Battery level in percent on Samsung

How to put batteries on the Samsung Galaxy S8 charging percentage

The battery is the most important element of the smartphone. It depends on how long the device will work in autonomous mode, that is, without connecting to the mains. The level of charge allows you to monitor the line of the state where the icon is located in the form of the battery, which is either filled or depleted. Unfortunately, it does not allow you to determine the exact level. Therefore, it is recommended to enable the percentage of the battery charge on the Samsung Galaxy S8 in one of the ways described below.

The Samsung Galaxy S8 phone, like any other device on the Android 6 operating system, displays the charge level in the form of an icon. With its help, we can assume how much the battery is approximately charged: 100%, 75%, 50%and so on.

So that the system can display the exact percentage of charging, it is necessary to make the swipe from the upper part of the screen down. Then the notification curtain will open, and on the contrary, the battery icon will appear regarding the level of charge.

Despite the fact that the phone will always be able to show a percentage, this method is unlikely to be called convenient. After all, the user will have to lower the curtain every time to get acquainted with the exact charge. In this regard, it is recommended to pay attention to alternative methods of changing the icon, that the percentage has always been displayed. Even in the case when the notification curtain is closed.

Why is it convenient?

Galaxy S20 is supplied with 4000 mAh lithium battery, which is not so much, given its powerful characteristics of the device. Samsung compensated its users with a quick charge of 25 W, which can very quickly recharge the battery.

Nevertheless, you will still need to activate the percentage of the battery charge that will tell you if the battery level is low and you can use a fast charger to charging your S20.

How to save a battery charge and increase the duration of work on the Samsung Galaxy S9

The time will never come when the battery is discharged on your phone. Regardless of whether you have forgotten the charger at home or are idle for four hours on YouTube, no one wants to be attached to the outlet when using your smartphone.

In its current form, you can do a lot to reduce the battery charge on the Galaxy S9 or Galaxy S9 Plus. One of the reasons why we like this operating system is settings, freedom to really make our phone unique. So, let’s talk about how we can save the battery charge and save this percentage higher throughout the day.

Removing applications of non.Used applications

Depending on the reason why your battery loses the charge (perhaps it really discharges), try to unload some applications that you no longer use. Some third.Party applications will use so much battery life that your phone will not work properly until they are deleted.

Other third.Party applications, such as home screen launching products, can use more batteries because they offer animated home screens. If you have one of them, it is better to remove it.

Use energy conservation mode

If you go to “Settings” on your phone, you probably have an option in the “Battery” section to switch the battery charge mode. Android users have several options where Medium seems the best solution.

Do not forget to remove the “background update of the application” flag while you are here. This option will not allow applications working in the background to increase the battery life with constant updating.

Disconnect the functions that you do not need

This is an old, but, so to speak, positive hero. If you are on a long trip, turn off the Wi-Fi function so that your phone does not look for it constantly. If you do not use Bluetooth, turn off it too. If you have advanced additional processes that you really do not need, disconnect them.

The same applies to closing applications. Select the multitasking function in the lower left corner of the main screen and throw away all your applications (close them).

Through the settings

Making the percentage of batteries visible on an ongoing basis allow you to make the Samsung Galaxy A03 Core settings. If you have never used this option, then refer to the instructions:

This method works if you have updated your Samsung Galaxy A03 Core to Android 9 and a newer version of the operating system. If you use the old firmware, then the algorithm will be slightly different:

• Lower the notifications curtain.
• Press the gear icon and hold your finger on it for a few seconds.
• After about 5 seconds, you will get to the settings section, and the notification “System UI Tuner function is added to the bottom added to the settings menu”. This will become evidence that you managed to unlock the menu of advanced parameters.
• Now you need to go to System UI Tuner.
• Select the point “Status String”.
• Click on the battery function and activate the constant percentage of battery charging for the status.

When using modified firmware, the name of some menu items may differ. But this will not hurt to configure the displacement of interest on an ongoing basis. You just need to focus on the section “Battery” or “Battery“, and if necessary, you can use the search for settings.

Through the settings

Making the percentage of batteries visible on an ongoing basis allow you to make the Samsung Galaxy A8 settings (2018). If you have never used this option, then refer to the instructions:

This method works if you have updated your Samsung Galaxy A8 (2018) to Android 9 and the newer version of the operating system. If you use the old firmware, then the algorithm will be slightly different:

• Lower the notifications curtain.
• Press the gear icon and hold your finger on it for a few seconds.
• After about 5 seconds, you will get to the settings section, and the notification “System UI Tuner function is added to the bottom added to the settings menu”. This will become evidence that you managed to unlock the menu of advanced parameters.
• Now you need to go to System UI Tuner.
• Select the point “Status String”.
• Click on the battery function and activate the constant percentage of battery charging for the status.

When using modified firmware, the name of some menu items may differ. But this will not hurt to configure the displacement of interest on an ongoing basis. You just need to focus on the section “Battery” or “Battery”, and if necessary, you can use the search for settings.

The first method on the Samsung A50 Turn on the battery as a percentage

As always, with all the changes we go to the settings. It is easy to come across a gear icon in the form of a gear there.

He is found in the menu. We will assume that you found him. Now we are looking for a line “notifications”. Not far from above.

Found? Click on it. We need the parameter “Status String”. You will also see it quickly. Click.

Now the last step to move the slider opposite the line “show the percentage” to the right. All. Now check your Samsung A50 must submit a charge battery in numbers.

How to set the percentage of charging on Samsung A51

Having entered the “Settings” menu, you can configure a lot. In our case, we are going to go to the notification section.

From there, touch the status line. In this menu, in the lower part of the list there is a simple slider-switch, which, when turned on, displays the percentage of the battery in the line of the Galaxy A51 state.

If you go to the Play Store and download a free application called “Fast Settings”, you can add a shortcut to the battery menu to your quick settings, for example, from this in “shock”, and the Korean does not offer this.

After loading the application, press the side parameters in the lower part of the screen, press the “utilities”, and then the “battery“.

When the icon is added, open quick settings on your A51, tape the three.Point menu in the upper right corner, select the “buttons order” and drag the battery icon to the right place.

Only it will be added, this shortcut will open a schedule for using the battery when you click on it. Have a good day.

We display interest on Samsung A10 and A01

To show the Samsung A01 or A10 on the screen, how many battery charge is left, you need to open the “Settings” item.

However, you can simply hook the smartphone on top and pull the screen down, there they will also be displayed.

Only if they are always in sight, it is much more convenient, because in the 21st century we all became very lazy.

Therefore, after opening the settings, you will need to select the “Notifications” item on any of the described phones.

Then, dropping a little down, select the “Status Street” (the line line is just what is displayed on the screen at the very top).

Then also twist the screen down and notice the parameter “Show the percentage of charging”. There just move the switch (slider) to the right so that it turns from gray into blue.

All. Nothing else needs to be done. You coped. Congratulations. You can check. Now you always have interest on your screen. Success.