Changing HP printer cartridges. How to Make Generic Ink Cartridges Work on an HP Printer

When To Replace A Printer Toner Cartridge

It seems like an easy enough question to answer. Once the “toner running low” alert flashes on, it’s time for a new cartridge, right?

Not quite. There are actually several factors to consider before making the switch—and understanding exactly what these factors are can save your business a surprising amount of money. Over time, these savings can easily reach into the thousands!

When To Change The Toner

If you don’t have a managed print partner, it’s up to you to know when to replace your office printer’s toner. Most of the time, the default setting alerts users when toner supplies are running low. Usually, this goes off when about 10%-20% of the toner supply remains.

This little reminder is better than nothing. However, it’s often not the most financially sound advice for your machine. That’s because, depending on the printer and the type of toner cartridge, there could be thousands of pages or months of toner remaining before it’s really “out.”

So, if you are paying out-of- for your toner cartridge, you’re basically throwing money away if you swap them out too early.

How Much Time Do I Have Left On My Cartridge?

Before deciding when to change your toner, consider what type of toner you have in your printer. Since different types of toner can last longer or shorter than others, this can help you estimate when a switch is due.

There are three standard types of toner:

  • Acompatible cartridge is a remanufactured (think recycled) cartridge. It will likely have the lowest cost of the three, but the highest likelihood to dry up early or be defective. This is a great option if you’re looking to save money.
  • The standard cartridge is your run-of-the-mill cost savings cartridge. It typically gives you about 10,000–12,000 pages. For a home user that doesn’t print constantly, this is a great option.
  • The high yield (sometimes called a jumbo cartridge) is the preferred cartridge option for most corporate printers. For busy offices, they’ll give you the most bang-for-your-buck and offers upwards of 25,000–40,000 printed pages.

Also, do note that the actual size of the printer cartridge is directly related to the printer’s yield. A standard yield cartridge will appear smaller in size than a high yield version. The high yield will also fit more snuggly into your printer, but I assure you that it will fit your printer just fine. For more on the differences between standard and high-yield cartridges, as well as why choosing the right one can save you money, check out this blog.

Ok. Now for how to save some money!

Rather than just swapping out toner as soon as the alert light starts flickering, use that as the sign to start keeping a close eye on when to change your toner. Remember, you probably still have about 10–20% of the cartridge’s toner left. Tossing it now would be like burning up your hard-earned money. You’ll know it’s finally time for a replacement once the printed pages start to become streaky, lighter, or obviously of lower quality.

Instead, take note of approximately how many jobs are being completed. Say you’re using a high-yield print cartridge—once you start getting close to that 10% mark, or around 2–4,000 pages, start really looking for those signs that the cartridge is finally running dry.

Or, if you have been given control of the administrative settings on your devices, then you can also print a supply status page directly from your printer. The supply status page will list statistics including the percentage of remaining toner, page counts left for the cartridge, etc.

After checking the status, if the pages remaining on the toner exceeds the number needed to complete your next print job, then you are safe to print without concern.

The Exceptions to the Rule

Like with anything else, there are always exceptions to the rules. So, even if you’re doing all of the right things when it comes to maintaining and exchanging your toner cartridges, things can still go wrong.

One common issue is those times when cartridges run out earlier than expected, or without warning. This kind of cartridge failure does happen, and it’s not something you can accurately predict. Unfortunately, defective cartridges sometimes just happen.

Think this might be happening with your printer? We suggest visually inspecting your most recently printed pages. If your print jobs have been consistently printing too light, then the cartridge probably has reached the end of its life even if it seems to too, or whether the alert light is on or not.

To prepare for this occasional—but potentially headache-inducing—problem we always recommend having a backup set of toner on hand. You can order extra toner cartridges on your own, or if you have a print management partner, they should be happy to ship a backup set.

Do keep in mind that toner quality diminishes while on the shelf. Therefore, we would not recommend replacing a set of toner that has been in storage for six months or more as it will increase the likelihood of running dry early.

How Can a Print Management Service Help?

Generally, you should start paying close attention to your printer once its toner levels reach about 10%. This means looking for those too-light print jobs or low toner alerts while regularly checking printer status pages.

As you can imagine, or know firsthand, this can be a time-consuming process. Especially if you’re trying to save money by using every last drop of toner, you’ll have to keep an eagle eye on your printers—and don’t you have way more important things to think about?

That’s one reason why working with a professional managed print service, or MPS, can be a fantastic partnership. Rather than worrying about replenishing the toner inventory or watching its levels, the MPS provider will it for you.

Most MPS providers have a general rule of thumb to auto-replenish toner when supplies read 10% via their own data collection agent. This agent provides an hourly read of your printer’s supplies and delivers that data to the MPS. When supplies hit 10%, the managed print service will receive an alert that it’s time to ship you a new cartridge.

The only exception is for critical print devices which are usually shipped at 30%. Though any customer can ask for their machines to be considered critical, this usually applies to devices that fly through toner much faster than average. Any great managed print partner would rather have their toner arrive early than late.

With an MPS provider keeping an eye on your precise levels, they’ll inform you when it’s the perfect time to change out your toner. That way, you’ll always have the highest quality prints while saving as much money on your toner and print costs as possible.

Curious to see if a managed print service could be the right fit for your business? The team at imageOne would love to talk! Just book a 15-minute, no-obligation consultation with one of our friendly reps and we’ll discuss how we can help your business boost efficiency and save money.

How to Make Generic Ink Cartridges Work on an HP Printer

Is your HP printer won’t recognize the new ink cartridge? It won’t if you’re using a generic ink cartridge. HP aims to stop consumers from using generic ink cartridges by making them incompatible with their printers. That way, consumers will have no other choice but to go with genuine HP ink cartridges despite being significantly more expensive than generic ones.

Save as much as 75% on HP Printer Ink. Buy Now!

Why Your HP Printer won’t Recognize New Ink Cartridge

HP has launched what is called a cartridge protection setting on its genuine ink cartridges. This system locks original ink cartridges into a specific printer so you won’t be able to use them with a different printer. If you own an HP OfficeJet Pro 251dw printer and decide to purchase a brand new HP OfficeJet Pro 8600 ink printer that uses the same HP 950 and 951 cartridges, you won’t be able to use these cartridges in the new printer since they are locked to your old one. With that being said, you won’t be able to refill, recycle, or remanufacture the cartridges for use in a different printer because HP and its cartridge protection system won’t allow it.

Save ! Buy Compatible Ink Cartridges for your HP Printer!

HP OfficeJet Pro 251dw

HP 950XL 951XL Cartridges

HP OfficeJet Pro 8600

Why You Want to Disable HP Cartridge Protection

It makes no sense to have such a restrictive cartridge system. Some of the reasons why you may want to disable the HP cartridge protection include:

  • You’ll be prohibited to use refilled or remanufactured HP ink cartridges
  • You won’t be able to use the ink cartridges on a new printer if they have already been loaded to your old one.
  • You can’t recycle your ink cartridges which means they will end up as trash once they are empty
  • HP’s cartridge protection setting can sometimes work against brand new genuine or started cartridges as reported by some users.

Fortunately, there’s a way to disable HP cartridge protection and make generic ink cartridges work on your printer. And the good news is it’s relatively easy to do on your own even without any technical know-how.

How to Disable HP Cartridge Protection

Disabling the HP cartridge protection on your printer can be done in a few easy steps. If your printer doesn’t come with internet features, here’s how to do it.

  • From the Printer menu, go to Printer Settings
  • Find the option that allows you to disable HP cartridge protection
  • Select the disable option
  • Click Apply and Save if necessary

If your HP printer comes with internet features, however, follow these steps:

  • Open a web browser and type in your HP printer’s IP address on the web address. Note: You can find your printer’s IP address by going to your Printer Settings and then making your way to Network Setup options.
  • Your printer’s Embedded Web server opens. Go to Settings and then HP Cartridge Protection.
  • Select Disable HP Cartridge Protection
  • Click on Apply or Save

Disable HP Cartridge Protection from Your Windows PC​

  • Go to Control Panel and select Printers and Devices
  • Locate and right-click on your printer on the list
  • Select properties followed by the software tab
  • Select properties followed by the software tab

How Do You Trick HP Ink Cartridges?

Aside from disabling HP cartridge protection, you can also trick HP ink cartridges into working with a different printer. Thus, even though the ink cartridges are already locked on your old printer, you can still use them with a brand new printer with these steps:

Remove the new ink cartridge and reload the old ink cartridge back into the printer.

Wait for about 10 minutes before you proceed to the next step.

Remove the old ink cartridge and install the new ink cartridge again.

Your HP printer should be able to recognize your new ink cartridges by now. If it still doesn’t, try these alternative steps instead:

Remove the new ink cartridge from the printer.

Please turn off your HP printer and detach its power cord for 10 minutes.

Reconnect the power cord but don’t turn on the power button just yet.

Reload the new ink cartridge back into the printer.

Can You Use Remanufactured Ink Cartridges in HP Printers?

Remember that printer manufacturers like HP are prohibited by law to prevent you from using compatible or remanufactured cartridges in your printer. Nevertheless, they have successfully got around the rules by devising clever systems like the cartridge protection setting, which renders generic ink cartridges useless.

But you may prefer using generic HP ink cartridges over original HP ink cartridges as they are cheaper while generally offering comparable print results. If such is the case, disable the HP cartridge protection or trick HP ink cartridges using the steps above.

Frequently Asked Questions

It will depend on what type of “other” ink cartridge you intend to use on your HP printer. If it’s a third-party or generic compatible/remanufactured ink cartridge of the same model number, then yes, it will work. Sometimes, you will encounter some error message warning indicating your use of a none-OEM ink cartridge. If this happens, just hit “OK” to bypass the message and continue printing using your generic ink.

If you’re using a different brand, then it won’t work. You can’t use Canon ink cartridges to replace HP ink cartridges and vice versa. You also can’t interchange different ink cartridge models, even if they are from the same brand. Thus, you can’t use HP 301 inks in an HP 304 printer even if they’ll fit. The printer will display an “inks not recognized” message and the like, and there/s no way for you to bypass it.

If you want to save time and money, buying ink cartridges online is the way to go. There are plenty of advantages when purchasing online, from cheaper to easy ordering and speedy delivery. On top of that, most printer ink cartridge shops online offer free shipping and discount coupons and offers.

Nevertheless, there are a few risks when purchasing from an online vendor, especially if you’re not familiar with it. Some don/t always deliver on their promise of quality and performance for a lower price. Research is key when finding legit vendors like YoyoInk.com, who offer the best price and quality.

Although there are numerous ways to deal with this problem, most of the solution lies on your ink cartridges. And more often than not, the problems are easy and require simple fixes that you can do independently. Try following any of the three potential solutions to common ink cartridge problems below.

  • Clean the ink cartridge contacts. One of the common causes of a “Cartridge Problem” message is a dirty or damaged gold contact on the cartridge’s electronic chip. First, to remedy this problem, remove the problematic ink cartridge from the printer and find its chip. Please make sure the gold contacts on the chip are clean by wiping them down with a lint-free cloth. Try using an alcohol-based cleaning solution or cartridge flush to remove any dirt or residue trapped in the contacts.
  • Clean the contacts inside the printer. If the problem persists even after cleaning the ink cartridge contacts, then you may need to clean the contacts inside the printer as well. Open your HP printer, find the contacts inside and then with a clean lint-free cloth. Some of the contacts are facing upward or pointing up, so I recommend that you be careful to ensure that there are no bits of cloth left on the contacts after cleaning.
  • Try using another cartridge. There’s a chance that the ink cartridge itself has some electronic problem that’s invisible to the naked eye. If this is the case, the only option is to try using another ink cartridge. Install a new ink cartridge, or an old one that you know has been working properly and see if it works.

If you’re using a compatible or remanufactured HP ink cartridge, you can sometimes fix this problem with a simple firmware update. If you have tried all of the suggestions mentioned above and have done a firmware update but to no avail, then you may need the help of an expert. It may be best to contact an HP or printer technician to get some answers about how you can deal with the issue.

Yes, you can use generic ink in HP printers. Try to disable the HP Cartridge protection as this will help with preventing the printers from being blocked with updates. On the printer menu, go to settings and you will see an option there for you to disable it. Choose the “disable” option then click Apply and Save.

How to Reset an HP Printer After Refilling With Ink

An HP printer is one of the most cost-effective investments you can make for your home or office. They are famous for their excellent quality in printing, which HP has built up for over 50 years. The company continues to innovate with features like high-resolution printing, faster print speeds, and faster wireless connections.

However, HP printers are far from perfect. Although you can refill cartridges with ink to cut costs, the printer may not recognize them when they are re-installed. As a result, you could end up delaying important print work even when you have everything your printer needs.

Luckily, resetting your printer after a refill will almost always get you back on track. But how can you do it?

This article will show you how to reset HP printers after refilling with ink.

How to Reset an HP Printer After Ink Refill

Refilling HP cartridges is an inevitable chore if you own one of their printers. While some cartridges will work without problems after using a refill kit, some models require a hard reset. This is because the printer may not detect the newly filled cartridge. Sometimes you may even encounter a “third-party cartridge detected” error message even though the refilled cartridge is a genuine HP product. This can be pretty frustrating.

HOW TO BYPASS HP PRINTER CARTRIDGE 🙂 REFILLABLE CARTRIDGE (LOW INK OR EMPTY INK NOTIFICATION

Whenever this happens, resetting your printer should be first on the list of your troubleshooting options. And the good thing about it is that it can also work if you’ve replaced HP cartridges with some other compatible option from another vendor.

You can reset your HP printer in two ways. Let’s see how each method works.

Tape Method

This method works by covering the cartridge contacts used to gauge the ink level. The goal is to restore ink level monitoring. Here’s how to go about it:

  • First, ensure that you can see the contacts of your cartridge by turning it over. After that, turn the cartridge around so that the contacts are on the lower side.
  • Cover the contacts on the top left corner of your cartridge with a piece of tape.
  • At this point, insert the cartridge back in the HP printer and immediately print an alignment page. By default, the printer may display a message suggesting that the cartridge has problems. You can ignore that as it won’t affect the reset process.
  • After the alignment is complete, remove the cartridge once again but leave the tape in position.
  • Next, cover the contacts on the top right corner of your cartridge with tape.
  • Reinsert the cartridge and proceed to print an alignment page. As before, ignore any error messages your printer displays in the process.
  • After that, remove the ink cartridge.
  • Without removing the tape that’s already on the upper side of your cartridge, tape the lower-left corner.
  • Insert the cartridge back in the HP printer and print an alignment page yet again.
  • After the alignment, remove the cartridge and then take off all the pieces of tape on it.
  • Reinsert the cartridge. Your printer should now indicate that the cartridge is full.

Swap Method

This method uses several empty cartridges to erase your printer’s memory. Here’s how to do it:

  • Place the refilled ink cartridge into the printer.
  • Proceed to print out an alignment page. If the printer displays an error message, ignore it because it won’t affect the reset process. At this point, the ink level will still be at the pre-refill level.
  • Safely remove the ink cartridge from your printer.
  • Take one of your old compatible cartridges and proceed to print out an alignment page. The printer will detect that there’s a new cartridge.
  • Remove the second cartridge.
  • Insert yet another cartridge from your old stock and then print an alignment page. The printer will erase the memory of the second cartridge and now recognize the third cartridge.
  • Insert a fourth cartridge from your old stock and print an alignment page. The printer will erase the memory of the third cartridge and now recognize the fourth cartridge.
  • Finally, insert the current refilled cartridge into the printer and run the alignment. Your printer will now detect the cartridge as full.

What HP Printer Models Will This Work For?

Cartridge refill problems are relatively common. Although there may be specific ways to deal with this in some of the latest models, these reset methods work well across both the old and the new generation HP printer models.

Low ink level is a situation that can make any HP printer owner worried if they don’t have a replacement at hand. Being unable to use a full cartridge because the printer doesn’t recognize it is even more frustrating. However, a hard reset using any of the methods discussed should solve the problem.

Be that as it may, it’s important to complete a hard reset of your computer as quickly as possible because your cartridges should not be disconnected from your printer for more than 30 minutes. If that happens, the ink may dry and clog the nozzles. After removing all cartridges, remember to wipe down any excess ink before reinserting them into their slots.

Have you tried resetting your HP printer after refilling with ink? How did it go? Let us know in the Комментарии и мнения владельцев section below.

How To Reset an Ink Cartridge [Regardless of Brand]

It’s a fact jack: Sometimes ink cartridges stop working even when they’ve still got ink left inside.

Worse yet, when one color quits working the entire inkjet shuts down, even if you only need black text. Arrgh!

We’ll show you how to handle a pesky printer ink cartridge, regardless of brand and model. Read on

How To Reset Ink Cartridge

Psst! Want to know the secret to resetting the chip on an ink cartridge?

Here’s how to reset ink cartridges, regardless of brand.

  • Locate the chip. It’s a tiny green circuit board about the quarter of the size of a postage stamp. They are often located on the front or bottom of your printer cartridge.
  • Bend a paperclip. You know the trick. You’ve been bending paper clips to solve computer problems since the days of floppy disks! In case you don’t know, simply find a sturdy paper clip and bend one leg out straight. This makes a perfect “poker” for getting inside those tiny buttons and eject ports that can be found on nearly all modern electronics. The stiff wire of a bent paperclip is perfect for resetting the chip on your ink cartridge.
  • Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won’t harm the cartridge so do it anyway just to be safe.
  • Done. Replace the ink cartridge in your printer and check the ink level monitor. It should read 100% full.

So now you know how…but why?

What are these weird green things and what do they do?

The answers to these questions and more lie ahead.

Low Ink and Ink Level Basics

Most printer models use ink cartridges that have a chip built into them.

V1.3 Turn off Chip Info for HP Printer with LED Panel made after 2016

This chip monitors the ink level inside the cartridge.

But the memory of these chips are notoriously not very accurate.

This is why you will sometimes get an error message that says you are out even when there is printer ink remaining.

When your ink is low, you will see a warning indicator light on the printer’s LCD screen.

In some cases, printing activities may stop if the cartridge is empty.

You will need to turn the printer’s power off, remove the empty, and replace it.

Once the cartridge is replaced with fresh ink, you can restore your printer’s power, turn the machine on, and resume printing.

What An Ink Cartridge Chip Does

The chip serves a couple of functions.

It tells the printer what color ink is printing and verifies that it is a usable cartridge.

If you’re an inkjet printer owner, you may want to consider resetting your ink cartridges whenever you get low ink warnings.

Clearing the memory can give you a more accurate idea of your printer’s ink levels, the number of pages still available to print, and other valuable printing information.

You want your ink level monitor to be correct.

You wouldn’t drive a car with a faulty gas indicator gauge. That’s an error in judgment!

Don’t make the same mistake with your printer’s ink levels. (If you stain your hands or clothes while refilling, turn that frown upside down! Here’s how to clean up!)

Hey, Where’s That Button?

Just above the circuit board on most printer cartridges, you’ll find a small button.

You’ve seen these tiny buttons before on cell phones, phone chargers, etc.

This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).

In addition, keep your printer well maintained for best printing results.

Using A Chip Resetter For Epson and Others

Some ink cartridge chips must be reset electronically.

Many third-party companies sell electronic chip resetters. You can buy third-party ink cartridge resetters for almost any ink cartridge.

This allows you to refill these cartridges and reuse them in your printer.

If you buy a resetter for your ink cartridges, we suggest a USB-powered model.

Some of the battery-powered models may not have enough voltage to fully reset your cartridge, whereas you’ll never have to worry about a power supply if you have a USB-powered resetter.

Chip technology today has become much more advanced.

Print manufacturers do not want you to refill your cartridges — they want you to buy new ones from them.

Therefore they’ve designed chips that are individually coded for each printer.

This does not allow you to reuse the same cartridge in your printer even if you refill it and reset it.

The printer will not recognize a chip that has been previously used.

This is true for several models of Epson photo printers.

Unlike Epson printers, however, Canon photo printers allow you to refill the ink and reset the cartridges.

Resetting Epson Ink Cartridges

Many Epson chips can be reset using a software-based resetter. Bonus — many are free to download! Once reset, your printer thinks the ink is full.

Once you open a software-based resetter, prompts on-screen will walk you through the steps to reset your Epson cartridges.

Some Epson cartridge resetters are physical devices that you actually insert the cartridge into and they electronically reset the chip.

You can pick up a resetter for Epson and other brands online for between five and 20.

There are different receptors for different printers, so make sure you shop around and use your correct model number.

To use a physical chip resetter, simply press the four contacts on the chip against the contacts on the resetter.

On most receptors, a light will flash and then go solid green letting you know the reset is complete.

Pop that cartridge back in your Epson and check your ink levels.

If all goes well, they should show 100% full!

How To Reset Epson Ink Cartridge Chip Without Resetter

Hey, you can reset Epson ink cartridge without resetter!

As shown above, you can reset Epson chips by pressing and holding the button above the chip with a bent paper clip for 10 seconds.

Resetting HP Ink Cartridges

HP printers are famous for refusing to accept third-party cartridges. But there are workarounds.

The contacts on an HP chip are strange.

They lean towards each other like that tower in Pisa, almost touching towards the top.

Regardless, locating the contacts that control the color ink level settings is fairly easy.

After refilling your cartridge, cover the blue ink level contact with a small piece of tape.

This is the uppermost contact atop the second column of contacts from the left.

Put the cartridge in, let the printer read it, then take it out again.

Move the tape from the blue contact to the red contact.

Take a small piece of adhesive tape and cover the red contact. This is the uppermost contact on the second column from the right.

Make sure the tape only covers the surface of the contact (the tiny copper square you’ll find on the green circuit board).

Insert, read, and remove the cartridge as before.

Repeat this process with the two green ink level contacts located just below the red contact and beside it, atop the first column on the right. (These contacts are in green in the diagram above.)

Check your ink levels after the printer is allowed to run through its cycle again. They should be 100% full.

How To Bypass HPs “Used or Counterfeit Printer Cartridge” Error

Did you ever get a flashing “Used or Counterfeit Printer Cartridge” message on your HP inkjet following a compatible cartridge install?

Yeah, we hate that. As already mentioned above, HP inkjets are famous for refusing to accept third-party cartridges.

However, here’s how to bypass that flashing message.

In the Windows operating system:

  • Open Devices and Printers
  • Select the active printer
  • Click on HP Printer System
  • Click the Maintain Your Printer tab
  • Click the HP Cartridge Protection tab
  • Click off the Disable HP Cartridge Protection button
  • Click ok to save settings

Resetting HP Toners

You can reset your HP laser printer toner cartridge too.

Sometimes laser printers report low or empty toners sooner than they have to.

In fact, your old laser printer cartridge might still have some powdery pigment inside of it.

If the toner cartridge feels heavy when you take it out, you may not be due for a refill just yet.

  • Try an ink-saving mode. Most HP printers will prompt you to switch to low-toner prints once they detect low toner levels.
  • Shake your cartridge. The first thing you should try with an HP LaserJet cartridge that’s supposedly empty. This old-school trick will free up the toner particles that are stuck to the inside walls and nooks. After you mount it back to your printer, it may register it as full. You may need to deactivate the ink-saving mode for the printer to detect toner levels properly.

Due to HP’s clever 128-bit encryption, page number resetters for HP toners are nearly non-existent.

However, if it turns out your HP laser printer needs a refill, you can bypass HP’s Smart OEM toner detection.

  • Turn off toner level monitoring on the printer. This will allow you to use a refilled toner despite the chip reporting it as empty.
  • Install an HP chip to a replacement cartridge. This requires some fine motor skills and good tools. You’ll also possibly need to turn off toner level monitoring on the printer.

Get an aftermarket chip for a refilled cartridge. The majority of modern HP toner cartridges are equipped with a small chip that communicates toner levels to the printer.

As already mentioned above, HP cartridges come with a clever encryption that doesn’t allow page resetting.

That means that you’ll need to do a lot of handiwork to get a refilled or off-brand toner to work in your LaserJet printer.

In the case of HP JetIntelligence toners like HP 414A, refilling and resetting the cartridge might not be worth your while.

Consider getting OEM toner instead.

Resetting Canon Ink Cartridges

Canon printers have thermal printheads. The ink actually cools the print heads down, and if you run empty cartridges the print heads can overheat and get damaged.

There’s a trick we’ve seen that could help here.

But you will need four OEM Canon cartridges — filled or empty — to pull this trick off.

Canon printers can only remember four different chip serial numbers.

So, if you replace and remove the four Canon cartridges, and, on the fifth attempt, install a newly refilled cartridge, the printer should accept the cartridge, and ink levels should read as full.

If you get Error 5200 on your Canon printer you can try some of our other solutions.

How to Reset Canon Pixma Ink Cartridge

In many cases, you can press and hold the “ok” or “resume” button on the front of the printer for about 10 seconds.

This prompts resetting Canon ink cartridge and should allow you to continue printing.

How to Reset Samsung Toner Chip

There is a strange situation going on with the drum units inside Samsung laser printers.

The drum units are “programmed to fail” and stop working after a certain number of pages.

You can get a little more life out of your drum unit — and get rid of that error message — by resetting the chip on the end of the drum unit.

Behind that chip are two resistors — a flimsy 56K ohm and a meaty 200K ohm.

Replace the 56K ohm resistor and the printer will see the drum as new and restore the page count back to zero.

How To Reset Brother Ink Cartridge Chip

When you get the big red “X” on the LCD display of your Brother printer it means it’s time to replace the cartridge.

Or, you can refill and reset the chip.

You can use a chip resetter to reset the chips and buy your non-OEM ink from a reliable distributor.

Also, Brother printers will sometimes tell you the ink is empty when you can clearly see liquid left in the cartridges.

These cartridges have a little clear node on the front.

The printer uses a sensor to look for ink inside this clear nodule.

If it doesn’t see ink it will give you an empty ink cartridge message.

The quick fix is to simply cover that sensor with a piece of black electrical tape.

The printer’s sensor sees a solid color and reads 100% full ink!

How To Reset Lexmark Ink Cartridge Chip

First, open the printer’s access cover and wait for the ink cartridge carriage to come to a stop.

Install the new ink cartridge and close the printer’s access door.

Second, wait for the printer’s ink monitoring software to detect the new ink cartridge.

You’ll get an error message warning you the cartridge is not a genuine OEM Lexmark cartridge.

Next, click on the option on the ink monitoring software that lets you proceed.

Another warning will pop up on the printer’s screen detailing that you are using refilled or third-party cartridges and may void the printer’s warranty.

changing, printer, cartridges, make, generic

No worries. Click ok and proceed.

Each time you install a refilled or third-party cartridge you will need to follow the on-screen instructions to disable the Lexmark ink monitoring software.

Remember, since the monitoring software is not functioning it will not know your ink levels. Don’t run dry!

Show Your Printer Who’s The Boss With A Hard Restart!

Sometimes you have to get physical.

Perform a hard restart by unplugging the power cord from your printer.

Press and hold the printer’s start button for at least 10 seconds to reset your printer.

Send a print job to the printer before you plug it back in.

Once the print job has been sent to the machine, plug it back in and your printer should override the ink cartridge settings.

Conversely, you can select and hold the power button which will restart your printer.

Cash Out Your Surplus Office Supplies

At some point you’re going to find yourself with extra ink and/or toner cartridges.

Maybe you got a new printer and you’re stuck with leftover supplies.

Maybe you ordered the wrong printer cartridges and forgot to return them.

Either way, you can turn your extra printing supplies into cash with Cash 4 Toners. Visit us online…we want your leftover ink and toner cartridges!

0 Комментарии и мнения владельцев on “How To Reset an Ink Cartridge [Regardless of Brand]”

Kerry

August 21, 2021 at 3:19 pm 4 hours later and it all came down to a paper clip! I had tried everything. Thank you. Reply

Rob Errera

September 15, 2021 at 4:18 pm Max, we haven’t been able to locate such a tool. All the HP toner chip resets we’ve found are accomplished electronically by pushing various buttons on the printer in a specific sequence. Any creative types out there with a 3D printer want to create an HP chip resetter tool for Max? Reply

Ale

November 22, 2021 at 2:11 pm Hi, Do you know of any key sequences that work on HP Ink tank wireless 415 ? It says ther’s a problem with the black cartridge even though the paper I´ve printed before it had no problems. Seems like a counter/ cartidge chip issue for me. Reply

Rob Errera

December 15, 2021 at 1:16 pm To reset your HP ink tank wireless 415, press and hold both the Wireless button and the Cancel button on the printer control panel for three seconds. If you’re getting E4 paper jam errors on your HP ink tank, Ale, you may want to check out this video. Reply

Sofia

January 15, 2023 at 8:25 pm Im still having a hard time with my wf4830 pro US version. Its impossible. I got a chip resetter physical and it did not work. Is there anyone who has successfully converted a wf4830 pro US to a sublimation printer? I have been looking for months now, please contact me if you have or know someone who has thank you in advance! Reply

Bryan Mark

October 12, 2021 at 2:48 pm I cant find the reset point for my epson 212 cartridges? Do you know where they are? Reply

Rob Errera

October 12, 2021 at 5:34 pm This is an interesting question, Bryan, This Amazon customer suggests that original Epson 212 cartridges cannot be refilled or reset … refillable cartridges must be used. But this YouTube video shows Epson cartridges being reset with a resetting tool, but we can’t guarantee it will work with your printer. Our suggestion would be to stick with genuine OEM replacement ink cartridges. In our experience, Epson printers can be especially finicky when it comes to refilling and/or third-party replacement cartridges. Reply

TH Lim

October 25, 2021 at 9:04 am Hi, sorry, I was unable to find the reset button above the chip, of epson ink cartridge T04E. Can you please show me the location of the button. Thanks. TH Lim Reply

Rob Errera

November 4, 2021 at 10:34 pm Instead of us walking you through the steps, Sushi, check out how the folks at Wikihow do it here! Reply

Andrew grant

November 4, 2021 at 10:19 pm Which multi function wireless photo printer. do you recommend as giving good quality results, and easy to make use 3rd party cartridges. Not bothered about speed. Want good quality photo prints up to A4, able to print wirelessly from phones etc. Most important no functionality can be disabled that can not be simply overridden. Reply

Rob Errera

November 5, 2021 at 1:22 am You can check out our list of the best all-in-one printers for 2020 here, Andrew. Reply

Shameka Taylor

November 16, 2021 at 2:49 am Will this work with the sublimation cartridges for a Epson WF-7720? Reply

Rob Errera

November 22, 2021 at 2:55 pm Sublimation ink is a special type of ink that, when heated, transforms from a solid to a gas. It’s great for transferring images to fabric. Assuming you’re using a genuine Epson cartridge — or refilling an OEM Epson cartridge with sublimation ink — you should be able to reset your Epson WF-7720 cartridge like you would any other, Shameka. Reply

Kashy

February 22, 2022 at 1:33 pm Thanks for the solutions. However, my cartridge (901) doesn’t seem to have that button. The problem it has is that it prints blank and rejects ink even when empty. Can you suggest me a solution to this? I’d be very grateful. Reply

Rob Errera

March 6, 2022 at 3:55 am You may be able to reset the cartridge on the printer, Kashy. Try turning your printer on, wait 20 seconds, then turn the printer off and wait until it completely shuts down. Repeat this process five times. This should erase the cartridge ID number from the printer’s memory. Also, this video may be helpful. Reply

Andrew Bobeszko

November 17, 2021 at 10:27 am Hi Rob, Thank you for clear explanation of resetting cartridge chips. I wonder whether you could send me a link that describes contacts on the Epson SX235N chip, their numbers, functions, type of chip, and possibly the schematic diagram of connections. Andrew Reply

Rob Errera

December 15, 2021 at 1:09 pm Looks like you might need to replace the entire chip if you want to reset an Epson SX235N cartridge, Andrew, but you can buy some from China for under 10 here. Reply

Rob Errera

August 17, 2022 at 7:57 pm You will likely get an error message on your HP 6255 after installing refilled ink cartridges, Erica, but in most cases, you can ignore these warnings and simply press the continue button to continue printing. Your printer might not be able to accurately monitor your ink levels, so you’ll need to keep an eye on the quality of your prints. If you need to reset your HP 6255 to factory default settings, go to the control panel on your printer, and click the gear icon (Settings). Scroll down to the bottom and click Restore to Factory Default Settings. Reply

Rob Errera

January 26, 2022 at 1:23 am We don’t sell chip resetters, Travis, and we can’t endorse any third-party products. That being said, if you poke around the Internet you can find something like this, which should work for you. Reply

Vai

January 9, 2022 at 5:01 pm Hey there, I was wondering if its possible to rest HP 58a cartridges (Im using it for hp404dn). Appreciate all the efforts. Reply

Rob Errera

January 25, 2022 at 9:20 pm Flip that cartridge over and look at the contacts, Vai. If you place a piece of tape over the top contact of the second row from the right, and a piece of tape over the bottom contact of the third row from the right, you may be able to fool your HP 404dn into believing the ink cartridge is full. You can remove the tape on the cartridge once your HP 404dn starts printing a test page. This video goes into more detail. Good luck! Reply

Ashley

January 10, 2022 at 11:28 pm I have an HP envy 4500 and used third party ink cartridges. It’s telling me that the cartridge is for an older generation of printer. I reset it by hitting the line button then home then line 2 times. I was able to print the model number while I was in support menu but it goes back to error. What do you recommend I do from here? Reply

Rob Errera

January 26, 2022 at 1:14 am Try these steps from HP support, Ashley. 1. Remove the cartridges from your printer. 2. With the printer turned on, unplug the power cord from the back of your printer and wait 30 seconds. 3. Plug back in and power up the printer. 4. Reinstall the ink cartridges when the printer requests them. You can learn more about HP error messages here. Good luck, Ashley! Avoid future problems by sticking with OEM ink cartridges! Reply

Rob Errera

January 25, 2022 at 9:08 pm The Sawgrass SG500 is a fine sublimation printer, Duane, but resetting the chips can be a challenge. This video shows a user having success by replacing the chip on his SG500 cartridges. Check it out! Reply

Ganesh Gokhale

January 22, 2022 at 11:16 am I am using new HP 802 cartridges in my HP 1510 printer. BUT unable to use it because of both ink cartridges lights are blinking Reply

Rob Errera

January 26, 2022 at 1:28 am Try these steps from HP support, Ganesh. 1. Take the cartridges out of your printer. 2. Kill the power to the printer by unplugging the power cord. 3. Wait 30 seconds. 4. Plug the cord back into the printer. 5. When the printer requests new ink cartridges, reinstall your cartridges. Hopefully, this does the trick! You can learn more about HP’s blinking lights and error messages here. Reply

Rob Errera

January 26, 2022 at 2:14 am Ok, Farida, let’s do this! Flip the cartridge over and look at the contacts on the bottom. There should be four rows of contacts on the right, four rows of contacts on the left, and two rows of contacts in a V-shape in the middle. Cover the four rows of contacts on the right with a piece of tape and install the cartridge in your printer. Ignore any error messages. Your HP printer should print an alignment page. Remove the cartridge again once the alignment page has been printed and tape over the four rows of contacts on the left side of the cartridge. This should leave only the two center rows of contacts exposed. Place the cartridge back in the printer for ten seconds and remove it. You can remove both strips of tape from the contacts and reinstall the cartridge, which should show a full ink level. Reply

Shubham Gupta

January 24, 2022 at 12:12 pm Hi Rob, Love what you are doing for us¸ I have trouble resetting the ink cartridges of my HP Deskjet 3630 printer. Could you please help me with the steps? Thanks in Advance!! Reply

Rob Errera

January 26, 2022 at 1:05 am Thanks, Shubham! Try these steps from HP support to reset your HP 3630’s ink cartridges. 1. Take the cartridges out of your printer. 2. Kill the power to the printer by unplugging the power cord. 3. Wait 30 seconds. 4. Plug the cord back into the printer and power up. 5. When the printer requests new ink cartridges, reinstall your cartridges. Hopefully, this does the trick! You can learn more about HP’s dreaded blinking lights and error messages here. Reply

Jean-Franois Nol

January 27, 2022 at 2:25 am Hello, wonderful help, thanks! Did you find a way to reset the T320? (Epson PM-400) Reply

Rob Errera

February 14, 2022 at 6:34 pm We’ve had no luck finding a reliable chip resetter or even replacement chips for Epson T320 ink cartridges, Jean-Francois. However, this video may offer some solutions using the Epson PM-400 menu panel. Reply

Jaydeep

February 21, 2022 at 10:13 am Hy i have refilled black 304 cartridge in my HP desk jet 2600. Now it shows up cartridge failure. From where can i reset the ink level. Reply

Rob Errera

March 6, 2022 at 1:28 am Okay, Jay, turn your printer on, wait 20 seconds, and turn it off again. Allow the printer to completely shut down. Repeat this process five more times to clear the HP cartridge ID from the printer’s memory. Good luck! Reply

frank H

February 23, 2022 at 12:46 am How to reset a 3011 Blk Cartridge for a Brother MCF-J491DW using a paper clip? Thanks! Reply

Leah

May 1, 2023 at 2:48 pm Same – Brother MFC-J117ODW – tried blacking out ink window, unplugging printer, taking cartridges out …still says ink low. The chip for LC410 is a tiny flat thing – nothing to push to reset. Please help:) Reply

Rob Errera

May 4, 2023 at 12:20 am Brother offers an app called Brother Mobile Connect that monitors printer ink levels through a program called Page Gauge. You might be able to reset your ink level with the app, Leah. Some Brother users claim the ink levels will reset if you let the LC401 ink cartridge run completely dry. We’ve also seen a trick where you remove all of the ink cartridges and ask the printer to run. This resets the ink levels once the ink cartridges are replaced. Check it out here. Good luck, Leah! Reply

stephanie

February 23, 2022 at 8:20 am Hi Rob, Firstly thank you so very much for such an informative write up, its very well written, will plenty of detail. I own the epson 440 and my search for resetting the cartridges led me here to your website. You mentioned their are 3rd party chip resetting firmware/programs available, some of them being free, do you have any suggestions on where im able to download one. Most ive come across are free, but will lock you out of the printer without buying an activation code. Reply

Rob Errera

March 6, 2022 at 4:00 am It seems some Epson printers must get a printer error message before the ink levels can be reset. This video explains it further and may be helpful. We haven’t found any free resetters for Epson, just ones like this for around 14. Reply

Jennifer

April 6, 2022 at 7:44 pm Hi, I’m having issues getting around the HP officejet 4630’s hp61 ink cartridge saying it’s empty well before it is “actually” empty. Is there a work around for this cartridge? I looked at your other HP cartridge resets but mine doesn’t have the little reset hole and the contacts on the chip do not look the same as the one in your HP cartridge diagram. Thank you for any help you can give! Reply

Rob Errera

May 10, 2022 at 3:49 pm There’s still life left in those ink cartridges, Jennifer! Don’t give up on them. First, make sure your drivers and firmware are up to date. You can download them here. If the printer still won’t give you an accurate ink level reading, you can perform a factory reset. Here’s what HP recommends: 1. Disconnect the power cable from the printer while the printer is still ON. 2. Disconnect any other cables if connected to the printer. 3. Press and hold the printer’s power button for 15 seconds. 4. The printer should be directly connected to the wall outlet and not to a surge protector. 5. Reconnect the power cable to print and the printer should power ON by itself. If the printer doesn’t power ON then please manually power it ON. Good luck, Jennifer! Reply

Giovanni

March 5, 2022 at 11:13 pm Hi Rob, Could you please tell me if there is a way to reset the 33xl Epson compatible cartridges? My Epson XP-7100 indicates that a cartridge is empty and to be replaced, but there’s still some ink there. No reset button beside the chip. No resetter found. Tanks in advance. Reply

Rob Errera

March 6, 2022 at 4:08 am First, Giovanni, hit the Home button on the front of your Epson 7100 and select Settings. Scroll down to Restore Default Settings. Select the reset option that says, “All Except Network Settings”, and select Yes to reset the printer. This may help reset the ink counter on your printer cartridge. This video may also be helpful. Reply

Giovanni

March 7, 2022 at 5:52 pm Hi Rob, Thank you for your reply. I had already watched that video, but it’s not helpful for my issue. I’ve also reset the printer, but the problem persists. So I took another approach: I’ve replaced the chip of the cartridge at issue with the chip of a new and equivalent cartridge. At least I don’t have to throw away a cartridge with a high level of remaining ink. And since the problem occurred only with the cartridge with black ink, which is the most capacious and durable one, I think it can be a solution not too bad. Are you agree? Thanks again. Reply

Vito

March 17, 2022 at 8:47 pm Hello Frank, I have an HP office jet 3830 and have been purchasing non oem ink cartridges and finding that it is hit and miss. Today I have tried using an UPSEK ( brand ) Black 63XL and the printer isn’t recognizing it and to replace the indicated cartridge. I did try the following steps to no avail, 1. Take the cartridges out of your printer. 2. Kill the power to the printer by unplugging the power cord. 3. Wait 30 seconds. 4. Plug the cord back into the printer and power up. 5. When the printer requests new ink cartridges, reinstall your cartridges. Any help is appreciated. Thanks, Reply

Rob Errera

May 9, 2022 at 4:30 am Your experience is not uncommon, Vito. Third-party cartridges are notorious for giving incorrect ink levels. The best advice we can give is to stick with genuine HP ink cartridges. They cost more, but they work right every time! Reply

Mike

May 5, 2022 at 8:49 pm HI, is it possible to perform a toner reset on a LaserJet M553 Printer? I have googled my eyes out to no avail. Any help wouyld be greatly appreciated!! Reply

Rob Errera

May 11, 2022 at 10:30 am First, turn your M553 off via the power button on the printer. Next, restart the printer while holding down the ‘Go’ or green button until the monitor reads ‘Cold Reset’ and the printer motors begin to run. Release the Go button. The printer should say, ‘initializing’ then, ‘restoring Factory Settings’, and finally, ‘Offline’. Hit the Go button a final time to bring the printer back online. This should reset the toner chip, Mike. Good luck and happy printing. Reply

Lucy

May 13, 2022 at 2:37 am Hi Rob, I’m about to purchase an Epson SureColor A1 Inkjet Printer T3160N and have been researching where to get ink to refill the cartridges but I am hitting a dead end. Can you refill these cartridges and what ink do you use to do it? Thanks in advance. Reply

Rob Errera

August 16, 2022 at 9:54 pm The Epson SureColor A1 is a great printer for professional quality, large format graphics, Lucy, but we haven’t found a cheap way to refill its ink cartridges. And, in all honesty, if you’re paying for a high-end printer, you probably shouldn’t cut corners with replacement ink cartridges. You’ll get the best results with genuine Epson ink cartridges. Reply

Fahad

May 18, 2022 at 8:07 pm Hi, Is it possible to reset HP MFP135w W1107A laser toner cartridge chip? Reply

Rob Errera

August 16, 2022 at 10:29 pm You’ll need to find third-party compatible replacement chips, Fahad. This YouTuber uses peel-and-stick replacement chips that seem to work well. This guy on YouTube shows how to remove and replace the chip on an HP W1106A cartridge, the same as the W1107A, only it’s sold in a different part of the world. If you try this method, be careful with that utility knife! This guy does a great job refurbishing and refilling a W1107A cartridge, but it looks like a LOT of work for little savings and questionable print quality. Another workaround might be to turn off the chip info for your HP printer. You can learn more about that here. Reply

Louiemar Tan

May 20, 2022 at 9:05 am Hi, how to reuse HP GT 5820 protected cartridge to another same model HP Printer Reply

Rob Errera

August 16, 2022 at 3:30 am Looks like you’ll need to remove HP Cartridge Protection from your GT5820 cartridge, Louiemar. To disable the cartridge setting on your HP printer, go to your computer’s control panel and select the printers tab. Select your HP printer from the list of printers. Locate the HP toolbox, click the “disable cartridge protection, and click save. This should allow you to use your HP GT 5820 cartridge in another HP printer model, Louiemar. Reply

John Wilkinson

June 1, 2022 at 3:39 pm I have an HP Tango which uses the HP 64 cartridge. No “Pisa” towers. Which pins do I cover? Reply

Muz

June 13, 2022 at 11:09 pm HI, can you help with resetting Primera LX500 cartridges please. Thanks. Reply

Rob Errera

August 17, 2022 at 8:04 pm According to Primera, you should go to the control panel on your LX500 and select Printers and Faxes. Select your printer and click on Printing Preferences. You can choose Clean/Change Cartridges, Check Ink Levels, or Ink Levels and Cartridge Maintenance under preferences. Any of these choices should reset your Primera LX500 cartridges. Click the Change button. Choose which cartridges you are changing, black or color. Best of luck, Muz! Reply

Rob Errera

August 17, 2022 at 8:14 pm The HP 81X (CF 281X) toner cartridge isn’t designed to be refilled, so I assume you’ve already found a way around this, Nadeem, maybe by drilling a new hole into the cartridge or removing one or both of the endcaps. Either way, you will also need to replace the chip on this cartridge to get it to work in your HP M630. These guys in Germany demonstrate how to pry off the old chip and install a new one. Good luck, Nadeem! Be careful with the knife and hot glue! Reply

Neglaka

July 19, 2022 at 8:00 pm I have my HP 2375 printer which has two 667xl cartridges, one color and the other black. when I make a print or copy in black, arriving at the half of the process of copying or printing the black light starts to flash and ejects the paper without finishing the copy or the print. the 2 cartridges are authentic and I haven’t even printed 100 pages yet. you can help me? Reply

Rob Errera

August 17, 2022 at 8:22 pm When in doubt, uninstall your printer and reset it to its original factory default settings, Neglaka. You can restore your HP 2375 to its original factory settings by turning the printer on, pressing the power button, holding the cancel button (“X”) for three seconds, and then releasing both buttons. Your HP 2375 should print out a test page to let you know the printer is reset. Good luck, Neglaka! Reply

Charm

August 5, 2022 at 4:36 pm Hi, I have tried everything possible with my HP 63 original in cartridge. to override. It is still showing ink level depleted even after I have reinked the cartridge and over the chip thing the test print comes out perfect showing the colors and it said it has aligned however when I print my document it comes out black and white only and showing me estimated ink level for the color is empty. The color cartridge is full. Can you show a picture of where to cover on the HP 63 chip after refilling the ink please. Reply

Tammie

October 25, 2022 at 5:29 pm is there a way to get around the HP 9z out or warranty on ink or printheads, anything would help, thanks Reply

Rob Errera

January 24, 2023 at 11:29 pm We’re not sure we understand your question, Tammie. The short answer is, if you refill your HP cartridge, it will void your warranty. You can check out HP’s warranty on ink and printheads here. Reply

kevin

November 5, 2022 at 5:19 pm any work around with HP designJet T210 i have refill but still showing empty ? Reply

Rob Errera

January 24, 2023 at 11:37 pm Have you tried this, Kevin? 1. Turn off your T210 2. Unplug it from the wall 3. Remove all ink cartridges 4. Plug in and restart the printer 5. Replace the ink cartridges when prompted Sometimes this works. There is a good guide to troubleshooting DesignJet T210 problems here. Reply

DALE NICHOLS

November 12, 2022 at 2:00 pm How can I reset a Brother LC404 ink cartridge for a Brother J1205W printer? I doesnt seem to have a reset button on the cartridge, and I cannot find a cartridge resetter available online. I am very frustrated with this as I bought the printer because it was advertised with the Inkvestement Tanks which I thought were refillable. Great information in your site here. Thanks Reply

Rob Errera

January 25, 2023 at 1:19 am Sorry, Dale, but we can’t find a resetter for the LC404 ink cartridge either. These folks are experiencing a similar situation to yours and having a lively discussion about possible workarounds. Even though your Brother J1205W has INKvestment Tank technology, it still uses ink cartridges. These INKvestment Tank cartridges hold much more ink than a standard ink cartridge, but they need to be replaced eventually. (Brother promises a full year of printing from the starter cartridges they provide.) Reply

Jessy

December 9, 2022 at 1:44 am I have a HP OfficeJetPro 9025e who’s printing ability is being held hostage by HP as I refuse to use their print cartridge services as they’re ridiculously expensive. Now I’m unable to print. I called customer service and they state they locked my printer. How do I, if possible, override this so I can use my printer. The cartridges still have ink (962/963, 964/965) for cyan, magenta, yellow black. I greatly appreciate your help. Reply

Rob Errera

January 25, 2023 at 2:58 am Being held hostage is no fun, Jessy. Resetting your printer to its original network settings should unlock it. 1. Open the printer dashboard from the control panel and select Setup. 2. Click Network Setup 3. Select Restore Network Settings 4. You will be asked if you want to restore network defaults. Select “Yes.” Good luck, Jessy! Reply

Bryan

December 9, 2022 at 6:11 am I’ve got a Brother MFC J1215. It’s a different animal from what you’ve described. I can refill the cartridges but how do I reset the chip in a LC404 cartridge? Is there a different cartridge that will work in this printer or am I stuck buying new cartridges when I run out of ink? Reply

Rob Errera

January 25, 2023 at 3:01 am We just discussed this with Dale a few Комментарии и мнения владельцев down, Bryan. He’s having the same problem. We’re unsure if a chip resetter for the Brother LC404 ink cartridge exists, but these folks are discussing workarounds for your J1215 printer. Reply

glenn

January 10, 2023 at 1:48 pm I have Kyocera 3155DN printers that I just bought from UK. They use different power in the US but I have a transformer that takes care of that issue. However the toner the UK printer uses is TK-3190 and the toner the US version uses is TK-3182. Will a reset chip allow me to use the TK-3182 in the UK printer? Reply

Rob Errera

January 25, 2023 at 3:07 am Many manufacturers have different product numbers for toner sold in Europe vs. toner sold in America and other parts of the world. But the toner cartridges themselves are often identical. There’s a good chance whatever chip resetter you use on your TK3190 cartridge will also work on your US-market TK 3182 cartridge. Good luck, Glenn! Reply

Alen

January 11, 2023 at 6:55 pm Hello, is it possible to reset chips for Canon imageprograf Pro 6100S. There is 8 cartridges. I just replaced one chip with Canon IPF-1700 chip although it is not the same chip. It works! Other 7 color chips I would like to reset somehow. There is no reseter on the market. There is no buttons to press on the cartridges. Reply

Rob Errera

January 25, 2023 at 3:34 am Sounds like you might have solved the problem already, Alen. If an IPF-1700 chip worked on one cartridge from your Canon 6100S it will probably work on the others. Give it a try and let us know. Reply

Steve

January 17, 2023 at 3:22 am Any info on the Kodak 10 series? I have tried everything and I’m willing to get creative but I need information on how this chip works. I don’t understand why no information is available on the Kodak? Reply

Rob Errera

January 25, 2023 at 3:50 am If you poke around the interwebs, you should be able to find replacement chips for your Kodak 10 series cartridges, Steve. The installation process for Kodak 10 series chips is pretty straightforward. 1. Remove the ink cartridge from your Kodak inkjet printer. 2. Turn the cartridge over. 3. Press the plastic clip holding the chip in place inward until the chip slides down and off the ink cartridge. 4. Cut the plastic clip that holds the chip in place off the ink cartridge. 5. Slide the new chip into place. It will have an adhesive backing. Align the longer side of the chip with the left side of the cartridge. 6. Reinstall the cartridge and print away! Reply

Clifford Gaw

February 9, 2023 at 7:51 pm I have a Canon Pixma 4210 printer. The printer was great until I did a fast clean then a deep clean as the printing was spotty. The procedure said it will use a lot of ink and to make sure the ink tubes were not empty so I partially filled, above the half way mark, and pressed Deep Clean. Error code 5800 came up and everything was frozen and 5800 says to take it in for repair. I can not find a Canon Printer repair facility near 32174. Can anyone offer any help. The Canon site is canned responses only and of no useful help so far. Reply

Rob Errera

February 15, 2023 at 3:46 pm Canon’s error code 5800 has to do with resetting the waste ink counter, Clifford. Try this: 1. With the printer off, press and hold the stop button and the power button at the same time. 2. Release the buttons to put your Pixma into service mode. 3. Press the green button four times to reset the waste and counter. 4. Restart printer. You might find helpful information here, Clifford, Good luck! Reply

KHALED ALI

February 20, 2023 at 2:14 am Can the cartridges for design jet 5000PS be refilled and what is the procedure to do it and to reset the chip Reply

Rob Errera

February 27, 2023 at 5:24 pm HP does not recommend refilling DesignJet 5000PS ink cartridges, Khaled. They probably figure you wouldn’t skimp on replacement ink if you sprung for a large format printer. That being said, we’ve seen people refill these cartridges, but it looks messy and complicated. Good luck! Reply

Rob Errera

March 24, 2023 at 2:57 am It sounds like you’re looking for a way to reset the ink cartridge chip on your Primera Bravo 4100 disc printer, Derek. The Bravo 4100 is a high-end inkjet designed for printing labels directly on CDs and DVDs. A specialty printer like the Primera works best with genuine Primera ink cartridges. You can “trick” a Bravo 4100 into using third-party cartridges, but it’s not easy. You’ll need to find replacement chips online, which can be challenging. Ensure you order the chip number for the color cartridge you’re replacing. Primera ink cartridges have the following codes: 53604 is black 53601 is cyan 53602 is magenta 53603 is yellow These chips also come in A and B versions. You’ll need to research which one your cartridge needs. These chips are held in place with a plastic post that needs to be clipped or pried off. Finally, you’ll need to glue the new chip in place. Good luck, Derek! Reply

Scott M

March 21, 2023 at 11:20 pm I have a Primera LX-2000. I have been trying to find an chip resetter or a solution to use aftermarket ink. I have even explored modifying the firmware. The only solution I can find are replacement chips which still make this printer ridiculously expensive to use due to the high cost of the primera ink cartridges. Rob, you seem to be the ultimate guru on finding workarounds Your knowledge is impressive. Do you have any ink workarounds for this Primera model? Also, if we can’t find an ink solution, we have no choice but to sell our Primera printer and look for a solution with cheaper ink for our retail labels. What cost effective printer (in a similar class to the Primera LX series) would you recommend that can support aftermarket ink for retail labels and possibly a CISS system. We don’t mind investing in a chip resetter. I would love to hear your thoughts. Thanks for taking the time answering all of our questions here. We all really appreciate you. Reply

Rob Errera

March 24, 2023 at 3:54 am Thanks, Scott! You ask a good question. Like Derek’s Primera, Bravo 4100 discussed below, the Primera LX 2000 is a specialty inkjet that creates professional labels. It uses pigment-based inks that are water and UV resistant. It can also print GHS-compliant labels required for chemicals, perfume, and other products. The LX 2000 creates professional labels but can be expensive to own. But, if you own a Primera printer, you’ll need to use Primera ink. We haven’t found a way around this. But we understand your need for affordable alternatives, Scott. Let’s see what your options are. 1. Step up to the Primera LX 3000, which uses “Big Ink” refillable tanks, which may save you money on print costs. Click here to learn more about the Primera LX 3000. 2. Step down to a Primera LX500, which is cheaper to operate, but still requires Primera ink. 3. Step over to a competitor like Epson Colorworks printers. These printers are still expensive to own but may be cheaper to operate than the Primera printers. Epson supplies are generally more readily available (and less expensive) than Primera products. 4. Stick with your LX 2000 and try to find the best deals on multi-pack ink cartridges. BH Photo carries Primera multi-packs. Good luck, Scott! Reply

Alis

April 18, 2023 at 1:50 pm Hi team c4t is possible to reset the inks bought from HP instant ink ? The issue is that the inks are only working if i keep paying them each month. I do not use the printer so often and it´s not worth it so after 2 years I decides to cancel my subscription and have to full setts of unused inks that I cant use now ;(( Reply

Rob Errera

April 20, 2023 at 5:48 am Your story is not uncommon among HP Instant Ink subscribers, Alis. Unfortunately, you’ll have to go back to buying regular HP ink cartridges as needed and consider those unusable Instant Ink cartridges a loss. We suggest returning your Instant Ink to HP; you may be eligible for some credit or coupon. If not, at least those ink cartridges will be properly recycled. Reply

Thierry

April 25, 2023 at 8:59 pm Hi, I have an Epson WF-2750 from the US, which uses 220XL cartridges, I moved in Europe, where these cartridges are not sold, and the EU version of the WF-2750 uses 16XL instead. Is there a way I can reprogram the chip of some new 16XL cartridges so ti can be detected? Or may be do something on the printer side (flashing new firmware which would not check the chip?). Thanks Reply

Rob Errera

April 27, 2023 at 12:46 am We’ve seen people install chipless firmware on their Epson printers that allows you to use any brand of cartridge (including the European 16XL cartridge). We normally wouldn’t recommend altering the manufacturer’s settings, but in your case, Thierry, you might want to check it out. Another option would be stocking up on 220XL cartridges and getting them shipped to you in Europe. Reply

Natalie

May 11, 2023 at 3:55 pm Can I reset an ink cartridge for Xerox printer, model C315 (ink is C310). I get an error on my printer “replace unsupported magenta cartridge”. The seller is suggesting I “whip the chip” but I do not see any pin holes. I’ve asked for further clarification from them, awaiting a reply, but hoping you could help quicker. fingers crossed Reply

Rob Errera

May 17, 2023 at 5:31 pm Well, Natalie, our first bit of advice is one you’re probably aware of — stick with genuine OEM Xerox toner cartridges! We’re unsure how to “wipe the chip” on a C310 cartridge. You might want to try covering one (or more) of the contacts on the cartridge with a piece of tape — as this guy did. He uses a different printer model and cartridge type, but the same idea applies. Good luck, Natalie! Let us know how it works out. Reply

Rob Errera

June 1, 2023 at 4:46 pm This video may help you reset the ink levels on your DesignJet800PS, Terry. We’ve seen people cover the bottom right contact on the printer cartridge to get the printer to reset its ink levels, but we can’t guarantee it will work with you wide format printer. Some models of HP printers will allow you to press and hold the Power and Cancel button together for 20 seconds to reset ink levels, but the DesignJet 800PS may not be one of those models. Good luck, Terry! Reply

Jackie Hylton

June 5, 2023 at 8:28 pm I’m not sure why but my Canon pixma ts3522 is reading code E04 and E05 and i can’t get the error codes to go away and im unable to print. I’ve done everything right that I know of what am I not doing right here? Can u help? Reply

Rob Errera

June 8, 2023 at 2:04 am Error code E04 means the cartridge in your printer is not installed correctly. Error code E05 means the print head is not installed or installed incorrectly. Try the following to fix the problem, Jackie: 1. Remove the cartridges from your printer. 2. Turn your printer off, but don’t unplug it from the wall outlet. 3. Use a soft, clean, lint-free cloth to carefully wipe the computer chips on the front of each cartridge. 4. Turn the printer back on. 5. Reinstall the printer cartridges. This should clear your E04 and E05 errors, Jackie. Good luck! Reply

Bruce

June 15, 2023 at 1:00 am Are you familiar with resetting the EPSON T126 ink cartridges (4) that are used in my Epson Workforce 645? The chip has 9 contacts (row of 4 above row of 5) but, nothing that will push in when pressed with a paper clip. I pulled the chip off a empty black cartridge as I was curious what I would find. The chip is secured by 4 plastic tabs that lock to the plastic cartridge body. I’m only going to print with black ink but, have to reset Cyan as it is registering empty. Is a pin resetting device the only option? Thanks Reply

Rob Errera

June 21, 2023 at 5:54 pm There may be a way to reset your Epson T126 cartridge with a paper clip, Bruce. But investing in a chip resetter for your Workforce 645 might be a better bet in the long run. Reply

Steven

June 24, 2023 at 2:04 pm Hi, is there a way to toner reset a HP LaserJet M110we? It’s uses HP so 3rd party cartridge are not possible… Reply

Rob Errera

June 29, 2023 at 5:06 am Sounds like you want to reset an HP 141 toner cartridge, Steven. That is a complicated process that involves swapping and replacing computer chips. This video may help. Good luck! Reply

An

June 26, 2023 at 8:03 am Hi Rob, I try to find everywhere to reset Brother LC432 ink, im not sure if I do something wrong, I cover the sensor with black tape but still not working, clearly it still has ink inside, can you please give me some advice? Appreciate Reply

Rob Errera

June 29, 2023 at 5:11 am We appreciate your diligence, An. Printers can be frustrating sometimes. This video may help, An. Good luck! Reply