Connect Xiaomi headphones to iPhone

Table of Contents

Xiaomi Mi Air 2 SE: how to connect new ones, and what to do when they stopped connecting

Xiaomi’s new wireless Mi Air 2 SE TWS has been on sale for a week now (in China, at least). They say that the audience really liked them right from the start and are simply megapopular.

also because this model was also originally designed to work with smartphones of the “native” brand Xiaomi and other Android-models, as well as with the iPhone. In this regard, briefly about.

how to connect Xiaomi Mi Air 2 SE TWS headphones to a smartphone or tablet

This means that the Mi Air 2 SE TWS model connects to an iOS or Android device as follows:

  • if the headphones are completely new (i.e. just out of the box and have never been connected), then before the first connection it is recommended to charge them completely (i.e. put them in the case and connect it to the USB port of the computer or charger via cable) or, if time does not allow, leave them for at least 10 minutes (and during this time you cannot remove the headphones from the case);
  • then we take out the charged Xiaomi Mi Air2 SE from the case, after which the headphones should turn on and switch to pairing mode automatically (and if you have a Xiaomi smartphone with MIUI and Bluetooth is not disabled, then he will also “see” the headphones himself, what is here will also inform you with the appropriate notification);
  • turn on the Bluetooth-module of the smartphone (“Settings” “Bluetooth” On);
  • in the list of detected devices we find and tap “Mi Air 2 SE” (if the system asks for a code, enter 0000. that is, four zeros).
  • firstly, Xiaomi Mi Air 2 SE is able to remember the last Bluetooth pair, that is, the smartphone or tablet to which it was connected for the last time, the headphones are automatically found;
  • secondly, in order for the headphones to connect to the smartphone / tablet automatically, it is enough to open the case cover;
  • Thirdly, the following Xiaomi models currently support the headphone detection notification function:

How to reset the Xiaomi Mi Air 2 SE headphones

This is for the case when, during operation, the smartphone has ceased to “see” the headphones, or they do not connect, or do not play, or only one is playing. Problems like this happen sometimes too.

At the same time, if Mi Air2 SE was not beaten, dropped or bathed for a long time, then in the vast majority of cases, this kind of trouble occurs due to a software failure. To put it simply, the headphones are malfunctioning. Consequently, the problem can be eliminated in the standard and most effective way, namely by the so-called “hard reset” of the headphones, i.e. force reset their software to factory settings.

The Xiaomi Mi Air2 SE is rebooted as follows:

  • we put both headphones in their charging case (we do not close the lid);
  • press the touch panel of any earphone and hold it pressed for at least 3 seconds until the LED indicator starts flashing alternately red and blue. the reboot is complete;
  • now open the smartphone’s Bluetooth settings and delete the current pair from Mi Air2 SE;
  • after that, we reconnect the headphones to the smartphone (we create a new pair, the procedure is usual. see above).

How to connect Bluetooth (Bluetooth) headphones to Xiaomi (Redmi)

Users of the Xiaomi (Redmi) smartphone can connect Bluetooth headphones without restrictions, because the phone supports all codecs available on the market.

Bluetooth versions are backward compatible, which means that Bluetooth 5.0 is capable of working with Bluetooth 3.0, i.e. modern Xiaomi will easily connect to old headphones.

Before starting the procedure, I will note that there are 2 types of connection:

  • Pairing. it is necessary when you first connect Bluetooth headphones or speakers to Xiaomi, at this moment the data encryption code is exchanged between the gadgets, which is used all the time until you forcibly delete it from the phone’s memory;
  • Automatic connection. if the pairing is successful, the next time the headphones connect to the smartphone automatically.

I will demonstrate the connection using the example of the Sennheiser Momentum M2 IEBT.

Enter the general settings, find the “Bluetooth” item. Turn on the wireless module with the top switch. Now it is necessary not only to turn on the headphones, but to put them into pairing mode. Usually this is a long hold on the power button, in my case about 6 seconds in the off state. If the headphone or wireless speaker has an indicator light, in pairing mode it starts flashing red and blue alternately, but it is better to read the instructions.

So, you have entered the headphones into the required mode, now on the smartphone screen, click on the “Refresh” button. In the section “Available devices” in a few seconds the name of the Bluetooth gadget that you want to connect will appear. Click on it. The connection mode will start, after which a request will appear for permission to access contacts and call modes, this option does not affect listening to music, it is configured according to your understanding, but in any case, you must click “Accept” for the connection to be established. Now Momentum M2 IEBT has moved to the “Paired devices” section, which means that next time it is enough to turn them on in the usual way, and after a second they will automatically connect to Xiaomi.

How to pair Redmi Airdots with Iphone XR

This can be helpful:

Hi, my name is Timur. Since childhood, I have been fond of computers and the IT Industry, I like it, this is my passion. Over the past few years, I have been deeply interested in Xiaomi: ideology, technology and a unique approach to explosive business growth. I own many Xiaomi gadgets and share my experience of using them, but most importantly. solving problems and incidents that arise under unexpected circumstances on the pages of Mi-check.ru

How to connect Mi AirDots to iPhone phone?

The wireless headphone manufacturer in China has guaranteed connectivity to both Android and iOS. Does this mean that Mi AirDots can be connected and configured to every device called Apple? When connecting iOS devices, everything will depend on the compatibility of the bluetooth release used in the devices. If you have problems with your iPhone, you should immediately take it to a service center. You can find out more about repair services on the website isupport.kz. It’s no secret that audio output products from Xiaomi have begun to be manufactured using a wireless protocol of at least version 4.2, and AirDots products from 2019 already support Bluetooth 5.0 and the AAC codec made specifically for Apple.

Connecting Xiaomi AirDots with iPhone

Step 1. Start Bluetooth support on iPhone (Settings, Bluetooth, slide the toggle to On). Allow time until the phone finds all connected Bluetooth devices.

Step 2. Take the Xiaomi AirDots out of the charge container. If the headset is in a case, you will not be able to connect and configure them to any device as usual. Outside the container, they will instantly start working and the status LED will flash off-white. Therefore, the right earphone will connect first and then the left earphone, they will start to function in tandem.

Step 3. A new name will appear in the search list for Bluetooth devices connected to the Xiaomi Redmi AirDots, or it will be Xiaomi Mi AirDots (or AirDots Pro. depending on the model). A radar that looks for different wireless devices is always on. You may need to wait a bit for the headphones to show up in the search list. Otherwise, you will need to disable and re-launch Bluetooth on the iPhone in order for it to detect your AirDots.

Step 4. Go to “Redmi AirDots_R” and the connection between the headset and the iPhone will continue to be established automatically, you just need to agree to this connection. After the procedure is completed, the pointer on the headset will turn off whitish and go out.

Almost always, Bluetooth headphones connect to the iPhone without question. If you successfully solved this problem during the first connection, then later, taking the headphones from the charging container, the connection with the iPhone will start automatically. At the same time, it should also be canceled that first of all it is necessary to remove the right (main) earphone from the container, otherwise, if you connect the left one first, then only one earphone will start working for AirDots. Therefore, only the left earphone will function, and the connection with the right one will be lost. Now you know how to connect Xiaomi AirDots to an Apple smartphone.

How Xiaomi Wireless Headphones Work

If you take the earpiece out of your ear, the music doesn’t stop like it does with Airpods. The devices are disconnected only in the case, and are connected back to the phone when they are taken out:

  • put only the left one in the case, it will turn off, and the right one will work;
  • remove the right one. both will turn off.

Headphones work with voice assistants Siri, Google Assistant, Alice. The controls are intuitive:

  • 1 touch. pause or answer a call;
  • double. call the voice assistant. The only thing that is inconvenient: when you want to fix the earpiece and inadvertently press the touch panel, the music will stop;
  • holding one or more seconds. call cancellation;
  • double tap during a call. mute the microphone.

How to use Xiaomi AirDots wireless headphones

4 hours. And if you listen to the tracks alone, then the device’s performance will increase by 1 hour. The Bluetooth headset is connected in the same way. both to the iPhone and to Android.

  • Hold the touchpad of one earbud.
  • The phone settings will display “Mi AirDots BASIC_R” or “Mi AirDots BASIC_L”. whichever you choose. For example, the left one. While he is blinking often, it means he is looking for the right one. After 15 seconds after activation, it will blink less often. from this moment, the earphone is activated as an independent device. It’s ready to pair with your phone.

And yes! The sound of the AirDots babies is what you need. With bass too. But only if you choose the right ear pads that come with the kit. They should fit snugly into the ear canal. A sure sign of “your” size. when “ears” are not felt when worn.

Read more:  Xiaomi Mi Band 4 Does Not Turn On

How to connect Bluetooth headphones to your phone

The Xiaomi AirDots feature is the touch panels on the outside of each earphone. They can be used to connect Xiaomi wireless headphones to the phone.

  • Press and hold both earbuds until you see a double purple-red blinking. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other. As soon as this happens, you will see a pale purple blinking of the right earbud. He is in charge.
  • Go to the Bluetooth settings of your smartphone. Available devices will display the designation “Mi AirDots BASIC_R”. These are your headphones. The phone will connect to the right one, and that will connect to the left.

Sometimes AirDots sync separately. The reason. the left “ear” “loses” the right.

4 things to do if one wireless earbud doesn’t work.

  • Unplug the two earbuds: hold down both touchpads until the red lights turn on.
  • Hold for 30-50 seconds: first, the white indicator will turn on, then, after 10-20 seconds, it will light up in red-white. The indicator will blink 2 times.
  • Continue to hold until they flicker a couple of times and go out for a few seconds. Then they flicker a couple more times. this means that the settings have been reset.
  • Now put the “ears” in the case and take out both of them shortly. The left one will look for the right one, synchronizes with it, and you can connect to the phone.

How to charge wireless headphones

Xiaomi AirDots charges the case, and it itself is powered by micro USB. Not 1.5 hours. as the manufacturer says.

45 minutes. The case is equipped with a 350 mAh battery, it is enough for three recharges.

  • If the diode does not flicker and glows red, the battery is charging.
  • White color indicates 100% battery charge.

Watch the video review of Mi AirDots, their problems and solutions

How to connect a fitness bracelet Mi Band 2, 3, 4, 5 to an iPhone

Popular Xiaomi Mi Band fitness bracelets are traditionally paired with phones from the same manufacturer or many others that produce smartphones running Android. But what about iPhone owners who also want to use an inexpensive functional bracelet? The answer is simple. read our instructions and get complete information on how to connect Mi Band of any generation. 2, 3, 4, 5 to the iPhone, set everything up and enjoy your work.

Xiaomi Mi Band 2

The bracelet belongs to the early versions, so the functionality cannot be called extensive: tracking the distance traveled and the number of steps, the calorie burner counter and the smart alarm function. In addition, sleep monitoring options, a heart rate monitor and a notification center are available to receive incoming calls and view messages.

Xiaomi Mi Band 3

This version has more extensive functionality compared to the second generation. In addition to the basic options, the bracelet includes: call notifications and alerts from connected social networks; reminder of important events and dates; sleep monitoring and adjustment; smart alarm clock that adjusts to biorhythms; weather data; stopwatch; built-in timer.

Possible problems

  • The connection was successful, but Mi Band 5 does not respond and does not display a number of functions. Charge the bracelet battery to 90-100%, then check the functionality.
  • If the phone does not see the tracker, then the problem may be the full memory of the device. Clear the cache and possibly memory, then try to reconnect.
  • If you have problems with the lack of certain statistics, then check the connection to Wi-fi, Bluetooth and GPS.
  • If the notification “Reset the fitness bracelet” appears. then reset the settings. This is especially true if the bracelet has been in use for a long time. This solves a number of problems that could appear during the updates.

Connection algorithm

To connect a 3rd generation gadget from Xiaomi, you need to update your iPhone to the latest version of iOS. Otherwise, the Mi Fit app may not work correctly. You also need to take into account that the bracelet can only be used if you have an iPhone 5S or any newer generation. Unfortunately, 3 and 4s are no longer updated to the latest version of iOS.

  • Install on iPhone and launch the Mi Fit app.
  • Create a personal account linked to your mail or mobile number, if you don’t have one yet.
  • After successful registration / authorization of the account, the standard Mi Fit page will open, where the “Add device” button will be available. Click on it and in a new window with a list of devices select “Bracelet”.
  • Wait a bit for the connection to take place.
  • A connection notification will appear on the tracker screen. you must press the button to confirm synchronization.
connect, xiaomi, headphones, iphone

Review of Xiaomi Mi True Wireless Earphones 2 Basic

First, you need to immediately make it clear that the monitored headphones are a cheaper version of the Mi True Wireless Earphones 2, announced earlier this year. They lack support for the LHDC codec, which is the only difference from the older model. Also, the gadget in question is known under a different name in China. Mi AirDots 2 SE. Actually, now that the main points for distinguishing the novelty from other devices with a similar name and appearance have been sounded, we can proceed to the review.

The Xiaomi Mi TWS 2 Basic charging case is slightly larger than we are used to seeing in devices of this class, it has an unusual shape and opening mechanism. However, the case is lightweight and fits comfortably in most s. You may be limited only in using the coin on jeans, which they often like to use for storing a headphone case.

When you open the case, in front of you are in-ear headphones, they are completely similar in appearance to those in the Mi TWS 2 case. The shape resembles that of Apple Airpods, but the rod itself with the microphone removed is somewhat thicker. If before that you wore the same Airpods, then you will have to get used to these headphones, but the addiction will pass quickly. It is worth remembering that the headphones cost only 40 euros and we will continue to remember this throughout the review.

Still, the perfect news is that these are in-ear headphones, not vacuum plugs, so they will fit most ears. Supports earplug detection. playback stops automatically.

If you have a suitable Xiaomi smartphone with the latest firmware version, then connecting Mi TWS 2 Basic is as easy as connecting Airpods to an iPhone. In the sense that as soon as you open the lid of the case next to your smartphone, a plate appears on the display with the charge of the case and headphones and a connection proposal. That’s all, no need to go into the settings, select the Bluetooth item and connect the devices each time.

However, there is no place for panic, even if your smartphone is not from Xiaomi. The headphones can be easily connected with another smartphone, unless there is a nice connection plate with animation on the display.

One interesting thing: there is a tiny white LED not only on the case, but also on each earbud. It flashes when pairing or low battery.

The case has a built-in 410 mAh battery, which is enough for four full charges of both earbuds. The case is charged via the USB Type-C port, there is a cable in the kit. Fully charging the case takes about 90 minutes.

The maximum charging power is 5W (5V / 1A), so charging can be done either from an outlet or from a laptop. Charging will complete successfully even from the old 2.5W ports, but it will take longer.

The charging of the headphones in the case is carried out through the contacts that are at the ends of the rods of each of the headphones. Headphones in the case are attached to magnets, their “refueling” begins immediately after taking a position. Tests have shown that 5-7 minutes of additional charging is enough for the headphones to work for another hour. It takes about 30-40 minutes to fully charge each earbud.

Mi TWS 2 Basic supports touch control on both earbuds. Double tapping works like Play / Pause / Answer / End a call or call the voice assistant. Each earbud has three sensory zones (top, middle and bottom). Each one performs its own actions. Gestures with these zones work as expected. The only thing you need to get used to pressing and holding in the right place. We are not talking about weeks of getting used to it, a couple of days is enough for many.

Unfortunately, there is no way you can reconfigure the locations of the gestures, you will have to remember how Xiaomi itself implemented it.

Sound quality is, of course, one of the most important qualities of a headphone. Well, here Mi TWS 2 Basic is unlikely to surprise and their sound quality is easiest to describe with the last word of their name (Basic. simple). They sound usually, the depth of the sound is almost not felt, the high ones are also not in shock. However, the vocals seemed great and this is the last thing you expect from the headphones for 40 euros.

Despite the 14.2-mm driver, the headphones sound exactly no better than the same Apple Airpods. No, we are not saying that they sound terrible, but when compared ear to ear, these headphones from Xiaomi show that they lack sound quality. However, all this is absolutely irrelevant if you are used to using such headphones for watching movies or listening to podcasts.

Well, if you start comparing with other headphones on the market in this price category, it turns out that very few people can give the user a better user experience. Another important advantage is the cancellation of conversation noise (both microphones work). The interlocutor hears and easily understands what you are talking about in these headphones.

The promised range of the Mi TWS 2 Basic is 10 meters. Xiaomi did not deceive, and at a distance of 10 meters without walls, the headphones continued to work as expected. The distance is halved if there are two walls between the smartphone and the headphones.

Xiaomi promises 5 hours of battery life for each earbud when playing music at 50% volume. Under some circumstances, the earbuds may even last a little longer. In our test, fully charged headphones played music at 65% volume for exactly 5 hours, after which they had 10% battery left.

connect, xiaomi, headphones, iphone

How to pair Redmi Airdots with Iphone 7 or Iphone 7 plus

Making calls with headphones drains them as expected. If you want to use them as a headset, then the best option is to use them one at a time, first one, and after discharging the other. Then the total time of use will stretch up to 7 hours (3.5 hours for each earphone).

For those 40 euros that these headphones cost, the user will receive moderately good sound, excellent signal quality and good noise reduction during telephone conversations. Audiophiles and bass aficionados are passing by, these headphones won’t be able to meet their needs.

Mi TWS 2 Basic is ideal as a headset or earphone for listening to podcasts / watching YouTube or movies. The relatively low price makes them suitable even for training in the gym.

Xiaomi AirDots control.

Xiaomi AirDots are in-ear headphones. They sit in the ears quite tightly, they do not fall out, the set includes ear pads of different sizes. Noise isolation is also good.

The headset is splash-proof, so if you get caught in the rain with it, nothing bad will happen. Each earphone has a mechanical control button with LED indicator. It will blink white when connected to an audio source. You can control the headset from any earphone. How to operate Xiaomi AirDots instruction:

  • Press the button once to play or pause a track.
  • A single press is also used to answer a call.
  • If you want to drop the call, then hold the button for a second.
  • To turn on the voice assistant, double-tap.
  • To turn off or on the headset, hold the button for 3 seconds.
Read more:  Unlock Iphone Se From Icloud

You can switch tracks only through a smartphone. Controlling the accessory is quite simple, but since the buttons are not touch-sensitive, but mechanical, when you press them in your ear, you will hear a not very pleasant sound. Therefore, try to press gently so as not to experience discomfort. When you remove one earbud from your ear, playback will not automatically pause. Tracks will stop playing only when Xiaomi AirDots are folded into a case.

How to connect Xiaomi AirDots.

It is not very difficult to connect Xiaomi AirDots, but you cannot do without instructions. Xiaomi AirDots manual:

  • Hold the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case. Next, take the headphones out of the case and wait until they pair up.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made. The smartphone will connect with the right earphone, and that will automatically connect the left.

It happens that the smartphone does not see the left headset. This happens when there is an out of sync. How to connect Xiaomi AirDots in this case. Try this:

  • Reload the headset by holding down the control buttons.
  • Put the earbuds back in the case and take them out again so they can sync again.

After that, they should connect to your smartphone. If you have any difficulties, then the headset comes with detailed instructions for connecting.

Review of Xiaomi Redmi AirDots headphones: how to connect and reset?

Choosing TWS earbuds? Xiaomi has recently introduced the budget, but high-quality Xiaomi Redmi AirDots headphones to the market. In this article, you will learn how to connect Xiaomi AirDots and what they are.

Sound and headset.

The highlight in any headphone is sound. Surprisingly, a budget model like Xiaomi AirDots will pleasantly surprise you with it. The device has good bass, it is quite comfortable to listen to music even at a volume of 60-70%. The middle frequencies are poorly audible, but there are no problems with the lower and upper frequencies. Xiami AirDots are quite suitable for listening to electronic and pop music.

The price-quality ratio of the headset is on par. The main thing is to figure out how to connect Xiaomi AirDots and you can enjoy listening to music. As for the microphones, the interlocutor will not always hear you well and during a conversation you may sometimes feel that the interlocutor is somewhere far away. The accessory has good noise isolation, no extraneous noise will be heard, but using Xiami AirDots as a headset is better in extreme cases.

Design and equipment.

When buying Xiaomi AirDots, you will receive the accessory itself, a case for charging and storage, two pairs of ear pads of different sizes and instructions. Alas, you will not find a charging cable for the case in the kit. Therefore, to charge the device, you also need a micro-USB cable.

The undoubted plus of this model is that the case is very compact and can be easily placed even in a jeans The weight of the charging case together with the headset is only 35 grams. The case itself is plastic, but for such a price it was not worth expecting something else. In general, the design is decent. The lid of the case closes tightly and when carrying the headphones will definitely not fall out of the case.

Features of wireless headphones.

Although Xiaomi Redmi AirDots are budget headphones, their specifications are quite good.

  • Connect via Bluetooth 5.0.
  • IPX4 protected (splash-proof).
  • Work on a single charge for 4 hours.
  • Charged from the case in 1.5 hours.
  • Case charging takes 2 hours.
  • Weight: 35 grams.
  • Dimensions: 62 × 40 × 27.2 mm.

Airpods Pro

The top model of headphones from Apple pleases everyone, except for the price: there is a gorgeous (for “plugs”, of course) active noise cancellation, convenient gesture control, a pleasant “transparency” mode, good battery life. but the cost is biting. The fake cost us much cheaper.

There should be no Chinese inscriptions in the recesses of the headphone cover. On the right is a fake

Even from sealed boxes, it’s easy to tell where what is. Firstly, the original will definitely have a tongue with an arrow. you need to pull it to remove the polyethylene. Fake Airpods Pro have nothing like that. Secondly, the seams on the polyethylene of the original are thin and even, the film itself does not wrinkle, as if it was soldered over a lighter. On the lower part, serious differences are also visible: the fitting of the lid and box for real headphones is much more accurate, the gaps are minimal. There is one more nuance: the color of the cardboard in the original is “warm”, slightly yellowish, and in the fake the shade is closer to gray.

Left. fake, right. original Left. fake, right. original Left. fake, right. original Left. fake, right. original Left. fake, right. original

connect, xiaomi, headphones, iphone

The covers themselves are not very different in appearance, and it seems that purely outwardly, without taking them in your hands, you will not feel the difference at all. And then we notice an amazing thing: there is nothing in the place of the diode. there is just a hole into which the tip of a toothpick or a needle can easily enter. The original has no such disgrace.

In the original, the hole for the diode is neatly closed with translucent plastic

Already when the lid was thrown back, there were a lot of differences. The first moment: the lid opens at a different angle. In real Airpods Pro, it swings open more than 90 degrees and more or less firmly retains this state. if you put the case open on the table, the lid will not slam shut. In the case of a fake, the lid opens 90 degrees and constantly closes when not needed, literally from the wind. There is also a nuance with the fit of the lid itself: it walks a little to the sides and in the original, but the movement is less than in fake Airpods Pro, and in general there is no feeling of laxity. the lid of the fake case can be easily moved obliquely, unlike the original.

On the right is a real and functional grille, on the left is just a cover

If you remove the rubber seals that are inserted into the ears, then all questions regarding how to distinguish the original from a fake immediately disappear. Just take a look:

What’s even more interesting, the original earbuds don’t fit into a fake case, and vice versa: fake Airpods Pro won’t fit into a genuine case.

The biggest surprise for us is that the fake connects to the iPhone just like the original. Previously, a sure sign of a fake was the classic connection via Bluetooth settings, while real Airpods communicated with the smartphone through a pop-up menu, it was enough to just bring the case with the headphones to the iPhone and flip the lid. But now the fakes can do the same trick: an animation pops up, the user is asked to make the initial setting, insert the earpiece into the ear, and so on. In general, do not get fooled by this method of connection, fake Airpods Pro can be easily confusing. But there is a thing that, thanks to Apple, cannot be faked.

Only real Airpods will be displayed in the “About this device” section of settings: there is an Airpods item, which indicates the manufacturer, model number, serial number, firmware version and hardware version. On the left. original Airpods Pro connected to the iPhone, on the right. a fake. Please note: on the iPhone on the left there is a line “Airpods Pro headphones”, and in the case of fake Airpods Pro on the smartphone on the right, it is not

Another point that came up when comparing the original with the fake is that genuine Airpods Pro, when connected for the first time, offer to set up Siri activation, but there is no such option in fakes:

As for the sound, from the very first seconds after turning on absolutely any composition, you can distinguish the original from a fake. Firstly, the sound of the fake is terribly flat and wheezing. Secondly, switching between the modes of active noise cancellation and “transparency” does not change anything at all. In fact, there is no active noise reduction in a fake: only rubber nozzles filter the sounds of the environment, while in real ones there is an honest cut off of external stimuli.

  • Label on the packaging film.
  • Displaying headphones in the About this device settings section (this is the most reliable method).
  • Siri setup request.
  • The lid of the case holds tight and almost does not wobble.
  • The button on the case is pressed quietly, without a loud click.

Synchronization with two or more devices: so that there are no problems with connection

Airpods are totally getting improved #Apple # wwdc2020 #watchos #iPhone #ipados # ios14

At WWDC 2020, Apple showcased new features for Airpods and Beats. Now they automatically connect to paired devices based on their activity.

They called the iPhone. the headphones connected to it. We started watching a movie on the iPad. the accessories automatically switched to the tablet. Video conference started on Mac. Airpods connected to computer. So you forget about the power button, you do not have to waste time to disconnect the headphones from one device and connect to another.

Airpods and Beats are now working as a benchmark in the ecosystem. However, these are not the only headphones that can connect to multiple devices at the same time. For example, Jabra Elite 75t and Samsung Galaxy Buds can pair with two devices at once. This will greatly simplify your life. This is called multipoint mode.

Expensive Airpods are better than cheap Mi Bands. Secret of Apple’s success and Xiaomi’s failure

about the chip itself

This chip also provides connectivity and uses less power. Among other things, it works in tandem with an accelerometer and sensors to regulate the operation of the microphone. This is necessary for the user to be able to use one or two headphones, depending on the situation. Thanks to this technology, the user hears music as soon as he puts on the headphones interestingly, this chip is also present in the headphones from Beats, which also belong to Apple.

Each earpiece contains a sensor that works in the infrared spectrum.

It can understand and recognize when the device is in the ear. Interestingly, you can use the Airpods headset with other devices. For example, with an Apple Watch or Mac, provided the latest software is installed. In addition, Apple headphones can be connected to other third-party devices. To do this, you need the device to have a standard Bluetooth player that can sync with the Airpods headset.

The usability of Apple’s headset is obvious. Working in your environment (if you have Apple products) will be as comfortable as possible to use the potential of Airpods. For example, paired with Siri, the headset can help make calls or perform any other actions available to the voice assistant.

Summing up, we can say that such a headset is useful primarily to owners of Apple technology, people who value mobility, autonomy and reliability. Airpods maximize their capabilities when paired with an iPhone.

How Many Bluetooth Connections Simultaneously. iPhone

So, to summarize, you can have up to seven different Bluetooth devices connected to your iPhone at the same time, but in reality, you can have three or four devices connected via Bluetooth at the same time. Typical examples of this would be an iPhone like the iPhone 8 and Apple Watch, a Bluetooth audio device like Apple Airpods, and something else like a Bluetooth keyboard.

Read more:  Xiaomi Mi Robot Vacuum Cleaner 1s Differences

While you can have all of these simultaneous connections for many Bluetooth-enabled devices, you might get into trouble if you have multiple devices of the same type at the same time.

Newer Apple iPhones have Bluetooth 5 capabilities, which offer some potentially interesting changes in the future as more devices will be supported. Bluetooth 5 is not only faster, but also potentially offers the ability to stream multiple audio. As Apple moves its iPhones and iPads to support this even more, this could potentially allow multiple Bluetooth audio connections, especially from Apple Airpods and other similar third-party devices.

You can read more about pairing Bluetooth headphones with iPhone here.

Disable sync in iPhone settings

If you want to no longer duplicate data on incoming and outgoing calls on all your iPhones, you just need to deactivate the unnecessary option in the phone settings:

  • Go to Settings and click on “iMessage”;
  • Scroll down the window;
  • Deactivate the “Calls from iPhone” slider;
  • Restart both devices that are syncing.

For some users, the problem of duplicate calls on iPhone does not disappear even after deactivating the add-on. If this happens, repeat a few more steps:

  • Open the “Phone” window in the Smartphone settings;
  • Click on “Calls through other devices”;
  • Disable call permission.

Synchronization of two Apple devices can occur not only due to the “Continuity” function, but also due to the connection to the same iCloud storage account. To fix the problem, it is enough to make sure that one of the phones does not send data to the cloud:

  • Click on the “Settings” icon in the main menu of the iPhone;
  • Select “iCloud Drive”;
  • Disable the slider next to the option “Allow to store data in iCloud”.

Thus, all the phonebook and dial log data will not be sent to the cloud server and the other device will not be able to receive it. Calls to iPhone and iPad will no longer be duplicated.

Another quick and effective way is to simply turn off the Internet on one of the gadgets. Without access to the global network, synchronization is impossible and the inconvenience with repeated calls will no longer arise.

Please note, even if the slider has already been disabled in one of the functions described above, activate it and then turn it off again. This way, you can eliminate possible errors and failures in the settings, which provoked incorrect work during the synchronization process.

If Airpods won’t charge over the air

If you put the Airpods case on the charger and nothing happens, there are a few things to check:

  • Whether the case is in the center of a rug or stand. This is the most common problem, as some chargers may not work if the case is placed incorrectly. You can find the right place by moving the case on the rug or delivery.
  • Does it need to be charged exactly. Sometimes it will feel like you need to charge the case, however, it holds a charge well even after two days of inactivity.
  • Is the wireless charger connected to the network? This known issue is that the cable is not plugged into the wall outlet or charger enclosure. Check the connection and place the case back on the mat (stand).
  • Is there a protective cover on the case. Remove it, place the case on the charging mat. Some cases may interfere with charging the case.

If you are having problems with wireless charging, make sure the case is centered on the charger. Also check the cable connection of the rug (stand), remove the cover from the case if available.

In case of over-the-air power problems, you can always use the Lightning cable.

When does duplicate calls occur on iPhone??

A call from a phone to a tablet will only be repeated if a number of Continuity requirements are met, namely:

  • All gadgets must be connected to one Apple ID;
  • Connection of devices with one router (single Wi-Fi network) or connection to one access point;
  • Gadgets share the same FaceTime ID.

To deactivate the function, one of the above features must be changed. For example, disconnect the other gadget from your router or FaceTime. Please note that you should not try to change the binding to your Apple ID, otherwise you may lose access to the device. It is recommended to use the ID that you set up initially after purchasing the iPhone.

Connecting Xiaomi Wireless Headphones to iPhone

Today we’ll talk about how to connect wireless headphones to an iPhone via Bluetooth, even if they don’t connect. You will learn about the ways to solve and the problems that arise in this in the article.

Does Xiaomi AirDots Fit Apple iPhone?

The Chinese manufacturer of Bluetooth headphones has guaranteed not only support for Android, but also for iOS. Does this mean that Air Dots can be connected to any phone or tablet under the Apple brand??

Compatibility with iOS devices depends on the Bluetooth version used in phones and tablets. It is known that headphones from Xiaomi began to be released with support for the wireless protocol version not lower than 4.2, and the 2019 AirDots models already have support for Bluetooth 5.0 and Apple’s native AAC codec.

Take the time and check which version of the Bluetooth module your iPhone is equipped with. Owners of the iPhone 6 and 6 Plus, as well as the iPad Air 2 should be especially careful. Initially, these models were released in Bluetooth version 4.0, and support for 4.2 appeared in them later, along with the iOS 9. On other, new models of iPhones, compatibility problems there should be no Bluetooth versions. The fifth version of BT appeared in Apple devices starting with the iPhone 8.

By the way, you will not be able to find out which version of the “blue tooth” on your iPhone programmatically through the “Settings”. In early iOS firmware, this information could be found by opening “Settings” “General” “About this device”. item “Bluetooth”. Now, in this line, an alphanumeric code, which is obscure for a layman, consisting of 6 pairs of values, separated from each other by a colon. For this reason, it is best to check the specifications of your model, which are listed, for example, on the official Apple website, or use other reliable sources.

Let’s take a closer look at how to connect Redmi AirDots to iPhone.

Pairing Xiaomi AirDots with iPhone

Turn on Bluetooth on iPhone (“Settings” “Bluetooth”, slide the switch to the “On” position). Wait for the smartphone to finish searching for compatible Bluetooth devices.

Take the Xiaomi AirDots out of the charging case. If the headphones are in the case, they will not be able to connect to another device by default. Outside the case, they will turn on immediately and the status LED will blink white. Thus, the right and left headphones are synchronized, they are ready to work in pairs.

A new name will appear in the Bluetooth search menu, associated with Xiaomi Redmi AirDots, or it will be Xiaomi Mi AirDots (or AirDots Pro. depending on which headphone model you have).

Radar to detect nearby wireless devices from iPhone works continuously. You may have to wait a bit until the headphones show up in the list. Otherwise, just turn Bluetooth off and on on your iPhone so it finds your Air dots.

Click on “Redmi AirDots_R” and the pairing of the headset and the iPhone will continue to be carried out automatically, you only need to give permission for this connection. When the process is over, the indicator on the headphones will blink white and turn off.

Typically, wireless headphones connect to iPhone without any problem. If you successfully completed this task for the first time, then the next times, as soon as you take the headphones out of the charging case, pairing with the iPhone will be done automatically. At the same time, you need to remember that first you need to get the right (main) earphone out of the case, otherwise, if you take out the left one first, then the mono mode is activated for AirDots. This means that only the left “gag” will work, while on the right, synchronization will be lost.

Connecting AirDots Headphones to iPhone

The Xiaomi brand is known for its high-quality and inexpensive (compared to competitors) smartphones sold not only in China, but also in many countries around the world. Not only mobile phones, but also accessories of this manufacturer are deservedly popular among fans of high-tech gadgets. Many people enjoy wearing Xiaomi smartwatches and fitness bracelets. In this regard, it is also impossible not to mention the Xiaomi AirDots wireless headphones.

Affordable price, attractive appearance and good quality make Air Dots Bluetooth headphones a “tasty morsel” for many smartphone owners. Among them are not only fans of the Xiaomi brand, but also those who are loyal to Apple products. Finally, there are decent models from Xiaomi that can be used with an iPhone or iPad instead of expensive Airpods.

Redmi AirDots controls

In the Redmi AirDots model, instead of touch controls, a physical button is installed on each of the headphones. Pressing a button is accompanied by a clicking sound, which can be annoying if you are immersed in the process of listening to music or watching videos.

Single press the button will pause the playback of a media file or allow you to answer an incoming call, because Air Dots is also a full-fledged headset. However, how smoothly it will work with the iPhone in the case of receiving calls, you need to check. On the forums, many owners of these headphones are not too happy with them when using them as a headset.

Double tap will call the voice assistant Siri (or Google Assistant if the headphones are used with an Android phone).

If you hold down the button for one or more seconds, then you can cancel the call.

Double press the button turns off the microphone when making a call.

Not all users like this primitive control and won’t be able to switch tracks with it. For many, this causes some discomfort, at least at first.

Sound quality

The inconvenience of using the button is compensated by the decent sound quality that these headphones give out. Of course, you shouldn’t expect exceptional sound from these inexpensive “ears”, but for the price it is one of the best specimens on the market. In general, there may be a little lack of bass, but the highs sound crisp and clear. The mids are good too, even when the playback volume is set to maximum. In any case, you can adjust the sound frequencies using the equalizer, which you need to download and install on the iPhone.

These headphones are very loud. If you set the volume level above 70%, then you will not get any pleasure from listening to music. There is another small drawback: if you watch videos (especially videos on YouTube), you can notice a slight lag between the sound and the image.

Regarding Redmi AirDots, we can say the following: they are beautiful and functional, despite their low price. Sound quality is good enough for an inexperienced listener. Music connoisseurs who prefer to deal with audio in uncompressed formats will surely find their drawbacks. Easy connection to an iPhone and the ability to use AirDots for 4 hours on a single battery charge means you can take these wireless headphones with you to work, on a walk, to the gym or on a trip.