Connect Internet To Samsung Tv Via Cable

Search and tune available channels

Having connected the set-top box, we start the search for TV broadcasts:

  1. Go to the tuner menu.
  2. Select the “Search for channels” tab.
  3. Click on automatic search.
  4. Wait for the system to complete the operation.
    Connect Internet To Samsung Tv Via Cable

Check the found channels, if their list matches the one declared by the provider, then the autosearch was completed successfully. If there are not enough channels, then use the manual search, additionally change the location of the antenna.

Signal quality check

You can check the signal by pressing the INFO button a few times. You will find 2 scales on the screen that will demonstrate the quality. The normal indicator is at least 70 percent. If the value is less, then change the location of the antenna. Then check the scale again.

How to connect a digital TV set-top box to a Samsung TV

How to connect a digital set-top box to a Samsung TV. This question arises for many who have recently started using digital TV. Some TV models do not support this format, but this problem is solved by the receiver. In the article, we will consider which TVs need a set-top box, how to choose an antenna and the connection procedure.

Receiver selection

You will find many receivers in the digital market. The main difference lies in the functionality, which determines the cost of the set-top box.

If you have any questions or complaints. Let us know

It makes no sense to give specific recommendations for choosing a prefix. Choose a device according to your preferences, taking into account the financial component. But, do not buy a too cheap receiver.

We connect to the old TV

Connecting to old Samsung TVs is not difficult. The difference lies in the connectors. You can use SCART port, antenna input or RCA.

Most common connection problems

Common problems include the following problems:

  • The image is rippled or you see squares on the screen. The reason lies in poor signal reception. Check cable for damage and correct connection.
  • The image is black and white. You probably plugged the cable into a different connector. Also go to the receiver parameters and in the “Image” section set the automatic setting.

Click here to learn how to connect an N, M, Q or LS series TV

To connect the TV, first set up the Internet on the router. How to do this, you can ask your Internet provider.

Connect the cable to the LAN connector of the TV. If you are connecting via a router, insert the cable from the provider into the WAN connector of the router, and then another cable into the LAN connector on the TV and router.

Enter the TV menu: press the Home button and select Settings on the TV screen.

Select General.

Select Network.

Select Open Network Settings.

Select network type. Cable.

Wait for the TV to connect to the Internet.

Click OK to finish setting.

2. What connection methods are there

  • Direct connection. The cable from the provider is immediately inserted into the TV. This method will not work if you need a login, password or server address to connect to the Internet.
  • Connection via a router (recommended). The cable from the provider is inserted into the router, and then the TV is connected to the router. The method works with any type of Internet connection.

3. How to connect a TV by wire

Below you will find instructions for the various Samsung TV series.

Click here to learn how to connect an R-series TV

To connect the TV, first set up the Internet on the router. How to do this, you can ask your Internet provider.

Connect the cable to the LAN connector of the TV. If you are connecting via a router, insert the cable from the provider into the WAN connector of the router, and then another cable into the LAN connector on the TV and router.

Enter the TV menu: press the Home button and select Settings on the TV screen.

Select General.

Select Network.

Select Open Network Settings.

Select network type. Cable.

Wait for the TV to connect to the Internet.

Click OK to finish setting.

Click here to learn how to connect your J-series TV

To connect the TV, first set up the Internet on the router. How to do this, you can ask your Internet provider.

Connect the cable to the LAN connector of the TV. If you are connecting via a router, insert the cable from the provider into the WAN connector of the router, and then another cable into the LAN connector on the TV and router.

Enter the TV menu. Depending on the remote control model:
press the Menu button

Or press the Menu / 123 button and select Menu on the TV screen.

Select Network.

Select Network Settings.

Select network type. Cable.

Wait for the TV to connect to the Internet.

Click Close to complete the configuration.

Click here to learn how to connect your K-series TV

To connect the TV, first set up the Internet on the router. How to do this, you can ask your Internet provider.

Connect the cable to the LAN connector of the TV. If you are connecting via a router, insert the cable from the provider into the WAN connector of the router, and then another cable into the LAN connector on the TV and router.

Enter the TV menu. Depending on the remote control model:
press the Menu button

Or press the Home button and select Settings on the TV screen.

Select Network.

Select Open Network Settings.

Select network type. Cable.

Wait for the TV to connect to the Internet.

Click OK to finish setting.

Via Wi-Fi

How to connect a modern TV to the Internet via a cable was discussed above. But this is not the only way to get the opportunity to use the Internet on TV. You can also do without laying wires around the apartment using a wireless connection. To connect the TV to the Internet (wireless) via a router, you need a minimum of steps, provided that the device has a Wi-Fi module. Before making the configuration, you will need to prepare information about the name of your network and remember the password for it. Further, taking the remote control in hand, with the device turned on, do the following:

  1. Turn on the device and go to the menu by pressing the desired button.
  2. Next, in the settings you need to select “Network” and “Network Settings”.
  3. Then select the type of connection, in this case. Wireless.
  4. The device will start searching for the Web environment, and after a short period of time it will display a list of it (it will display, in addition to yours, the networks of neighbors if you live in an apartment building).
  5. Select your network, and after pressing the “Ok” button on the remote control, you will need to enter the password in the appropriate line. After a moment, a window will appear with a message that the connection has been established and the power on has been successful. If it doesn’t, find out why the TV won’t connect to Wi-Fi.

On Samsung Smart TV

To connect the Internet, cable or wireless, to a Samsung TV, you can use the instructions for the same LG device. The connection steps and the diagram are not much different, except for the names of the items in the menu (the meaning is easy to guess about the purpose of the buttons). But there are some differences in setting up Smart TV on Samsung TV:

  • After connecting to the Internet, try to enter the Smart Hub menu by pressing the corresponding button on the remote control;
  • To test the Internet and Samsung smart TV for operability, you need to run some application, for example, YouTube.

If you managed to connect the Samsung TV to the Internet, and everything worked, then you can relax and start installing various kinds of applications from Samsung Apps, and enjoy watching and Internet TV.

Direct connection

If a router is not provided in the house, and the Internet is needed only on TV, then the Internet cable laid in the apartment by the provider should be immediately inserted into the TV by analogy as described in the previous paragraph.

If the provider uses the dynamic IP address technology, synchronization will be performed automatically. If the technology uses a static IP address, then after connecting, you will have to open the “Network” item in the TV settings and select “Manual setting”. Next, we register the parameters of our connection. IP address and DNS. This information can be obtained from the provider or searched in the service agreement. As a rule, a sheet with settings is issued with it.

Some providers bind the connection to the MAC address of the device. In this case, having a PC connected to the Internet in the house, it will not work to connect the TV to it. You need to contact your provider and ask to change the associated MAC address to the one assigned to the TV. To do this, go to its settings and find the “device support” or “product information” tab. The list of information will also indicate the MAC address. We rewrite it and inform the provider, after changing the address, we make the connection according to the above methods.

Settings for Smart TV

How to connect the Internet in different ways on the TV is now clear, but for the full use of the capabilities of Smart TV, just one connection to the World Wide Web is not enough.

Connection in newer TV models

The overwhelming majority of modern television sets have built-in capabilities for joining the World Wide Web. All that is required of you is to correctly connect the device and configure the Internet. In practice, there are 2 ways to connect:

  • Wireless connection of the device via Wi-Fi;
  • Connection using a network cable.

over, the second option can be implemented both with the use of a router (router), and without it.

We connect the TV receiver to the Internet

Today, Internet access is implemented on many devices, and the TV is no exception. The easiest way is to connect new models of TV receivers to the Internet. They have built-in Wi-Fi modules, and the setup is intuitive. However, you can also connect to the Internet on older devices using a cable connection and special external smart set-top boxes. Read more about the various ways to go online through the TV. In the material below.

Connect internet to samsung TV via cable

Most modern TVs have ceased to be just repeaters of analog or digital television, they have such features as Smart TV, communication via Skype and much more. But most of the new features that have emerged are based on one paramount. Internet access from the TV. It is thanks to the Internet access that you can fully use Smart TV, watch movies from the Internet, chat on Skype, add and use other TV functions. How to set up the Internet on a TV is the primary task that arises immediately after purchasing it. In this article, I will show in detail how to connect a TV (suitable for any TV. LG, Philips, Samsung, Sony, etc.) to the Internet using a LAN cable.

1 With a network cable;

2with a Wi-Fi wireless connection.

In this article, I will describe the first method in detail. The main advantage of this method is that you will have practically no loss of Internet speed, unlike a wireless connection. This is especially important if your internet speed is slow. And the minus is that it is necessary to pull the network cable to the TV, BUT it is not at all necessary to do this, since there are technologies that allow the transmission of network packets over the power network, described in more detail in the article Internet / local home network through an outlet. Homeplug AV technology.

Connecting a cable to a TV is not as simple as it might seem the first time, because you need to understand where this cable comes from, where one of its ends is connected. And there are two possible options:

1 The network cable is connected to the router;

2 The network cable comes from the entrance (provider cable).

Let’s take a closer look at each of the options.

Connecting the TV to the Internet with a network cable from the provider.

This method does not require any additional devices and at first it may seem that everything is simple, but this is not entirely true. The thing is that providers use various connection technologies, for example PPPoE, L2TP, Dynamic IP, Static IP. The settings that need to be made on the TV in order for the Internet to work there depend on what technology your provider uses. You can find out what technology your provider uses by looking at the agreement with the provider or by calling technical support. Next, I propose to disassemble each of the connection technologies:

Dynamic IP. If your ISP uses a Dynamic IP, a minimum of effort is required from you:

1 Connect the network cable of the provider to the TV;

2 Make sure your TV is using Auto search for network settings.

For example, I will describe how to do this on LG TVs with webOS.

Press the “Settings” button on a regular remote control.

If you have a remote magic, press the “Input” button.

Select the gear icon.

Then select “Network”. “Ethernet wired connection”. There you should see the inscription “Connected to the Internet”, if so, then congratulations, you have configured the Internet on your TV.

If you have the inscription “No Internet connection via Ethernet”, select this connection and make sure that it is set to automatically receive network settings.

Static IP. With this connection method, you need to find out from the contract with the provider your network settings and register them in the TV settings. We do everything in steps:

1 Connect the network cable of the provider to the LAN port of the TV.

2 Go to the TV settings and register the network settings of the provider.

For example, on LG TVs, press the “Settings” button, select from the menu. “Net”. “Wired Ethernet Connection”,

Then click the “Change” button.

Uncheck the “Automatic” box and write down the IP address, mask, gateway, DNS issued by the provider.

Pppoe, L2TP. Unfortunately, very few TVs allow you to configure the Internet if your ISP provides the Internet using PPPoE, L2TP technologies. And for most, the way out of this situation is to use a router to connect the TV to the Internet.

Setting up the Internet on the TV when connected via a router.

For this method, it is necessary that the Internet has already been configured on the router (you can find how to configure the router in other articles on our website). Connect one end of the cable to any LAN port of the router.

The other end of the cable to the TV.

Go to the TV settings. On LG TVs, for this, on the usual remote control press the “Settings” button

Or the “Input” button on the remote magic

And select the gear icon.

Go to the “Network” menu. “Wired Ethernet connection” and make sure that below this label says “Connected to the Internet”.

If this is not the case, check that the TV would receive the network settings automatically by selecting an Ethernet connection. Click the “Change” button.

And check the box “Automatic”.

Thus, without much effort, using a LAN cable, you can set up the Internet on any TV (LG, Philips, Samsung, Sony, etc.).

Immediately after setting up the Internet, I recommend updating the firmware on your TV: