As you can see, the names of this function can be very different, but by disabling it, you will no longer be faced with the message: “Do not close the top of the screen”.

Reasons for the message “Do not cover the top of the phone when unlocking”

In total, I have identified four main reasons:

  • Defective proximity sensor
  • Proximity sensor hole dirty
  • Mismatch of the hole for the sensor with the sensor itself
  • Long distance from sensor to display

Do not cover the top of the screen

Quite often, phone users are faced with a message: “Do not cover the top of the screen” or “Do not cover the speaker area.” Traditionally, such messages appear on Xiaomi and Huawei devices.

At the beginning, you need to understand what the occurrence of similar notifications is connected with. And it is connected with the work of the function of preventing accidental clicks. In other words, when the proximity sensor of your device does not detect any free space in front of it, the screen of your phone is locked and a message appears on it: “Do not cover the top of the screen.”.

We invite you to subscribe to our YouTube channel so as not to miss the latest videos

This feature helps to prevent accidental unlocking of the phone when, for example, it is in a. and thus protects the device from accidental presses. Thus, by covering the proximity sensor (top of the screen) with something, you will see one of the above messages.

However, it happens that such notifications appear on the screen when there is no reason for this, that is, when the proximity sensor does not cover anything. The reasons for this may be: contamination in the area of ​​the proximity sensor, a failure in the firmware, failure or incorrect operation of the proximity sensor.

How to fix

If in the case of a faulty sensor we cannot do anything on our own, then overcoming the rest of the prerequisites is completely realistic.

  • In order to make sure that the proximity sensor is working, it is enough to point the camera of another phone at it. When the sensor is working, you will see the LED blinking through the camera. They are invisible to the naked eye.
  • Examine the hole for the proximity sensor. Is it dirty. The glued protective glass can also lead to dilemmas if it is glued directly to the sensor hole.
  • Go to Settings = Accessibility and tap “Calibrate Proximity Sensor”. After successful calibration, a corresponding message will be displayed. Reboot your device and check if the error occurs. This helped me specifically.
  • If past solutions did not give the desired result, you can try the method from the video below. It also indicates how to configure the proximity sensor, but not through options, but through the engineering menu.
  • Do not cover the top of the screen

    Quite often, smartphone users are faced with a message: “Do not cover the top of the screen” or “Do not cover the speaker area.” Usually such messages appear on Xiaomi and Huawei devices.

    First, you need to understand what is the reason for the appearance of such notifications. And it is connected with the work of the function of preventing accidental clicks. In other words, when the proximity sensor of your device does not detect free space in front of it, the screen of your smartphone is locked and a message appears on it: “Do not cover the top of the screen.”.

    Read more:  How To Block A Number On A Huawei Phone

    This function helps to prevent accidental unlocking of the smartphone when, for example, it is in your. and thus protects the device from accidental clicks. Thus, by covering the proximity sensor (top of the screen) with something, you will see one of the above messages.

    However, it happens that such notifications appear on the screen when there is no reason for this, that is, when the proximity sensor is not covering anything. The reasons for this may be: contamination in the area of ​​the proximity sensor, a failure in the firmware, failure or incorrect operation of the proximity sensor.

    “Do not cover the top of the screen.” How to get rid of?

    Each reason requires a different approach. In case of dirt, you can gently wipe the sensor area.

    If, as you think, the error in the firmware became the reason for the message, try simply restarting the device or wait for the new firmware version to be released.

    The third reason, the failure of the proximity sensor, will help you get rid of in the service center.

    In case you were unable to solve the problem with the notification appearing, you can simply turn off the function of preventing accidental clicks. To disable this feature on Xiaomi devices:

    1) go to “Settings” and go to the “Blocking and protection” section;

    2) select the item “Advanced settings”;

    3) turn off the ” mode” function.

    Likewise, the function of preventing accidental clicks is disabled on smartphones of other brands, however, the name of the function and its location may differ. You can quickly find a similar function on your device by entering one of the following queries into the settings search: “Lock the screen when the phone is in your “, “Lock the screen”, “Accidental taps”, “Prevent accidental operations”, “Automatic lock in your “. ” mode”.

    As you can see, the names of this function can be very different, but by disabling it, you will no longer encounter the message: “Do not close the top of the screen”.

    “Do not cover the top of the screenHuawei Honor. what is it and how to disable

    “Do not cover the top of the screen” is a warning that users often see on their Honor smartphone. In this article, we will look at what the presented alert means, and why it appears.

    Why you can’t close the top of the screen

    The warning that you do not need to cover the front camera usually appears when watching a video or while talking on the phone. This function is responsible for unexpected clicks on the display and blocks it.

    If the user closes the upper area, the system will ask you to remove the interference that interferes with the normal operation of the sensor. If the notification does not appear, then Android has not found any good reason to turn off the screen.

    But, sometimes users claim that they did not cover the front camera, and the phone still showed an alert. This indicates a malfunction of the function or a breakdown of the part, then the help of a service specialist will be required.

    What is “Lock screen, do not cover the top of the screen”?

    Today, existing phone manufacturers are trying to outperform their competitors, which is why they are developing more advanced models to create the most comfortable use of the device. Thus, various sensors began to be built into smartphones.

    If you block the top proximity sensor on the front camera near the speaker, the screen will dim and the phone will lock. This function is available in all modern devices, it turns on automatically when you have a telephone conversation or listening to an audio recording.

    As soon as the user puts his mobile phone to his ear, the display will immediately lock, which will help to avoid accidental clicks. If you take the phone away from your face, the screen will turn back on. Also, the proximity sensor is triggered in other situations. For example, if the user forgets to turn off the display and puts the smartphone in his

    Despite the usefulness of the function in question, it can sometimes appear erroneously on the smartphone display, which is already a problem. Hence, many users have a question related to disabling the inscription “Do not cover the top of the screen” Huawei. Usually, the reason for the accidental triggering of the sensor are:

    • Proximity module malfunction.
    • The sensor is dirty.
    • The upper part of the screen is covered with a cover.
    • Poor quality protective glass.

    Some reasons require service repair, while others lend themselves to self-elimination.

    How to disable do not cover the top of the Honor Huawei screen

    Disable “Do not close the top of the screen” on Huawei is possible through the settings of the smartphone. The manufacturer took this opportunity into account. In fact, you have to deactivate the display lock function, but then at the time of calls you will have to turn off the display manually. Unlocking instructions:

    • Go to parameters.
    • Find the “Manage” tab.
    • Then select “”.
    • Click on the section with the screen lock and drag the slider to the Off position.

    To return the notification back, also go to settings and enable the function.

    If you have any questions or complaints. let us know

    What to do if all else fails

    In the event of a hardware malfunction, it remains to contact the service center for help. Device may need to be replaced.

    From time to time, Huawei Honor users are confronted with the inscription on the display “do not cover the top of the screen”. The reasons can be different, as well as the ways to solve them. The most popular methods of 2019 will be discussed in the article below.

    How to disable “Do not close the top of the screen” Honor Huawei

    The manufacturer has taken care of those who want to disable “do not cover the top of the screen” on Huawei. In fact, this is disabling the screen lock during a call. Therefore, for those who nevertheless decided to take this step, it is recommended to communicate through a headset or to block the display manually when making calls.

    Step-by-step instructions for disabling the problem label are as follows:

    • select the “Settings” menu;
    • in the list you need to find and open “Management”;
    • then click “”;
    • in the “Screen lock” item, switch the button to inactive mode, that is, turn off.

    The issue is resolved quickly enough, and if necessary, it is possible to restore the functionality of the function. Removing the inscription is not difficult, while the phone will continue to work in full.

    Do not cover the top of the screen. In a competitive environment, smartphone manufacturers are trying to conquer the consumer audience, striving to provide the most comfortable conditions for using their devices. It is for this purpose that the developers came up with a screen lock mode and installed a proximity sensor on the front panel. It would seem to be a very useful function: the sensor reacts to objects in the immediate vicinity of the screen of the device and locks it, preventing accidental clicks. That is, when the smartphone is, for example, in the user’s. the risk of giving an unplanned command when touched is minimized.

    Read more:  Samsung 920nw Goes Off Lg Screen Backlight

    However, not everyone liked this feature. Some users complain about a spontaneous, as it seems to them, screen lock and are wondering if it can be turned off. Huawei technical support to the question “How to disable the screen lock?” answers as follows:

    At the same time, the blocking can be caused by the fact that the user closes the sensors necessary for operation in the upper part of the smartphone and as a result the following warning appears: “Do not cover the upper part of the screen.” If you are sure you are not covering them, it is worth making sure that the top bezel is free of any debris causing the proximity sensor to malfunction. Have you noticed the contamination? Wipe your smartphone, carefully remove small particles of debris from the technological holes. Chances are high that the sensor will return to normal after cleaning.

    “Do not cover the top of the screen” is a warning that users often see on their Honor smartphone. In this article, we will look at what the presented alert means, and why it appears.

    What is “Lock screen, do not cover the top of the screen”?

    Today, existing phone manufacturers are trying to outperform their competitors, which is why they are developing more advanced models to create the most comfortable use of the device. Thus, various sensors began to be built into smartphones.

    How to Solve Do Not Cover The Top Of The Screen Issue || Huawei ||

    If you block the top proximity sensor on the front camera near the speaker, the screen will dim and the phone will lock. This function is available in all modern devices, it turns on automatically when you have a telephone conversation or listening to an audio recording.

    As soon as the user puts his mobile phone to his ear, the display will immediately lock, which will help to avoid accidental clicks. If you take the phone away from your face, the screen will turn back on. Also, the proximity sensor is triggered in other situations. For example, if the user forgets to turn off the display and puts the smartphone in his

    Despite the usefulness of the function in question, it can sometimes appear erroneously on the smartphone display, which is already a problem. Hence, many users have a question related to disabling the inscription “Do not cover the top of the screen” Huawei. Usually, the reason for the accidental triggering of the sensor are:

    • Proximity module malfunction.
    • The sensor is dirty.
    • The upper part of the screen is covered with a cover.
    • Poor quality protective glass.

    Some reasons require service repair, while others lend themselves to self-elimination.

    cover, huawei, screen, disable

    Why you can’t close the top of the screen

    The warning that you do not need to cover the front camera usually appears when watching a video or while talking on the phone. This function is responsible for unexpected clicks on the display and blocks it.

    Why the camera does not work on Huawei and Honor phones: reasons and what to do?

    If the user closes the upper area, the system will ask you to remove the interference that interferes with the normal operation of the sensor. If the notification does not appear, then Android has not found any good reason to turn off the screen.

    But, sometimes users claim that they did not cover the front camera, and the phone still showed an alert. This indicates a malfunction of the function or a breakdown of the part, then the help of a service specialist will be required.

    Reasons for the message “Do not cover the top of the phone when unlocking

    In total, I have identified four main reasons:

    • Defective proximity sensor
    • Proximity sensor hole dirty
    • Mismatch of the hole for the sensor with the sensor itself
    • Long distance from sensor to display

    Proximity sensor malfunctions

    This sensor allows you to lock the smartphone screen during a call. It also prevents accidental activation when the device is in a bag or There are 4 reasons for this notification:

    • Hardware failure. disruption of the operating system caused by a virus, installation of a non-optimized OS update.
    • Mechanical damage, e.g. after a strong impact.
    • The sensor area is dirty (fingerprints, dust under the case).
    • The sensor is covered with a protective film, glass, cover.

    How to turn off the “Do not cover the top of the screen” notification

    • Go to “Settings”.
    • Open “Management”.
    • Disable Accidental Operation Prevention.

    If that doesn’t work, turn off the notification:

    • Run “Management”.
    • In the bottom menu, open
    • Turn the toggle switch next to “Screen lock” to the off state.

    Note! If you disable this feature, the screen will remain active during a call, so manually lock the display by pressing the power button.

    The third way is to access the Developers menu:

    • Visit “Settings”.
    • Select “About device”.
    • In the window that opens, click on “Build number”.
    • The “You have become a developer” window will appear.
    • Go to “Settings”, go to “For Developers”.
    • Depending on the version of the operating system, there will be “Proximity Sensor Calibration”.
    • Before starting the setup, put the Honor 10 in an open area so that it is not obstructed by foreign objects.

    If none of the above methods helped, wipe the area of ​​the light sensor from clogging. Then take another phone, connect the camera and point it to the range of the device. being functional, it will blink, which is invisible to the human eye.

    How to turn off the “Do not cover the top of the screen” notification

    • Go to “Settings”.
    • Open “Management”.
    • Disable Accidental Operation Prevention.

    If that doesn’t work, turn off the notification:

    • Run “Management”.
    • In the bottom menu, open
    • Turn the toggle switch next to “Screen lock” to the off state.

    Note! If you disable this feature, the screen will remain active during a call, so manually lock the display by pressing the power button.

    The third way is to access the Developers menu:

    • Visit “Settings”.
    • Select “About device”.
    • In the window that opens, click on “Build number”.
    • The “You have become a developer” window will appear.
    • Go to “Settings”, go to “For Developers”.
    • Depending on the version of the operating system, there will be “Proximity Sensor Calibration”.
    • Before starting the setup, put the Honor 10 in an open area so that it is not obstructed by foreign objects.

    If none of the above methods helped, wipe the area of ​​the light sensor from clogging. Then take another phone, connect the camera and point it to the range of the device. being functional, it will blink, which is invisible to the human eye.

    Proximity sensor malfunctions

    This sensor allows you to lock the smartphone screen during a call. It also prevents accidental activation when the device is in a bag or There are 4 reasons for this notification:

    • Hardware failure. disruption of the operating system caused by a virus, installation of a non-optimized OS update.
    • Mechanical damage, e.g. after a strong impact.
    • The sensor area is dirty (fingerprints, dust under the case).
    • The sensor is covered with a protective film, glass, cover.
    Read more:  Samsung Galaxy J3 Screen Replacement

    What to do if all else fails

    In the event of a hardware malfunction, it remains to contact the service center for help. Device may need to be replaced.

    What can be cooked from squid: quick and tasty

    Today we will analyze a small problem, which is that the following message is displayed: “do not cover the top of the screen.” Immediately, we note that the whole problem lies in the proximity sensor. Here he is, the hero of the occasion. As you understand, this sensor is installed on the front panel of your smartphone or tablet. It is necessary to prevent false alarms for accidental touches. However, some users lose their temper because of this functionality, since the screen, in their opinion, locks spontaneously when needed and when it is completely unnecessary.

    Reason one

    First, check to see if the speaker area is covered by a case or some other accessory. Also, the reason may be a malfunction of the proximity sensor itself. In this case, you cannot avoid contacting the specialists of the Xiaomi service center.

    Sorting desktops

    Use three fingers to pinch the home screen from either side towards the center and the default home screen selection window will open. Click on the house icon and the desktop will be set by default and will always open first. Here you can also add new pages to the home screen by clicking The order of the desktops can be changed by simply dragging and dropping.

    Redmi 3S

    4100mAh high capacity battery, unimaginably beautiful sparkling metal body

    Optimization always means pleasant surprises. It’s hard to believe that the new Redmi 3S is equipped with a high-performance Qualcomm Snapdragon 430 processor, a 4100mAh high-capacity battery, an attractive all-metal body, a 13MP camera with support for phase focusing technology. Even more impressive is that although it is only 0.9mm thinner than the previous generation smartphones (8.50mm thick), the 5-inch Redmi 3S fits very comfortably in the hand and feels good to the touch.

    Redmi 3S is lightweight, beautiful and very comfortable as we strongly believed in the possibility of improving its properties and used modernized technologies. “A missed opportunity, like youth, will never come back.” this is the motto that drives us to new heights. May the whole world.

    “Do not block the orange area of ​​the screen” on Xiaomi Redmi 3 | 3s how to remove?

    When you call, such an inscription appears. “Do not block the orange area of ​​the screen.” To disable this function, press Back and Volume at the same time and the screen dims / dies. What’s this? How to remove? On Xiaomi / Xiaomi Redmi 3, 3s, Note 3 Pro (Redmi 3 | 3s | Note 3 Pro).

    A similar problem with a pop-up warning not to cover the orange area of ​​the screen on Xiaomi smartphones occurs due to the fact that the “Prevent accidental clicks” option is enabled.

    To prevent this from popping up and bothering you anymore, you need to disable this option (move the slider to inactive mode).

    Go down a little and go to the “Lock screen and fingerprint” section and see that the Prevention of accidental clicks is activated:

    XiaomiRedmiorange. World trends news May 2018.

    The main purpose of a smartphone screen lock is to protect a mobile device from unauthorized access by unauthorized persons to control the device and to information stored on the device. This is a very useful and important function.

    Usually a smartphone, if it does not play video or music, lies on its own with the screen off and does not show any signs of vigorous activity. Therefore, taking it in hand, first of all, they press the power button: if it was turned off before, then it turns on, and if it was in standby mode, the lock screen lights up. The lock screen (the second name is the “Lock Journal”) is a picture with a beautiful photo, which, as a rule, does not have control icons or applications.

    What to do to get rid of the error

    It is easy to get rid of the error in Xiaomi Redmi of different generations. You just need to deactivate the auxiliary functions.

    To do this, on models without a scanner, you will need:

    cover, huawei, screen, disable

    Huawei u29 Do not cover the top of the screen (problem solve)

    If you follow all the steps, the problem will be resolved. In order for the error to disappear and never appear again, it is recommended to restart the smartphone after completing the above steps.

    To turn off the function in new models, you will need:

    If the described actions do not help in any way, then the reason lies in the proximity sensor itself. It may be defective or simply covered by a cover-book or protective glass. It will not be superfluous to remove the cover or protective film from the Xiaomi display. This will most likely help completely eliminate the appearance of the error.

    If you get the message “Do not cover the Xiaomi speaker area”, it is most likely that the function “Prevention of accidental clicks” or “In ” is activated. There is also the possibility that the proximity sensor on the top of the phone is blocked for some reason. Let’s figure out what is the matter and how to solve this problem.

    How to disable screen lock

    As you may have guessed, this feature can be turned off. For example, on Huawei smartphones this is done as follows: “Settings”. “Control”. “”. the item “Screen lock” (disable).But that’s not all, because the problem may lie in the user himself, who closes the sensors necessary for work in the upper part. Actually, this is why this warning appears. If you are EXACTLY sure that you are not covering the sensor with your hands or with something else, then check for any dirt at the top of the front panel (sometimes the sensor is located under the screen, often in frameless smartphones). Due to dirt, the sensor may not work correctly, so do a little “cleaning” and the problem will disappear. Now you know how to fix the problem with the message “do not cover the top of the screen”.

    Do you want to know how to disable the “Do not cover the speaker area” error on Xiaomi? Then read to the end, and the veil of secrecy will be thrown off.