Change Battery on iPhone 7

Table of Contents

Why iPhone turns off when the battery is charged?

Sometimes even the newest gadgets with a good battery start to fail. Sometimes the inner filling in the form of an electrolyte fails, and sometimes just wear and tear. Some owners put them next to heat and thereby spoil them. To solve the problem with shutdown when the battery is charged, it is sometimes enough to use the tips below.

Attention! Apple has released an app for iPhone 6s that has an unexpected shutdown problem. If your gadget was manufactured in September or October 2015, check the serial number at Apple.com. The company exchanges the battery for such owners for free.

How to replace battery iphone 7

How to turn on iPhone without battery?

If the battery is completely unusable or just sat down and does not turn on, but you urgently need to start the iPhone, then you can connect it to the charger and it will turn on. There is another way that will require you to be accurate, attentive and technical.

The way is that you need to disassemble your phone and connect the power supply to the motherboard. That is, make a direct connection. In this case, you need to know exactly where to connect it, otherwise you can simply ruin the device. The unit should give out 3.7 volts.

The negative wire must be clamped onto the SIM tray, and the positive wire must be connected to the battery connector. Then you need to make an imitation of turning on the iPhone. To do this, we short-circuit the loop on the power button and wait a few seconds. After that, the device should start.

You can also try to launch the iPhone from USB by connecting it to the computer.

IPhone se battery

Supplied in a black-gray rectangular elongated case. Has a capacity of 1624 mAh. Voltage 3.82 volts. On one of its sides it has a cable that goes to a special plug, which is attached to the gadget board.

We update the system to the latest version

If the version of the operating system has not been updated for a long time, then you should do it immediately. In later versions of iOS, the power-hungry app greatly increased the need for power, and to protect itself, the battery simply turned off the phone earlier. The update fixes the problem 80% of the time.

Turn yellow mode on and off

  • Charge iPhone and wait for 80% charge. Automatic shutdown will occur.
  • Go to battery mode in the setup menu. Next, put the switch on against “Energy Saving”.
  • Just use Siri.
  • If you have iOS 11, then you can add Power Saving Mode to Control Center.

iPhone 7 Battery Replacement-How To

Battery 5s

This battery has the same shape and color as described above. The power is 5.92 Whr. Voltage 3.8 volts. Capacity 1560 mAh.

Powerful reboot

Turning it on and off can sometimes help streamline your workflow. Remember the computer, if it starts to glitch, then it is restarted and then everything is working out.

In older versions of iPhone 6 and others, you need to press the shutdown and home buttons at the same time. This will help you perform a good reboot. On the seven, hold the power button and decrease the sound. In this clamped position, they must be held until the Apple icon appears on the screen. Then the button should be released.

When to replace the 7 Plus battery?

It’s important to note that an iPhone 7 Plus battery has a duty cycle of approximately 500 to 1,300 charges. That is, if you notice that the gadget is quickly discharging, reboots without a preliminary command, or turns off altogether, these are signs that you should not hesitate and contact our service center as soon as possible to replace the battery.

We have masters with high qualifications and more than 5 years of experience. That is why the problem associated with replacing the battery is solved quickly and professionally.

IPhone 7 Plus Battery Replacement

In the 21st century, almost everyone has a mobile phone. New updates are created every day, thus improving smartphones to a perfect state. To date, the hearts of people have been conquered by Apple, which introduced a stunning gadget model. iPhone 7 Plus.

iPhone 7 Plus is packed with all the innovations that satisfy everyone. But the user one way or another will be forced to face such a need as replacing the battery in the iPhone 7 Plus.

What is the difference between the Original and Copy 7 Plus batteries?

The original batteries we install come from Huizhou Desay Battery factory, the same factory produces batteries from iPhone XS to iPhone 11 Pro Max. These batteries have the same capacity as the one in your iPhone. The “battery wear” indicator will show the percentage as well as before the replacement.

Copies are made at other factories, their name does not always coincide with what is stated on the battery. Their quality is an order of magnitude worse, we recommend placing them only after understanding the fact that this is a fake.

Very often our clients have a question: what is the reason for the rapid discharge? There are several influencing factors:

  • poor quality smartphone firmware;
  • the charging connector is defective, therefore, the electrical energy cannot be supplied properly;
  • the gadget has been dropped from a height, severely hit, or subjected to pressure;
  • the user has used a counterfeit (of Chinese origin) or mismatched charger.

In order for the “apple” electronic equipment to serve for a long time, the masters recommend:

  • Handle the iPhone 7 Plus connector and plug with the utmost care;
  • under no circumstances use a counterfeit and broken charger to recharge the phone;
  • do not install applications on your smartphone that do not initially inspire confidence;
  • be careful not to let the gadget fall on a hard surface such as concrete or asphalt (use special covers).

The employees of our service center can handle any breakdown. We will carry out a comprehensive and comprehensive diagnostics of the device to see if there are any other breakdowns, provide a free consultation, answer all questions and, most importantly, replace the battery with an original battery.

What is the difference between the Original and the Copy

The original batteries that we install are produced at the Huizhou Desay Battery factory, the same factory produced batteries for the new iPhone 7. These batteries have the same capacity as the one in your iPhone. The “battery wear” indicator will show the percentage as well as before the replacement.

Copies are made at other factories, their name does not always coincide with what is stated on the battery. Their quality is an order of magnitude worse, we recommend placing them only after understanding the fact that this is a fake.

Read more:  How to Connect Iphone to Radio via Bluetooth

It should be noted that the battery life is 1-2 years. If you have been using the same battery for much longer, then it is time to think about replacing it.

When the battery wears out?

One of the common problems that can arise during the use of iPhone is associated with a failure of the battery. fast discharge of the phone. This problem is faced by 100% of iPhone 7 owners. Signs of battery failure can be the following:

Signs that your iPhone battery has failed:

  • If the battery is charging very slowly and discharging very quickly.
  • If the smartphone suddenly turns off during a phone call or at any other inopportune moment.
  • If it is noticeable that the battery is swollen and the glass protrudes somewhat from the case.
  • If the battery has passed its useful life.

Where to replace the battery?

If you notice one or more signs, then it’s time to think about replacing the battery. Of course, it is worth doing this in case of emergency, when one of the above problems is really present. Our service center can replace the iPhone 7 battery in 30 minutes and with a 12 month warranty. AppleLab specialists are ready to help with solving this problem and will do everything to ensure that your smartphone works again as before. You can replace the battery on the iPhone 7 at our branch in Kiev, Odessa, Dnepropetrovsk, Kharkov, Zaporozhye and Lviv. When replacing, only the battery from official Apple suppliers is used.

Waterproof after battery replacement

iPhone 7 has an IP67 rating, which allows it to be submerged up to 5 meters. When replacing the battery, we suggest that you restore the water protection with factory adhesive tape. The cost of this service is 100 UAH.

Replacing the battery (battery) iPhone 7

Not so long ago, the new iPhone Apple 7 was released. It is more advanced than its predecessors. However, despite this, it is not immune to battery problems. As in previous models, the battery can be damaged in it. Most often the problem is due to the natural wear and tear of the battery. the iPhone 7 has a Li-Po battery, which, due to its chemical composition, lasts no more than 1500 charge / discharge cycles. Those. On average 2-3 years. But there are cases of improper operation, non-observance of elementary rules when charging the phone, due to which the battery stops working as before.

How long does the battery change?

In order to install the original battery does not require much effort and time. The procedure can be carried out within 30 minutes. This is how much time our specialists will need. If you want your smartphone to work without any problems, then contact us for help. We will definitely help you and provide a guarantee for the work performed.

⌚ How long will it take to replace the iPhone 7 plus battery?

We do iPhone 7 Plus battery replacement within 2 hours after diagnosis, except for difficult cases. And our courier can arrive within an hour and pick up your device.

Where to repair in Kiev?

To replace the iPhone 7 plus battery. trust the professionals and contact the iLab service center. Address: Kiev, st. Pavlovskaya 10, office 5. Phone: 0 800 751-752.

Diagnostics and repair

The wizard diagnoses the iPhone 7 Plus to confirm the need for work on the “iPhone 7 Plus Battery Replacement” service and informs you of the cost and time of repair.

Open your iLab service

Earn from 100 000 UAH per month! Franchise of Apple service centers in Ukraine.

How to replace iPhone 7 Battery in 3 minutes

IPhone 7 Plus Battery Replacement

Ready with a guarantee!

You get your refurbished iPhone 7 Plus with up to 6 months warranty.

Addresses of service centers Kiev. st. Pavlovskaya, 10, office 5. st. Velyka Vasylkivska, 12

How we work Pavlovskaya: 09:00. 18:00, Mon-Fri Vasylkivska: 10:00. 22:00, daily

You asked. we answer. IPhone 7 plus battery replacement questions answered

Reception for repair

We will take your non-working iPhone 7 to a service center.

Causes of iPhone 7 Battery Malfunction

Battery. it is the productive “core” of your Apple iPhone 7, which provides autonomy and full functionality of the device. Immediately after purchase, the smartphone does not require frequent charging, because the battery provides long-term autonomous operation without the need for frequent replenishment of the energy level. Based on the official iPhone 7 spec, the original phone battery is rated for a minimum of 500 full recharge cycles. At the expiration of this indicator, or in case of improper operation, even earlier. battery life will gradually decrease and the device will need to be charged more frequently. But the cause of such a malfunction can be not only wear, but also can affect the operation of the battery:

  • Dropping / hitting the smartphone on a hard surface, and as a result. damage to the internal structure;
  • Penetration of water inside, and its effect on parts;
  • Prolonged contact of the device with an aggressive environment;
  • Incorrect charging;
  • Using the phone under improper operating conditions (low / high temperatures, high humidity);
  • Frequent use of software / programs / applications that overload the device and provoke overheating.

Ready with a guarantee!

You get your refurbished iPhone 7 back and forth with up to 6 months warranty.

Addresses of service centers Kiev. st. Pavlovskaya, 10, office 5. st. Velyka Vasylkivska, 12

How we work Pavlovskaya: 09:00. 18:00, Mon-Fri Vasylkivska: 10:00. 22:00, daily

When to replace the battery on iPhone 7?

How can you tell if your iPhone 7 battery needs to be replaced? There is a whole list of “symptoms” that signal that your smartphone has a battery problem. Among the most obvious and common are the following signs:

  • The device heats up while charging. If, while charging, you notice that the temperature of the case rises significantly, the battery is probably worn out or damaged;
  • The phone does not hold a charge well / sits down quickly. You just charged your iPhone to 100%, and after an hour you see 5% again. this is a typical “picture” for battery problems;
  • The shape / contours / volume of the battery is deformed;
  • The smartphone won’t charge at all. With the most difficult breakdowns, or complete wear of the battery, charging becomes completely impossible.

It is best not to take risks and not engage in diagnostics on your own, even if there are signs of a specific breakdown. At the iLab service center, your gadget will be diagnosed free of charge, and the malfunction will be determined unmistakably. So if you see any of the above signs on your device, it is likely that your iPhone 7 battery needs to be replaced. Although replacing the battery seems to be a fairly simple procedure, there are many risks involved in a non-professional implementation. It is worth refraining from amateur performances, and contact the qualified masters of the iLab service center.

IPhone 7 Battery Replacement

Diagnostics and repair

The wizard diagnoses the iPhone 7 to confirm the need for work on the “Replacing the iPhone 7 Battery” service and informs you of the cost and time of repair.

IPhone battery replacement in Kiev

The quality of products manufactured under the world famous Apple brand does not cause any doubts or complaints. And yet it happens that the “apple” devices need repair or replacement of parts.

Despite the high quality of the components used by Apple, if the user does not follow the rules of use or due to a decrease in its power consumption, it may be necessary to replace the battery over time. Both low and high temperatures have a negative impact. So, for example, if the iPhone was in direct sunlight for a long time in the summer, or, on the contrary, was left in the cold, then the battery may lose capacity and the autonomy will decrease.

Non-original chargers of dubious quality can also quickly destroy the iPhone battery. Therefore, one of the important rules for using this device is to refuse to purchase third-party devices for charging batteries.

Choose your model

Model Price, UAH The price includes the cost of parts and work.
iPhone 11 Pro Max 1899
iPhone 11 Pro 1899
iPhone 11 1799
iPhone XS Max 1399
iPhone XS 999
iPhone XR 1099
iPhone X 999
iPhone 8 Plus 799
iPhone 8 799
iPhone 7 Plus 749
iPhone 7 649
iPhone SE 699
iPhone 6s Plus 649
iPhone 6s 549
iPhone 6 Plus 549
iPhone 6 449
iPhone 5s 349
iPhone 5 349

What signs indicate the need to replace the battery

The unserviceability of an Apple iPhone rechargeable battery can be expressed through a number of symptoms. These include the following:

  • the battery began to discharge extremely quickly;
  • the device turns on only during charging;
  • the device turns off at low ambient temperatures;
  • at low percentages of the charge, the smartphone works slowly;
  • iPhone suddenly turns off during a call.
Read more:  How to take macro photography on iPhone

Such problems may indicate the need to replace the battery, which has failed due to trivial wear and tear, moisture getting inside the device, or under the influence of high (low) temperatures. In addition, battery replacement may be necessary in such cases as:

  • iPhone display bulges and spots appear on the screen (the problem usually lies in the “swollen” battery, which presses on the screen from the inside and deforms it). In this case, an urgent battery replacement is required;
  • the charge level does not stand still, it constantly “jumps”, and the device itself spontaneously starts rebooting;
  • reducing the time of active operation of the device. That is, the iPhone is in active mode for less than its due date.

In Kiev, the replacement of Apple technology rechargeable batteries can be made at the iFix service center. We work exclusively with branded materials and spare parts, specialists will perform this operation as soon as possible and with a quality guarantee.

How to Extend the Quality Life of Apple’s iPhone Battery?

Yes, you can extend the life of the iPhone battery’s high-quality battery if you follow the simple rules of using the device:

  • do not leave the iPhone for a long time at temperatures below zero and above 35 degrees Celsius;
  • do not allow direct sunlight to fall on the device;
  • do not discharge the device below 10%;
  • exit all applications that are not currently being used (to save battery power);
  • use only the original accessories that come with the iPhone. Lightning USB cable and AC adapter.
  • avoid using portable power bank chargers, car chargers.

What is the battery life on an iPhone?

change, battery, iphone

The life cycle of an iPhone battery is 600-900 full charge-discharge cycles, which is approximately 12-16 months of device use.

Battery replacement time

15-20 minutes, depending on the model of the device, such repairs take place in the presence of the client.

What batteries are you using?

When installing, we use high quality spare parts, which in their characteristics fully correspond to the factory originals.

Is it possible to independently replace the battery on an iPhone?

Yes, but often attempts to replace the battery on the iPhone yourself lead to even greater problems in the functioning of the device. Without professional skills and the necessary tools, it is better not to take risks.

The battery replacement service is considered the most demanded. The reason for this is the increasing use of the device and normal wear and tear. In the event of the above problems and while using a smartphone, we recommend contacting specialists who can quickly and reliably carry out this iPhone repair. In iFix, in addition to replacing the battery, the wizard will definitely carry out a full diagnosis of the device and will be able to identify a number of faults and defects that are invisible during external inspection, which will also be eliminated during the battery replacement.

When to change your iPhone 7 Plus battery

Like all smartphones, the iPhone is equipped with a lithium-ion battery. They do not require any maintenance, have a low self-discharge level, are lightweight and have a high current output. But they are sensitive to temperature and do not like overcharging. This means that charging your phone overnight is a bad idea. Subject to chemical aging. The performance of a lithium-ion battery is limited by the number of cycles. All iPhone models have 500. When they run out, the battery capacity is 80% of the previous value. You can check how much is left on your smartphone by going to “Settings”, “Battery”, “Battery status”. The item “Maximum capacity” will display the actual remaining capacity.

Outwardly, the need for replacement looks like this:

  • the smartphone is quickly discharged;
  • switches off arbitrarily;
  • slow launching of applications;
  • decrease the volume and brightness of the screen;
  • heats up;
  • swollen battery.

How to replace battery on iPhone 7 Plus

Incidentally, the iPhone 7 Plus has a 2900mAh battery, while the 8 Plus has a 2675mAh battery. But Apple claims that capacity doesn’t matter, and that thanks to a super-powerful and low-power processor and sophisticated software, their smartphones consume much less power, and therefore a single charge lasts for a longer period of time.

The iPhone 7 Plus battery is out of order, what to do?

We propose to go to our partners, to the Apple Lab service center. Their offices can be found in Dnipro, Kiev and Kharkov. They provide quality service and a guarantee for repairs. But if you are sure that they are able to cope on their own, then here are the instructions.

  • Turn off the phone.
  • Unscrew two screws at the bottom of the case.
  • Then we heat the screen. To remove it, you need to use something like a pick. Carefully destroy the adhesive layer and detach the display using a suction cup with a ring.
  • We unscrew the screws, remove the protective strips. Disconnect the loops and put the screen aside.
  • To remove the battery, you need to remove the vibration motor, and then remove the adhesive tape from under the battery.
  • After the old battery has been taken out, you can start installing a new one. To do this, adhesive tape is glued to the new battery and installed in place.
  • Then they connect the loops and check the device. If everything is in order, you can assemble the smartphone.

Home repair lottery. If you have never done this, then you shouldn’t even start. Disassembling an iPhone is not as easy as it sounds, you need tools, adhesive tape, and the ability to restore moisture protection.

  • Original and copy. is it worth the risk

If you go to the AppleLab service center website https://Apple-lab.com.ua/, then you yourself will answer this question. The difference in price is insignificant. But on the other hand, the result makes you think.

An original battery means a part made in OEM production, and with which new models are equipped. Official copies do not exist, and the fact that it is given out does not stand up to criticism. No service center or parts dealer can guarantee the correct operation of this part. The result can be very disastrous. Therefore, when asked what to choose the original or a copy, the answer is obvious.

Commentary: the editors are not responsible for the opinions expressed in articles marked with a Ⓟ.

Determine wear

According to the manufacturer, the iPhone 7 battery is rated for more than 500 recharge cycles. This amount is enough for an average user for a year and a half of use. With less intensive use, the life can be increased, but still the time will come when the smartphone will start to work noticeably worse due to battery wear. Here are a few signs that your phone battery should be replaced with a new one. its capacity decreases; the phone starts to reboot more often; the smartphone does not work without charging; disconnection occurs while watching video or surfing the Internet; unusual sounds are heard when pressing the display; the smartphone requires charging more often than usual; streaks and bumps appear on the screen. In some cases, destruction of the battery will deform the body of the phone itself. This can lead to more serious damage, so such a smartphone should be taken to a service center as soon as possible. What Causes Battery Breakdowns Many factors can cause an iPhone 7 battery to fail. For example, this often happens due to the use of speakers, additional devices, communication modules. The battery itself can be significantly damaged for reasons associated with such problems as: oxidation of internal wiring and contacts (this happens due to the accumulation of dust, moisture); short circuits if the phone is in water; using powerful programs that consume a lot of energy; assembly defects; use of a defective charger. These are not all the reasons that can cause iPhone 7 battery breakage.

How to replace battery on iPhone 7

Apple smartphones have been the leader in the market for such devices for several years. They are functional, reliable and comfortable. At the same time, in addition to the advantages, such phones also have a significant drawback, which is associated with the replacement of a failed battery. Below in this article we will talk about how to recognize significant wear and tear and replace the battery on the iPhone 7. It must be said right away that this procedure requires certain skills and therefore it is best to entrust it to a specialist. Here you can find out the of such work.

Battery replacement

In order to replace the battery of the iPhone 7 smartphone, you must first wait until it is discharged to a level of no more than 25%. Keep in mind that phone batteries can explode, so safety precautions cannot be ignored. So, the procedure is as follows. 1. Turn off the phone and use a special screwdriver to unscrew the screws of the Lightning connector. 2. Prepare the iOpener or heating pad to warm up the glue. 3. The display is separated from the back wall using a special suction cup. 4. Run a spatula along the edge of the screen to completely free it from the glue. 5. We disassemble the device by unscrewing the three-point screws at the bottom. 6. Detach the battery cable. 7. Detach the sensor cable. 8. We take out the display and unscrew the motor cable. In this case, it is necessary not to damage the adhesive tape 9. Now we take out the old battery and put a new one in its place. 10. Then we assemble the phone in the reverse order. Then we check how the device works.

Read more:  How to distinguish iphone 5 from 5s

How to Replace the Battery on iPhone 7 Instructions

Step 6

Slide the trigger to the left along the bottom edge of the iPhone, cutting through the adhesive while holding the display in place.

Tighten the trigger to widen the gap between the display and the back case.

Step 9

  • Climb on the suction cup to lift the display and open the iPhone.
  • If you have used iSclack and it is still attached to iPhone, remove it now.
  • Do not lift the display more than 10º as there are ribbon cables connected to the right edge of the device connecting the display to the logic board.
  • Pull the small tip on the suction cup to remove it from the front panel.

Step 2 Opening iPhone

Heating the bottom edge of the iPhone will help soften the adhesive that holds the display and make it easier to open.

You can use a hair dryer or heat gun, or prepare the iOpener and apply it to the bottom edge of the iPhone for about a minute to soften the glue underneath.

Step 3 Open iPhone with iSclack

  • If you are planning to repair iPhone X (in kiev), we recommend you the iSclack tool.
  • Open the iSclack and place the device between the suction cups, inserting its plastic stopper.

Step 4

While holding the phone inside, pinch the handles of the tool. The front panel should pop out of the case.

How to change the battery on iPhone 7 and iPhone 7 Plus

Replacing the battery on the iPhone 7 and iPhone 7 Plus. Difficult but real.

If you notice, or know for sure thanks to this method, that the battery of your iPhone 7 or iPhone 7 Plus has outlived its life, then it must be replaced with a new one. This process is far from the easiest, but if you have experience in parsing smartphones and the right tools, you can cope with it at home. How to replace the battery on an iPhone 7 or iPhone 7 Plus was described in detail in this manual.

Difficulty: high. Time required: 30-120 minutes.

What is needed

  • Phillips (1.3mm, 1.6mm, and 1.9mm), 3.5mm five-point (Pentalobe), and three-point (1.2mm and 2.4mm) screwdrivers.
  • Dielectric blade (Spudger).
  • Sucker.
  • Blunt tweezers.
  • Plastic tool.
  • iOpener (or an alternative such as an electric heating pad).
  • New battery for iPhone 7 or iPhone 7 Plus.

How to change the battery on iPhone 7 and iPhone 7 Plus

Important! Before disassembling an iPhone 7 or iPhone 7 Plus, discharge your smartphone battery to below 25%. Even a half-charged lithium-ion battery can catch fire or explode if accidentally punctured.

Important! Opening the display on iPhone 7 or iPhone 7 Plus will damage the waterproof seals. If you don’t replace these seals, your smartphone will no longer be water resistant.

Turn off your smartphone and remove the two 3.5mm star screws near the Lightning connector.

Prepare the iOpener (or an alternative such as a heating pad) and place it on the edge of the front panel to loosen the adhesive that holds the display panel. Wait about a minute for the glue to heat up.

Attach a suction cup to the bottom half of the display above the Home button. Make sure the suction cup is not covering the button.

Pull on the suction cup to create a small gap between the display and the back bezel. Insert the flat edge of the dielectric blade into the gap that appears. Important! The waterproof adhesive that holds the display in place is very strong and requires significant effort to create an initial gap.

Swipe the dielectric spatula to the left along the bottom edge of the iPhone. Rotate the paddle 90 ° to widen the gap between the smartphone body and the bezel.

Swipe up on the left side of the iPhone. Important! Do not tamper with the top of the case as this could damage the plastic clips that secure the display.

Insert the flat edge of the dielectric spatula into the lower right corner of the iPhone case. Rotate the paddle 90 ° to widen the gap. Return the shoulder blade to its original position and slide it along the right side from bottom to top.

Pull lightly on the suction cup to lift the display and open the iPhone. Important! Do not lift the display more than 10 °, as there are cables on the right side of the device that connect the display to the motherboard.

Gently run a plastic tool (alternatively a plastic card) along the top edge of the iPhone between the back of the case and the display panel to remove any remaining glue. The screen must be held in place. Be careful not to damage the plastic clips on the top edge of the smartphone.

Pull the display down slightly to release the clips that secure it to the back of the case. Then open the iPhone by flipping the display up on the left side. Do not try to completely separate the display from the case, as ribbon cables still connect it to the motherboard.

Unscrew the following Y000 three-point screws from the bottom holder:

Using the sharp end of a plastic tool or tweezers, detach:

Unscrew the two 1.3 mm screws that secure the holder and remove it.

Disconnect the front panel sensor cable. Please note that when assembling, it is recommended to connect this cable over the entire area at once in order to minimize the risk of bending.

Completely remove the display that is no longer connected to the back of the case.

Unscrew the two 1.9 mm Phillips screws securing the barometric plug and remove it.

Detach the Taptic Engine ribbon cable.

Unscrew the three 1.6mm screws holding the Taptic Engine and remove it.

Important! Never use pointed tweezers, as this may puncture the battery. Using blunt tweezers, peel off one of the adhesive strips first on one side of the bottom edge of the battery:

Slowly while maintaining a constant tension, pull out one of the strips. For best results, pull the strip at an angle of 60 ° or less. Note that the strip will stretch to several times the size of the battery, so be prepared to grab it at the base and continue pulling. Important! Try not to twist the strips or stick to anything. Otherwise, the process of their extraction can be significantly difficult.

Repeat the previous step for the second strip while supporting the battery with your hand.

Remove the battery from the iPhone case, install the adhesive strips (how to do it), a new battery, and then reassemble the device in the reverse order.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram. Youtube.

change, battery, iphone