Asus zenwifi bridge mode. Eero 6 Plus Review: Now That s More Like It

How To Use An Asus Router As A Wi-Fi Bridge

How To Use An Asus Router As A Wi-Fi Bridge 800 600 Louis Louis October 11, 2022 January 14, 2023

If you want to use your Asus router as a Wi-Fi bridge, there are a few things you need to do. First, you need to make sure that your router is connected to the Internet and that the Wi-Fi is turned on. Next, you need to log into the router’s admin page. Once you’re logged in, go to the “Wireless” section and find the “Bridge Mode” option. Enable this option and then save your changes. Finally, connect your devices to the Wi-Fi network that your Asus router is creating.

Speeds are set to 802.11ac when using an 11ac network in Media Bridge mode. A client device can connect to the Media Bridge via a network connection for up to five hours. If you want to enable bridge mode, you must contact your Internet service provider. Once you’ve configured your Android device, you may need to find the Wi-Fi settings. In bridge mode, devices can communicate with one another over a single network. Building bridges enables segments to better network and make existing networks grow. The RT-AC68U is a leading wireless router in Europe.

A router’s network must be linked to your computer or mobile device. By entering your routing and username, as well as pressing Sign In, you will be able to see the address of your router. Asus Wi-Fi routers are available in a variety of functions.

Can I Use A Router As A Wi-Fi Bridge?

If you have an old router lying around that you can convert to a wireless bridge using DD-WRT, you can use a dedicated wireless bridge. For routers that do not have factory firmware, the DD-WRT operating system is free and allows them to be firmwared.

Bridging your wireless network improves range, efficiency, and bandwidth. The process here will be different depending on your router’s make and model. Two routers (but avoid using an old one) will be required. The primary device is your computer, while the secondary device is your modem. A step-by-step guide for connecting your secondary router to your primary router. Many newer routers include wireless distributed services (WDS) or wireless distributed services (WDS) in order to accommodate multiple Access Points across a network. While bridge mode is supported by Google products, it may be difficult to use a mesh router as your primary router for security reasons.

Routers: Bridge Mode And Using As A Wi-Fi Adapte

Bridge Mode is the term used for this type of connectivity. You can use bridge mode to connect two routers at the same time. It essentially turns a router into a switch by turning it on and off. The bridge-enabled router will still transmit data, but it will not perform traditional Network Access Translation (NAT) processes. Can I use my Wi-Fi router as a wireless networking device? In essence, all you need to do is plug in the firmware software on your router to turn it into a wireless adapter. Because most official firmware does not support this feature, you must obtain and install some high-quality third-party software to do so.

Asus Router Bridge Mode

Asus routers come with a feature called Bridge Mode that allows the router to function as a switch. This can be useful if you want to connect multiple devices to the router, but do not want the router to manage the traffic between them. In order to use Bridge Mode, you will need to connect the router to a switch or hub.

Eero 6 Set up, Walkthrough, and Review

How To Setup Asus Wi-Fi Extender

If you want to extend the range of your Asus router, you can do so by using a wireless repeater. A wireless repeater essentially takes the signal from your router and amplifies it, allowing for greater range and coverage. To set up a wireless repeater, you will need to connect it to your router using an Ethernet cable. Once it is connected, you will need to configure it using the Asus Repeater Utility. This process will vary depending on your model of repeater, so be sure to consult the documentation that came with your device.

How To Reset Your Asus Wi-Fi Extende

It is now extremely simple to reset a Asus wireless extender. The reset button is located on the device’s side and must be pressed and held for five seconds. The device will be reinstalled as a result, and it will be able to function normally. Furthermore, if you want to access the repeater mode, go to Administration – Options.

Asus Bridge Mode Vs Access Point

The distinction is important because a wireless access point is responsible for establishing a wireless signal that can be used by users to connect to a network. A bridge, on the other hand, connects a separate network between all of the devices connected to it, such as your wireless home network.

Bridge Mode and access point are not the same thing. Using an Ethernet cable, the router and the access point are linked. A wireless bridge is an important component of the router. As a result, each mode has its own set of functions that must be performed in order to work properly. I believe that for sure it has some loss of internet, what about from wire? When using a router acess point in a room 10 meters from the main router, an internet connection should be 1 meter away from the laptop. For Ethernet cables, there is a cost.

To put it another way, it is always preferable to use Ethernet as much as possible. When you want to use your laptop and phone at the same time, having access point is critical. It is preferable to use ethernet cable in bridge mode for high-speed internet, regardless of access point. However, the reality is that it is ‘generally true’ to say so.

What Is Asus Bridge Mode?

What is Media Bridge mode? With Media bridge mode, the Asus router enables multiple entertainment devices to connect to the same 802.11ac Wi-Fi network at the same time. To use Media bridge mode, you must first configure a Media station on an Asus Router and then configure a router as well.

Two Modes Of Router: Bridge And Route

Bridge mode is useful for people with limited Wi-Fi access points. Bridge mode allows you to connect devices in your home or office to the Internet via a router. In some cases, you may be able to use this because you have multiple devices that require Internet access but don’t have enough range to connect with your router. Devices connected via a router mode are unable to communicate with the Internet. It is the mode used to connect to a public Wi-Fi network, which is something that most people are familiar with. Essentially, using a router mode allows your router to connect you to the Internet. Bridge modes are used to connect devices within a network while router modes are used to connect devices to the Internet at large, so there are significant distinctions between these two modes. In other words, if your Wi-Fi network is limited and you only want to connect devices in your home or office to the Internet, using a bridge mode is the best option for you. If you want to connect devices to the Internet at large, you should use a router mode.

What Is The Main Benefit Of Using A Bridge Over An Access Point?

Bandwidth is managed by a bridge that reduces unnecessary data flow between network segments and thereby eliminates bandwidth waste. This ensures that the network segment has the best performance on both sides.

5 Benefits Of Using An Access Point To Extend Your Wireless Coverage

If a company needs to expand its wireless coverage, an access point is an excellent option. You can expand the reach of an existing network by connecting an access point to it. You will add a lot of users to your network and have a faster connection as a result. Similarly, an access point can be used to boost the signal for devices that are far away from the router. Wall or other obstruction can be a problem for wireless signal reception in this case.

What Is Asus Access Point Mode?

In Access Point (AP) mode, an Asus repeater device connects to a router via an Ethernet cable to extend the wireless signal coverage to other network clients. The firewall, IP sharing, and NAT functions can all be disabled by default in this mode.

Asus Router Access Point Mode

Asus router access point mode is a great way to extend the range of your wireless network. By connecting your Asus router to another wireless router, you can create an extended network that covers a larger area. This is ideal for large homes or offices where you need to be able to connect to the Internet from multiple locations.

What Is The Difference Between Wireless Router Mode And Access Point Mode?

The main distinction between router mode and access point mode (AP mode) is that router mode manages the creation and transmission of your home network. AP mode allows you to extend your wireless signal’s reach by acting as a relay and modifying your software by simply changing its settings.

Can I Use My Asus Router As An Access Point?

The Asus RT-AC68U can also serve as a repeater and a router, making it a dual-use device.

Asus Wireless Router

Asus is a computer hardware and electronics company that produces a variety of devices, including wireless routers. Asus routers are known for their reliability and performance, and are a popular choice among home and small business users. Asus offers a variety of different models to suit different needs, and their routers are generally easy to set up and use.

With this offer, Asus ROG Rapture GT-AX6000 Wireless Router can be purchased for 32 off, or for only 36.50 with coupon code AS77VSNGPM. The RT-AX55 AX1800 Dual Band Wi-Fi 6 Gigabit Router includes 802.11ax, Lifetime internet security, parental controls, Mesh Wi-Fi, MU-MIMO, OFDMA, 4 Gigabit LAN Ports, Beamforming, and so on. Asus wireless routers are an ideal choice for offices, educational facilities, and homes. Both of the router’s bandwidths can be used for high-speed upload and download. A heavy-duty CPU ensures that routers have the most functional components. The high battery life of a modem/gateway or router can improve its dependability. Wireless networking products that support USB 2.0 and USB 3.0 can connect to your computer, eliminating the need for cables or wires. All employees can access the internet from anywhere in a router thanks to a variety of external antennas. With the Asus router app, you can manage and monitor your router network from anywhere.

Is The Asus Rt-ax88u The Best Router For You?

The Asus RT-AX88U router is an excellent choice for anyone looking for a high-performance router that provides excellent features and performance. Users who require the best possible Wi-Fi experience will appreciate how sophisticated this router is. Furthermore, its easy-to-use management software makes it simple to set up and configure your network. However, the RT-AX88U may not be suitable for everyone due to its high price.

I’m a content writer who has eight years of experience creating compelling articles and short stories. I’m continuously searching for new topics and stories to capture the attention of new readers. With my knowledge and experience, I can help you fulfill your content creation goals.

Eero 6 Plus Review: Now That’s Like It

Editors’ Choice: Eero‘s latest Wi-Fi 6 mesh router delivers faster, more reliable speeds than the system that preceded it.

Originally hailing from Troy, Ohio, Ry Crist is a writer, a text-based adventure connoisseur, a lover of terrible movies and an enthusiastic yet mediocre cook. A CNET editor since 2013, Ry’s beats include Smart home tech, lighting, appliances, broadband and home networking.

Eero 6 Plus mesh router


  • Simple setup and control via Eero app
  • Consistent speeds and enough oomph for gigabit networks
  • 160MHz channel support has a positive effect on performance
  • Matter support and built-in Zigbee hub are great for Smart homes

Don’t like

  • Routing to the wrong extender can cause slight slowdowns
  • No option to limit Eero’s data collection

Product details

  • Wi-Fi Standard Wi-Fi 6
  • Speed Rating AX3000
  • Range Up to 1,500 sq. ft.
  • Wireless Networking Security WPA2, WPA3
  • Bands Dual-Band (2.4 and 5GHz)

Amazon’s Eero 6 had the right ingredients back in 2020, as mesh routers were starting to surge in popularity. The design was simple and inoffensive, the app was disarmingly easy to use, it offered full support for Wi-Fi 6 and, at 279 for a three-pack, it wasn’t terribly expensive. The only problem I had with it was its habit of routing my connection through the wrong extender at the wrong time during my battery of performance tests, which caused its average speeds to deflate like a defeated soufflé.

Now, Amazon is back, and it seems to have beaten the eggs a bit better than before. The new Eero 6 Plus system still isn’t perfect at steering connections through the best extender for the job, but few mesh routers are (particularly dual-Band systems like the 6 Plus), and this time, the issue is much less severe. Overall, it’s much improved and much easier for me to recommend, especially at its current sale price of 195.

One big reason for the Eero’s improvement is its new support for 160MHz channel width, up from 80MHz last time around. That’s the key part of the Plus pitch, and it means that the system can now move data twice as efficiently to 160MHz-compatible devices, of which there are many. Even without devices like that on your network, you’ll still benefit from the faster connection between the Eero devices themselves. That, combined with a faster-than-before AX3000 build, means that your speeds won’t drop as much if the Eero 6 Plus routes your connection through an extender that’s three rooms away instead of one that’s one room away.

Locating local internet providers

That was my experience at home, where I put the Eero 6 Plus through the same spate of tests that the Eero 6 went through two years ago. Last time around, a huge disparity in performance between the tests where I connected close to the router versus those where I connected far from it caused the system to return download speeds throughout my house that averaged just 196 megabits per second, which isn’t great for a 300Mbps fiber network, where the fastest devices I test tend to max out at about 375Mbps at close range. The Eero 6 Plus cranked that whole-home average all the way up to 304Mbps. That’s top 10 among the 30 or so mesh routers that I’ve tested at home over the past few years.- and none of the systems that beat its speeds can beat its value.

All of that makes the Eero 6 Plus an excellent choice for anyone looking to upgrade to Wi-Fi 6 or to a mesh network. That’s especially true if you live in a multistory home, where that third device would prove particularly useful (the other noteworthy Wi-Fi 6 system I recommend in this 200-300 price range, the TP-Link Deco W7200. only nets you two devices instead of three). A strong Smart home acumen via Amazon’s frustration-free setup. support for the upcoming Matter protocol and the built-in Zigbee radio for pairing things like lights and locks with your network are just the icing on the cake (or the sauce on the soufflé, if you will). Bottom line: The Eero 6 Plus keeps everything that the Eero 6 got right, and it executes on the promise of strong, consistent speeds much better than before.

Locating local internet providers

Design, specs and app controls

The Eero 6 Plus is available now at 195 for a three-pack, 155 for a two-pack or 90 for a single device. Each unit is identical, so you can use any of them as either an extender or the main router of the system. They’re 99% identical to the Eero 6 devices that came before them, too.- the same glossy white plastic, the same curved design, the same solo indicator light (white means all right, blue means pairing mode and red means uh oh). I wouldn’t fault anyone for calling the things uninspired, but they aren’t ugly or bulky or cheap-looking, and they shouldn’t have much trouble blending in with most home decor.

As for the hardware. the Eero 6 Plus boasts an AX3000 build, which is up from AX1800 with the first-gen Eero 6. The AX part tells you that the router supports 802.11ax, or Wi-Fi 6; the number after it tells you the combined top speeds of each of the bands (2.4GHz and 5GHz). Though I haven’t had the chance to test it out on a gigabit network yet, an AX3000 speed rating is more than enough to top out a connection like that. Meanwhile, the system powers those radios with a 1GHz dual-core processor, 512MB of RAM and 4GB of storage. As for range, Amazon says that a three-piece setup should be enough to cover up to 4,500 square feet.

You’ll find your ports in the back.- namely, the USB-C power jack and two gigabit Ethernet ports on each device. Those Ethernet ports set a speed limit for the incoming connection, so if you’re thinking about upgrading to a multigig internet plan sometime soon, then you’ll want to skip the 6 Plus and consider spending more to get the Eero Pro 6E, or another router with a multigig Ethernet jack capable of handling speeds like those (the Asus ZenWiFi XT8, the TP-Link Deco X90 and the Netgear Orbi AX6000 are all well-reviewed models that fit the bill).

This brings us to Eero‘s app, which you’ll use to set the system up, monitor its performance and adjust its settings. With a nice-looking design and intuitive access to controls and settings, it’s one of the better app options in the router category, and it makes quick work of the setup process. Just tap your way through the instructions, plug things in when instructed to, pick out a network name and password and update to the latest firmware build, and your network will up and running in a matter of minutes.

From there, you’ll be able to use the app to see which devices are connected to your network, or group them into specific profiles for purposes like ad blocking and parental controls. The app also makes it easy to track your speeds and your data usage, which is particularly helpful if your internet plan comes with a data cap. You can turn on WPA3 encryption in the Eero Labs section of the app for the latest in network security and, if you like, you can subscribe to Eero Secure Plus for advanced options for ad blocking and threat detection, plus access to additional services like 1Password and the VPN.

As for privacy, Eero’s support page explains that it doesn’t track the websites you visit or the contents of your network traffic, though the company does collect network data to help maintain and improve system performance. Some of that data includes personal data from the app, like your email and device IP addresses, but the company draws some lines with how that information gets used.

We don’t sell our customer data, and we don’t sell ads based on this data, the support page reads. We collect data about your Eero network to help us optimize your Wi-Fi performance.

Other manufacturers offer an option to limit data collection or opt out of it altogether, but there’s no such option with Eero. Additionally, per the company’s privacy policy, you can email to request deletion of your personal data, but doing so means you won’t be able to use your Eero devices anymore. None of that would stop me from using the system in my home, but if you’re especially privacy-conscious and trying to limit data collection among your devices as much as you can, Eero probably isn’t the best fit.

Performance and speed

To get a sense of just how much Plus we’re talking about here, I tested the Eero 6 Plus at my home in Louisville, Kentucky, the same place where I tested the Eero 6 system two years ago. It’s a 1,300-square-foot home, and I tested it on the same 300Mbps fiber internet plan, though the true speed limit seems to be more like 375Mbps. Once I’ve had a chance to test the system out in the much larger CNET Smart Home, I’ll update this section with some additional data.

With the router set up in my front-of-house living room and a single extender hooked up in the back-of-the-house bedroom, I spent a few days running speed tests across five rooms, following the same procedure for testing routers that I always use. One key point of my methodology: I run multiple rounds of tests across multiple days of testing, and I split those rounds into two groups.- ones where I start with a fresh connection in the living room, near the router, and ones where I start my connection in the back of the house near the extender. Doing so gives me a good look at how the system adjusts my connection as I move from room to room.

When I tested the Eero 6, those two sets of tests produced hugely different results. My speeds were fine when I started my connection in the living room and worked back, but if I started in the back of the house and worked my way to the front, it would route my connection through the extender even after I’d returned to the living room, with the router just a few feet away. I saw some of that same issue with the Eero 6 Plus, but the resulting slowdowns were much less drastic, and, typically, by the time I reached the living room in those back-to-front tests, the system would realize it and begin routing my connection straight to the nearby router.

Eero mesh wifi: Do I regret buying it? 3 Reasons you shouldn’t get it.

Consequently, the Eero 6 Plus finished with much stronger average speeds than the Eero 6 did. Overall, its average download speed to my Wi-Fi 6 test laptop was 304Mbps, where it was only 196Mbps with the Eero 6. The system’s average upload speed was slightly less impressive at 253Mbps, but that’s still a fine result.- better than the 204Mbps I saw from the Eero 6, and better than well-reviewed systems like the TP-Link Deco W7200 (248Mbps), Nest Wi-Fi (230Mbps) and Asus ZenWiFi XD6 (224Mbps). Speeds were predictably a bit slower but still decent when I ran my tests to a Wi-Fi 5 client device, too.- average downloads of 288Mbps and average uploads of 208Mbps. Only five systems did better than that in my at-home tests, and all of them are costlier tri-Band systems.

What about gigabit speeds?

I recently upgraded my home’s fiber network from that 300Mbps connection to a gigabit connection, with max download speeds of 940Mbps and max upload speeds of 880Mbps. Those are the speeds that I’ll be using for my router tests moving forward, so I made sure to retest the Eero 6 Plus.

Testing across the same five spots in my home, the system finished with average download speeds of 427Mbps and average upload speeds of 380Mbps. That’s slightly better than the TP-Link Deco W7200. one of my top overall mesh router recommendations, but slower than fancier systems that cost more, including the Eero Pro 6E. the Netgear Orbi AX6000 and the TP-Link Deco XE75. All three of those were able to push my average downloads well above 500Mbps.

Still, even if it isn’t as capable of taking advantage of a gigabit connection as some systems are, the Eero 6 Plus nets you great performance for the price.- and I was pleased that, once again, the Band-steering issues were quite limited. It’s a better pick for, say, a 500Mbps network, but even with a gigabit connection, your home’s Wi-Fi will feel plenty fast with the Eero 6 Plus.

Now we’re cooking

I have tasted the Eero 6 Plus soufflé.- it’s fluffy and satisfying.

Overcooked metaphors aside, this is an excellent mesh system for the money, and a strong step up from what the Eero 6 initially had to offer. Setup is a cinch thanks to the Eero app, and performance held tall across multiple days of tests. Smart home users should appreciate the built-in Zigbee radio, and users of all kinds will benefit from the system’s ability to move more data at once than before.

At 195 for a three-pack, there’s plenty of value here, particularly given that a lot of other top-performing systems cost more for a two-pack. Since the system is backward-compatible with previous generations, I also like the idea that people who already own an Eero system can pick up a 6 Plus device whenever those go on sale and swap it into their setup. Either way, the Eero 6 Plus is well worth considering, and a great option for anyone looking for a faster connection at home.

How to Setup Asus RT-AC68U as an Access Point and Repeater

Asus RT-AC68U is a powerful Wi-Fi router that houses a Broadcom Wi-Fi chipset (BCM4709). This router claims to provide speeds up to 1.3Gbps on the 5 GHz frequency Band and 600Mbps on the 2.4 GHz frequency Band. And as most advanced Wi-Fi routers go, the Asus RT-AC68U can also double up as Wi-Fi repeater and an access point.

In this post today, we’ll explore how to set up the Repeater and Access Point mode.

What is a Wi-Fi Repeater

A Wi-Fi repeater is used to extend the Wi-Fi coverage in a specific area. They work wirelessly by connecting to the existing network, amplifying it and transmitting the signal further.

It’s advised to keep the repeater in an area where the Wi-Fi signal is strong. For instance, in a long corridor or a large space, if the signal doesn’t extend beyond a certain point, then you can install repeater to extend the coverage. This will eliminate dropped signals and dead zones.

Now that we have cleared that up let’s see how to set up the Asus RT-AC68U as a repeater.

asus, zenwifi, bridge, mode, eero

How to Setup Asus RT-AC68U as a Repeater

Prerequisite: Make sure that the parent Wi-Fi network is already set up.

Step 1: In the case of a brand new router with no prior setup and connection history, you’ll need to first connect it to a laptop (or PC) through an Ethernet cable via the LAN port.

However, if the router has been set up previously, power it on and wait for it to start up. Once it is ready, connect to the old Wi-Fi network. Do note that there will be no internet access at this point.

asus, zenwifi, bridge, mode, eero

Step 2: Now, sign in to the router admin page ( using your username password and head over to Administration on the left pane.

asus, zenwifi, bridge, mode, eero

Next select Operation Mode, tap on Repeater mode and hit Save.

Step 3: The router will now scan the nearby networks.

Having located the network that you want the RT-AC68U to repeat, select it, enter the password and hit the Connect button.

Next, you’ll be prompted to enter the IP address. For an easy way out, check Yes to fill up the IP address automatically.

Step 4: Also, if you want to have the same settings as the parent router, check the ‘Use the default settings’ checkbox. The settings include Channel bandwidth, WPA encryption method, and other such parameters.

Applying the new settings may take some time. In my case, it took the router about five minutes to set up itself as a repeater, after which I could see it among my network settings and could connect to it normally with the same password.

Again, you’ll need to open the admin page via

Also, you can take a look at some plug play Wi-Fi extenders such as the TP-Link AC750 which makes it easy to extend the Wi-Fi network coverage. Here’s one you can consider.

TP-Link AC750 Wi-Fi Extender

The TP-Link AC750 is a plug-and-play Wi-Fi extender that works with any standard router. It doesn’t require any length setup process. With nearly 7,557 customer reviews, this product has been more than 58% positive reviews.

What Is an Access Point

Apart from extending the Wi-Fi coverage area, access points can also be used to increase the number of connected users and devices. However, the access point router needs an Ethernet cable to connect to the parent modem or router. And it is this cable helps transform the wired signal into a wireless one.

Quick Fact

Step 1: First up, connect the Asus RT-AC68U via its WAN port to the LAN port of parent router or modem.

Next, log in to the admin page and head over to Administration Operation Mode, select the radio button for Access Point and hit Save.

Step 2: Now, you will be prompted to enter the IP address. A click on the Yes button will fill up the IP address and other details (you guessed it right!) automatically.

But if you wish to insert these details manually, select No and add the details.

Step 3: Now, all you need to do is think of the name of the new network and the password.

Do note that special characters and space in router passwords generally do not work well for the connected devices and you’ll experience peripherals like wireless printers failing to establish a connection.

Once everything is set up, just hit the Apply button.

Bonus Point: Save Router Settings

Backing up your Wi-Fi router settings is a good habit, lest someday you choose to revert to the original settings. Thankfully there’s a way to backup settings in the Asus RT-AC68U.

Head over to Administration and go to the third tab (Restore/Save/Upload Setting).

Clicking on Save will save a CFG file to your system. All you need to do is to upload the same to your chosen Cloud account so that it can be easily retrieved later.

The next time you want to restore the setting to a previous iteration, upload the same file through the Restore window.

Stretch Your Range

Weak Wi-Fi signals can really get into one’s nerves. If it can’t be fixed by simple tweaks such as changing the location or by changing the router channels, getting a repeater is the best way to go forward.

Next up: Did you know you can prioritize Wi-Fi networks on your Windows 10 PC? Check how to do it in the post below.

TP-Link AC750 Wi-Fi Extender

The TP-Link AC750 is a plug-and-play Wi-Fi extender that works with any standard router. It doesn’t require any length setup process. With nearly 7,557 customer reviews, this product has been more than 58% positive reviews.

Last updated on 03 February, 2022

The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.

How to Setup Two Asus Router as AiMesh in Access Point Mode?

Please let me know that how to setup two Asus router as AiMesh in access point mode. I am facing some issues while doing this. Help me.

Setup two Asus Router as AiMesh in Access Point Mode:

What is the Asus router’s operation mode?

To fulfill a variety of needs, some routers offer a variety of operating modes.

Operation mode:

Range extender mode (Repeater mode)

There is no support if it is not specified in the specification table.

What is Access Point(AP) Mode?

AiMesh Routers in AP mode use an Ethernet cable to connect to a wireless router and spread the wireless signal to other network clients. IP sharing and NAT are disabled by default in the firewall. How you can set up two Asus Routers as AiMesh in Access Point mode are shown below.

After setting up the router as a repeater, the router’s IP address will be changed; to locate the router’s IP address, first download and install the Device Discovery Utility.

Set the Mesh router to AP mode, then make sure the front router/modem has a working DHCP server. Because the mesh system’s IP addresses should all be routed through the front router/modem.

Step 1: Open a web browser and type into the address bar.

Step 2: You will be automatically directed to the Quick Internet Setup (QIS) page when you first log in to the Web GUI. Select [Advanced Settings] from the drop-down menu.

Step 3: By clicking [Choose operation mode].

Step 4: Click [Access Point(AP) mode]

Step 5: Click [Automatic IP]

Step 6: To set up a distinct SSID, click there.

Step 7: You’ll need to set up your username and password for the login router for the first time. Click [Next] when you’re finished typing. The configuration of the Access Point(AP) mode is complete.

In AP mode, How can I Get into the Router’s GUI?

After completing the AP mode setup, check to see if the 1st ax92U is connected correctly and receiving an IP address from the front router.

Step 1: Connect your PC to the router using Wi-Fi or an Ethernet connection after launching the Asus Device Discovery utility.

After you’ve connected your computer to the router, click the Search button to identify your wireless router’s IP address, and then click IP address.

Step 2: Enter your router’s username and password on the login page, then click [Sign In].

Step 3: To add the 2nd AX92U as a mesh node, go to the 1st AX92U (AP mode) setup page and click the AiMesh icon. [Search] will be selected.

Step 4: Click the 2nd AX92U, and Apply.