Connection All-in-One Printer to the router D Link. Connect the printer to Dir 320

Connect a printer to Dir 320, create a print server

Connect a printer to D-Link Dir 320 or create a print server?

Before creating and setting up the print server A: Save the DIR 320 settings, throw off the settings for the factory, update the firmware for 1.22 (last at the moment), restore settings.

Here it is considered how to make a USB printer with a network. The disadvantage of this method is that the computer to which the printer is connected should be turned on all the time. A way out of this situation. make a print server from the Dir 320 router or any other that supports the print server function.

Connect the printer to Dir 320

In order to create a print server from DIR 320, you need to connect your printer to the USB Dir 320 port, the printer indicator on the front panel of the router should light up.

Go to DIR 320 192 installation. Printer setup. printer installation master, reap further

Launching the installation program on a computer

Save the configuration file to the disk D (setting up in the opera opera), in browsers (Google chrome, Masilla Faeox). You need to click.

If the printer driver is installed, then you need to start the Printer_Config file.EXE.

The window is proposed to make a default printer

In the launch. Settings. Fax printers will appear printer IP_192.168.0.1_9100 (usb_port1). With its help, it is actually necessary to print

If the printer was connected via USB or through another computer, and we need to print through the print server-we should choose a network port in the printer properties-ports-IP_192.168.0.1 (TCP/ IP)

Access to the web-integer router D-Link

To perform all the settings, you need to get into the router menu. This is not required to install special programs. With an already executed connection in any browser, you need to set the following address in the address bar: Then you need to enter the login. admin and password. admin. If these actions are not transferred to the device integration, then you need to drop the settings of the router.

To do this, you need to hold the Reset button on the rear panel of the device for about 15 seconds, next to the ports. Then repeat the entrance to the settings menu. After passing the authorization, the system will propose to install its own password.

Important! Rest button presses all available settings. If the router has already been installed, then after the reset, re.debugging is required.

Initial setting of the router

After you can get into the settings menu, you need to update the firmware. To do this, do the following:

  • Select “Customize manually”.
  • In the “System” tab, select the “Update PO” function.
  • Next, through the review, you need to specify the path to the file, which should be downloaded in advance.
  • Click “update”.
  • Next, the router will start installing software. If the process is “hung”, then you should wait another 5-7 minutes and restart it by turning off the power.
  • After turning on, the router is loaded for 1-2 minutes and you can repeat the entrance through the browser.

When performing an update from the menu, you need to click “Expanded Settings” at the bottom of the page, then “System” and “Update”, then move from paragraph 3.

The value of the tabs in the integration

DIR-300 Interase with Basic tabs

The DIR-300 router Settings Wi-Fi and other functions are carried out through the web-intake. Its right part displays information about the software, IP device, the name of the created network. There are 4 tabs for the main settings on the left side of the menu:

  • Net. Contains all the main settings for Internet connection.
  • Wi-Fi. Helps set up your own wireless network.
  • Firewall. To configure the data located on the local network via the Internet.
  • IP television. Helps to set up a router to use IPTV if the provider has such a function.

All these tabs allow you to configure the work using the setup wizard. If you want to perform manipulations, you need to select a item in the lower right corner “Expanded settings”.

What values ​​need to be introduced to configure Internet access

Access setup is performed once, then the router is able to independently connect the Internet, even if it was disconnected from the network for a while. Different providers may differ in the connection method, but there are common settings for all:

  • Enter the settings integration using a browser and address
  • Select the item “Extended settings”, then “Network” and “WAN”.
  • Find the command “Add”.
  • In the PPPE section, enter a login and password.
  • In the L2TP and PPTP section, enter the login, password and address of the VPN server.
  • The type of connection should be selected “Static IP”.
  • Then IP, gateway and DNS server are introduced.
  • Data must be saved.

Important! All accurate data for the input must be clarified by the provider, just call the client service.

After preserving the web page will be updated. If all the data was entered correctly, then the Internet will become affordable, and the connection status will be “connected”. Now you can configure your own network, install the features of access and the operation of the local connection.

How to setup

Above, we examined how to connect the printer to the router via USB or Wi-Fi. But the steps discussed above may not be enough due to the need to configure the equipment used. Consider instructions for performing this work.

Roter setup

To connect the printer to the network through a router, only a few actions are required. the inclusion of equipment and the use of one of the above methods. The router itself does not require additional settings, because all the data has already been entered into it. After connecting to the router, the latter should see All-In-One Printer. If this does not happen, it is necessary to update the software to the latest version.

Setting PC

Before connecting the printer to the router via Wi-Fi or USB, it may be necessary to configure the computer itself.

Consider the algorithm of actions using the example of Windows 10:

  • Click on.
  • Select the TCP/IP device item, and then write down the address of the router (located on the back of the modem, for example,
  • Wait for the port search, enter the “special” type of device and go to the parameter task.
  • Find the LRP protocol and use any name.
  • Install the drivers on the printing device.
  • Give the name to the printer, remove the network common access (there is no total access) and try to print a sheet of paper.
  • Perform the same actions on other PC or laptops, because the printing device is recognized as a local machine.

These actions are enough to connect the printer over the network through a router, and in the future use the device. If you choose a method between Wi-Fi or USB, the first option is more preferable, but it is more difficult to set up.

How to connect a printer by Wi-Fi for Android and iOS

Sometimes there are situations when only a smartphone with Android or iPhone is at hand. In this case, you need to know the intricacies of connecting a network printer through a router using a smartphone.

With the help of adroide

If there is a Wi-Fi module in the print device, you can connect not only a PC or laptop, but also a smartphone.

  • Connect the necessary equipment. Serve power, connect the device with PC and put the cartridge.
  • Turn on the printer.
  • Connect the router if it has not been turned on before.
  • Turn on the Wi-Fi module on the print device. This can be done through the settings or using a special button. Detailed information can be found in the operating instructions.

After that, several ways to connect All-In-One Printer through a router using a smartphone-directly using a virtual printer or through a remote connection.

The easiest way is using a direct connection. Much depends on the smartphone, because many models allow you not to use programs, but they can connect with the network and transmit photos for printing directly. Many smartphones have special programs, for example, Canon Print.

If there is no such software, you can download it with Play Market (also suitable Printershare). The algorithm of actions is this:

Knowing how to connect the All-in-One Printer through a Wi-Fi router, and having a phone at hand, you can print a photo at any time or send a document for printing. Note that other applications work on the same principle, so you do not need to consider them separately.


If you connect the printer via Wi-Fi router on Windows 10, 8 or 7, try to transfer files to print using iPhone. The algorithm of actions is this:

  • Make sure the printing device supports AirPrint.
  • Check that all devices are connected to one Wi-Fi network and are in the working radius of action.
  • Open the program with which the seal will be carried out.
  • To search for printing, click on a special symbol (arrow or three points).

At the final stage, click on the print button and make sure that the document is printed.

Now you know whether it is possible to connect the printer to the router via USB or Wi-Fi, how to use a laptop or smartphone to solve the problem. The basic information on setting can be found in the instructions for the printing device and the router. The easiest option is how to connect a printer through a Wi-Fi router is to find the desired network in the printing settings and enter a password. But there is not this for you, there will be workarounds. The task of the article is to simplify the task, because the use of the above instructions allows you to exclude time loss and immediately send a document for printing.

Methods of connection

Before connecting your printer via a Wi-Fi Rooter, you need to consider all available options. Perhaps the wireless option will not be optimal specifically in your situation.

In total, 4 ways to connect the printer can be distinguished:

  • USB cable. The most popular and common option that allows you to connect printing equipment. This method is relevant when the router is equipped with a USB connector, and also has a printing function over the network. Objectively convenient version of connecting the printer to the router.
  • LAN Port. If you cannot connect your printer through the USB to the router, you can use an alternative option in the form of LAN port. For this, the printer must have a built-in print server and a network port. Then the connection to the router will be carried out through a patch cord.
  • Wi-Fi. Some modern printer models have an integrated Wi-Fi Module. This allows you to connect between devices using wireless technology. For example, the connection can be established between the printer with the Wi-Fi and the laptop, which is also equipped with a similar module by default.
  • Hardware print server. This is already a separate device to which the printer is connected. The printer server includes a LAN port, through which the router is connected.

Now about each connection method should be learned in more detail and in more detail.

USB connection

If the connection option is suitable for you through USB to connect a print printer to your router, then you will need to perform several actions.

Here the sequence will be approximately like this:

  • Connect the printer with the router by inserting the corresponding cable into the USB connector;
  • Both devices should be in a turn off;
  • Now turn on the router and wait for it to boot;
  • Then turn on the printer itself.

In general, the router itself is not necessary to set up separately. By default, he must automatically recognize the connected printer. It is not difficult to make sure of this. Just open the router web-integrate, and view the network card. The brand and model of your printing equipment should be displayed here.

If recognition was not possible, then you need to check the current status of the print server. In working condition, it will be the status of online.

If the printer has a built-in Wi-Fi-Module in the configuration, then you have a great opportunity to execute wireless technology without applying any cables, like through USB. Although it is quite natural that the printer will need to be connected to the power source, that is, to the outlet.

In this case, Wi-Fi-Division to the Printer can be implemented in 2 ways.

  • Via WPS. Each printer has its own instructions to activate WPS function. Therefore, it is better to look into the instructions here. This is usually done using a physical button on the router housing, or through a web-intese. Activate WPS and wait a couple of minutes. The indicator on the router must stop flashing, and the printer will be displayed in the network map.
  • WEP/WPA. Manual setting is carried out by analogy with the first connection to any Wi-Fi device using wireless technology. You should open the printer menu, select the network settings, find your home network, and connect to it. To do this, it is usually enough to specify the login and password. Other settings are not required.

The wireless connection has its obvious advantages. But the built-in Wi-Fi Module is far from all models. Therefore, you have to look for alternative ways to resolve this issue.

LAN port

Also, in some cases, connection is used via LAN Port. But this is relevant only for those users who have at their disposal a printer with a network port.

Then you can make a connection using the LAN cable, that is, a standard patch cord. The corresponding cable most often includes. If it is not, use the patch cord from the router itself. Plus there is always the opportunity to purchase it separately in the store.

Having opened the menu of the device, you need to set static IP. over, this is recommended to be done even in those situations where DHCP service works in the router. This is due to the fact that the IP of the printer will constantly change. This complicates the search process. It can periodically disappear from the list of devices available for connecting. Or you can specifically reserve a separate IP through DHCP settings.

After performed manipulations, the printer must be sent to reboot. He will do it automatically, or using the user. Then it will be displayed in the list of network devices.

It remains only to install the necessary drivers from the printer and try out the test print.

Hardware print server

If the printer does not have a network card or Wi-Fi module, and there is no USB connector on the router, then there is still the opportunity to organize connection through the router. Only in this case you will need to separately buy a hardware print server for yourself. This is a separate device that will act as an intermediate link between printing equipment and a router.

Budget devices have only one network port and the same number of USB connectors. expensive options are available at once several USB. Even the port of LPT may be optionally present.

For some printer servers, manufacturers offer an integrated Wi-Fi module. Due to this, you can implement a connection with the printer using wireless technology without using the cable.

Features of setting

Now directly to the settings of network printers through a router. Since there are several methods of connecting, the instructions for setting are offered separate.

Many are naturally interested in the question of how to configure your printer through a router using Wi-Fi wireless connection technology. But due to the features of the equipment, this option can not always be implemented.

So that the setting of the printer connected through the router does not cause difficulties, you should separately consider all aspects of this stage of connection.

connection, all-in-one, printer, router, link, connect


To begin with, how the router is set up. If the printer installation is required using a Wi-Fi Roter for this, direct intervention in the configuration of the router itself is not required.

To combine the two devices under consideration, that is, the printer and router, you need to perform a couple of actions. Namely, include equipment, and apply one of the considered methods.

Since all the data into the router has already been entered, nothing separately and additionally configured is required. It is important that the router recognizes the printer. If this did not happen, then you will have to deal with the issue of updating software, reinstalling the drivers. But at this stage, problems rarely arise.

A computer

But the PC setting will certainly need. Before connecting the printer to your router using USB or Wi-Fi, you will need to make some adjustments to the computer configuration.

Without this, setting up a printer connected over the network through a router may not work. In the case using the Windows 10 operating system, the instruction will have the following type:

In the vast majority of cases performed actions are enough to connect a printer network.

Thus, you managed to connect your printer directly through the router to the computer, and use it for different purposes and objectives.

over, at present there is a great opportunity to install a printer using wireless technology through a router using mobile gadgets for this.

At the same time, the nuances of the connection depend on what kind of mobile platform the device works. It can be iOS or Android.

Connection to iOS

Owners of the iPhone apple smartphone can configure the connection through a mobile gadget to their printer if the latter has a built-in Wi-Fi Module.

In this case, the instructions will have the following view:

If everything is configured correctly, then a printing command will be sent without any wired connection with the iPhone, and you will receive ready-made sheets with the necessary information.

Connection with Android

Again, if the printing device has a built-in Wi-Fi module, it is not necessary to use only a computer or laptop to print documents. Here it is quite possible to do with a smartphone or tablet running the mobile operating system Android.

First you need to perform the following list of actions:

  • Connect the equipment, season the cartridge, make sure that the printer is ready for full operation, turn it on;
  • Perform all the necessary manipulations with the router mentioned above;
  • Turn on the Wi-Fi function directly on the printer (through settings or a special button on the case);
  • Connect a mobile gadget to your home wireless network.

Now that the preparatory measures have been carried out, several options for connecting to the printer through a router using an Android smartphone are offered to choose from the user. This is a direct connection, the use of a virtual printer, or a remote connection.

The easiest way to make a direct connection. Here, much depends on the smartphone itself, since a number of modern models, even without outside software, ways to connect to the network, send a photo or text document for printing. Also for mobile devices, various applications were developed, presented by manufacturers themselves printers. For example, Canon is offered for the printing devices of Canon’s Canon Print.

Even without branded software, you can apply universal mobile programs. Usually in such situations you need:

Using a mobile device, you can without much effort and problems print any documents, photos using wireless technology.

But, as you know, it is important to pre.configure the connection of the printing equipment itself through the router. Depending on the model of the device, choose the appropriate connection method.

It is not difficult to set up a printer connection independently using a printer using a router. It is enough to follow the instructions and take into account the functionality of your equipment.

Did you have to connect All-in-One Printer via router? What method of connection do you consider the most convenient, effective and correct? Whether they came across some difficulties?

Subscribe, write reviews, leave Комментарии и мнения владельцев, ask topical questions !

How to connect to a remote printer via the Internet

Many users who have successfully dealt with the Wi-Fi task module puzzle over the problem of how to connect the printer via the Internet.

Dlink 620A. где кнопка Reset? и не работает вход Admin Admin? Решение

Experts recommend debugging for two stages: from setting up the personal computer itself, to which the All-in-One Printer (via cable) is connected to the tolerance to the secondary device, with the right to print documents.

Important! If there are several personal computers, laptops or mobile devices in the house, before each you will have to repeat the second stage separately. Otherwise, you should not expect the efficiency of the ligament and the press.

Setting for operation on the network

To obtain the expected result to the printing device, access should be opened. After entering the “Start” you need to move to “Devices and Prinaters” and find the current model of technology.

After clicking on the All-in-One Printer shortcut, select the Printer Printer Printer block, go into “access” and set a permit for general access for all users. After completion, any person with access can connect and print the necessary documentation.

Important! Accurate setting will make the printer publicly available for all trusted mobile devices and PC, which are connected using Wi-Fi.

connection, all-in-one, printer, router, link, connect

Open access to the printer

Debugging laptop for remote printing

The device requires adding it to the list of connected gadgets. For this, a simple algorithm is performed: from the “start.up” they enter the “Devices and Printers”, move to the “Printer Installation” Subseum. In the window display, select “Add printer”.

OS will automatically run the search for available devices and offer the one that was activated at the first stage. After that, you need to click on “Next” and wait until the operating system downloads the right drivers and sets the remote All-In-One Printer. After the appearance of the next window, they squeeze on “further” and “ready” or launch “stamping of the test page”.

connection, all-in-one, printer, router, link, connect

Important! After the procedure, a new printer will appear in the list of devices connected to the computer. You can send any documents to it through remote access, through the network, for printing.

The acquisition of additional equipment will create a modern device from an outdated All-in-One Printer, which can be used through Wi-Fi. Individual users prefer a change in old equipment to the latest, with the functionality already involved in it. The Wi-Fi Print Server for All-In-One Printer is a universal solution for inexpensive devices with disabilities.

Preparatory actions

After unpacking the router, install it in any suitable place, then inspect the back panel. Usually all connectors and buttons are located there. The wire from the provider is connected to the WAN integration, and in Ethernet 1-4-network cables from computers. Connect all the necessary wires and turn on the power of the router.

Before entering the micro.oprogram support, look into the network settings of the Windows operating system. Obtaining IP and DNS there should be put on an automatic mode, otherwise there will be a conflict situation between Windows and a router. Our other article on the link below will help you deal with the verification and adjustment of these functions.

We set up D-Link routers

There are several versions of the firmware of the considered routers. Their main difference is in an altered integration, but the main and additional settings do not disappear anywhere, just the transition to them is performed a little different. We will consider the process of configuration on the example of a new web-intake, and if your version is different, find the points indicated in our instructions yourself. Now we will dwell on how to go to the D-Link router settings:

Fast settings

We will start with fast setting or Click’N’Connect tool. This configuration mode is intended for inexperienced or undemanding users who need to set exclusively the main parameters of the WAN and wireless point.

  • In the menu on the left, select the Click’n’Connect category, read the notification that has opened and click on the wizard for launching “Next”.
  • Some company routers support work with 3G/4G modems, so the first step may be the choice of the country and provider. If you do not use the function of the mobile Internet and want to stop only on the WAN-connection, leave this parameter on the “manually” value and move to the next step.
  • A list of all available protocols will be displayed. At this step, you will need to contact the documentation provided to you when concluding an agreement with the supplier of Internet services. There is information about which protocol should choose. Mark it with a marker and click on “Next”.

A proping device will be carried out using a utility. This is necessary to determine the availability of Internet access. You can manually change the check address and perform the analysis again. If this is not required, just go to the next step.

Certain models of D-Link routers support work with the DNS service from Yandex. It allows you to protect your network from viruses and scammers. You will see detailed instructions in the settings menu, and you can also choose the right mode or completely refuse to activate this service.

Further, in fast settings mode, wireless access points are created, it looks like this:

The last step is to work with IPTV. Select the port to which the TV set will be connected. If this is not available, just click on “skip a step”.

This is where the process of correcting the router through Click’n’Connect is completed. As you can see, the whole procedure takes a fairly small amount of time and does not require the user to have additional knowledge or skills for the correct configuration.

Manual setting

If you are not satisfied with the quick settings mode due to its limitations, the best option would be to set all the parameters manually using the same web-integse. Let’s start this procedure with a WAN connection:

Now let’s set Lan. Since computers are connected to the router via a network cable, you need to tell about the commissioning of this mode, and it is carried out as follows: move to the LAN section, where you have access to the IP address and the network mask of your integer, but in most cases you need to change nothing. It is important to make sure that the DHCP server mode is in an active state, since it plays a very important role in automatically transmitting packages within the network.

On this, the Wan and LAN configuration is completed, then you should disassemble the work with wireless points in detail:

  • In the Wi-Fi category, open the “Basic Settings” and select a wireless network if, of course, there are several. Mark the point “Turn on the wireless connection”. If necessary, adjust the broadcasting, and then set the name of the point, the country of location and you can put the restriction on the speed or number of customers.
  • Go to the “Security Settings” section. Here, select an authentication type. We recommend the use of “WPA2-PSK”, since it is the most reliable, and then just set the password to protect the point from extraneous connections. Before leaving, do not forget to click on “apply”, so the changes will definitely remain.
  • The WPS menu work with this function. Its activation or deactivation, discharge or updating its configuration and launch of the connection is possible. If you do not know what WPS is, we recommend that we familiarize our other article on the link below.

This ends the commissioning of wireless points, and before completing the main stage of the configuration, I would like to note a few more additional tools. For example, the DDNS service is activated through the corresponding menu. Click on an already created profile to open the editing window.

In this window, you enter all those data that you received when applying for this service from the provider. Recall that the dynamic DNS most often does not need an ordinary user, but is installed only if there are servers on PC.

Pay attention to “routing”. by clicking on the “Add” button, you will be moved to a separate menu, which indicates which address you need to configure the static route, avoiding tunnels and other protocols.

Printer connection to the router

In order to install the printer through the router, you need to connect the printer to the USB port of your router. In this article I will tell you how to connect a Wi-Fi Router ASUS RT-N56U and printer in Windows 7 OS. Connecting the printer to this router is also possible using a special utility:

The utility allows you to automate the connection and configuration of the network printer and works only in Windows OS. Next, I will tell you how to connect the printer through the router manually.

Attention! Make sure your printer model is supported by the router! Check the printer compatibility with ASUS router here.

Connecting a network printer to Windows 7 OS.

Check the connection of your printer using a web-intese, opening any browser and enter the address line http: // In the window that appears, enter the login and password (Admin and Admin, respectively).

Next, go to the Start menu. control panel. devices and printers. add a printer (button at the top). In the window that appears, select “Add the local printer”:

In the next window, select the printer port (see. rice. four). Go to the “Create a new port” item and select Standart TCP/IP Port in the drop.down list.

After pressing the “Next” button, the printer installation master will ask the IP address of the printer on the network, the printer address corresponds to the IP address of the Indicate it in the field name or IP address and remove the dick from the point “Surrender the printer and choose the driver automatically”. Click “Next”.

The window “Search for the port of TCP/IP” will open. Wait until the window appears to enter additional information about the port.

Select the type of device regular (Generic Network Card) and click further:

Now you need to install the driver for the printer. Select your model from the list or click on the “install from the disk” button and in the conductor indicate the path to the file with the driver. Then click on. Enter any printer name and press the button again. A window will appear with the printer installation process at the end of which the installation master will offer to configure the overall access to the printer through a local network.

Choose the option “There is no common access to this printer” and click on. The master will report the successful installation of the driver and offer to use the default printer. Now it remains to press the “Ready” button and configure the properties of the port.

Open the Start menu. devices and printers. Find your printer, click with the right mouse button and select the “Printer Properties” item. Go to the Porta tab, put a box on the port that you created earlier and click on the “Reference Port” button “

In the settings of the TCP port, select the LPR protocol and set the name. Now click OK to save settings.

Printer connection via Wi-Fi router

Digital technologies have firmly entered our daily lives and continue to develop rapidly. Now it is considered commonplace if several personal computers, laptops, tablets or smartphones operate in the dwelling of a common person. And from each device sometimes it becomes necessary to print any texts, documents, photos and other information. How can only one printer be used for these purposes?

If your router has a USB port, then with its help you can make from a simple network printer, that is, from any device connected to your Wi-Fi network, you can easily and at ease of any content easily and at ease. So, how to correctly configure the connection of the print device and router? We will find out.

Stage 1: Setting the printer connection to the router

The setting process will not cause any difficulties for any user. Pay attention to an important detail. all manipulations with wires are performed only with the devices turned off.

    By means of a standard USB cable, connect the printer to the corresponding port of your router. Turn on the router by clicking on the button on the back of the device case.

Wending connection

The option with wired connection is implemented thanks to the local cable, which is complete with network equipment or can be purchased separately. However, the connection of the devices with one wire is not the only action that the user needs to be performed. First, the router needs to be unpacked and a place for it is to be the length of the WAN-cable and the wires of the local network is enough to connect. Consider the Wi-Fi coating area, because it is almost always required that the signal is equally good in any room or apartment room. After that, proceed to the following instructions.

On this, the connection of the D-Link router to the computer through the local network cable can be considered complete, however, in some cases, additional setting up the operating system is required. You will find more detailed instructions on this topic in another article on our website by clicking on the link below.

Additionally, take into account that not always after the first connection, the state of the network will seem to be “connected”. Often there is no access to the Internet, and this is due to the fact that through the web-intese, the Wan parameters are not set, and the provider uses a protocol that differs from the dynamic IP. We will talk about this in more detail at the end of the second option.

Wireless access point (Wi-Fi)

Not all models of devices from D-Link Wireless access point are activated by default, which necessitates its additional tuning in the web-integse. You can enter it only after the router is connected to the computer on the cable of the local network. Implement this connection first, and then proceed to the instructions.

✓Convert any USB Printer to WiFi Printer | Print From Android | Print Over WiFi Network WiFi Router

Let us return by the time of setting up the type of network, which we mentioned at the end of the first option. The fact is that the Wan parameters need to be set up separately so that you can not only enter the web-intese, but have access to the Internet. We advise you to get acquainted with the detailed analysis of the complete configuration of routers from D-Link to understand which parameters should be changed to ensure the correct receipt of traffic from the provider. Only after that you can enter the Internet both on a computer and on mobile devices, regardless of the type of connection.

These were all recommendations for setting up the connection of D-Link routers with a computer and mobile devices. Follow the above instructions, given all the nuances of each option to easily cope with the task.

We are glad that we were able to help you in solving the problem.

In addition to this article, the site has another 13177 useful instructions. Add the site into bookmarks (ctrld) and we will definitely come in handy for you.

Describe what you didn’t succeed. Our experts will try to answer as quickly as possible.