DIY stand with your own hands open. How to make a test stand \ Open body for PC with your own hands

Open stand for PC with your own hands

Purchase mobile exhibition products: folding collapsible stands and posters, presentation racks, tables for laying out booklets, business cards and other printed products of advertising.

Buy prefabricated information designs: pop-up, click, Fold-up, Roll-Up. We provide customers with a large selection of finished products: on sale products are presented with a typical design of standard dimensions. You can also order shields according to your own requirements: the necessary form of the product, functionality, size, design and other characteristics.

Buy folding stands to order (in and throughout the type of joker. These are branded designers folding in the presentation site. The wide variability of the assembly will allow you to create an advertising object of the required dimensions in the most compressed time. Farms are used both in rooms and in street conditions.

Purchase stationary advertising and presentation products for premises. We offer the manufacture of stands to order, booklets, reception, floor and wall-mounted information shields.

Use the services of large.format interior printing and lamination (technical requirements for the preparation of files are posted in the corresponding section).

Rent the necessary pos-materials. We provide collapsible advertising mobile stands for rent at affordable with software and region (our specialists will bring and install the product in the required area, guaranteeing the reliability of fasteners and ease of operation).

New advertising equipment is supplied with a guarantee sheet and assembly instructions. To familiarize yourself with the detailed price list and the possibility of obtaining discounts, contact us a convenient way for you.

BP standing stand, first version.

It was evening, there was nothing. The idea to build this stand has appeared for a long time. While the pieces of iron arrived, adapters, while the time appeared The review will not be complete and not correct, but which is.

It comes in a conventional box, with instructions.

What can? Operating Voltage: AC230V (EU) Max Operating Current: 16A Current Range: 0.01a-19.999a Power Range: 1W-3680W Indication of Frequency: 46hz-65hz Measurement of Consumption: 0.00kwh to 9999.99kwh Duration of Indication: Up To 9.999 Hours 59 Minutes Item Size: 12 6.3 7.5cm / 4.72 2.48 2.95in item Weight: 150g

Will be used to determine the consumption of the power of the studied PSU.

The main element of the stand: ammeter Juntek DC 0.01-100v 0.1-300A 40

It comes in a conventional box, everything is neatly wrapped in several layers of pimp.

Has just a wild volume of functions, but I, of course, will not use them. I need an exclusively ammeter. Characteristics

Characteristics: Material: plastic ABS! Model type: VAT-4300 voltage measurement range: 0.1-400 V permission for voltage: 0.1 to accuracy at the output: ± 2% 3 words current measurement range: 0.1-300A Current resolution: 0.1a accuracy: ± 5% 10 words! Temperature measurement range:.20 ℃.120 ℃ Power measurement range: 0-200KW power resolution: 0.001 W range of power: 0%.100%! Ampper-hour measurement range: 0-2000 kA resolution of the capacity: 0.001ah watt-hour measurement range: 0-4000kwh watt-hour resolution: 0.001wh time measurement range: 0-99 days! Resolution time: 1 second of the address of addresses for communication: 01-99 The range of wireless channel settings: AZ (26 channels)! NCP: 0.1-300A (negative settings of protection against current overload) OCP: 0.1-300A (positive configuration from current overload) OVP: 0.01-400 V (setting protection against overvoltage) LVP: 0.01-400 V (configuration of protection against low voltage)! Display: 1.8-inch TFT-ZHK display protection against time delays: 0-10S Module Measuring power consumption: about 0.4 W Module display consumption power: 0.5 W segain 10 meters meters meter: USB DC 5V or DC 10-30V Module of the Block Measurement Module: DC 12V Length of the USB cable: 1m!!

10a is not enough for the dough, I will refuse ammeter function. Voltage only for control 5V lines, to control the drawdown. It was necessary to take two, another 12V fishing line for a trimmer.

I thought for a long time about the correct connection to the circuit. At the exit I received: 2 upper pine is responsible for the power of the device itself. 3 Pina to take readings.

For use as a voltmeter, we beg red with red, black with a black and on the on-board network (subject to 4.5-30V) to relieve current strength, the blue wire clings to the minus of the load into the gap between the power supply and the load.

It all started with paper, for a long time and stubbornly tried to imagine a panel with devices, and then organize competent wiring. In practical performance it turned out approximately similar.

I began implementation with the search for a similar building in the basement of parents, which contains many mysteries.

There was a corps and a muzzle for it, after long preparations it turned out such a freak.

On the back of the prototype, this is such a quiet horror.

There were many fears, the wires are thin, the currents are planned large. The Chinese with Ali let down, one justification failed and sent only one adapter, the other parcel was lost. There were plans, divided the input power into 3-4 connectors, at least somehow compensate the thin wires. Total, I only have mom 6 pin and 8 pin. Problems climbed, BP Uhril for short and cut down. Why? Then I saw it (after searching in Google)

The connectors are different, be careful and do not repeat my mistakes.

Physically the same connectors 8 pin are diametrically opposite in the electrical part. But I thought where I sinned during the assembly: after all, I get a short circuit.

Shunt for the power part surprised me in size.

I cook according to the instructions for connecting in the gap of the submitted chain.

Here I made a mistake and did not use the external power for this block (GND and Vext connectors)

The main part of the load is the halogen bulbs of 35W each (10 pieces)

Установил в клеммные колодки, изолировал синей изолентой пластиковая проставка между ними.

Additional lamp for Over Load at 40W

Total: The load in theory is 350 190 40 = 580 watts, which will require up to 48a for 12V. I treated this relatively normal, but such numbers were horrified by such numbers.

When assembling I made an error, I wanted to put the lamps sequentially. After the first 10090, the current was no longer enough to light a dozen 35 watt.

Open stand for PC. Castle building.

If you like to experiment with computer iron, then an open stand for PC is a great idea how to assemble PC. All components are in sight. And such a custom case looks very unusual and will pleasantly surprise your friends. And how to make an open stand, you will learn from this video. The link to the model is below. You can also provide little assistance in the development of the channel, at the following link. Link to the model: Link to the help of channel development: #Open.stand.up #Caste Corpusapk #Computer Store = I recommend that you also see: button for an open stand modding PC, RGB instead of plugs of idea for 3D print. A tripod for the phone. How to shoot on a smartphone. Phone stand =

We make an open stand from the old PC case (moding :-))

Chargonal from the old beaten.up stand opened. And not bad also happened. In any case, I am satisfied with the result.) Link to cooler. Return up to 12% from any purchase for Aliexpress using cashback. Registration by link: also supports many other online stores of the CIS countries.

Homemade test stand for maternal boards

I think that sooner or later everyone who regularly picks up the computer iron comes to somehow optimize the workplace-bothers each time to lay out on the table, then get. Plus, sometimes fuss with a mother can go for several days, and during this time you may need to do something else on the table, start something else, etc.P. And if a motherboard is laid out there, and even some tests go, then moving it can be undesirable. So the classic “box for the motherboard” ceases to arrange. This came to me sooner than early, but it is better than ever

At first, of course, I went to watch ready.made options. They are, but are quite expensive, even Chinese. The average price is 100, it is cheaper, it is more expensive.

Alpha-DB6 CASE. In principle, not such an expensive option, if the delivery is not taken into account. One.story with a “basement” for disks.

BC1 Open Benchtable (in general, this is a rather interesting project and there are drawings for independent manufacture on the site).

X-Frame 2.0. I don’t know what they ask for that kind of money for.

Test Bench v1.0. Only functionality, what is here, that the option has higher.

Qdiy PC-D60. Chinese version. Naked base for the motherboard, only MATX and less, the BP is placed on the side, there are no places under the optical drive.

I consulted with a toad and decided that I would not buy anything. We must do it yourself. I looked at what the Internet can advise on this topic. The Internet advised a lot of things, I did not want this to the first.

General ideas. a bunk design, on the lower “floor” there is a power supply and information carriers, on the upper. motherboard. There are single.tier options when BP and discs are located next to the mother, but they occupy more space on the table.

Most make a stand from the old case. take out a pallet for the motherboard, make a frame from the remains of the case, then the pallet is fixed on top.

• I have crooked hands. The mouse and keyboard in them are much better than a hammer and a hacksaw. That is, I can dig, I can not dig. I can saw it, I can not saw. But somehow it is beautiful to saw-this is not to me anymore. Because the less you have to cut, drill, etc.P all the better.
• I will work with what is lying at hand and underfoot. To save and not to walk.
• The design should be two.tier. compact, neat. usually BP and information carriers are used the same, only motherboards and expansion boards change. So it’s easier to fix the PSU and the wheels to constant. or make comfortable seats for them so that you can quickly put and remove. Sows should be at least 3.5 ″ hard drive and optical drive. Optionally. 2.5 ″ disk and 3.5 ″ Disciper.
• There should be buttons of turning on and rebooting, speaker, power indicators and hard disk operation.
• It should be convenient to move the assembled design. nothing should stick out for dimensions, except for external cables, there should be places for which it is convenient to take.

For fastening, the motherboard twisted the pallet from the old case. It would be possible to install fasteners directly on the base of the stand, but this is an extra work. everything is already marked on the pallet of the standard sizes of the motherboard, it is much easier to screw it with four screws to the base than to put a dozen racks under different types of motherboards. The pallet from old Invina would be ideal (A-Series, in my opinion, the early ATH, where the tray on the rails, together with the motherboard, moved out of the corps). But, unfortunately, I did not have this at hand. Yes, and it would be a pity to saw a good body. And so I used some kind of cerebral can like a superpover.

The dimensions of the stand chose based on the size of the pallet. threw a couple of centimeters on each side, somewhat rounded. it turned out 30×40 cm. The height is equal to the height of the power supply, set vertically. 15 cm.

Then I was somewhat confused. I did not do it myself, but went to the locksmiths and carpenters and said “I need such crap”. As a result, after a couple of weeks (they were busy, but I didn’t burn) received the ordered horseradish.

Two pieces of wood-bruise, legs made of metal tubes. I myself would most likely do the legs of wooden ones. I would take a pen of a mop and drank four pieces of the desired length, then I would put on long screws.

The power supply was thinking how to put it. vertically or horizontally, as a result I put it horizontally. All the same, the length of the processor power cable was not enough that is so, and the rest of the wires was more convenient to use with a horizontal location of the BP. BP is fixed just on two corners. The power supply itself is the usual five hundred. Of course, it would be ideal to put a PSU here with disconnected wires, but what I used like a bench BP, I stuck it.

To attach optical drives and disks, I took a rack from another old case, is convenient in that it has a couple of stops for a hard drive and it is not necessary to screw it for reliable fastening. But the drive must be fixed.

Homemade test stand for maternal boards

I think that sooner or later everyone who regularly picks up the computer iron comes to somehow optimize the workplace-bothers each time to lay out on the table, then get. Plus, sometimes fuss with a mother can go for several days, and during this time you may need to do something else on the table, start something else, etc.P. And if a motherboard is laid out there, and even some tests go, then moving it can be undesirable. So the classic “box for the motherboard” ceases to arrange. This came to me sooner than early, but it is better than ever

At first, of course, I went to watch ready.made options. They are, but are quite expensive, even Chinese. The average price is 100, it is cheaper, it is more expensive.

Alpha-DB6 CASE. In principle, not such an expensive option, if the delivery is not taken into account. One.story with a “basement” for disks.

BC1 Open Benchtable (in general, this is a rather interesting project and there are drawings for independent manufacture on the site).

X-Frame 2.0. I don’t know what they ask for that kind of money for.

Test Bench v1.0. Only functionality, what is here, that the option has higher.

Qdiy PC-D60. Chinese version. Naked base for the motherboard, only MATX and less, the BP is placed on the side, there are no places under the optical drive.

I consulted with a toad and decided that I would not buy anything. We must do it yourself. I looked at what the Internet can advise on this topic. The Internet advised a lot of things, I did not want this to the first.

General ideas. a bunk design, on the lower “floor” there is a power supply and information carriers, on the upper. motherboard. There are single.tier options when BP and discs are located next to the mother, but they occupy more space on the table.

Most make a stand from the old case. take out a pallet for the motherboard, make a frame from the remains of the case, then the pallet is fixed on top.

• I have crooked hands. The mouse and keyboard in them are much better than a hammer and a hacksaw. That is, I can dig, I can not dig. I can saw it, I can not saw. But somehow it is beautiful to saw-this is not to me anymore. Because the less you have to cut, drill, etc.P all the better.
• I will work with what is lying at hand and underfoot. To save and not to walk.
• The design should be two.tier. compact, neat. usually BP and information carriers are used the same, only motherboards and expansion boards change. So it’s easier to fix the PSU and the wheels to constant. or make comfortable seats for them so that you can quickly put and remove. Sows should be at least 3.5 ″ hard drive and optical drive. Optionally. 2.5 ″ disk and 3.5 ″ Disciper.
• There should be buttons of turning on and rebooting, speaker, power indicators and hard disk operation.
• It should be convenient to move the assembled design. nothing should stick out for dimensions, except for external cables, there should be places for which it is convenient to take.

For fastening, the motherboard twisted the pallet from the old case. It would be possible to install fasteners directly on the base of the stand, but this is an extra work. everything is already marked on the pallet of the standard sizes of the motherboard, it is much easier to screw it with four screws to the base than to put a dozen racks under different types of motherboards. The pallet from old Invina would be ideal (A-Series, in my opinion, the early ATH, where the tray on the rails, together with the motherboard, moved out of the corps). But, unfortunately, I did not have this at hand. Yes, and it would be a pity to saw a good body. And so I used some kind of cerebral can like a superpover.

The dimensions of the stand chose based on the size of the pallet. threw a couple of centimeters on each side, somewhat rounded. it turned out 30×40 cm. The height is equal to the height of the power supply, set vertically. 15 cm.

Then I was somewhat confused. I did not do it myself, but went to the locksmiths and carpenters and said “I need such crap”. As a result, after a couple of weeks (they were busy, but I didn’t burn) received the ordered horseradish.

Two pieces of wood-bruise, legs made of metal tubes. I myself would most likely do the legs of wooden ones. I would take a pen of a mop and drank four pieces of the desired length, then I would put on long screws.

The power supply was thinking how to put it. vertically or horizontally, as a result I put it horizontally. All the same, the length of the processor power cable was not enough that is so, and the rest of the wires was more convenient to use with a horizontal location of the BP. BP is fixed just on two corners. The power supply itself is the usual five hundred. Of course, it would be ideal to put a PSU here with disconnected wires, but what I used like a bench BP, I stuck it.

To attach optical drives and disks, I took a rack from another old case, is convenient in that it has a couple of stops for a hard drive and it is not necessary to screw it for reliable fastening. But the drive must be fixed.

Open test stand for PC with your own hands.

I often test different iron and to speed up the process I needed a test stand. Without thinking twice, I decided to make it with my own hands, and I captured the whole process on the video. For those who are interested in, pleasant viewing!

Brother) I always cut it like that, I can’t do anything, a hacksaw / lobe \ hand.saw, acrylic \ metal \ wood, even if everything is smooth. It turns out crookedly, do not take it in mind)

Hello, I am very defended by your videos, but such buildings do not come out, I would be glad if you gave me 1 building that you did, I will be very happy for you, you are the best

And if you still make a cabinet metal, sealed and put a stand in it, then there will be no dust on it.

And Misiee knows a lot about perversions))) it was necessary to cook from 5 at once)) and would not have to bend))) cut and cooked. Listoga checked, cool!

Just Came Across Your Channel and I Like Your Content and Subscribed.

Hi, this is Peter from NTD Television.Your videos are great!Our mission is to exalt the world, sharing truth, hope and humanity. We would like to download your content to our media pages.Can we get your permission for this?Thanks.

What about making one to order? Interesting cost.I would have done it myself, there is no tool.

use so Socket 423 of which there is little left, blasphemy!

I give advice on channel promotion1) replace the channel icon from Narison with the image of a transistor2) on the main background, too, change

that you would not suffer a garbage with an angular grinder when cutting, make a desktop circular, it is very convenient, cut even, the dimensions do not dance) the disk is naturally from the angular grinder for iron to put it) the edge of the sheet is squeezing it in a vise (if it does not climb into the leafgai) so even) it turns out) a stroke of cooplactone can be replaced with any tube (for example from a system or larger diameter) cutting it along one side.

Class current try a better microphone pliz vine voted norms, but the sound is stuttering as if I were aiming on the phone

Open test stand for PC with your own hands.

I often test different iron and to speed up the process I needed a test stand. Without thinking twice, I decided to make it with my own hands, and I captured the whole process on the video. For those who are interested in, pleasant viewing!

Brother) I always cut it like that, I can’t do anything, a hacksaw / lobe \ hand.saw, acrylic \ metal \ wood, even if everything is smooth. It turns out crookedly, do not take it in mind)

Hello, I am very defended by your videos, but such buildings do not come out, I would be glad if you gave me 1 building that you did, I will be very happy for you, you are the best

And if you still make a cabinet metal, sealed and put a stand in it, then there will be no dust on it.

And Misiee knows a lot about perversions))) it was necessary to cook from 5 at once)) and would not have to bend))) cut and cooked. Listoga checked, cool!

Just Came Across Your Channel and I Like Your Content and Subscribed.

Hi, this is Peter from NTD Television.Your videos are great!Our mission is to exalt the world, sharing truth, hope and humanity. We would like to download your content to our media pages.Can we get your permission for this?Thanks.

What about making one to order? Interesting cost.I would have done it myself, there is no tool.

use so Socket 423 of which there is little left, blasphemy!

I give advice on channel promotion1) replace the channel icon from Narison with the image of a transistor2) on the main background, too, change

that you would not suffer a garbage with an angular grinder when cutting, make a desktop circular, it is very convenient, cut even, the dimensions do not dance) the disk is naturally from the angular grinder for iron to put it) the edge of the sheet is squeezing it in a vise (if it does not climb into the leafgai) so even) it turns out) a stroke of cooplactone can be replaced with any tube (for example from a system or larger diameter) cutting it along one side.

Class current try a better microphone pliz vine voted norms, but the sound is stuttering as if I were aiming on the phone

The shelf of open stands arrived: OBT-Mini and Lian Li PC-T70W

Fans of testing “iron” quite rarely buy specialized buildings like an open stand, because they usually do not differ in versatility and at the same time cost no less than ordinary buildings. At the same time, many wealthy enthusiasts, professional testers of components and overclocks, on the contrary, do not mind getting an open stand. The purchasing interest in Streacom BC1, a model created by the efforts of the Open Benchtable group (Hwbot.Org, Overclocking-TV, Streacom) turned out to be quite high, and the developers decided to replenish the family of open stands by the product OBT-Mini. The features of the novelty are its compact dimensions, modality, transformation and support of one type of motherboard-mini.itx (170 × 170 mm).

In folded form, Open Benchtable Mini takes up a minimum of space. The thickness of the main plate and two supports does not exceed 1 cm, the total mass of the structure with a set of fasteners is 802 g. The material for the manufacture of the stand is anodized aluminum.

The process of assembling the system on OBT-Mini cannot be called simple, but it is worth considering that the product is designed for those who have at least initial engineering skills.

In addition to the motherboard of the Mini-ITX form factor, a bulky cooler can be placed on the stand (up to a liquid nitrogen evaporator), one graphics card, a small radiator of the SIO and the power supply of the SFX former with the sides of 125, 100 and 63.5 mm mm.

While Open Benchtable Mini still needs to make efforts on the part of engineers and marketers, the open stand Lian Li PC-T70W is already completely ready. From the previous PC-T70X solution, it is distinguished by color performance. With a price comparable with Streacom BC1 (about € 120), PC-T70W does not require assembly and disassembly, which in some cases can be both a plus and minus.

The input-output panel in the stand of two USB 3 connectors is built into the stand.0, headphones and microphone nests, Power and Reset buttons. The design takes 416 mm in length, 432 mm in width and 316 mm in height, and weighs 2.95 kg (not so little for the aluminum case). PC-T70W is designed to install the motherboards of an E-ATX form factor or smaller, four two-sloping video cards, an ATX-compatible power supply and a maximum of six 2.5- and 3.5-inch drives.

Having bought and attached an accessory T70-1W to the PC-T70W, you can turn the open stand into a case of.

BP standing stand, first version.

It was evening, there was nothing. The idea to build this stand has appeared for a long time. While the pieces of iron arrived, adapters, while the time appeared The review will not be complete and not correct, but which is.

It comes in a conventional box, with instructions.

What can? Operating Voltage: AC230V (EU) Max Operating Current: 16A Current Range: 0.01a-19.999a Power Range: 1W-3680W Indication of Frequency: 46hz-65hz Measurement of Consumption: 0.00kwh to 9999.99kwh Duration of Indication: Up To 9.999 Hours 59 Minutes Item Size: 12 6.3 7.5cm / 4.72 2.48 2.95in item Weight: 150g

Will be used to determine the consumption of the power of the studied PSU.

The main element of the stand: ammeter Juntek DC 0.01-100v 0.1-300A 40

It comes in a conventional box, everything is neatly wrapped in several layers of pimp.

Has just a wild volume of functions, but I, of course, will not use them. I need an exclusively ammeter. Characteristics

Characteristics: Material: plastic ABS! Model type: VAT-4300 voltage measurement range: 0.1-400 V permission for voltage: 0.1 to accuracy at the output: ± 2% 3 words current measurement range: 0.1-300A Current resolution: 0.1a accuracy: ± 5% 10 words! Temperature measurement range:.20 ℃.120 ℃ Power measurement range: 0-200KW power resolution: 0.001 W range of power: 0%.100%! Ampper-hour measurement range: 0-2000 kA resolution of the capacity: 0.001ah watt-hour measurement range: 0-4000kwh watt-hour resolution: 0.001wh time measurement range: 0-99 days! Resolution time: 1 second of the address of addresses for communication: 01-99 The range of wireless channel settings: AZ (26 channels)! NCP: 0.1-300A (negative settings of protection against current overload) OCP: 0.1-300A (positive configuration from current overload) OVP: 0.01-400 V (setting protection against overvoltage) LVP: 0.01-400 V (configuration of protection against low voltage)! Display: 1.8-inch TFT-ZHK display protection against time delays: 0-10S Module Measuring power consumption: about 0.4 W Module display consumption power: 0.5 W segain 10 meters meters meter: USB DC 5V or DC 10-30V Module of the Block Measurement Module: DC 12V Length of the USB cable: 1m!!

10a is not enough for the dough, I will refuse ammeter function. Voltage only for control 5V lines, to control the drawdown. It was necessary to take two, another 12V fishing line for a trimmer.

I thought for a long time about the correct connection to the circuit. At the exit I received: 2 upper pine is responsible for the power of the device itself. 3 Pina to take readings.

For use as a voltmeter, we beg red with red, black with a black and on the on-board network (subject to 4.5-30V) to relieve current strength, the blue wire clings to the minus of the load into the gap between the power supply and the load.

It all started with paper, for a long time and stubbornly tried to imagine a panel with devices, and then organize competent wiring. In practical performance it turned out approximately similar.

I began implementation with the search for a similar building in the basement of parents, which contains many mysteries.

There was a corps and a muzzle for it, after long preparations it turned out such a freak.

On the back of the prototype, this is such a quiet horror.

There were many fears, the wires are thin, the currents are planned large. The Chinese with Ali let down, one justification failed and sent only one adapter, the other parcel was lost. There were plans, divided the input power into 3-4 connectors, at least somehow compensate the thin wires. Total, I only have mom 6 pin and 8 pin. Problems climbed, BP Uhril for short and cut down. Why? Then I saw it (after searching in Google)

The connectors are different, be careful and do not repeat my mistakes.

Physically the same connectors 8 pin are diametrically opposite in the electrical part. But I thought where I sinned during the assembly: after all, I get a short circuit.

Shunt for the power part surprised me in size.

I cook according to the instructions for connecting in the gap of the submitted chain.

Here I made a mistake and did not use the external power for this block (GND and Vext connectors)

The main part of the load is the halogen bulbs of 35W each (10 pieces)

Установил в клеммные колодки, изолировал синей изолентой пластиковая проставка между ними.

Additional lamp for Over Load at 40W

Total: The load in theory is 350 190 40 = 580 watts, which will require up to 48a for 12V. I treated this relatively normal, but such numbers were horrified by such numbers.

Types of structures

Linear exhibition stand

A compact exhibition stand of a linear type with an open front side is installed in a standard series. An economical option for private negotiations or a small amount of goods. Depending on the overall concept and accessible space, narrow and deep, or sites with a wide open part of the facade are developed. The layout closed on three sides reduces the risk of embezzlement of products.

Through stand, or stand-carman

A variety of in.line design. The difference is that two parallel sides are open. Passing places attract attention, provoke visits to go in, give more opportunities to arrange an exhibition site and accommodate commodity offers.

Corner exhibition stand

The angle type exhibition stand located at the end of the linear row has two viewing sides, works for two passes. Practical solution for a small company. In size corresponds to a number of place, easily designed, suitable for presentation of products or negotiations.

Stand-Puloisters

The design open on three sides is located at the end of the row. The pen.type exhibition stand combines two standard corner places, works simultaneously for three flows of visitors. The peninsula is suitable for demonstrating cars, agricultural machinery, furniture and other bulky goods. A chic review of exhibits from all angles. Thanks to the spacious area, each visitor has free access to products.

Island exhibition stand

The exhibition complex is open from all sides. Professionally designed sites attract the audience, as well as peninsulas, are indispensable for demonstrating large.sized products. An island.type exhibition stands give a maximum of marketing capabilities, are located in prominent places in the ex.experters.